📦 linux-manual

82568 pages · page 362 of 413

T (continued)

t4_identify_port(9)identify a VI's port by blinking its LED✨
t4_idma_monitor(9)monitor SGE Ingress DMA state✨
t4_idma_monitor_init(9)initialize SGE Ingress DMA Monitor✨
t4_init_devlog_params(9)initialize adapter->params.devlog✨
t4_init_portinfo(9)allocate a virtual interface and initialize port_info✨
t4_init_sge_params(9)initialize adap->params.sge✨
t4_init_tp_params(9)initialize adap->params.tp✨
t4_intr_disable(9)disable interrupts✨
t4_intr_enable(9)enable interrupts✨
t4_intr_handler(9)select the top-level interrupt handler✨
t4_iq_free(9)free an ingress queue and its FLs✨
t4_iq_stop(9)stop an ingress queue and its FLs✨
t4_is_inserted_mod_type(9)is a plugged in Firmware Module Type✨
t4_link_acaps(9)compute Link Advertised Port Capabilities✨
t4_link_down_rc_str(9)return a string for a Link Down Reason Code✨
t4_link_l1cfg_core(9)apply link configuration to MAC/PHY✨
t4_load_boot(9)download boot flash✨
t4_load_cfg(9)download config file✨
t4_load_fw(9)download firmware✨
t4_load_mtus(9)write the MTU and congestion control HW tables✨
t4_load_phy_fw(9)download port PHY firmware✨
t4_mdio_rd(9)read a PHY register through MDIO✨
t4_mdio_wr(9)write a PHY register through MDIO✨
t4_memory_rw(9)read/write EDC 0, EDC 1 or MC via PCIE memory window✨
t4_memory_rw_init(9)Get memory window relative offset, base, and size.✨
t4_memory_rw_residual(9)Read/Write residual data.✨
t4_memory_update_win(9)Move memory window to specified address.✨
t4_mgmt_tx(9)send a management message✨
t4_ofld_eq_free(9)free an offload egress queue✨
t4_ofld_send(9)send an offload packet✨
t4_os_set_hw_addr(9)store a port's MAC address in SW✨
t4_phy_fw_ver(9)return current PHY firmware version✨
t4_pktgl_free(9)free a packet gather list✨
t4_pmrx_get_stats(9)returns the HW stats from PMRX✨
t4_pmtx_get_stats(9)returns the HW stats from PMTX✨
t4_prep_adapter(9)prepare SW and HW for operation✨
t4_query_params_rw(9)query FW or device parameters✨
t4_read_cim_ibq(9)read the contents of a CIM inbound queue✨
t4_read_cim_obq(9)read the contents of a CIM outbound queue✨
t4_read_cimq_cfg(9)read CIM queue configuration✨
t4_read_cong_tbl(9)reads the congestion control table✨
t4_read_flash(9)read words from serial flash✨
t4_read_indirect(9)read indirectly addressed registers✨
t4_read_mtu_tbl(9)returns the values in the HW path MTU table✨
t4_read_pace_tbl(9)read the pace table✨
t4_read_reg(9)read a HW register✨
t4_read_reg64(9)read a 64-bit HW register✨
t4_read_rss(9)read the contents of the RSS mapping table✨
t4_read_rss_key(9)read the global RSS key✨
t4_read_rss_pf_config(9)read PF RSS Configuration Table✨
t4_read_rss_pf_map(9)read PF RSS Map✨
t4_read_rss_pf_mask(9)read PF RSS Mask✨
t4_read_rss_vf_config(9)read VF RSS Configuration Table✨
t4_read_sge_dbqtimers(9)read SGE Doorbell Queue Timer values✨
t4_record_mbox(9)record a Firmware Mailbox Command/Reply in the log✨
t4_restart_aneg(9)restart autonegotiation✨
t4_rx_hststamp(9)Recv PTP Event Message✨
t4_seeprom_wp(9)enable/disable EEPROM write protection✨
t4_set_addr_hash(9)program the MAC inexact-match hash filter✨
t4_set_hw_addr(9)store a port's MAC address in SW✨
t4_set_params(9)sets FW or device parameters✨
t4_set_params_timeout(9)sets FW or device parameters✨
t4_set_reg_field(9)set a register field to a value✨
t4_set_rxmode(9)set Rx properties of a virtual interface✨
t4_set_trace_filter(9)configure one of the tracing filters✨
t4_set_vf_mac_acl(9)Set MAC address for the specified VF✨
t4_set_vlan_acl(9)Set a VLAN id for the specified VF✨
t4_sge_alloc_eth_txq(9)allocate an Ethernet TX Queue✨
t4_sge_ctxt_flush(9)flush the SGE context cache✨
t4_sge_ctxt_rd_bd(9)read an SGE context bypassing FW✨
t4_sge_decode_idma_state(9)decode the idma state✨
t4_sge_eth_txq_egress_update(9)handle Ethernet TX Queue update✨
t4_sge_init(9)initialize SGE✨
t4_sge_init_soft(9)grab core SGE values needed by SGE code✨
t4_sge_stop(9)disable SGE operation✨
t4_shutdown_adapter(9)shut down adapter, host & wire✨
t4_slow_intr_handler(9)control path interrupt handler✨
t4_systim_to_hwstamp(9)read hardware time stamp✨
t4_tp_fw_ldst_rw(9)Access TP indirect register through LDST✨
t4_tp_get_cpl_stats(9)read TP's CPL MIB counters✨
t4_tp_get_err_stats(9)read TP's error MIB counters✨
t4_tp_get_rdma_stats(9)read TP's RDMA MIB counters✨
t4_tp_get_tcp_stats(9)read TP's TCP MIB counters✨
t4_tp_indirect_rw(9)Read/Write TP indirect register through LDST or backdoor✨
t4_tp_mib_read(9)Read TP MIB registers✨
t4_tp_pio_read(9)Read TP PIO registers✨
t4_tp_pio_write(9)Write TP PIO registers✨
t4_tp_read_la(9)read TP LA capture buffer✨
t4_tp_tm_pio_read(9)Read TP TM PIO registers✨
t4_tp_wr_bits_indirect(9)set/clear bits in an indirect TP register✨
t4_tx_completion_handler(9)handle CPL_SGE_EGR_UPDATE messages✨
t4_tx_hststamp(9)Loopback PTP Transmit Event Message✨
t4_update_port_info(9)retrieve and update port information if changed✨
t4_wait_op_done_val(9)wait until an operation is completed✨
t4_wr_mbox_meat_timeout(9)send a command to FW through the given mailbox✨
t4_write_flash(9)write up to a page of data to the serial flash✨
t4_write_indirect(9)write indirectly addressed registers✨
t4_write_reg(9)write a HW register✨
t4_write_reg64(9)write a 64-bit HW register✨
t4_write_rss_key(9)program one of the RSS keys✨
t4vf_alloc_mac_filt(9)allocates exact-match filters for MAC addresses✨
t4vf_alloc_vi(9)allocate a virtual interface on a port✨
t4vf_bar2_sge_qregs(9)return BAR2 SGE Queue register information✨
t4vf_calc_tx_flits(9)calculate the number of flits for a packet TX WR✨
t4vf_change_mac(9)modifies the exact-match filter for a MAC address✨
t4vf_config_rss_range(9)configure a portion of the RSS mapping table✨
t4vf_enable_pi(9)enable/disable a Port's virtual interface✨
t4vf_enable_vi(9)enable/disable a virtual interface✨
t4vf_eth_eq_free(9)free an Ethernet egress queue✨
t4vf_eth_xmit(9)add a packet to an Ethernet TX queue✨
t4vf_ethrx_handler(9)process an ingress ethernet packet✨
t4vf_fl_pkt_align(9)return the fl packet alignment✨
t4vf_free_mac_filt(9)frees exact-match filters of given MAC addresses✨
t4vf_free_sge_resources(9)free SGE resources✨
t4vf_free_vi(9)- free a virtual interface✨
t4vf_fw_reset(9)issue a reset to FW✨
t4vf_get_dev_params(9)retrieve device paremeters✨
t4vf_get_port_stats(9)collect "port" statistics✨
t4vf_get_rss_glb_config(9)retrieve adapter RSS Global Configuration✨
t4vf_get_sge_params(9)retrieve adapter Scatter gather Engine parameters✨
t4vf_get_vf_mac_acl(9)Get the MAC address to be set to the VI of this VF.✨
t4vf_get_vf_vlan_acl(9)Get the VLAN ID to be set to the VI of this VF.✨
t4vf_get_vfres(9)retrieve VF resource limits✨
t4vf_get_vpd_params(9)retrieve device VPD paremeters✨
t4vf_handle_fw_rpl(9)process a firmware reply message✨
t4vf_handle_get_port_info(9)process a FW reply message✨
t4vf_identify_port(9)identify a VI's port by blinking its LED✨
t4vf_intr_handler(9)select the top-level interrupt handler✨
t4vf_iq_free(9)free an ingress queue and its free lists✨
t4vf_is_eth_imm(9)can an Ethernet packet be sent as immediate data?✨
t4vf_link_down_rc_str(9)return a string for a Link Down Reason Code✨
t4vf_pktgl_free(9)free a packet gather list✨
t4vf_pktgl_to_skb(9)build an sk_buff from a packet gather list✨
t4vf_port_init(9)initialize port hardware/software state✨
t4vf_query_params(9)query FW or device parameters✨
t4vf_read_rss_vi_config(9)read a VI's RSS configuration✨
t4vf_record_mbox(9)record a Firmware Mailbox Command/Reply in the log✨
t4vf_set_addr_hash(9)program the MAC inexact-match hash filter✨
t4vf_set_params(9)sets FW or device parameters✨
t4vf_set_rxmode(9)set Rx properties of a virtual interface✨
t4vf_sge_alloc_eth_txq(9)allocate an SGE Ethernet TX Queue✨
t4vf_sge_alloc_rxq(9)allocate an SGE RX Queue✨
t4vf_sge_init(9)initialize SGE✨
t4vf_sge_start(9)enable SGE operation✨
t4vf_sge_stop(9)disable SGE operation✨
t4vf_update_port_info(9)retrieve and update port information if changed✨
t4vf_wr_mbox_core(9)send a command to FW through the mailbox✨
t4vf_write_rss_vi_config(9)write a VI's RSS configuration✨
t7xx_cldma_exception(9)CLDMA exception handler.✨
t7xx_cldma_hw_init(9)Initialize CLDMA HW.✨
t7xx_cldma_hw_restore(9)Restore CLDMA HW registers.✨
t7xx_cldma_init(9)Initialize CLDMA.✨
t7xx_cldma_q_reset(9)Reset CLDMA request pointers to their initial values.✨
t7xx_cldma_send_skb(9)Send control data to modem.✨
t7xx_cldma_set_recv_skb(9)Set the callback to handle RX packets.✨
t7xx_cldma_start(9)Start CLDMA.✨
t7xx_cldma_stop(9)Stop CLDMA.✨
t7xx_dpmaif_bat_alloc(9)Allocate the BAT ring buffer.✨
t7xx_dpmaif_hif_init(9)Initialize data path.✨
t7xx_dpmaif_hw_get_intr_cnt(9)Reads interrupt status and count from HW.✨
t7xx_dpmaif_hw_init(9)Initialize HW data path API.✨
t7xx_dpmaif_hw_stop_all_rxq(9)Stop all RX queues.✨
t7xx_dpmaif_hw_stop_all_txq(9)Stop all TX queues.✨
t7xx_dpmaif_rx_buf_alloc(9)Allocate buffers for the BAT ring.✨
t7xx_dpmaif_rx_frag_alloc(9)Allocates buffers for the Fragment BAT ring.✨
t7xx_dpmaif_rx_stop(9)Suspend RX flow.✨
t7xx_dpmaif_tx_send_skb(9)Add skb to the transmit queue.✨
t7xx_dpmaif_txq_init(9)Initialize TX queue.✨
t7xx_md_init(9)Initialize modem.✨
t7xx_pci_disable_sleep(9)Disable deep sleep capability.✨
t7xx_pci_enable_sleep(9)Enable deep sleep capability.✨
t7xx_pci_mhccif_isr(9)Process MHCCIF interrupts.✨
t7xx_pcie_mac_atr_init(9)Initialize address translation.✨
t7xx_pcie_mac_clear_int_status(9)Clear interrupt status by type.✨
t7xx_pcie_mac_clear_set_int(9)Clear/set interrupt by type.✨
t7xx_pcie_mac_enable_disable_int(9)Enable/disable interrupts.✨
t7xx_pcie_set_mac_msix_cfg(9)Write MSIX control configuration.✨
t7xx_port_enqueue_skb(9)Enqueue the received skb into the port's rx_skb_list.✨
t7xx_port_enum_msg_handler(9)Parse the port enumeration message to create/remove nodes.✨
t7xx_port_proxy_init(9)Initialize ports.✨
t7xx_port_proxy_md_status_notify(9)Notify all ports of state.✨
t7xx_port_proxy_recv_skb(9)Dispatch received skb.✨
t7xx_port_proxy_recv_skb_from_dedicated_queue(9)Dispatch early port received skb.✨
t_show_filters(9)seq_file callback to display active event filters✨
t_show_triggers(9)seq_file callback to display active event triggers✨
TABLE_DAL_INIT(9)Full TABLE_DAL_INIT payload transferred from SMU to DRAM.✨
table_path_del(9)delete a path from the mesh or mpp table✨
TABLE_SOC_UTM(9)SoC UTM QoS table.✨
tag_pages_for_writeback(9)tag pages to be written by writeback✨
take_gc_lnum(9)reserve GC LEB.✨
take_ihead(9)update the status of the index head in lprops to 'taken'.✨
talitos_submit(9)submits a descriptor to the device for processing✨
target -> host extended statistics upload(9)✨
target_cmd_size_check(9)Check whether there will be a residual.✨
target_for_each_device(9)iterate over configured devices✨
target_get_sess_cmd(9)Verify the session is accepting cmds and take ref✨
target_init_cmd(9)initialize se_cmd✨
target_put_sess_cmd(9)decrease the command reference count✨
target_queue_submission(9)queue the cmd to run on the LIO workqueue✨
target_send_busy(9)Send SCSI BUSY status back to the initiator✨