📦 linux-manual

82568 pages · page 272 of 413

R (continued)

rpc_mkpipe_dentry(9)make an rpc_pipefs file for kernel<->userspace communication✨
rpc_net_ns(9)Get the network namespace for this RPC client✨
rpc_ntop(9)construct a presentation address in @buf✨
rpc_peeraddr(9)extract remote peer address from clnt's xprt✨
rpc_peeraddr2str(9)return remote peer address in printable format✨
rpc_prepare_reply_pages(9)Prepare to receive a reply data payload into pages✨
rpc_pton(9)Construct a sockaddr in @sap✨
rpc_queue_upcall(9)queue an upcall message to userspace✨
rpc_release_client(9)release a reference on an rpc_clnt✨
rpc_remove_client_dir(9)Remove a directory created with rpc_create_client_dir()✨
rpc_remove_pipe_dir_object(9)remove a rpc_pipe_dir_object from a directory✨
rpc_run_bc_task(9)Allocate a new RPC task for backchannel use, then run rpc_execute against it✨
rpc_run_task(9)Allocate a new RPC task, then run rpc_execute against it✨
rpc_sockaddr2uaddr(9)Construct a universal address string from @sap.✨
rpc_switch_client_transport(9)switch the RPC transport on the fly✨
rpc_uaddr2sockaddr(9)convert a universal address to a socket address.✨
rpc_unlink(9)remove a pipe✨
rpc_update_rtt(9)Update an RPC RTT estimator context✨
rpc_wake_up(9)wake up all rpc_tasks✨
rpc_wake_up_locked(9)wake up all rpc_tasks✨
rpc_wake_up_queued_task_set_status(9)wake up a task and set task->tk_status✨
rpc_wake_up_status(9)wake up all rpc_tasks and set their status value.✨
rpc_wake_up_status_locked(9)wake up all rpc_tasks and set their status value.✨
rpc_xprt_switch_add_xprt(9)Add a new rpc_xprt to an rpc_xprt_switch✨
rpc_xprt_switch_get_main_xprt(9)Get the 'main' xprt for an xprt switch.✨
rpc_xprt_switch_remove_xprt(9)Removes an rpc_xprt from a rpc_xprt_switch✨
rpc_xprt_switch_set_roundrobin(9)Set a round-robin policy on rpc_xprt_switch✨
rpcauth_checkverf(9)Validate verifier in RPC Reply header✨
rpcauth_get_gssinfo(9)find GSS tuple matching a GSS pseudoflavor✨
rpcauth_get_pseudoflavor(9)check if security flavor is supported✨
rpcauth_marshcred(9)Append RPC credential to end of @xdr✨
rpcauth_unwrap_resp(9)Invoke unwrap and decode function for the cred✨
rpcauth_unwrap_resp_decode(9)Invoke XDR decode function✨
rpcauth_wrap_req(9)XDR encode and wrap the RPC procedure✨
rpcauth_wrap_req_encode(9)XDR encode the RPC procedure✨
rpcb_getport_async(9)obtain the port for a given RPC service on a given host✨
rpcb_register(9)set or unset a port registration with the local rpcbind svc✨
rpcb_v4_register(9)set or unset a port registration with the local rpcbind✨
rpcrdma_add_one(9)ib_client device insertion callback✨
rpcrdma_bc_receive_call(9)Handle a reverse-direction Call✨
rpcrdma_buffer_create(9)Create initial set of req/rep objects✨
rpcrdma_buffer_destroy(9)Release all hw resources✨
rpcrdma_buffer_get(9)Get a request buffer✨
rpcrdma_buffer_put(9)Put request/reply buffers back into pool✨
rpcrdma_cm_event_handler(9)Handle RDMA CM events✨
rpcrdma_complete_rqst(9)Pass completed rqst back to RPC✨
rpcrdma_flush_disconnect(9)Disconnect on flushed completion✨
rpcrdma_ib_client_register(9)register ib_client for rpcrdma✨
rpcrdma_ib_client_unregister(9)unregister ib_client for xprtrdma✨
rpcrdma_inline_fixup(9)Scatter inline received data into rqst's iovecs✨
rpcrdma_marshal_req(9)Marshal and send one RPC request✨
rpcrdma_mr_get(9)Allocate an rpcrdma_mr object✨
rpcrdma_mrs_destroy(9)Release all of a transport's MRs✨
rpcrdma_mrs_refresh(9)Wake the MR refresh worker✨
rpcrdma_post_recvs(9)Refill the Receive Queue✨
rpcrdma_prepare_send_sges(9)Construct SGEs for a Send WR✨
rpcrdma_regbuf_dma_map(9)DMA-map a regbuf✨
rpcrdma_regbuf_is_mapped(9)check if buffer is DMA mapped✨
rpcrdma_regbuf_realloc(9)re-allocate a SEND/RECV buffer✨
rpcrdma_remove_one(9)ib_client device removal callback✨
rpcrdma_rep_put(9)Release rpcrdma_rep back to free list✨
rpcrdma_reply_handler(9)Process received RPC/RDMA messages✨
rpcrdma_reply_put(9)Put reply buffers back into pool✨
rpcrdma_req_create(9)Allocate an rpcrdma_req object✨
rpcrdma_req_destroy(9)Destroy an rpcrdma_req object✨
rpcrdma_req_setup(9)Per-connection instance setup of an rpcrdma_req object✨
rpcrdma_reset_cwnd(9)Reset the xprt's congestion window✨
rpcrdma_rn_register(9)register to get device removal notifications✨
rpcrdma_rn_unregister(9)stop device removal notifications✨
rpcrdma_sendctx_get_locked(9)Acquire a send context✨
rpcrdma_sendctx_put_locked(9)Release a send context✨
rpcrdma_sendctx_unget_locked(9)Release an unposted send context✨
rpcrdma_sendctx_unmap(9)DMA-unmap Send buffer and release Send owner✨
rpcrdma_set_max_header_sizes(9)Initialize inline payload sizes✨
rpcrdma_unpin_rqst(9)Release rqst without completing it✨
rpcrdma_wc_receive(9)Invoked by RDMA provider for each polled Receive WC✨
rpcrdma_wc_send(9)Invoked by RDMA provider for each polled Send WC✨
rpcrdma_xprt_connect(9)Connect an unconnected transport✨
rpcrdma_xprt_disconnect(9)Disconnect underlying transport✨
rpi_firmware_get(9)Get pointer to rpi_firmware structure.✨
rpi_firmware_property(9)Submit single firmware property✨
rpi_firmware_property_list(9)Submit firmware property list✨
rpm_callback(9)Run a given runtime PM callback for a given device.✨
rpm_check_suspend_allowed(9)Test whether a device may be suspended.✨
rpm_idle(9)Notify device bus type if the device can be suspended.✨
rpm_regulator_init_vreg(9)initialize all attributes of a qcom_smd- regulator✨
rpm_resume(9)Carry out runtime resume of given device.✨
rpm_suspend(9)Carry out runtime suspend of given device.✨
rpmb_dev_find_device(9)return first matching rpmb device✨
rpmb_dev_get(9)increase rpmb device ref counter✨
rpmb_dev_put(9)decrease rpmb device ref counter✨
rpmb_dev_register(9)register RPMB partition with the RPMB subsystem✨
rpmb_dev_unregister(9)unregister RPMB partition from the RPMB subsystem✨
rpmb_route_frames(9)route rpmb frames to rpmb device✨
rpmh_flush(9)Flushes the buffered sleep and wake sets to TCSes✨
rpmh_invalidate(9)Invalidate sleep and wake sets in batch_cache✨
rpmh_read(9)Read a resource value✨
rpmh_regulator_init_vreg(9)initialize all attributes of an rpmh- regulator✨
rpmh_regulator_send_request(9)send the request to RPMh✨
rpmh_regulator_vrm_get_optimum_mode(9)get the mode based on the load✨
rpmh_rsc_cpu_pm_callback(9)Check if any of the AMCs are busy.✨
rpmh_rsc_ctrlr_is_busy(9)Check if any of the AMCs are busy.✨
rpmh_rsc_invalidate(9)Invalidate sleep and wake TCSes.✨
rpmh_rsc_pd_callback(9)Check if any of the AMCs are busy.✨
rpmh_rsc_send_data(9)Write / trigger active-only message.✨
rpmh_rsc_write_ctrl_data(9)Write request to controller but don't trigger.✨
rpmh_rsc_write_next_wakeup(9)Write next wakeup in CONTROL_TCS.✨
rpmh_write(9)Write a set of RPMH commands and block until response✨
rpmh_write_async(9)Write a set of RPMH commands✨
rpmh_write_batch(9)Write multiple sets of RPMH commands and wait for the batch to finish.✨
rpmsg_chrdev_eptdev_create(9)register char device based on an endpoint✨
rpmsg_chrdev_eptdev_destroy(9)destroy created char device endpoint.✨
rpmsg_create_channel(9)create a new rpmsg channel using its name and address info.✨
rpmsg_create_ept(9)create a new rpmsg_endpoint✨
rpmsg_ctrldev_register_device(9)register a char device for control based on rpdev✨
rpmsg_destroy_ept(9)destroy an existing rpmsg endpoint✨
rpmsg_get_mtu(9)get maximum transmission buffer size for sending message.✨
rpmsg_ns_register_device(9)register name service device based on rpdev✨
rpmsg_poll(9)poll the endpoint's send buffers✨
rpmsg_release_channel(9)release a rpmsg channel using its name and address info.✨
rpmsg_send(9)send a message across to the remote processor✨
rpmsg_send_offchannel_raw(9)send a message across to the remote processor✨
rpmsg_sendto(9)send a message across to the remote processor, specify dst✨
rpmsg_set_flow_control(9)request remote to pause/resume transmission✨
rpmsg_sg_init(9)initialize scatterlist according to cpu address location✨
rpmsg_trysend(9)send a message across to the remote processor✨
rpmsg_trysendto(9)send a message across to the remote processor, specify dst✨
rport_dev_loss_timedout(9)device loss timeout handler✨
rport_fast_io_fail_timedout(9)fast I/O failure timeout handler✨
RPPX1_PARAMS_MAX_SIZE(9)Maximum size of all RPP-X1 parameter blocks✨
RPPX1_STATS_MAX_SIZE(9)Maximum size of all RPP-X1 statistics✨
rpr0521_set_power_state(9)handles runtime PM state and sensors enabled status✨
rproc_add(9)register a remote processor✨
rproc_add_carveout(9)register an allocated carveout region✨
rproc_add_subdev(9)add a subdevice to a remoteproc✨
rproc_add_virtio_dev(9)register an rproc-induced virtio device✨
rproc_alloc(9)allocate a remote processor handle✨
rproc_alloc_carveout(9)allocated specified carveout✨
rproc_alloc_registered_carveouts(9)allocate all carveouts registered in the list✨
rproc_boot(9)boot a remote processor✨
rproc_check_carveout_da(9)Check specified carveout da configuration✨
rproc_coredump(9)perform coredump✨
rproc_coredump_add_custom_segment(9)add custom coredump segment✨
rproc_coredump_add_segment(9)add segment of device memory to coredump✨
rproc_coredump_cleanup(9)clean up dump_segments list✨
rproc_coredump_set_elf_info(9)set coredump elf information✨
rproc_coredump_using_sections(9)perform coredump using section headers✨
rproc_crash_handler_work(9)handle a crash✨
rproc_da_to_va(9)lookup the kernel virtual address for a remoteproc address✨
rproc_del(9)unregister a remote processor✨
rproc_detach(9)Detach the remote processor from the remoteproc core✨
rproc_elf_find_loaded_rsc_table(9)find the loaded resource table✨
rproc_elf_get_boot_addr(9)Get rproc's boot address.✨
rproc_elf_load_rsc_table(9)load the resource table✨
rproc_elf_load_segments(9)load firmware segments to memory✨
rproc_elf_sanity_check(9)Sanity Check for ELF32/ELF64 firmware image✨
rproc_find_carveout_by_name(9)lookup the carveout region by a name✨
rproc_free(9)unroll rproc_alloc()✨
rproc_get_by_child(9)acquire rproc handle of @dev's ancestor✨
rproc_get_by_phandle(9)find a remote processor by phandle✨
rproc_handle_carveout(9)handle phys contig memory allocation requests✨
rproc_handle_devmem(9)handle devmem resource entry✨
rproc_handle_trace(9)handle a shared trace buffer resource✨
rproc_handle_vdev(9)handle a vdev fw resource✨
rproc_mem_entry_init(9)allocate and initialize rproc_mem_entry struct✨
rproc_of_parse_firmware(9)parse and return the firmware-name✨
rproc_of_resm_mem_entry_init(9)allocate and initialize rproc_mem_entry struct from a reserved memory phandle✨
rproc_put(9)release rproc reference✨
rproc_release_carveout(9)release acquired carveout✨
rproc_remove_subdev(9)remove a subdevice from a remoteproc✨
rproc_remove_virtio_dev(9)remove an rproc-induced virtio device✨
rproc_report_crash(9)rproc crash reporter function✨
rproc_resource_cleanup(9)clean up and free all acquired resources✨
rproc_set_firmware(9)assign a new firmware✨
rproc_shutdown(9)power off the remote processor✨
rproc_trigger_recovery(9)recover a remoteproc✨
rproc_type_release(9)release a remote processor instance✨
rproc_vq_interrupt(9)tell remoteproc that a virtqueue is interrupted✨
rps_flow_is_active(9)check whether the flow is recently active.✨
rps_may_expire_flow(9)check whether an RFS hardware filter may be removed✨
rq_is_open(9)Is the rq available for immediate execution of an SCX task?✨
rq_qos_wait(9)throttle on a rqw if we need to✨
rqst_exp_find(9)Find an svc_export in the context of a rqst or similar✨
rs_cmp(9)multi-block reservation range compare✨
rs_insert(9)insert a new multi-block reservation into the rgrp's rb_tree✨
rsa_parse_priv_key(9)decodes the BER encoded buffer and stores in the provided struct rsa_key, pointers to the raw key as is, so that the caller can copy it or MPI parse it, etc.✨
rsa_parse_pub_key(9)decodes the BER encoded buffer and stores in the provided struct rsa_key, pointers to the raw key as is, so that the caller can copy it or MPI parse it, etc.✨
rsc_table_for_each_entry(9)iterate over all entries in a resource table✨
rsctrl_enable_rspll_write(9)enable access to RSCTRL, RSCFG To be able to access to RSCTRL, RSCFG registers we have to write a key before✨
rsi_91x_deinit(9)This function de-intializes os intf operations.✨
rsi_91x_init(9)This function initializes os interface operations.✨
rsi_attestation_token_continue(9)Continue the operation to retrieve an attestation token.✨
rsi_attestation_token_init(9)Initialise the operation to retrieve an attestation token.✨
rsi_band_check(9)This function programs the band✨
rsi_channel_change(9)This function is a performs the checks required for changing a channel and sets the channel accordingly.✨
rsi_cmd52readbyte(9)This function issues cmd52 byte read onto the card.✨
rsi_cmd52writebyte(9)This function issues cmd52 byte write onto the card.✨
rsi_compare(9)This function is used to compare two integers✨
rsi_config_power(9)This function configures tx power to device✨
rsi_core_dequeue_pkt(9)This functions dequeues the packet from the queue specified by the queue number.✨