📦 linux-manual

82568 pages · page 287 of 413

S (continued)

set_supply(9)set regulator supply regulator✨
set_swbp(9)store breakpoint at a given address.✨
set_system_power_state(9)set system wide power state✨
set_task_slice_keep_oob(9)Set @p's slice, leaving any pending oob request✨
set_termios(9)set termios values for a tty✨
set_timeout(9)set single byte / total timeouts on the adapter✨
set_trigger_filter(9)Generic event_command @set_filter implementation✨
set_tv_freq(9)Set tuner frequency, freq in Units of 62.5 kHz = 1/16MHz✨
set_type(9)Sets the tuner type for a given device✨
set_up_interrupts(9)Initialize the IRQ resources and state✨
set_update_marker(9)set update marker.✨
set_var(9)apply LCD properties like rotation and BGR mode✨
set_wiphy_dev(9)set device pointer for wiphy✨
set_worker_desc(9)set description for the current work item✨
set_worker_dying(9)Tag a worker for destruction✨
set_write_to_gram_reg(9)initialize the display to write the GRAM✨
set_xex_data_unit_size(9)Set the data unit size for XEX mode in data_out_addr[15:0]✨
set_xor_active(9)Set the XOR indicator bit in the descriptor✨
set_xor_val(9)Set the word for the XOR operation.✨
setactive(9)Write handler for "ipe/policies/$name/active".✨
setattr_copy(9)copy simple metadata updates into the generic inode✨
setattr_copy_mgtime(9)update timestamps for mgtime inodes✨
setattr_prepare(9)check if attribute changes to a dentry are allowed✨
setattr_should_drop_sgid(9)determine whether the setgid bit needs to be removed✨
setattr_should_drop_suidgid(9)determine whether the set{g,u}id bit needs to be dropped✨
setaudit(9)Write handler for the securityfs node, "ipe/success_audit"✨
setenforce(9)Write handler for the securityfs node, "ipe/enforce"✨
setup_adaptive_interrupts(9)Setup interrupt suppression✨
setup_address_map(9)Set Address Map by querying ADDRMAP registers.✨
setup_apcb(9)Create a shadow copy of the apcb.✨
setup_apcb00(9)Copy to APCB FORMAT0 from APCB FORMAT0✨
setup_apcb11(9)Copy the FORMAT1 APCB from the guest to the shadow CRYCB✨
setup_areas(9)Map the spu regions into the address space.✨
setup_cgroup_environment(9)Setup the cgroup environment✨
setup_classid_environment(9)Setup the cgroupv1 net_cls environment✨
setup_destroy_sysfs(9)create a kobject with the SRM bin file attached✨
setup_earlycon(9)match and register earlycon console✨
setup_i2c_controller(9)setup the controller✨
setup_ima_buffer(9)add IMA buffer information to the fdt✨
setup_kdump_cmdline(9)Prepend "elfcorehdr=<addr> " to command line of kdump kernel for exporting the core.✨
setup_link_status_change_wq(9)Sets up the mtu status change work✨
setup_local_APIC(9)setup the local APIC✨
setup_machine_fdt(9)Machine setup when an dtb was passed to the kernel✨
setup_metric_events(9)Find a group of events in metric_evlist that correspond to the IDs from a parsed metric expression.✨
setup_mm_hdr(9)Allocate a buffer for StandAloneMM and initialize the header data.✨
setup_new_fdt_ppc64(9)Update the flattend device-tree of the kernel being loaded.✨
setup_nic_devices(9)Setup network interfaces✨
setup_numa_memblock(9)Set up a memory layout with multiple NUMA nodes in a previously allocated dummy physical memory.✨
setup_ohci1394_dma(9)enables early OHCI1394 DMA initialization✨
SETUP_PC_GUCRC(9)✨
setup_per_zone_wmarks(9)called when min_free_kbytes changes or when memory is hot-{added|removed}✨
setup_physmem(9)Setup physical memory for UML✨
setup_purgatory(9)initialize the purgatory's global variables✨
setup_purgatory_ppc64(9)initialize PPC64 specific purgatory's global variables and call setup_purgatory() to initialize common global variable.✨
setup_qp_page_tables(9)iscsi QP page table setup function✨
setup_queue_timers(9)Setup interrupt timers✨
setup_rss(9)configure RSS✨
setup_sge_qsets(9)configure SGE Tx/Rx/response queues✨
setup_sge_queues(9)configure SGE Tx/Rx/response queues✨
setup_stub_dpm(9)Initialize a stub DPM environment for testing✨
setup_sync_octeon_time_wq(9)prepare work to periodically update local time to octeon firmware✨
setup_tx_poll_fn(9)Sets up the txq poll check✨
sev_do_cmd(9)issue an SEV or an SEV-SNP command✨
sev_guest_activate(9)perform SEV ACTIVATE command✨
sev_guest_deactivate(9)perform SEV DEACTIVATE command✨
sev_guest_decommission(9)perform SEV DECOMMISSION command✨
sev_guest_df_flush(9)perform SEV DF_FLUSH command✨
sev_issue_cmd_external_user(9)issue SEV command by other driver with a file handle.✨
sev_module_init(9)perform PSP SEV module initialization✨
sev_platform_init(9)perform SEV INIT command✨
sev_platform_status(9)perform SEV PLATFORM_STATUS command✨
sf1_read(9)read data from the serial flash✨
sf1_write(9)write data to the serial flash✨
sf_pdma_irq_init(9)Init PDMA IRQ Handlers✨
sf_pdma_setup_chans(9)Init settings of each channel✨
sfp_bus_add_upstream(9)parse and register the neighbouring device✨
sfp_bus_del_upstream(9)Delete a sfp bus✨
sfp_bus_find_fwnode(9)parse and locate the SFP bus from fwnode✨
sfp_bus_put(9)put a reference on the &struct sfp_bus✨
sfp_get_module_eeprom(9)Read the SFP module EEPROM✨
sfp_get_module_eeprom_by_page(9)Read a page from the SFP module EEPROM✨
sfp_get_module_info(9)Get the ethtool_modinfo for a SFP module✨
sfp_get_name(9)Get the SFP device name✨
sfp_select_interface(9)Select appropriate phy_interface_t mode✨
sfp_upstream_set_signal_rate(9)set data signalling rate✨
sfp_upstream_start(9)Inform the SFP that the network device is up✨
sfp_upstream_stop(9)Inform the SFP that the network device is down✨
SFSIOCFWVERS(9)returns blob containing FW versions ASP provides the current level of Base Firmware for the ASP and the other microprocessors as well as current patch level(s).✨
SFSIOCUPDATEPKG(9)updates package/payload ASP loads, verifies and executes the SFS package. By default, the SFS package/payload is loaded from /lib/firmware/amd, but alternative firmware loading path can be…✨
sg2042_clk_pll_recalc_rate(9)recalc_rate callback for pll clks✨
sg2042_get_pll_ctl_setting(9)Based on the given FOUTPISTDIV and the input FREF to calculate the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl register.✨
sg2042_pll_get_postdiv_1_2(9)Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table to get the closest postdiiv combination.✨
sg2042_pll_recalc_rate(9)Calculate rate for plls✨
sg_alloc_append_table_from_pages(9)Allocate and initialize an append sg table from an array of pages✨
sg_alloc_table(9)Allocate and initialize an sg table✨
sg_alloc_table_chained(9)Allocate and chain SGLs in an sg table✨
sg_alloc_table_from_pages(9)Allocate and initialize an sg table from an array of pages✨
sg_alloc_table_from_pages_segment(9)Allocate and initialize an sg table from an array of pages and given maximum segment.✨
sg_assign_page(9)Assign a given page to an SG entry✨
sg_chain(9)Chain two sglists together✨
sg_copy_buffer(9)Copy data between a linear buffer and an SG list✨
sg_copy_from_buffer(9)Copy from a linear buffer to an SG list✨
sg_copy_to_buffer(9)Copy from an SG list to a linear buffer✨
sg_display (int)(9)✨
sg_dma_is_bus_address(9)Return whether a given segment was marked as a bus address✨
sg_dma_is_swiotlb(9)Return whether the scatterlist was marked for SWIOTLB bouncing✨
sg_dma_mark_bus_address(9)Mark the scatterlist entry as a bus address✨
sg_dma_mark_swiotlb(9)Mark the scatterlist for SWIOTLB bouncing✨
sg_dma_unmark_bus_address(9)Unmark the scatterlist entry as a bus address✨
sg_free_append_table(9)Free a previously allocated append sg table.✨
sg_free_table(9)Free a previously allocated sg table✨
sg_free_table_chained(9)Free a previously mapped sg table✨
sg_init_marker(9)Initialize markers in sg table✨
sg_init_one(9)Initialize a single entry sg list✨
sg_init_table(9)Initialize SG table✨
sg_last(9)return the last scatterlist entry in a list✨
sg_mark_end(9)Mark the end of the scatterlist✨
sg_miter_next(9)proceed mapping iterator to the next mapping✨
sg_miter_skip(9)reposition mapping iterator✨
sg_miter_start(9)start mapping iteration over a sg list✨
sg_miter_stop(9)stop mapping iteration✨
sg_nents(9)return total count of entries in scatterlist✨
sg_nents_for_dma(9)return the count of DMA-capable entries in scatterlist✨
sg_nents_for_len(9)return total count of entries in scatterlist needed to satisfy the supplied length✨
sg_next(9)return the next scatterlist entry in a list✨
sg_page_iter_dma_address(9)get the dma address of the current page held by the page iterator.✨
sg_page_iter_page(9)get the current page held by the page iterator✨
sg_pcopy_from_buffer(9)Copy from a linear buffer to an SG list✨
sg_pcopy_to_buffer(9)Copy from an SG list to a linear buffer✨
sg_phys(9)Return physical address of an sg entry✨
sg_scsi_ioctl(9)- handle deprecated SCSI_IOCTL_SEND_COMMAND ioctl✨
sg_set_buf(9)Set sg entry to point at given data✨
sg_set_folio(9)Set sg entry to point at given folio✨
sg_set_page(9)Set sg entry to point at given page✨
sg_split(9)split a scatterlist into several scatterlists✨
sg_unmark_end(9)Undo setting the end of the scatterlist✨
sg_virt(9)Return virtual address of an sg entry✨
sg_zero_buffer(9)Zero-out a part of a SG list✨
sge_rx(9)process an ingress ethernet packet✨
sge_rx_timer_cb(9)perform periodic maintenance of SGE RX queues✨
sge_timer_rx(9)perform periodic maintenance of an SGE qset✨
sge_timer_tx(9)perform periodic maintenance of an SGE qset✨
sge_tx_timer_cb(9)perform periodic maintenance of SGE Tx queues✨
sget_dev(9)Find or create a superblock by device number✨
sget_fc(9)Find or create a superblock✨
sgl_alloc(9)allocate a scatterlist and its pages✨
sgl_alloc_order(9)allocate a scatterlist and its pages✨
sgl_free(9)free a scatterlist and its pages✨
sgl_free_n_order(9)free a scatterlist and its pages✨
sgl_free_order(9)free a scatterlist and its pages✨
sgl_len(9)calculates the size of an SGL of the given capacity✨
sgp_measure_iaq(9)measure and retrieve IAQ values from sensor The caller must hold data->data_lock for the duration of the call.✨
sgp_read_cmd(9)reads data from sensor after issuing a command The caller must hold data->data_lock for the duration of the call.✨
sgp_verify_buffer(9)verify the checksums of the data buffer words✨
sgx_alloc_epc_page(9)Allocate an EPC page✨
sgx_alloc_va_page(9)Allocate a Version Array (VA) page✨
sgx_alloc_va_slot(9)allocate a VA slot✨
sgx_encl_alloc_backing(9)create a new backing storage page✨
sgx_encl_cpumask(9)Query which CPUs might be accessing the enclave✨
sgx_encl_eaug_page(9)Dynamically add page to initialized enclave✨
sgx_encl_free_epc_page(9)free an EPC page assigned to an enclave✨
sgx_encl_lookup_backing(9)retrieve an existing backing storage page✨
sgx_encl_may_map(9)Check if a requested VMA mapping is allowed✨
sgx_encl_put_backing(9)Unpin the backing storage✨
sgx_encl_release(9)Destroy an enclave instance✨
sgx_encl_remove_pages(9)Remove trimmed pages from SGX enclave✨
sgx_encl_test_and_clear_young(9)Test and reset the accessed bit✨
sgx_enclave_modify_types(9)Modify type of SGX enclave pages✨
sgx_enclave_restrict_permissions(9)Restrict EPCM permissions✨
sgx_enclave_user_handler_t(9)Exit handler function accepted by __vdso_sgx_enter_enclave()✨
SGX_ENCLS_FAULT_FLAG(9)flag signifying an ENCLS return code is a trapnr✨
sgx_free_epc_page(9)Free an EPC page✨
sgx_free_va_slot(9)free a VA slot✨
sgx_ioc_enclave_add_pages(9)The handler for %SGX_IOC_ENCLAVE_ADD_PAGES✨
sgx_ioc_enclave_create(9)handler for %SGX_IOC_ENCLAVE_CREATE✨
sgx_ioc_enclave_init(9)handler for %SGX_IOC_ENCLAVE_INIT✨
sgx_ioc_enclave_modify_types(9)handler for %SGX_IOC_ENCLAVE_MODIFY_TYPES✨
sgx_ioc_enclave_provision(9)handler for %SGX_IOC_ENCLAVE_PROVISION✨
sgx_ioc_enclave_remove_pages(9)handler for %SGX_IOC_ENCLAVE_REMOVE_PAGES✨
sgx_ioc_enclave_restrict_permissions(9)handler for %SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS✨
sgx_mark_page_reclaimable(9)Mark a page as reclaimable✨
sgx_set_attribute(9)Update allowed attributes given file descriptor✨
sgx_unmark_page_reclaimable(9)Remove a page from the reclaim list✨
sgx_update_svn(9)Attempt to call ENCLS[EUPDATESVN].✨
sgx_va_page_full(9)is the VA page full?✨
sgx_virt_ecreate(9)Run ECREATE on behalf of guest✨
sgx_virt_einit(9)Run EINIT on behalf of guest✨
sgx_zap_enclave_ptes(9)remove PTEs mapping the address from enclave✨
sh_bios_vbr_reload(9)Re-load the system VBR from the BIOS vector.✨
sh_early_platform_add_devices(9)adds a number of early platform devices✨
sh_early_platform_driver_probe(9)probe a class of registered drivers✨
sh_early_platform_driver_probe_id(9)probe drivers matching class_str and id✨
sh_early_platform_driver_register(9)register early platform driver✨
sh_early_platform_driver_register_all(9)register early platform drivers✨
sh_early_platform_left(9)check if early platform driver has matching devices✨
sh_early_platform_match(9)find early platform device matching driver✨
sh_wdt_read_cnt(9)Read from Counter Reads back the WTCNT value.✨
sh_wdt_read_csr(9)Read from Control/Status Register✨
sh_wdt_read_rstcsr(9)Read from Reset Control/Status Register✨
sh_wdt_write_bst(9)Write to Counter✨