📦 linux-manual

82568 pages · page 111 of 413

F (continued)

firmware_request_platform(9)request firmware with platform-fw fallback✨
firmware_upload_register(9)register for the firmware upload sysfs API✨
firmware_upload_unregister(9)Unregister firmware upload interface✨
FIRST_ARG(9)Returns the first argument.✨
first_dirty_cnode(9)find first dirty cnode.✨
first_nnode(9)find the first nnode in memory.✨
first_non_ff(9)find offset of the first non-0xff byte.✨
first_packet_length(9)return length of first packet in receive queue✨
first_zones_zonelist(9)Returns the first zone at or below highest_zoneidx within the allowed nodemask in a zonelist✨
fix_cl_hdr(9)Initialize fixed client header✨
fix_raw(9)For each raw term see if there is an event (aka alias) in pmu that matches the raw's string value. If the string value matches an event then change the term to be an event, if not then change it to…✨
fix_settings(9)reset any boot parameters which are out of range back to the default values.✨
fix_size_in_place(9)fix inode size in place on flash.✨
fix_unclean_leb(9)fix an unclean LEB.✨
fixed_bar_cap(9)return the offset of the fixed BAR cap if found✨
fixed_power(9)compute: x^n, in O(log n) time✨
fixed_power_int(9)compute: x^n, in O(log n) time✨
fixed_size_llseek(9)llseek implementation for fixed-sized devices✨
fixp_linear_interpolate(9)interpolates a value from two known points✨
fixp_q88_fromint(9)Convert integer to Q8.8✨
fixp_sin32(9)returns the sin of an angle in degrees✨
fixp_sin32_rad(9)calculates the sin of an angle in radians✨
FIXTURE(9)Called once per fixture to setup the data and register✨
FIXTURE_DATA(9)Wraps the struct name so we have one less argument to pass around✨
FIXTURE_SETUP(9)Prepares the setup function for the fixture. *_metadata* is included so that EXPECT_*, ASSERT_* etc. work correctly.✨
FIXTURE_TEARDOWN(9)✨
FIXTURE_TEARDOWN_PARENT(9)✨
FIXTURE_VARIANT(9)Optionally called once per fixture to declare fixture variant✨
FIXTURE_VARIANT_ADD(9)Called once per fixture variant to setup and register the data✨
fixup_free_space(9)find & remap all LEBs containing free space.✨
fixup_leb(9)fixup/unmap an LEB containing free space.✨
fixup_overlap_contain(9)Handle case where new key completely contains an existing key.✨
fixup_overlap_contained(9)Handle overlap when a new key is contained in an existing key.✨
fixup_overlap_head(9)Handle overlap when a new key overlaps with the head of an existing key.✨
fixup_overlap_tail(9)Adjust the key when it overlaps at the tail.✨
fixup_pi_owner(9)Post lock pi_state and corner case management✨
fixup_umip_exception(9)Fixup a general protection fault caused by UMIP✨
fixup_user_fault(9)manually resolve a user page fault✨
fl_cap(9)return the capacity of a Free List✨
fl_starving(9)return whether a Free List is starving.✨
Flags for CREATE_BO(9)✨
Flags for DRM_IOCTL_PVR_CREATE_BO (kernel-only)(9)✨
Flags for SUBMIT_JOB ioctl compute command.(9)✨
Flags for SUBMIT_JOB ioctl fragment command.(9)✨
Flags for SUBMIT_JOB ioctl geometry command.(9)✨
Flags for SUBMIT_JOB ioctl transfer command.(9)✨
Flags for the drm_pvr_sync_op object.(9)✨
Flags to request an action from the IRQ thread(9)✨
flash_wait_op(9)wait for a flash operation to complete✨
Flat-CCS - Memory compression for Local memory(9)✨
flex_array_size(9)Calculate size of a flexible array member within an enclosing structure.✨
flexonenand_addr(9)Return address of the block✨
flexonenand_block(9)For given address return block number✨
flexonenand_check_blocks_erased(9)Check if blocks are erased✨
flexonenand_get_boundary(9)Reads the SLC boundary✨
flexonenand_get_size(9)Fill up fields in onenand_chip and mtd_info boundary[], diesize[], mtd->size, mtd->erasesize✨
flexonenand_region(9)[Flex-OneNAND] Return erase region of addr✨
flip utils(9)✨
flipper_quiesce(9)quiesce flipper irq controller✨
flits_to_desc(9)returns the num of Tx descriptors for the given flits✨
float_to_long(9)Convert ieee754 reading from hardware to an integer✨
flock_lock_inode_wait(9)Apply a FLOCK-style lock to a file✨
Flow Control(9)✨
flow_offload_has_one_action(9)check if exactly one action is present✨
flow_rule_has_control_flags(9)check for presence of any control flags✨
flow_rule_has_enc_control_flags(9)check for presence of any control flags✨
flow_rule_is_supp_control_flags(9)check for supported control flags✨
flow_rule_is_supp_enc_control_flags(9)check for supported control flags✨
flow_rule_match_has_control_flags(9)match and check for any control flags✨
fls(9)find last (most-significant) bit set✨
fls64(9)find last set bit in a 64-bit word✨
flush(9)flush the FIFO to reach a clean state✨
flush_block_map_updates(9)Flush the block map now that all the reference counts are rebuilt.✨
flush_channel_fifos(9)clear the channel fifos✨
flush_coherent_icache(9)if a CPU has a coherent icache, flush it Return true if the cache was flushed, false otherwise✨
flush_dcache_icache_phys(9)Flush a page by its physical address✨
flush_dcache_range(9)Write any modified data cache blocks out to memory and invalidate them. Does not invalidate the corresponding instruction cache blocks.✨
flush_dcache_range_chunked(9)Write any modified data cache blocks out to memory and invalidate them, in chunks of up to FLUSH_CHUNK_SIZE Does not invalidate the corresponding instruction cache blocks.✨
flush_delayed_work(9)wait for a dwork to finish executing the last queueing✨
flush_for_reaping(9)A waiter callback for getting a vio with which to flush the lower layer prior to reaping.✨
flush_i2c_fifo(9)This function flushes the I2C FIFO✨
flush_icache_range(9)Write any modified data cache blocks out to memory and invalidate the corresponding blocks in the instruction cache✨
flush_iotlb_all(9)Clear all iommu tlb entries✨
flush_iotlb_page(9)Clear an iommu tlb entry✨
flush_packer_callback(9)Flush the packer.✨
flush_rcu_work(9)wait for a rwork to finish executing the last queueing✨
flush_smp_call_function_queue(9)Flush pending smp-call-function callbacks from task context (idle, migration thread)✨
flush_sndbuf_sync(9)Flush send buffer and wait for completion✨
flush_tlb_before_set(9)invalidate a kernel PTE's TLB before re-setting it✨
flush_to_ldisc(9)flush data from buffer to ldisc✨
flush_trash_fifo(9)clear the trash fifo✨
flush_vdo(9)Start processing a flush request.✨
flush_work(9)wait for a work to finish executing the last queueing instance✨
flush_workqueue_prep_pwqs(9)prepare pwqs for workqueue flushing✨
fm10k_add_rx_frag(9)Add contents of Rx buffer to sk_buff✨
fm10k_alloc_q_vector(9)Allocate memory for a single interrupt vector✨
fm10k_alloc_q_vectors(9)Allocate memory for interrupt vectors✨
fm10k_alloc_rx_buffers(9)Replace used receive buffers✨
fm10k_assign_rings(9)Map rings to network devices✨
fm10k_cache_ring_qos(9)Descriptor ring to register mapping for QoS✨
fm10k_cache_ring_rss(9)Descriptor ring to register mapping for RSS✨
fm10k_check_hang_subtask(9)check for hung queues and dropped interrupts✨
fm10k_clean_all_rx_rings(9)Free Rx Buffers for all queues✨
fm10k_clean_all_tx_rings(9)Free Tx Buffers for all queues✨
fm10k_clean_rx_ring(9)Free Rx Buffers per Queue✨
fm10k_clean_tx_irq(9)Reclaim resources after transmit completes✨
fm10k_clean_tx_ring(9)Free Tx Buffers✨
fm10k_cleanup_headers(9)Correct corrupted or empty headers✨
fm10k_clear_macvlan_queue(9)Cancel pending updates for a given glort✨
fm10k_clear_queueing_scheme(9)Clear the current queueing scheme settings✨
fm10k_close(9)Disables a network interface✨
fm10k_configure_dglort(9)Configure Receive DGLORT after reset✨
fm10k_configure_dglort_map_pf(9)Configures GLORT entry and queues✨
fm10k_configure_dglort_map_vf(9)Configures GLORT entry and queues✨
fm10k_configure_rx(9)Configure Receive Unit after Reset✨
fm10k_configure_rx_ring(9)Configure Rx ring after Reset✨
fm10k_configure_swpri_map(9)Configure Receive SWPRI to PC mapping✨
fm10k_configure_tx(9)Configure Transmit Unit after Reset✨
fm10k_configure_tx_ring(9)Configure Tx ring after Reset✨
fm10k_crc_16b(9)Generate a 16 bit CRC for a region of 16 bit data✨
fm10k_dbg_exit(9)clean out the driver's debugfs entries✨
fm10k_dbg_init(9)start up debugfs for the driver✨
fm10k_dbg_intfc_exit(9)clean out the interface's debugfs entries✨
fm10k_dbg_intfc_init(9)setup the debugfs directory for the intferface✨
fm10k_dbg_q_vector_exit(9)setup debugfs for the q_vectors✨
fm10k_dbg_q_vector_init(9)setup debugfs for the q_vectors✨
fm10k_dcbnl_getdcbx(9)get the DCBX configuration for the device✨
fm10k_dcbnl_ieee_getets(9)get the ETS configuration for the device✨
fm10k_dcbnl_ieee_getpfc(9)get the PFC configuration for the device✨
fm10k_dcbnl_ieee_setets(9)set the ETS configuration for the device✨
fm10k_dcbnl_ieee_setpfc(9)set the PFC configuration for the device✨
fm10k_dcbnl_set_ops(9)Configures dcbnl ops pointer for netdev✨
fm10k_dcbnl_setdcbx(9)get the DCBX configuration for the device✨
fm10k_disable_queues_generic(9)Stop Tx/Rx queues✨
fm10k_enable_tx_ring(9)Verify Tx ring is enabled after configuration✨
fm10k_exit_module(9)Driver Exit Cleanup Routine✨
fm10k_fifo_crc(9)generate a CRC based off of FIFO data✨
fm10k_fifo_drop_all(9)Drop all messages in FIFO✨
fm10k_fifo_empty(9)Test to verify if FIFO is empty✨
fm10k_fifo_enqueue(9)Enqueues the message to the tail of the FIFO✨
fm10k_fifo_head_drop(9)Drop the first message in FIFO✨
fm10k_fifo_head_len(9)Retrieve length of first message in FIFO✨
fm10k_fifo_head_offset(9)returns indices of head with given offset✨
fm10k_fifo_init(9)Initialize a message FIFO✨
fm10k_fifo_tail_offset(9)returns indices of tail with given offset✨
fm10k_fifo_unused(9)Retrieve unused space in FIFO✨
fm10k_fifo_used(9)Retrieve used space in FIFO✨
fm10k_fifo_write_copy(9)pulls data off of msg and places it in FIFO✨
fm10k_free_all_rx_resources(9)Free Rx Resources for All Queues✨
fm10k_free_all_tx_resources(9)Free Tx Resources for All Queues✨
fm10k_free_q_vector(9)Free memory allocated for specific interrupt vector✨
fm10k_free_q_vectors(9)Free memory allocated for interrupt vectors✨
fm10k_free_rx_resources(9)Free Rx Resources✨
fm10k_free_tx_resources(9)Free Tx Resources per Queue✨
fm10k_get_bus_info_generic(9)Generic set PCI bus info✨
fm10k_get_fault_pf(9)Record a fault in one of the interface units✨
fm10k_get_host_state_generic(9)Returns the state of the host✨
fm10k_get_host_state_pf(9)Returns the state of the switch and mailbox✨
fm10k_get_invariants_generic(9)Inits constant values✨
fm10k_get_stats64(9)Get System Network Statistics✨
fm10k_get_tx_pending(9)how many Tx descriptors not processed✨
fm10k_glort_valid_pf(9)Validate that the provided glort is valid✨
fm10k_host_mbx_ready(9)Check PF interface's mailbox readiness✨
fm10k_init_hw_pf(9)PF hardware initialization✨
fm10k_init_hw_vf(9)VF hardware initialization✨
fm10k_init_module(9)Driver Registration Routine✨
fm10k_init_msix_capability(9)configure MSI-X capability✨
fm10k_init_queueing_scheme(9)Determine proper queueing scheme✨
fm10k_io_error_detected(9)called when PCI error is detected✨
fm10k_io_reset_done(9)called when PCI function has finished resetting✨
fm10k_io_reset_prepare(9)called when PCI function is about to be reset✨
fm10k_io_resume(9)called when traffic can start flowing again.✨
fm10k_io_slot_reset(9)called after the pci bus has been reset.✨
fm10k_iov_assign_default_mac_vlan_pf(9)Assign a MAC and VLAN to VF✨
fm10k_iov_assign_int_moderator_pf(9)Add VF interrupts to moderator list✨
fm10k_iov_assign_resources_pf(9)Assign pool resources for virtualization✨
fm10k_iov_configure_tc_pf(9)Configure the shaping group for VF✨
fm10k_iov_msg_lport_state_pf(9)Message handler for port state requests✨
fm10k_iov_msg_msix_pf(9)Message handler for MSI-X request from VF✨
fm10k_iov_msg_queue_mac_vlan(9)Message handler for MAC/VLAN request from VF✨
fm10k_iov_reset_lport_pf(9)Disable a logical port for a given VF✨
fm10k_iov_reset_resources_pf(9)Reassign queues and interrupts to a VF✨
fm10k_iov_select_vid(9)Select correct default VLAN ID✨
fm10k_iov_set_lport_pf(9)Assign and enable a logical port for a given VF✨
fm10k_iov_supported_xcast_mode_pf(9)Determine best match for xcast mode✨
fm10k_iov_update_stats(9)Update stats for all VFs✨
fm10k_iov_update_stats_pf(9)Updates hardware related statistics for VFs✨
fm10k_is_ari_hierarchy_pf(9)Indicate ARI hierarchy support✨
fm10k_is_non_eop(9)process handling of non-EOP buffers✨
fm10k_macvlan_schedule(9)Schedule MAC/VLAN queue task✨
fm10k_macvlan_task(9)send queued MAC/VLAN requests to switch manager✨
fm10k_mbx_connect(9)Start mailbox connection✨
fm10k_mbx_connect_reset(9)Reset following request for reset✨
fm10k_mbx_create_connect_hdr(9)Generate a connect mailbox header✨
fm10k_mbx_create_data_hdr(9)Generate a data mailbox header✨
fm10k_mbx_create_disconnect_hdr(9)Generate a disconnect mailbox header✨
fm10k_mbx_create_error_msg(9)Generate an error message✨
fm10k_mbx_create_fake_disconnect_hdr(9)Generate a false disconnect mbox hdr✨
fm10k_mbx_create_reply(9)Generate reply based on state and remote head✨
fm10k_mbx_dequeue_rx(9)Dequeues the message from the head in the Rx FIFO✨