📦 linux-manual

# (continued)

• __rxe_init_mcg(9)initialize a new mcg✨
• __rxe_insert_mcg(9)insert an mcg into red-black tree (rxe->mcg_tree)✨
• __rxe_lookup_mcg(9)lookup mcg in rxe->mcg_tree while holding lock✨
• __rxe_publish_mcg(9)make a fully initialized mcg visible in mcg_tree✨
• __rxe_remove_mcg(9)remove an mcg from red-black tree holding lock✨
• __save_processor_state(9)Save CPU registers before creating a hibernation image and before restoring the memory state from it✨
• __sb_write_started(9)check if sb freeze level is held✨
• __sbi_set_timer_v01(9)Program the timer for next timer event.✨
• __sbitmap_for_each_set(9)Iterate over each set bit in a &struct sbitmap.✨
• __sbitmap_queue_get(9)Try to allocate a free bit from a &struct sbitmap_queue with preemption already disabled.✨
• __sbitmap_queue_get_batch(9)Try to allocate a batch of free bits✨
• __sca3000_get_base_freq(9)obtain mode specific base frequency✨
• __sca3000_unlock_reg_lock(9)unlock the control registers✨
• __schedule_ubi_work(9)schedule a work.✨
• __scmi_enable_evt(9)Enable/disable events generation✨
• __scmi_event_handler_get_ops(9)Utility to get or create an event handler✨
• __scmi_xfer_put(9)Release a message✨
• __scoped_user_access(9)Open a scope for user access✨
• __scoped_user_access_begin(9)Start a scoped user access✨
• __scsi_device_lookup(9)find a device given the host (UNLOCKED)✨
• __scsi_device_lookup_by_target(9)find a device given the target (UNLOCKED)✨
• __scsi_queue_insert(9)private queue insertion✨
• __scx_add_event(9)Increase an event counter for 'name' by 'cnt'✨
• __scx_bpf_dsq_insert_vtime(9)Arg-wrapped vtime DSQ insertion✨
• __scx_bpf_select_cpu_and(9)Arg-wrapped CPU selection with cpumask✨
• __scx_cid_to_cpu(9)Unchecked cid->cpu table lookup✨
• __SCX_CMASK_DEFINE(9)Define an on-stack cmask with explicit storage capacity✨
• __scx_cmask_init(9)Initialize @m with explicit storage capacity✨
• __scx_cpu_to_cid(9)Unchecked cpu->cid table lookup✨
• __scx_init_task(9)Initialize a task for a sched✨
• __sdio_register_driver(9)register a function driver✨
• __sdma_txclean(9)clean tx of mappings, descp *kmalloc's✨
• __sdw_register_driver(9)register a SoundWire Slave driver✨
• __security_genfs_sid(9)Helper to obtain a SID for a file in a filesystem✨
• __security_read_policy(9)read the policy.✨
• __serdev_device_driver_register(9)Register client driver with serdev core✨
• __set_agg_ports_ready(9)set value of Ready bit in all ports of an aggregator✨
• __set_flex_counter(9)Set the counter associated with the given flexible array member that has been annoated by __counted_by().✨
• __set_input_tf(9)calculates the input transfer function based on expected input space.✨
• __set_input_tf_32(9)calculates the input transfer function based on expected input space.✨
• __set_legacy_tf(9)Calculates the legacy transfer function✨
• __set_output_tf(9)calculates the output transfer function based on expected input space.✨
• __set_output_tf_32(9)calculates the output transfer function based on expected input space.✨
• __set_pfnblock_flags_mask(9)Set the requested group of flags for a pageblock_nr_pages block of pages✨
• __sg_alloc_table(9)Allocate and initialize an sg table with given allocator✨
• __sg_free_table(9)Free a previously mapped sg table✨
• __sg_next(9)return the next scatterlist entry in a list✨
• __sgx_alloc_epc_page(9)Allocate an EPC page✨
• __sgx_encl_get_backing(9)Pin the backing storage✨
• __shost_for_each_device(9)iterate over all devices of a host (UNLOCKED)✨
• __sink(9)Hide @expr's value from the compiler and BPF verifier✨
• __sk_mem_raise_allocated(9)increase memory_allocated✨
• __sk_mem_reclaim(9)reclaim sk_forward_alloc and memory_allocated✨
• __sk_mem_reduce_allocated(9)reclaim memory_allocated✨
• __sk_mem_schedule(9)increase sk_forward_alloc and memory_allocated✨
• __skb_dequeue(9)remove from the head of the queue✨
• __skb_dequeue_tail(9)remove from the tail of the queue✨
• __skb_ext_alloc(9)allocate a new skb extensions storage✨
• __skb_ext_set(9)attach the specified extension storage to this skb✨
• __skb_fill_netmem_desc(9)initialise a fragment in an skb✨
• __skb_flow_dissect(9)extract the flow_keys struct and return it✨
• __skb_flow_dissect_batadv(9)dissect batman-adv header✨
• __skb_frag_dma_map(9)maps a paged fragment via the DMA API✨
• __skb_frag_ref(9)take an addition reference on a paged fragment.✨
• __skb_frag_unref(9)release a reference on a paged fragment.✨
• __skb_get_hash_net(9)calculate a flow hash✨
• __skb_gso_segment(9)Perform segmentation on skb.✨
• __skb_header_release(9)allow clones to use the headroom✨
• __skb_pad(9)zero pad the tail of an skb✨
• __skb_peek(9)peek at the head of a non-empty &sk_buff_head✨
• __skb_put_padto(9)increase size and pad an skbuff up to a minimal size✨
• __skb_queue_after(9)queue a buffer at the list head✨
• __skb_queue_head(9)queue a buffer at the list head✨
• __skb_queue_head_init(9)initialize non-spinlock portions of sk_buff_head✨
• __skb_queue_purge_reason(9)empty a list✨
• __skb_queue_tail(9)queue a buffer at the list tail✨
• __skb_try_recv_datagram(9)Receive a datagram skbuff✨
• __skb_tunnel_rx(9)prepare skb for rx reinsert✨
• __smb2_copychunk_range(9)server-side copy of data range✨
• __smb2_lease_break_noti(9)send lease break command from server to client✨
• __smb2_oplock_break_noti(9)send smb2 oplock break cmd from conn to client✨
• __smb_break_all_levII_oplock(9)send level2 oplock or read lease break command from server to client✨
• __snd_hda_add_vmaster(9)create a virtual master control and add followers✨
• __snd_hda_codec_cleanup_stream(9)clean up the codec for closing✨
• __snd_pcm_set_state(9)Change the current PCM state✨
• __sock_create(9)creates a socket✨
• __spi_alloc_controller(9)allocate an SPI host or target controller✨
• __spi_pump_messages(9)function which processes SPI message queue✨
• __spi_register_driver(9)register a SPI driver✨
• __splice_from_pipe(9)splice data from a pipe to given actor✨
• __split_unmapped_folio(9)splits an unmapped @folio to lower order folios in two ways: uniform split or non-uniform split.✨
• __spmi_driver_register(9)Register client driver with SPMI core✨
• __ssam_device_driver_register(9)Register a SSAM client device driver.✨
• __ssam_notifier_unregister(9)Unregister an event notifier.✨
• __ssam_register_clients(9)Register client devices defined under the given firmware node as children of the given device.✨
• __ssam_retry(9)Retry request in case of I/O errors or timeouts.✨
• __ssp_disable_rxwm(9)disable receive watermark interrupts✨
• __ssp_disable_txwm(9)disable transmit watermark interrupts✨
• __ssp_early_readl(9)read from a SiFive serial port register (early)✨
• __ssp_early_writel(9)write to a SiFive serial port register (early)✨
• __ssp_enable_rxwm(9)enable receive watermark interrupts✨
• __ssp_enable_txwm(9)enable transmit watermark interrupts✨
• __ssp_readl(9)read from a SiFive serial port register✨
• __ssp_receive_char(9)receive a byte from the UART✨
• __ssp_receive_chars(9)receive multiple bytes from the UART✨
• __ssp_set_stop_bits(9)set the number of stop bits✨
• __ssp_transmit_char(9)enqueue a byte to transmit onto the TX FIFO✨
• __ssp_transmit_chars(9)enqueue multiple bytes onto the TX FIFO✨
• __ssp_update_baud_rate(9)set the UART "baud rate"✨
• __ssp_update_div(9)calculate the divisor setting by the line rate✨
• __ssp_wait_for_xmitr(9)wait for an empty slot on the TX FIFO✨
• __ssp_writel(9)write to a SiFive serial port register✨
• __sta_info_flush(9)flush matching STA entries from the STA table✨
• __stack_depot_get_stack_record(9)Get a pointer to a stack_record struct✨
• __starget_for_each_device(9)helper to walk all devices of a target (UNLOCKED)✨
• __start_renaming(9)lookup and lock names for rename✨
• __stm_source_link_drop(9)detach stm_source from an stm device✨
• __stmmac_open(9)open entry point of the driver✨
• __strn_find_child(9)find a profile on @head list using substring of @name✨
• __struct_group(9)Create a mirrored named and anonyomous struct✨
• __subdev_set_power(9)change power state of a single subdev✨
• __submit_metadata_vio(9)Submit I/O for a metadata vio.✨
• __sw_hweightN - returns the hamming weight of a N-bit word(9)✨
• __swab16(9)return a byteswapped 16-bit value✨
• __swab16p(9)return a byteswapped 16-bit value from a pointer✨
• __swab16s(9)byteswap a 16-bit value in-place✨
• __swab32(9)return a byteswapped 32-bit value✨
• __swab32p(9)return a byteswapped 32-bit value from a pointer✨
• __swab32s(9)byteswap a 32-bit value in-place✨
• __swab64(9)return a byteswapped 64-bit value✨
• __swab64p(9)return a byteswapped 64-bit value from a pointer✨
• __swab64s(9)byteswap a 64-bit value in-place✨
• __swahb32(9)return a high and low byte-swapped 32-bit value✨
• __swahb32p(9)return a high and low byteswapped 32-bit value from a pointer✨
• __swahb32s(9)high and low byteswap a 32-bit value in-place✨
• __swahw32(9)return a word-swapped 32-bit value✨
• __swahw32p(9)return a wordswapped 32-bit value from a pointer✨
• __swahw32s(9)wordswap a 32-bit value in-place✨
• __swap_cache_add_check(9)Check if a range is suitable for adding a folio.✨
• __swap_cache_add_folio(9)Add a folio to the swap cache and update stats.✨
• __swap_cache_del_folio(9)Removes a folio from the swap cache.✨
• __swap_cache_replace_folio(9)Replace a folio in the swap cache.✨
• __swiotlb_find_pool(9)find the IO TLB pool for a physical address✨
• __switch_to(9)switch execution of a task✨
• __synth_event_gen_cmd_start(9)Start a synthetic event command from arg list✨
• __sysfs_match_string(9)matches given string in an array✨
• __task_cred(9)Access a task's objective credentials✨
• __task_lazy_mmu_mode_active(9)Test the lazy MMU mode state for a task.✨
• __task_lazy_mmu_mode_pause(9)Pause the lazy MMU mode for a task.✨
• __task_lazy_mmu_mode_resume(9)Resume the lazy MMU mode for a task.✨
• __tcs_buffer_write(9)Write to TCS hardware from a request; don't trigger.✨
• __tcs_set_trigger(9)Start xfer on a TCS or unset trigger on a borrowed TCS✨
• __thermal_zone_get_temp(9)returns the temperature of a thermal zone✨
• __timekeeping_inject_offset(9)Adds or subtracts from the current time.✨
• __timekeeping_inject_sleeptime(9)Internal function to add sleep interval✨
• __timer_delete(9)Internal function: Deactivate a timer✨
• __timer_delete_sync(9)Internal function: Deactivate a timer and wait for the handler to finish.✨
• __tipc_bind(9)associate or disassociate TIPC name(s) with a socket✨
• __tipc_node_link_down(9)handle loss of link✨
• __tipc_node_link_up(9)handle addition of link✨
• __trace_bputs(9)write the pointer to a constant string into trace buffer✨
• __trace_puts(9)write a constant string into the trace buffer.✨
• __TRAILING_OVERLAP(9)Overlap a flexible-array member with trailing members.✨
• __trdma_clean_swqe(9)clean up for large sized QPs✨
• __trigger_tid_waiter(9)trigger tid waiter✨
• __try_to_del_timer_sync(9)Internal function: Try to deactivate a timer✨
• __ttc_clocksource_read(9)Reads the timer counter register✨
• __tty_alloc_driver(9)allocate tty driver✨
• __tty_buffer_request_room(9)grow tty buffer if needed✨
• __tty_check_change(9)check for POSIX terminal changes✨
• __tty_hangup(9)actual handler for hangup events✨
• __uart_read_properties(9)read firmware properties of the given UART port✨
• __ubifs_exit_authentication(9)release resource✨
• __ubifs_hash_get_desc(9)get a descriptor suitable for hashing a node✨
• __ubifs_node_calc_hash(9)calculate the hash of a UBIFS node✨
• __ubifs_node_check_hash(9)check the hash of a node against given hash✨
• __ubifs_node_insert_hmac(9)insert a HMAC into a UBIFS node✨
• __ubifs_node_verify_hmac(9)verify the HMAC of UBIFS node✨
• __udma_alloc_gp_rflow_range(9)alloc range of GP RX flows✨
• __ufshcd_send_uic_cmd(9)Send UIC commands and retrieve the result✨
• __ufshcd_transfer_req_compl(9)handle SCSI and query command completion✨
• __ufshcd_tx_eqtr(9)TX Equalization Training (EQTR) procedure✨
• __uio_register_device(9)register a new userspace IO device✨
• __ulpi_register_driver(9)register a driver with the ULPI bus✨
• __unflatten_device_tree(9)create tree of device_nodes from flat blob✨
• __uniphier_cache_maint_common(9)run a queue operation for a particular level✨
• __uniphier_cache_sync(9)perform a sync point for a particular cache level✨
• __unmap_stage2_range(9)- Clear stage2 page table entries to unmap a range✨
• __unregister_chrdev(9)unregister and destroy a cdev✨
• __update_default_selected(9)update a port's Selected variable from Partner✨
• __update_lacpdu_from_port(9)update a port's lacpdu fields✨
• __update_ntt(9)update a port's ntt variable from a received lacpdu✨
• __update_selected(9)update a port's Selected variable from a received lacpdu✨
• __usb_serial_register_drivers(9)register drivers for a usb-serial module✨
• __usecs_to_jiffies(9)- convert microseconds to jiffies✨
• __usermodehelper_disable(9)Prevent new helpers from being started.✨
• __usermodehelper_set_disable_depth(9)Modify usermodehelper_disabled.✨
• __v4l2_ctrl_grab(9)Unlocked variant of v4l2_ctrl_grab.✨
• __v4l2_ctrl_handler_setup(9)Call the s_ctrl op for all controls belonging to the handler to initialize the hardware to the current control values. The caller is responsible for acquiring the control handler mutex on behalf of…✨
• __v4l2_ctrl_modify_dimensions(9)Unlocked variant of v4l2_ctrl_modify_dimensions()✨