📦 linux-manual

D (continued)

• dpu_encoder_wait_for_commit_done(9)Wait for encoder to flush pending state✨
• dpu_encoder_wait_for_tx_complete(9)Wait for encoder to transfer pixels to panel✨
• dpu_find_format(9)validate if the pixel format is supported✨
• dpu_format_populate_addrs(9)populate buffer addresses based on mmu, fb, and format found in the fb✨
• dpu_format_populate_plane_sizes(9)populate non-address part of the layout based on fb, and format found in the fb✨
• dpu_hw_cdm_init(9)initializes the cdm hw driver object. should be called once before accessing every cdm.✨
• dpu_hw_ctl_init(9)Initializes the ctl_path hw driver object. Should be called before accessing any ctl_path register.✨
• dpu_hw_cwb_init(9)Initializes the writeback hw driver object with cwb.✨
• dpu_hw_dsc_init(9)Initializes the DSC hw driver object.✨
• dpu_hw_dsc_init_1_2(9)initializes the v1.2 DSC hw driver object✨
• dpu_hw_dspp_init(9)Initializes the DSPP hw driver object. should be called once before accessing every DSPP.✨
• dpu_hw_intf_init(9)Initializes the INTF driver for the passed interface catalog entry.✨
• dpu_hw_intr_init(9)Initializes the interrupts hw object✨
• dpu_hw_lm_init(9)Initializes the mixer hw driver object. should be called once before accessing every mixer.✨
• dpu_hw_mdptop_init(9)initializes the top driver for the passed config✨
• dpu_hw_merge_3d_init(9)Initializes the merge_3d driver for the passed merge3d catalog entry.✨
• dpu_hw_pingpong_init(9)initializes the pingpong driver for the passed pingpong catalog entry.✨
• dpu_hw_sspp_init(9)Initializes the sspp hw driver object. Should be called once before accessing every pipe.✨
• dpu_hw_vbif_init(9)Initializes the VBIF driver for the passed VBIF catalog entry.✨
• dpu_hw_wb_init(9)Initializes the writeback hw driver object.✨
• dpu_kms_get_clk_rate(9)get the clock rate✨
• dpu_plane_flush(9)final plane operations before commit flush✨
• dpu_plane_init(9)create new dpu plane for the given pipe✨
• dpu_plane_init_virtual(9)create new virtualized DPU plane✨
• dpu_plane_set_error(9)enable/disable error condition✨
• dpu_rm_get_assigned_resources(9)Get hw resources of the given type that are assigned to this encoder✨
• dpu_rm_get_intf(9)Return a struct dpu_hw_intf instance given it's index.✨
• dpu_rm_get_sspp(9)Return a struct dpu_hw_sspp instance given it's index.✨
• dpu_rm_get_wb(9)Return a struct dpu_hw_wb instance given it's index.✨
• dpu_rm_init(9)Read hardware catalog and create reservation tracking objects for all HW blocks.✨
• dpu_rm_print_state(9)output the RM private state✨
• dpu_rm_release(9)Given the encoder for the display chain, release any HW blocks previously reserved for that use case.✨
• dpu_rm_release_all_sspp(9)Given the CRTC, release all SSPP blocks previously reserved for that use case.✨
• dpu_rm_reserve(9)Given a CRTC->Encoder->Connector display chain, analyze the use connections and user requirements, specified through related topology control properties, and reserve hardware blocks to that display…✨
• dpu_rm_reserve_sspp(9)Reserve the required SSPP for the provided CRTC✨
• dpu_vbif_clear_errors(9)clear any vbif errors✨
• dpu_vbif_init_memtypes(9)initialize xin memory types for vbif✨
• dpu_vbif_set_ot_limit(9)set OT based on usecase & configuration parameters✨
• dpu_vbif_set_qos_remap(9)set QoS priority level remap✨
• DQA - Dynamic Queue Allocation -introduction(9)✨
• drain(9)drains chip in case Tx completions fail to arrive due to pause.✨
• drain_data_vio_pool(9)Wait asynchronously for all data_vios to be returned to the pool.✨
• drain_slab(9)Drain all reference count I/O.✨
• drain_slab_depot(9)Flush out all dirty refcounts blocks now that they have been rebuilt or recovered.✨
• drain_workqueue(9)drain a workqueue✨
• dram_pg_pool_do_release(9)free DRAM pages pool✨
• DRBD State macros(9)✨
• drbd_al_shrink(9)Removes all active extents form the activity log✨
• drbd_alloc_pages(9)Returns @number pages, retries forever (or until signalled)✨
• drbd_bitmap_io(9)Does an IO operation on the whole bitmap✨
• drbd_bm_mark_for_writeout(9)mark a page with a "hint" to be considered for writeout✨
• drbd_bm_write_lazy(9)Write bitmap pages 0 to @upper_idx-1, if they have changed.✨
• drbd_bmio_clear_n_write(9)io_fn for drbd_queue_bitmap_io() or drbd_bitmap_io()✨
• drbd_bmio_set_n_write(9)io_fn for drbd_queue_bitmap_io() or drbd_bitmap_io()✨
• drbd_chk_io_error(9)Handle the on_io_error setting, should be called from all io completion handlers✨
• drbd_contains_interval(9)check if a tree contains a given interval✨
• drbd_find_overlap(9)search for an interval overlapping with [sector, sector + size)✨
• drbd_force_state(9)Impose a change which happens outside our control on our state✨
• drbd_get_max_capacity(9)Returns the capacity we announce to out peer✨
• drbd_may_finish_epoch(9)Applies an epoch_event to the epoch's state, eventually finishes it.✨
• drbd_md_first_sector(9)Returns the first sector number of the meta data area✨
• drbd_md_last_sector(9)Return the last sector number of the meta data area✨
• drbd_md_mark_dirty(9)Mark meta data super block as dirty✨
• drbd_md_read(9)Reads in the meta data super block✨
• drbd_md_ss(9)Return the sector number of our meta data super block✨
• drbd_md_sync(9)Writes the meta data super block if the MD_DIRTY flag bit is set✨
• drbd_pause_after(9)Pause resync on all devices that may not resync now✨
• drbd_queue_bitmap_io(9)Queues an IO operation on the whole bitmap✨
• drbd_req_state(9)Perform an eventually cluster wide state change✨
• drbd_request_state(9)Request a state change✨
• drbd_resume_next(9)Resume resync on all devices that may resync now✨
• drbd_rs_begin_io(9)Gets an extent in the resync LRU cache and sets it to BME_LOCKED✨
• drbd_rs_cancel_all(9)Removes all extents from the resync LRU (even BME_LOCKED)✨
• drbd_rs_del_all(9)Gracefully remove all extents from the resync LRU✨
• drbd_send_ack(9)Sends an ack packet✨
• drbd_send_current_state(9)Sends the drbd state to the peer✨
• drbd_send_state(9)After a state change, sends the new state to the peer✨
• drbd_socket_okay(9)Free the socket if its connection is not okay✨
• drbd_start_resync(9)Start the resync process✨
• drbd_submit_peer_request(9)✨
• drbd_thread_current_set_cpu(9)modifies the cpu mask of the _current_ thread✨
• drbd_try_rs_begin_io(9)Gets an extent in the resync LRU cache, does not sleep✨
• drbd_uuid_new_current(9)Creates a new current UUID✨
• drbd_wait_misc(9)wait for a request to make progress✨
• drci_rd_reg(9)read a DCI register✨
• drci_wr_reg(9)write a DCI register✨
• Driver description(9)✨
• driver instance overview(9)✨
• Driver limitations(9)✨
• Driver load when CSME is associated and a session is active(9)✨
• Driver load when CSME owns the device(9)✨
• Driver modes of operation in terms of display buffers used(9)✨
• Driver power control(9)✨
• driver specific ioctls(9)✨
• Driver system flows - drv component(9)✨
• driver_attach(9)try to bind driver to devices.✨
• driver_create_file(9)create sysfs file for driver.✨
• driver_deferred_probe_check_state(9)Check deferred probe state✨
• driver_deferred_probe_trigger(9)Kick off re-probing deferred devices✨
• driver_detach(9)detach driver from all devices it controls.✨
• driver_find(9)locate driver on a bus by its name.✨
• driver_find_device(9)device iterator for locating a particular device.✨
• driver_find_device_by_acpi_dev(9)device iterator for locating a particular device matching the ACPI_COMPANION device.✨
• driver_find_device_by_devt(9)device iterator for locating a particular device by devt.✨
• driver_find_device_by_fwnode(9)device iterator for locating a particular device by fwnode pointer.✨
• driver_find_device_by_name(9)device iterator for locating a particular device of a specific name.✨
• driver_find_device_by_of_node(9)device iterator for locating a particular device by of_node pointer.✨
• driver_for_each_device(9)Iterator for devices bound to a driver.✨
• driver_init(9)initialize driver model.✨
• driver_probe_device(9)attempt to bind device & driver together✨
• driver_probe_done(9)✨
• driver_register(9)register driver with bus✨
• driver_remove_file(9)remove sysfs file for driver.✨
• driver_unregister(9)remove driver from system.✨
• DRM Client usage stats(9)✨
• drm leasing(9)✨
• drm panel(9)✨
• DRM RAS Node Management(9)✨
• drm utils(9)✨
• DRM_ACCEL_FOPS(9)Default drm accelerators file operations✨
• drm_add_edid_modes(9)add modes from EDID data, if available✨
• drm_add_modes_noedid(9)add modes for the connectors without EDID✨
• drm_analog_tv_mode(9)create a display mode for an analog TV✨
• drm_any_plane_has_format(9)Check whether any plane supports this format and modifier combination✨
• DRM_ASAHI_BARRIER_NONE(9)Command index for no barrier✨
• drm_atomic_add_affected_colorops(9)add colorops for plane✨
• drm_atomic_add_affected_connectors(9)add connectors for CRTC✨
• drm_atomic_add_affected_planes(9)add planes for CRTC✨
• drm_atomic_add_encoder_bridges(9)add bridges attached to an encoder✨
• drm_atomic_bridge_chain_check(9)Do an atomic check on the bridge chain✨
• drm_atomic_bridge_chain_disable(9)disables all bridges in the encoder chain✨
• drm_atomic_bridge_chain_enable(9)enables all bridges in the encoder chain✨
• drm_atomic_bridge_chain_post_disable(9)cleans up after disabling all bridges in the encoder chain✨
• drm_atomic_bridge_chain_pre_enable(9)prepares for enabling all bridges in the encoder chain✨
• drm_atomic_check_only(9)check whether a given config would work✨
• drm_atomic_commit(9)commit configuration atomically✨
• drm_atomic_commit_alloc(9)allocate atomic state✨
• drm_atomic_commit_clear(9)clear state object✨
• drm_atomic_commit_default_clear(9)clear base atomic state✨
• drm_atomic_commit_default_release(9)release memory initialized by drm_atomic_commit_init✨
• drm_atomic_commit_get(9)acquire a reference to the atomic state✨
• drm_atomic_commit_init(9)init new atomic state✨
• drm_atomic_commit_put(9)release a reference to the atomic state✨
• drm_atomic_crtc_effectively_active(9)compute whether CRTC is actually active✨
• drm_atomic_crtc_for_each_plane(9)iterate over planes currently attached to CRTC✨
• drm_atomic_crtc_needs_modeset(9)compute combined modeset need✨
• drm_atomic_crtc_state_for_each_plane(9)iterate over attached planes in new state✨
• drm_atomic_crtc_state_for_each_plane_state(9)iterate over attached planes in new state✨
• drm_atomic_for_each_plane_damage(9)Iterator macro for plane damage.✨
• drm_atomic_get_bridge_state(9)get bridge state✨
• drm_atomic_get_colorop_state(9)get colorop state✨
• drm_atomic_get_connector_for_encoder(9)Get connector currently assigned to an encoder✨
• drm_atomic_get_connector_state(9)get connector state✨
• drm_atomic_get_crtc_state(9)get CRTC state✨
• drm_atomic_get_mst_topology_state(9)get MST topology state✨
• drm_atomic_get_new_bridge_state(9)get new bridge state, if it exists✨
• drm_atomic_get_new_colorop_state(9)get colorop state, if it exists✨
• drm_atomic_get_new_connector_for_encoder(9)Get new connector for an encoder✨
• drm_atomic_get_new_connector_state(9)get connector state, if it exists✨
• drm_atomic_get_new_crtc_for_encoder(9)Get new crtc for an encoder✨
• drm_atomic_get_new_crtc_state(9)get new CRTC state, if it exists✨
• drm_atomic_get_new_mst_topology_state(9)get new MST topology state in atomic state, if any✨
• drm_atomic_get_new_plane_state(9)get plane state, if it exists✨
• drm_atomic_get_new_private_obj_state(9)✨
• drm_atomic_get_old_bridge_state(9)get old bridge state, if it exists✨
• drm_atomic_get_old_colorop_state(9)get colorop state, if it exists✨
• drm_atomic_get_old_connector_for_encoder(9)Get old connector for an encoder✨
• drm_atomic_get_old_connector_state(9)get connector state, if it exists✨
• drm_atomic_get_old_crtc_for_encoder(9)Get old crtc for an encoder✨
• drm_atomic_get_old_crtc_state(9)get old CRTC state, if it exists✨
• drm_atomic_get_old_mst_topology_state(9)get old MST topology state in atomic state, if any✨
• drm_atomic_get_old_plane_state(9)get plane state, if it exists✨
• drm_atomic_get_old_private_obj_state(9)✨
• drm_atomic_get_plane_state(9)get plane state✨
• drm_atomic_get_private_obj_state(9)get private object state✨
• drm_atomic_helper_async_check(9)check if state can be committed asynchronously✨
• drm_atomic_helper_async_commit(9)commit state asynchronously✨
• drm_atomic_helper_bridge_create_state(9)default &drm_bridge_funcs.atomic_create_state hook for bridges✨
• drm_atomic_helper_bridge_destroy_state(9)Destroy a bridge state object✨
• drm_atomic_helper_bridge_duplicate_state(9)Duplicate a bridge state object✨
• drm_atomic_helper_bridge_get_hdmi_output_bus_fmts(9)helper implementing atomic_get_output_bus_fmts for HDMI✨
• drm_atomic_helper_bridge_propagate_bus_fmt(9)Propagate output format to the input end of a bridge✨
• drm_atomic_helper_calc_timestamping_constants(9)update vblank timestamping constants✨
• drm_atomic_helper_check(9)validate state object✨
• drm_atomic_helper_check_crtc_primary_plane(9)Check CRTC state for primary plane✨
• drm_atomic_helper_check_modeset(9)validate state object for modeset changes✨
• drm_atomic_helper_check_plane_damage(9)Verify plane damage on atomic_check.✨
• drm_atomic_helper_check_plane_state(9)Check plane state for validity✨
• drm_atomic_helper_check_planes(9)validate state object for planes changes✨
• drm_atomic_helper_check_wb_connector_state(9)Check writeback connector state✨
• drm_atomic_helper_cleanup_planes(9)cleanup plane resources after commit✨
• drm_atomic_helper_colorop_create_state(9)Allocates and initializes colorop atomic state✨
• drm_atomic_helper_commit(9)commit validated state object✨
• drm_atomic_helper_commit_cleanup_done(9)signal completion of commit✨
• drm_atomic_helper_commit_crtc_disable(9)disable CRTSs✨
• drm_atomic_helper_commit_crtc_enable(9)enables the CRTCs✨
• drm_atomic_helper_commit_crtc_set_mode(9)set the new mode✨
• drm_atomic_helper_commit_duplicated_state(9)commit duplicated state✨
• drm_atomic_helper_commit_encoder_bridge_disable(9)disable bridges and encoder✨
• drm_atomic_helper_commit_encoder_bridge_enable(9)enables the bridges✨