📦 linux-manual

B (continued)

• bnx2x_vlan_mac_h_read_lock(9)lock the vlan mac head list reader lock✨
• bnx2x_vlan_mac_h_read_unlock(9)unlock the vlan mac head list reader lock✨
• bnx2x_vlan_mac_restore(9)reconfigure next MAC/VLAN/VLAN-MAC element✨
• bnx2x_vlan_mac_set_cmd_hdr_e2(9)set a header in a single classify ramrod✨
• bnx2x_vlan_mac_set_rdata_hdr_e1x(9)set a header in a single classify ramrod✨
• bnx2x_vlan_mac_set_rdata_hdr_e2(9)set the classify ramrod data header✨
• bnx2x_wait_sp_comp(9)wait for the outstanding SP commands.✨
• bnx2x_wait_vlan_mac(9)passively wait for 5 seconds until all work completes.✨
• bnxt_io_error_detected(9)called when PCI error is detected✨
• bnxt_io_resume(9)called when traffic can start flowing again.✨
• bnxt_io_slot_reset(9)called after the pci bus has been reset.✨
• bnxt_qplib_map_rc(9)map return type based on opcode✨
• bnxt_qplib_rcfw_send_message(9)qplib interface to send and complete rcfw command.✨
• bnxt_re_is_fw_stalled(9)Check firmware health✨
• board(9)✨
• board_added(9)Called after a board has been added to the system.✨
• board_assembly_show(9)board assembly name✨
• board_info(9)✨
• board_name_show(9)board name✨
• board_replaced(9)Called after a board has been replaced in the system.✨
• board_tracer_show(9)board tracer number✨
• bond_3ad_adapter_speed_duplex_changed(9)handle a slave's speed / duplex change indication✨
• bond_3ad_bind_slave(9)initialize a slave's port✨
• bond_3ad_handle_link_change(9)handle a slave's link status change indication✨
• bond_3ad_initialize(9)initialize a bond's 802.3ad parameters and structures✨
• bond_3ad_initiate_agg_selection(9)initate aggregator selection✨
• bond_3ad_rx_indication(9)handle a received frame✨
• bond_3ad_set_carrier(9)set link state for bonding master✨
• bond_3ad_state_machine_handler(9)handle state machines timeout✨
• bond_3ad_unbind_slave(9)deinitialize a slave's port✨
• bond_3ad_update_ad_actor_settings(9)reflect change of actor settings to ports✨
• bond_3ad_update_lacp_active(9)change the lacp active✨
• bond_3ad_update_lacp_rate(9)change the lacp rate✨
• bond_advance_esn_state(9)ESN support for IPSec HW offload✨
• bond_agg_timer_advance(9)advance agg_select_timer✨
• bond_alb_handle_active_change(9)assign new curr_active_slave✨
• bond_change_active_slave(9)change the active slave into the specified one✨
• bond_choose_primary_or_current(9)select the primary or high priority slave✨
• bond_dev_queue_xmit(9)Prepare skb for xmit.✨
• bond_find_best_slave(9)select the best available slave to be the active one✨
• bond_for_each_slave(9)iterate over all slaves✨
• bond_get_slave_by_id(9)get xmit slave with slave_id✨
• bond_ipsec_add_sa(9)program device with a security association✨
• bond_ipsec_del_sa(9)clear out this specific SA✨
• bond_ipsec_dev(9)Get active device for IPsec offload✨
• bond_ipsec_offload_ok(9)can this packet use the xfrm hw offload✨
• bond_opt_get(9)get a pointer to an option✨
• bond_opt_parse(9)parse option value✨
• bond_opt_tryset_rtnl(9)try to acquire rtnl and call __bond_opt_set✨
• bond_rr_gen_slave_id(9)generate slave id based on packets_per_slave✨
• bond_select_active_slave(9)select a new active slave, if needed✨
• bond_set_dev_addr(9)clone slave's address to bond✨
• bond_sk_hash_l34(9)generate a hash value based on the socket's L3 and L4 fields✨
• bond_vlan_rx_add_vid(9)Propagates adding an id to slaves✨
• bond_vlan_rx_kill_vid(9)Propagates deleting an id to slaves✨
• bond_xfrm_update_stats(9)Update xfrm state✨
• bond_xmit_hash(9)generate a hash value based on the xmit policy✨
• bond_xmit_hash_xdp(9)generate a hash value based on the xmit policy✨
• boot_kstrtoul(9)convert a string to an unsigned long✨
• boot_override_clock(9)Compatibility layer for deprecated boot option✨
• boot_override_clocksource(9)boot clock override✨
• bootconfig_cmdline_requested(9)Was "bootconfig" passed on the cmdline?✨
• bootflag_show(9)Get function for sysfs attribute bootflag✨
• bootflag_store(9)Set function for sysfs attribute bootflag✨
• boottime_show(9)Get function for sysfs attribute boottime✨
• boottime_store(9)Set function for sysfs attribute boottime✨
• borrow_pbn_lock_from_pool(9)Borrow a PBN lock from the pool and initialize it with the provided type.✨
• bos_desc(9)prepares the BOS descriptor.✨
• bpf_arena_map_kern_vm_start(9)kern_vm_start lookup by struct bpf_map *✨
• bpf_binprm_select_interp(9)run this exec under an interpreter the entry bound✨
• bpf_binprm_set_flags(9)choose the interpreter invocation flags for this exec✨
• bpf_binprm_set_interp(9)select the interpreter for the current exec✨
• bpf_binprm_set_interp_arg(9)set a single argument for the interpreter✨
• bpf_cgroup_acquire(9)Acquire a reference to a cgroup. A cgroup acquired by this kfunc which is not stored in a map as a kptr, must be released by calling bpf_cgroup_release().✨
• bpf_cgroup_ancestor(9)Perform a lookup on an entry in a cgroup's ancestor array. A cgroup returned by this kfunc which is not subsequently stored in a map, must be released by calling bpf_cgroup_release().✨
• bpf_cgroup_from_id(9)Find a cgroup from its ID. A cgroup returned by this kfunc which is not subsequently stored in a map, must be released by calling bpf_cgroup_release().✨
• bpf_cgroup_read_xattr(9)read xattr of a cgroup's node in cgroupfs✨
• bpf_cgroup_release(9)Release the reference acquired on a cgroup. If this kfunc is invoked in an RCU read region, the cgroup is guaranteed to not be freed until the current grace period has ended, even if its refcount…✨
• bpf_check_classic(9)verify socket filter code✨
• bpf_convert_filter(9)convert filter program✨
• bpf_copy_from_user_str(9)Copy a string from an unsafe user address✨
• bpf_copy_from_user_task_str(9)Copy a string from an task's address space✨
• bpf_cpumask_acquire(9)Acquire a reference to a BPF cpumask.✨
• bpf_cpumask_and(9)AND two cpumasks and store the result.✨
• bpf_cpumask_any_and_distribute(9)Return a random set CPU from the AND of two cpumasks.✨
• bpf_cpumask_any_distribute(9)Return a random set CPU from a cpumask.✨
• bpf_cpumask_clear(9)Clear all of the bits in a BPF cpumask.✨
• bpf_cpumask_clear_cpu(9)Clear a bit for a CPU in a BPF cpumask.✨
• bpf_cpumask_copy(9)Copy the contents of a cpumask into a BPF cpumask.✨
• bpf_cpumask_create(9)Create a mutable BPF cpumask.✨
• bpf_cpumask_empty(9)Check if a cpumask is empty.✨
• bpf_cpumask_equal(9)Check two cpumasks for equality.✨
• bpf_cpumask_first(9)Get the index of the first nonzero bit in the cpumask.✨
• bpf_cpumask_first_and(9)Return the index of the first nonzero bit from the AND of two cpumasks.✨
• bpf_cpumask_first_zero(9)Get the index of the first unset bit in the cpumask.✨
• bpf_cpumask_full(9)Check if a cpumask has all bits set.✨
• bpf_cpumask_intersects(9)Check two cpumasks for overlap.✨
• bpf_cpumask_or(9)OR two cpumasks and store the result.✨
• bpf_cpumask_populate(9)Populate the CPU mask from the contents of a BPF memory region.✨
• bpf_cpumask_release(9)Release a previously acquired BPF cpumask.✨
• bpf_cpumask_set_cpu(9)Set a bit for a CPU in a BPF cpumask.✨
• bpf_cpumask_setall(9)Set all of the bits in a BPF cpumask.✨
• bpf_cpumask_subset(9)Check if a cpumask is a subset of another.✨
• bpf_cpumask_test_and_clear_cpu(9)Atomically test and clear a CPU in a BPF cpumask.✨
• bpf_cpumask_test_and_set_cpu(9)Atomically test and set a CPU in a BPF cpumask.✨
• bpf_cpumask_test_cpu(9)Test whether a CPU is set in a cpumask.✨
• bpf_cpumask_weight(9)Return the number of bits in @cpumask.✨
• bpf_cpumask_xor(9)XOR two cpumasks and store the result.✨
• bpf_crypto_ctx_acquire(9)Acquire a reference to a BPF crypto context.✨
• bpf_crypto_ctx_create(9)Create a mutable BPF crypto context.✨
• bpf_crypto_ctx_release(9)Release a previously acquired BPF crypto context.✨
• bpf_crypto_decrypt(9)Decrypt buffer using configured context and IV provided.✨
• bpf_crypto_encrypt(9)Encrypt buffer using configured context and IV provided.✨
• bpf_dynptr_copy(9)Copy data from one dynptr to another.✨
• bpf_dynptr_from_skb_meta(9)Initialize a dynptr to the skb metadata area.✨
• bpf_dynptr_memset(9)Fill dynptr memory with a constant byte.✨
• bpf_dynptr_slice(9)Obtain a read-only pointer to the dynptr data.✨
• bpf_dynptr_slice_rdwr(9)Obtain a writable pointer to the dynptr data.✨
• bpf_get_dentry_xattr(9)get xattr of a dentry✨
• bpf_get_file_xattr(9)get xattr of a file✨
• bpf_get_fsverity_digest(9)read fsverity digest of file✨
• bpf_get_mem_cgroup(9)Get a reference to a memory cgroup✨
• bpf_get_root_mem_cgroup(9)Returns a pointer to the root memory cgroup✨
• bpf_get_task_exe_file(9)get a reference on the exe_file struct file member of the mm_struct that is nested within the supplied task_struct✨
• bpf_icmp_send(9)Send an ICMP control message✨
• bpf_iter_bits_destroy(9)Destroy a bpf_iter_bits✨
• bpf_iter_bits_new(9)Initialize a new bits iterator for a given memory area✨
• bpf_iter_bits_next(9)Get the next bit in a bpf_iter_bits✨
• bpf_iter_scx_dsq_destroy(9)Destroy a DSQ iterator✨
• bpf_iter_scx_dsq_new(9)Create a DSQ iterator✨
• bpf_iter_scx_dsq_next(9)Progress a DSQ iterator✨
• bpf_key_put(9)decrement key reference count if key is valid and free bpf_key✨
• bpf_ksock_acquire(9)Acquire a reference to a BPF kernel socket.✨
• bpf_ksock_connect(9)Connect a BPF kernel socket to a remote address.✨
• bpf_ksock_create(9)Create a BPF kernel socket.✨
• bpf_ksock_release(9)Release a BPF kernel socket.✨
• bpf_ksock_send(9)Send data through a BPF kernel socket.✨
• bpf_list_push_back(9)add a node to the back of a BPF linked list✨
• bpf_list_push_front(9)add a node to the front of a BPF linked list✨
• bpf_lookup_system_key(9)lookup a key by a system-defined ID✨
• bpf_lookup_user_key(9)lookup a key by its serial✨
• bpf_mem_cgroup_flush_stats(9)Flush memory cgroup's statistics✨
• bpf_mem_cgroup_memory_events(9)Read memory cgroup's memory event value✨
• bpf_mem_cgroup_page_state(9)Read memory cgroup's page state counter✨
• bpf_mem_cgroup_usage(9)Read memory cgroup's usage✨
• bpf_mem_cgroup_vm_events(9)Read memory cgroup's vm event counter✨
• bpf_obj_drop(9)drop a previously allocated object✨
• bpf_obj_new(9)allocate an object described by program BTF✨
• bpf_path_d_path(9)resolve the pathname for the supplied path✨
• bpf_percpu_obj_drop(9)drop a previously allocated percpu object✨
• bpf_percpu_obj_new(9)allocate a percpu object described by program BTF✨
• bpf_prog_arena(9)return the bpf_map of the arena referenced by @prog✨
• bpf_prog_array_delete_safe_at(9)Replaces the program at the given index into the program array with a dummy no-op program.✨
• bpf_prog_array_update_at(9)Updates the program at the given index into the program array.✨
• bpf_prog_create(9)create an unattached filter✨
• bpf_prog_create_from_user(9)create an unattached filter from user buffer✨
• bpf_prog_select_runtime(9)select exec runtime for BPF program✨
• bpf_put_file(9)put a reference on the supplied file✨
• bpf_put_mem_cgroup(9)Put a reference to a memory cgroup✨
• bpf_rbtree_add(9)add a node to a BPF rbtree✨
• bpf_real_data_inode(9)get the real inode hosting a file's data✨
• bpf_refcount_acquire(9)turn a local kptr into an owning reference✨
• bpf_remove_dentry_xattr(9)remove a xattr of a dentry✨
• bpf_remove_dentry_xattr_locked(9)remove a xattr of a dentry✨
• bpf_set_dentry_xattr(9)set a xattr of a dentry✨
• bpf_set_dentry_xattr_locked(9)set a xattr of a dentry✨
• bpf_skb_meta_pointer(9)Gets a mutable pointer within the skb metadata area.✨
• bpf_sock_read_xattr(9)read xattr of a socket's inode in sockfs✨
• bpf_strcasecmp(9)Compare two strings, ignoring the case of the characters✨
• bpf_strcasestr(9)Find the first substring in a string, ignoring the case of the characters✨
• bpf_strchr(9)Find the first occurrence of a character in a string✨
• bpf_strchrnul(9)Find and return a character in a string, or end of string✨
• bpf_strcmp(9)Compare two strings✨
• bpf_strcspn(9)Calculate the length of the initial substring of @s__ign which does not contain letters in @reject__ign✨
• bpf_strlen(9)Calculate the length of a string✨
• bpf_strncasestr(9)Find the first substring in a length-limited string, ignoring the case of the characters✨
• bpf_strnchr(9)Find a character in a length limited string✨
• bpf_strnlen(9)Calculate the length of a length-limited string✨
• bpf_strnstr(9)Find the first substring in a length-limited string✨
• bpf_strrchr(9)Find the last occurrence of a character in a string✨
• bpf_strspn(9)Calculate the length of the initial substring of @s__ign which only contains letters in @accept__ign✨
• bpf_strstr(9)Find the first substring in a string✨
• bpf_struct_ops_for_each_prog(9)Invoke @cb for each member prog✨
• bpf_task_acquire(9)Acquire a reference to a task. A task acquired by this kfunc which is not stored in a map as a kptr, must be released by calling bpf_task_release().✨
• bpf_task_from_pid(9)Find a struct task_struct from its pid by looking it up in the root pid namespace idr. If a task is returned, it must either be stored in a map, or released with bpf_task_release().✨
• bpf_task_from_vpid(9)Find a struct task_struct from its vpid by looking it up in the pid namespace of the current task. If a task is returned, it must either be stored in a map, or released with bpf_task_release().✨
• bpf_task_get_cgroup1(9)Acquires the associated cgroup of a task within a specific cgroup1 hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID.✨
• bpf_task_release(9)Release the reference acquired on a task.✨
• bpf_task_under_cgroup(9)wrap task_under_cgroup_hierarchy() as a kfunc, test task's membership of cgroup ancestry.✨
• bpf_task_work_schedule_resume(9)Schedule BPF callback using task_work_add with TWA_RESUME mode✨
• bpf_task_work_schedule_signal(9)Schedule BPF callback using task_work_add with TWA_SIGNAL mode✨
• bpf_timer_cancel_async(9)try to deactivate a timer✨
• bpf_verify_pkcs7_signature(9)verify a PKCS#7 signature✨
• bpf_wakeup_sources_get_head(9)Get the head of the wakeup sources list✨
• bpf_wakeup_sources_read_lock(9)Acquire the SRCU lock for wakeup sources✨
• bpf_wakeup_sources_read_unlock(9)Release the SRCU lock for wakeup sources✨
• bpf_xdp_metadata_rx_hash(9)Read XDP frame RX hash.✨
• bpf_xdp_metadata_rx_timestamp(9)Read XDP frame RX timestamp.✨
• bpf_xdp_metadata_rx_vlan_tag(9)Get XDP packet outermost VLAN tag✨
• bpf_xdp_pull_data(9)Pull in non-linear xdp data.✨