📦 linux-manual

H (continued)

• hns_mac_set_autoneg(9)set auto autonegotiation✨
• hns_mac_set_pauseparam(9)set rx & tx pause parameter✨
• hns_mac_vm_config_bc_en(9)set broadcast rx&tx enable✨
• hns_mdio_probe(9)probe mdio device✨
• hns_mdio_read_c22(9)access phy register✨
• hns_mdio_read_c45(9)access phy register✨
• hns_mdio_remove(9)remove mdio device✨
• hns_mdio_reset(9)reset mdio bus✨
• hns_mdio_write_c22(9)access phy register✨
• hns_mdio_write_c45(9)access phy register✨
• hns_nic_adjust_link(9)adjust net work mode by the phy stat or new param✨
• hns_nic_adpt_coalesce(9)self adapte coalesce according to rx rate✨
• hns_nic_clear_all_rx_fetch(9)clear the chip fetched descriptions. The function as follows: 1. if one rx ring has found the page_offset is not equal 0 between head and tail, it means that the chip fetched the wrong descs for…✨
• hns_nic_get_drvinfo(9)get net driver info✨
• hns_nic_get_link(9)get current link status✨
• hns_nic_get_link_ksettings(9)implement ethtool get link ksettings✨
• hns_nic_init_phy(9)init phy✨
• hns_nic_nway_reset(9)nway reset✨
• hns_nic_self_test(9)self test✨
• hns_nic_set_link_ksettings(9)implement ethtool set link ksettings✨
• hns_phy_led_set(9)set phy LED status.✨
• hns_ppe_checksum_hw(9)set ppe checksum caculate✨
• hns_ppe_common_get_cfg(9)get ppe common config✨
• hns_ppe_common_init_hw(9)init ppe common device✨
• hns_ppe_get_strings(9)get ppe srting✨
• hns_ppe_init(9)init ppe device✨
• hns_ppe_init_hw(9)init ppe✨
• hns_ppe_reset_common(9)reinit ppe/rcb hw✨
• hns_ppe_set_port_mode(9)set port mode✨
• hns_ppe_set_qid(9)set ppe qid✨
• hns_ppe_uninit_hw(9)uninit ppe✨
• hns_rcb_common_init_commit_hw(9)make rcb common init completed✨
• hns_rcb_common_init_hw(9)init rcb common hardware✨
• hns_rcb_get_cfg(9)get rcb config✨
• hns_rcb_get_coalesce_usecs(9)get rcb port coalesced time_out✨
• hns_rcb_get_common_regs_count(9)rcb common regs count return regs count✨
• hns_rcb_get_queue_mode(9)get max VM number and max ring number per VM accordding to dsaf mode✨
• hns_rcb_get_ring_regs_count(9)rcb ring regs count return regs count✨
• hns_rcb_get_ring_sset_count(9)rcb string set count✨
• hns_rcb_get_rx_coalesced_frames(9)get rcb port rx coalesced frames✨
• hns_rcb_get_stats(9)get rcb statistic✨
• hns_rcb_get_strings(9)get rcb string set✨
• hns_rcb_get_tx_coalesced_frames(9)get rcb port tx coalesced frames✨
• hns_rcb_init_hw(9)init rcb hardware✨
• hns_rcb_int_ctrl_hw(9)rcb irq enable control✨
• hns_rcb_reset_ring_hw(9)ring reset✨
• hns_rcb_ring_enable_hw(9)enable ring✨
• hns_rcb_ring_init(9)init rcb ring✨
• hns_rcb_set_coalesce_usecs(9)set rcb port coalesced time_out✨
• hns_rcb_set_port_desc_cnt(9)set rcb port description num✨
• hns_rcb_set_rx_coalesced_frames(9)set rcb rx coalesced frames✨
• hns_rcb_set_tx_coalesced_frames(9)set rcb coalesced frames✨
• hns_rcb_wait_fbd_clean(9)clean fbd✨
• hns_roce_mtr_create(9)Create hns memory translate region.✨
• hns_roce_setup_hca(9)setup host channel adapter✨
• hns_set_coalesce(9)set coalesce info.✨
• hns_set_multicast_list(9)set mutl mac address✨
• hns_set_pauseparam(9)set pause parameter✨
• hns_set_phys_id(9)set phy identify LED.✨
• hns_tx_timeout_reset(9)initiate reset due to Tx timeout✨
• hns_xgmac_config_max_frame_length(9)set xgmac max frame length✨
• hns_xgmac_config_pad_and_crc(9)set xgmac pad and crc enable the same time✨
• hns_xgmac_disable(9)disable xgmac port✨
• hns_xgmac_enable(9)enable xgmac port✨
• hns_xgmac_free(9)free xgmac driver✨
• hns_xgmac_get_info(9)get xgmac information✨
• hns_xgmac_get_link_status(9)get xgmac link status✨
• hns_xgmac_get_pausefrm_cfg(9)get xgmac pause param✨
• hns_xgmac_get_regs(9)dump xgmac regs✨
• hns_xgmac_get_regs_count(9)get xgmac regs count return xgmac regs count✨
• hns_xgmac_get_sset_count(9)get xgmac string set count✨
• hns_xgmac_get_stats(9)get xgmac statistic✨
• hns_xgmac_get_strings(9)get xgmac strings name✨
• hns_xgmac_init(9)initialize XGE✨
• hns_xgmac_lf_rf_control_init(9)initial the lf rf control register✨
• hns_xgmac_lf_rf_insert(9)insert lf rf control about xgmac✨
• hns_xgmac_pausefrm_cfg(9)set pause param about xgmac✨
• hns_xgmac_pma_fec_enable(9)xgmac PMA FEC enable✨
• hns_xgmac_rx_enable(9)xgmac port rx enable✨
• hns_xgmac_set_tx_auto_pause_frames(9)set tx pause param about xgmac✨
• hns_xgmac_tx_enable(9)xgmac port tx enable✨
• hook_ptrace_access_check(9)Determines whether the current process may access another✨
• hook_ptrace_traceme(9)Determines whether another process may trace the current one✨
• horus3a_attach(9)Attach a horus3a tuner✨
• Host and driver state messages(9)✨
• Host command section(9)✨
• host1x_bo_clear_cached_mappings(9)Remove all cached mappings pointing at a bo✨
• host1x_bo_pin(9)Create a DMA mapping for the buffer object✨
• host1x_bo_unpin(9)Release an established DMA mapping of a buffer object✨
• host1x_channel_get_index(9)Attempt to get channel reference by index✨
• host1x_channel_request(9)Allocate a channel✨
• host1x_channel_stop_all(9)disable CDMA on allocated channels✨
• host1x_client_exit(9)uninitialize a host1x client✨
• host1x_client_unregister(9)unregister a host1x client✨
• host1x_device_exit(9)uninitialize host1x logical device✨
• host1x_device_init(9)initialize a host1x logical device✨
• host1x_device_parse_dt(9)scan device tree and add matching subdevices✨
• host1x_driver_register_full(9)register a host1x driver✨
• host1x_driver_unregister(9)unregister a host1x driver✨
• host1x_get_dma_mask(9)query the supported DMA mask for host1x✨
• host1x_register(9)register a host1x controller✨
• host1x_subdev_add(9)add a new subdevice with an associated device node✨
• host1x_subdev_del(9)remove subdevice✨
• host1x_syncpt_alloc(9)allocate a syncpoint✨
• host1x_syncpt_base_id(9)retrieve the ID of a syncpoint wait base✨
• host1x_syncpt_get(9)increment syncpoint refcount✨
• host1x_syncpt_get_base(9)obtain the wait base associated with a syncpoint✨
• host1x_syncpt_get_by_id(9)obtain a syncpoint by ID✨
• host1x_syncpt_get_by_id_noref(9)obtain a syncpoint by ID but don't increase the refcount.✨
• host1x_syncpt_id(9)retrieve syncpoint ID✨
• host1x_syncpt_incr(9)increment syncpoint value from CPU, updating cache✨
• host1x_syncpt_incr_max(9)update the value sent to hardware✨
• host1x_syncpt_put(9)free a requested syncpoint✨
• host1x_syncpt_read(9)read the current syncpoint value✨
• host1x_syncpt_read_max(9)read maximum syncpoint value✨
• host1x_syncpt_read_min(9)read minimum syncpoint value✨
• host1x_syncpt_release_vblank_reservation(9)Make VBLANK syncpoint available for allocation✨
• host1x_syncpt_request(9)request a syncpoint✨
• host1x_syncpt_wait(9)wait for a syncpoint to reach a given value✨
• host1x_unregister(9)unregister a host1x controller✨
• HOST2GUC_CONTROL_CTB(9)✨
• HOST2GUC_SELF_CFG(9)✨
• host_control_smi(9)generate host control SMI✨
• host_sas_address_show(9)sas address✨
• host_trace_buffer_enable_show(9)firmware ring buffer (trace only)✨
• host_trace_buffer_show(9)firmware ring buffer (trace only)✨
• host_trace_buffer_size_show(9)host buffer size (trace only)✨
• hot_remove_dock_devices(9)Remove dock station devices.✨
• Hotplug(9)✨
• hotplug_dock_devices(9)Insert devices on a dock station.✨
• hotspot properties(9)✨
• hp_add_other_attributes(9)Initialize HP custom attributes not reported by BIOS and required to support Secure Platform and Sure Start.✨
• hp_alloc_attributes_data(9)Allocate attributes data for a particular type✨
• hp_ascii_to_utf16_unicode(9)Convert ascii string to UTF-16 unicode✨
• hp_calculate_security_buffer(9)determines size of security buffer for authentication scheme✨
• hp_calculate_string_buffer(9)determines size of string buffer for use with BIOS communication✨
• hp_exit_enumeration_attributes(9)Clear all attribute data✨
• hp_exit_integer_attributes(9)Clear all attribute data✨
• hp_exit_ordered_list_attributes(9)Clear all attribute data✨
• hp_exit_password_attributes(9)Clear all attribute data✨
• hp_exit_string_attributes(9)Clear all attribute data✨
• hp_get_instance_count(9)Compute total number of instances under guid_string✨
• hp_get_wmiobj_pointer(9)Get Content of WMI block for particular instance✨
• hp_init_bios_attributes(9)Initialize all attributes for a type✨
• hp_populate_enumeration_buffer_data(9)Populate all properties of an instance under enumeration attribute✨
• hp_populate_enumeration_package_data(9)Populate all properties of an instance under enumeration attribute✨
• hp_populate_integer_buffer_data(9)Populate all properties of an instance under integer attribute✨
• hp_populate_integer_package_data(9)Populate all properties of an instance under integer attribute✨
• hp_populate_ordered_list_buffer_data(9)Populate all properties of an instance under ordered list attribute✨
• hp_populate_ordered_list_package_data(9)Populate all properties of an instance under ordered_list attribute✨
• hp_populate_password_buffer_data(9)✨
• hp_populate_password_package_data(9)✨
• hp_populate_security_buffer(9)builds a security buffer for authentication scheme✨
• hp_populate_string_buffer_data(9)Populate all properties of an instance under string attribute✨
• hp_populate_string_package_data(9)Populate all properties of an instance under string attribute✨
• hp_set_attribute(9)✨
• hp_update_attribute_permissions(9)Update attributes permissions when isReadOnly value is 1✨
• hp_wmi_perform_query(9)✨
• hp_wmi_set_bios_setting(9)Set setting's value in BIOS✨
• hpet_enable(9)Try to setup the HPET timer. Returns 1 on success.✨
• hpi_find_adapter(9)FindAdapter returns a pointer to the struct hpi_adapter_obj with index wAdapterIndex in an HPI_ADAPTERS_LIST structure.✨
• hpi_validate_response(9)Given an HPI Message that was sent out and a response that was received, validate that the response has the correct fields filled in, i.e ObjectType, Function etc✨
• hppb_init(9)HP-PB bus initialization procedure.✨
• hppb_probe(9)Determine if the hppb driver should claim this device.✨
• hpt366_filter(9)mode selection filter✨
• hpt366_prereset(9)reset the hpt36x bus✨
• hpt366_set_dmamode(9)DMA timing setup✨
• hpt366_set_piomode(9)PIO setup✨
• hpt36x_find_mode(9)find the hpt36x timing✨
• hpt36x_init_chipset(9)common chip setup✨
• hpt36x_init_one(9)Initialise an HPT366/368✨
• hpt370_bmdma_stop(9)DMA engine stop✨
• hpt370_filter(9)mode selection filter✨
• hpt370a_filter(9)mode selection filter✨
• hpt372_filter(9)mode selection filter✨
• hpt372n_filter(9)mode selection filter✨
• hpt374_fn1_cable_detect(9)Detect the cable type✨
• hpt37x_bmdma_stop(9)DMA engine stop✨
• hpt37x_cable_detect(9)Detect the cable type✨
• hpt37x_calibrate_dpll(9)Calibrate the DPLL loop✨
• hpt37x_clock_slot(9)Turn timing to PC clock entry✨
• hpt37x_find_mode(9)reset the hpt37x bus✨
• hpt37x_init_one(9)Initialise an HPT37X/302✨
• hpt37x_pre_reset(9)reset the hpt37x bus✨
• hpt37x_set_dmamode(9)DMA timing setup✨
• hpt37x_set_piomode(9)PIO setup✨
• hpt3x2n_bmdma_stop(9)DMA engine stop✨
• hpt3x2n_cable_detect(9)Detect the cable type✨
• hpt3x2n_find_mode(9)reset the hpt3x2n bus✨
• hpt3x2n_init_one(9)Initialise an HPT37X/302✨
• hpt3x2n_pre_reset(9)reset the hpt3x2n bus✨
• hpt3x2n_set_clock(9)clock control✨
• hpt3x2n_set_dmamode(9)DMA timing setup✨
• hpt3x2n_set_piomode(9)PIO setup✨
• hpt3x3_atapi_dma(9)ATAPI DMA check✨
• hpt3x3_bmdma_setup(9)DMA workaround✨
• hpt3x3_freeze(9)DMA workaround✨
• hpt3x3_init_chipset(9)chip setup✨
• hpt3x3_init_one(9)Initialise an HPT343/363✨
• hpt3x3_set_dmamode(9)DMA timing setup✨