📦 linux-manual

82568 pages · page 112 of 413

F (continued)

fm10k_mbx_disconnect(9)Shutdown mailbox connection✨
fm10k_mbx_enqueue_tx(9)Enqueues the message to the tail of the Tx FIFO✨
fm10k_mbx_head_add(9)Determine new head value with added offset✨
fm10k_mbx_head_sub(9)Determine new head value with subtracted offset✨
fm10k_mbx_index_len(9)Convert a head/tail index into a length value✨
fm10k_mbx_process(9)Process mailbox interrupt✨
fm10k_mbx_process_connect(9)Process connect header✨
fm10k_mbx_process_data(9)Process data header✨
fm10k_mbx_process_disconnect(9)Process disconnect header✨
fm10k_mbx_process_error(9)Process error header✨
fm10k_mbx_pull_head(9)Pulls data off of head of Tx FIFO✨
fm10k_mbx_push_tail(9)Pushes up to 15 DWORDs on to tail of FIFO✨
fm10k_mbx_pushed_tail_len(9)Retrieve the length of message being pushed✨
fm10k_mbx_read(9)Copies the mbmem to local message buffer✨
fm10k_mbx_read_copy(9)pulls data off of mbmem and places it in Rx FIFO✨
fm10k_mbx_register_handlers(9)Register a set of handler ops for mailbox✨
fm10k_mbx_reset_work(9)Reset internal pointers for any pending work✨
fm10k_mbx_rx_ready(9)Indicates that a message is ready in the Rx FIFO✨
fm10k_mbx_subtask(9)Process upstream and downstream mailboxes✨
fm10k_mbx_tail_add(9)Determine new tail value with added offset✨
fm10k_mbx_tail_sub(9)Determine new tail value with subtracted offset✨
fm10k_mbx_tx_complete(9)Indicates that the Tx FIFO has been emptied✨
fm10k_mbx_tx_ready(9)Indicates that the mailbox is in state ready for Tx✨
fm10k_mbx_update_local_crc(9)Update the local CRC for outgoing data✨
fm10k_mbx_update_max_size(9)Update the max_size and drop any large messages✨
fm10k_mbx_validate_handlers(9)Validate layout of message parsing data✨
fm10k_mbx_validate_msg_hdr(9)Validate common fields in the message header✨
fm10k_mbx_validate_msg_size(9)Validate incoming message based on size✨
fm10k_mbx_verify_remote_crc(9)Verify the CRC is correct for current data✨
fm10k_mbx_write(9)Copies the local message buffer to mbmem✨
fm10k_mbx_write_copy(9)pulls data off of Tx FIFO and places it in mbmem✨
fm10k_msg_err_pf(9)Message handler for error reply✨
fm10k_msg_lport_map_pf(9)Message handler for lport_map message from SM✨
fm10k_msg_lport_state_vf(9)Message handler for lport_state message from PF✨
fm10k_msg_mac_vlan_vf(9)Read device MAC address from mailbox message✨
fm10k_msg_update_pvid_pf(9)Message handler for port VLAN message from SM✨
fm10k_open(9)Called when a network interface is made active✨
fm10k_pfvf_mbx_init(9)Initialize mailbox memory for PF/VF mailbox✨
fm10k_prepare_for_reset(9)Prepare the driver and device for a pending reset✨
fm10k_probe(9)Device Initialization Routine✨
fm10k_process_skb_fields(9)Populate skb header fields from Rx descriptor✨
fm10k_queue_mac_request(9)Queue a MAC update request✨
fm10k_queue_vlan_request(9)Queue a VLAN update request✨
fm10k_qv_free_irq(9)release interrupts associated with queue vectors✨
fm10k_qv_request_irq(9)initialize interrupts for queue vectors✨
fm10k_read_hw_stats_32b(9)Reads value of 32-bit registers✨
fm10k_read_hw_stats_48b(9)Reads value of 48-bit registers✨
fm10k_read_mac_addr_pf(9)Read device MAC address✨
fm10k_read_mac_addr_vf(9)Read device MAC address✨
fm10k_rebind_hw_stats_pf(9)Resets base for hardware statistics of PF✨
fm10k_rebind_hw_stats_vf(9)Resets base for hardware statistics of VF✨
fm10k_receive_skb(9)helper function to handle rx indications✨
fm10k_record_global_table_data(9)Move global table data to swapi table info✨
fm10k_register_pci_driver(9)register driver interface✨
fm10k_remove(9)Device Removal Routine✨
fm10k_request_glort_range(9)Request GLORTs for use in configuring rules✨
fm10k_request_lport_map_pf(9)Request LPORT map from the switch API✨
fm10k_reset_hw_pf(9)PF hardware reset✨
fm10k_reset_hw_vf(9)VF hardware reset✨
fm10k_reset_msix_capability(9)reset MSI-X capability✨
fm10k_reset_num_queues(9)Reset the number of queues to zero✨
fm10k_restore_udp_port_info(9)✨
fm10k_resume(9)Generic PM resume hook✨
fm10k_resume_macvlan_task(9)Restart the MAC/VLAN queue monitor✨
fm10k_reuse_rx_page(9)page flip buffer and store it back on the ring✨
fm10k_service_task(9)manages and runs subtasks✨
fm10k_service_timer(9)Timer Call-back✨
fm10k_set_dma_mask_pf(9)Configures PhyAddrSpace to limit DMA to system✨
fm10k_set_num_queues(9)Allocate queues for device, feature dependent✨
fm10k_set_qos_queues(9)Allocate queues for a QOS-enabled device✨
fm10k_set_rss_queues(9)Allocate queues for RSS✨
fm10k_setup_all_rx_resources(9)allocate all queues Rx resources✨
fm10k_setup_all_tx_resources(9)allocate all queues Tx resources✨
fm10k_setup_rx_resources(9)allocate Rx resources (Descriptors)✨
fm10k_setup_tx_resources(9)allocate Tx resources (Descriptors)✨
fm10k_sm_mbx_connect(9)Start switch manager mailbox connection✨
fm10k_sm_mbx_connect_reset(9)Reset following request for reset✨
fm10k_sm_mbx_create_connect_hdr(9)Generate a mailbox header for local FIFO✨
fm10k_sm_mbx_create_data_hdr(9)Generate a mailbox header for local FIFO✨
fm10k_sm_mbx_create_error_msg(9)Process an error in FIFO header✨
fm10k_sm_mbx_create_reply(9)Generate reply based on state and remote head✨
fm10k_sm_mbx_disconnect(9)Shutdown mailbox connection✨
fm10k_sm_mbx_init(9)Initialize mailbox memory for PF/SM mailbox✨
fm10k_sm_mbx_process(9)Process switch manager mailbox interrupt✨
fm10k_sm_mbx_process_error(9)Process header with error flag set✨
fm10k_sm_mbx_process_reset(9)Process header with version == 0 (RESET)✨
fm10k_sm_mbx_process_version_1(9)Process header with version == 1✨
fm10k_sm_mbx_receive(9)Take message from Rx mailbox FIFO and put it in Rx✨
fm10k_sm_mbx_transmit(9)Take message from Tx and put it in Tx mailbox FIFO✨
fm10k_sm_mbx_validate_fifo_hdr(9)Validate fields in the remote FIFO header✨
fm10k_start_hw_generic(9)Prepare hardware for Tx/Rx✨
fm10k_stop_hw_generic(9)Stop Tx/Rx units✨
fm10k_stop_hw_vf(9)Stop Tx/Rx units✨
fm10k_stop_macvlan_task(9)Stop the MAC/VLAN queue monitor✨
fm10k_suspend(9)Generic PM suspend hook✨
fm10k_sw_init(9)Initialize general software structures✨
fm10k_tlv_attr_get_le_struct(9)Get little endian struct form attribute✨
fm10k_tlv_attr_get_mac_vlan(9)Get MAC/VLAN stored in attribute✨
fm10k_tlv_attr_get_null_string(9)Get null terminated string from attribute✨
fm10k_tlv_attr_get_value(9)Get integer value stored in attribute✨
fm10k_tlv_attr_nest_start(9)Start a set of nested attributes✨
fm10k_tlv_attr_nest_stop(9)Stop a set of nested attributes✨
fm10k_tlv_attr_parse(9)Parses stream of attribute data✨
fm10k_tlv_attr_put_bool(9)Add header indicating value "true"✨
fm10k_tlv_attr_put_le_struct(9)Store little endian structure in message✨
fm10k_tlv_attr_put_mac_vlan(9)Store MAC/VLAN attribute in message✨
fm10k_tlv_attr_put_null_string(9)Place null terminated string on message✨
fm10k_tlv_attr_put_value(9)Store integer value attribute in message✨
fm10k_tlv_attr_validate(9)Validate attribute metadata✨
fm10k_tlv_msg_error(9)Default handler for unrecognized TLV message IDs✨
fm10k_tlv_msg_init(9)Initialize message block for TLV data storage✨
fm10k_tlv_msg_parse(9)Parses message header and calls function handler✨
fm10k_tlv_msg_test(9)Validate all results on test message receive✨
fm10k_tlv_msg_test_create(9)Create a test message testing all attributes✨
fm10k_tlv_msg_test_generate_data(9)Stuff message with data✨
fm10k_tx_timeout(9)Respond to a Tx Hang✨
fm10k_tx_timeout_reset(9)initiate reset due to Tx timeout✨
fm10k_udp_tunnel_sync(9)Called when UDP tunnel ports change✨
fm10k_unbind_hw_stats_q(9)Unbind the queue counters from their queues✨
fm10k_unregister_pci_driver(9)unregister driver interface✨
fm10k_update_hw_base_48b(9)Updates 48-bit statistic base value✨
fm10k_update_hw_stats_pf(9)Updates hardware related statistics of PF✨
fm10k_update_hw_stats_q(9)Updates queue statistics counters✨
fm10k_update_hw_stats_rx_q(9)Updates RX queue statistics counters✨
fm10k_update_hw_stats_tx_q(9)Updates TX queue statistics counters✨
fm10k_update_hw_stats_vf(9)Updates hardware related statistics of VF✨
fm10k_update_int_moderator_pf(9)Update interrupt moderator linked list✨
fm10k_update_int_moderator_vf(9)Request update of interrupt moderator list✨
fm10k_update_itr(9)update the dynamic ITR value based on packet size✨
fm10k_update_lport_state_pf(9)Notify the switch of a change in port state✨
fm10k_update_lport_state_vf(9)Update device state in lower device✨
fm10k_update_mc_addr_pf(9)Update device multicast addresses✨
fm10k_update_mc_addr_vf(9)Update device multicast addresses✨
fm10k_update_rx_drop_en(9)Configures the drop enable bits for Rx rings✨
fm10k_update_stats(9)Update the board statistics counters.✨
fm10k_update_uc_addr_pf(9)Update device unicast addresses✨
fm10k_update_uc_addr_vf(9)Update device unicast addresses✨
fm10k_update_vlan_pf(9)Update status of VLAN ID in VLAN filter table✨
fm10k_update_vlan_vf(9)Update status of VLAN ID in VLAN filter table✨
fm10k_update_xc_addr_pf(9)Update device addresses✨
fm10k_update_xcast_mode_pf(9)Request update of multicast mode✨
fm10k_update_xcast_mode_vf(9)Request update of multicast mode✨
fm10k_watchdog_flush_tx(9)flush queues on host not ready✨
fm10k_watchdog_host_is_ready(9)Update netdev status based on host ready✨
fm10k_watchdog_host_not_ready(9)Update netdev status based on host not ready✨
fm10k_watchdog_subtask(9)check and bring link up✨
fm10k_watchdog_update_host_state(9)Update the link status based on host.✨
fman_bind(9)✨
fman_get_bmi_max_fifo_size(9)✨
fman_get_clock_freq(9)✨
fman_get_max_frm(9)✨
fman_get_mem_region(9)✨
fman_get_qman_channel_id(9)✨
fman_get_revision(9)✨
fman_get_rx_extra_headroom(9)✨
fman_muram_alloc(9)✨
fman_muram_free_mem(9)✨
fman_muram_init(9)✨
fman_muram_offset_to_vbase(9)✨
fman_port_bind(9)✨
fman_port_cfg_buf_prefix_content(9)✨
fman_port_config(9)✨
fman_port_disable(9)✨
fman_port_enable(9)✨
fman_port_get_device(9)✨
fman_port_get_qman_channel_id(9)✨
fman_port_init(9)✨
fman_register_intr(9)✨
fman_reset_mac(9)✨
fman_set_mac_max_frame(9)✨
fman_set_port_params(9)✨
fman_unregister_intr(9)✨
fname_decrypt(9)decrypt a filename✨
fnic_common_fip_cleanup(9)Clean up FCF info and timers in case of link down/CVL✨
fnic_fcoe_fip_discovery_resp(9)Processes FCF advertisements.✨
fnic_fcoe_process_cvl(9)Processes Clear Virtual Link from FCF.✨
fnic_fcoe_process_flogi_resp(9)Processes FLOGI response from FCF.✨
fnic_fcoe_process_vlan_resp(9)Processes the vlan response from one FCF and populates VLAN list.✨
fnic_fcoe_reset_vlans(9)Free up the list of discovered vlans✨
fnic_fcoe_send_vlan_req(9)Send FIP vlan request to all FCFs MAC✨
fnic_fcoe_start_fcf_discovery(9)Start FIP FCF discovery in a selected vlan✨
fnic_fcoe_start_flogi(9)Send FIP FLOGI to the selected FCF✨
fnic_flush_tx(9)send queued frames.✨
fnic_handle_enode_ka_timer(9)FIP node keep alive.✨
fnic_handle_fcs_ka_timer(9)Handle FCS keep alive timer.✨
fnic_handle_fip_timer(9)Timeout handler for FIP discover phase.✨
fnic_handle_vn_ka_timer(9)FIP virtual port keep alive.✨
fnic_import_rq_eth_pkt(9)handle received FCoE or FIP frame.✨
fnic_tport_event_handler(9)Handler for remote port events in the tport_event_queue.✨
fnic_update_mac_locked(9)set data MAC address and filters.✨
fnic_vlan_discovery_timeout(9)Handle vlan discovery timeout✨
fnic_work_on_fcs_ka_timer(9)Handle work on FCS keep alive timer.✨
fns(9)find N'th set bit in a word✨
folio_add_anon_rmap_pmd(9)add a PMD mapping to a page range of an anon folio✨
folio_add_anon_rmap_ptes(9)add PTE mappings to a page range of an anon folio✨
folio_add_file_rmap_pmd(9)add a PMD mapping to a page range of a folio✨
folio_add_file_rmap_ptes(9)add PTE mappings to a page range of a folio✨
folio_add_file_rmap_pud(9)add a PUD mapping to a page range of a folio✨
folio_add_lru(9)Add a folio to an LRU list.✨
folio_add_lru_vma(9)Add a folio to the appropriate LRU list for this VMA.✨