📦 linux-manual

82568 pages · page 326 of 413

S (continued)

struct iwl_context_info_early_dbg_cfg(9)early debug configuration for dumping DRAM addresses✨
struct iwl_context_info_hcmd_cfg(9)command queue configuration✨
struct iwl_context_info_pnvm_cfg(9)platform NVM data configuration✨
struct iwl_context_info_rbd_cfg(9)RBDs configuration✨
struct iwl_context_info_v2(9)device INIT configuration✨
struct iwl_context_info_version(9)version structure✨
struct iwl_ctdp_cmd(9)track and manage the FW power consumption budget✨
struct iwl_d3_manager_config(9)D3 manager configuration command✨
struct iwl_dbg_dump_complete_cmd(9)dump complete cmd✨
struct iwl_dbg_host_event_cfg_cmd(9)host event config command✨
struct iwl_dbg_mem_access_cmd(9)Request the device to read/write memory✨
struct iwl_dbg_mem_access_rsp(9)Response to debug mem commands✨
struct iwl_dbg_suspend_resume_cmd(9)dbgc suspend resume command✨
struct iwl_dbg_tlv_node(9)debug TLV node✨
struct iwl_dbg_tlv_time_point_data(9)debug time point data✨
struct iwl_dbg_tlv_timer_node(9)timer node struct✨
struct iwl_dbg_tlv_ver_data(9)debug TLV version struct✨
struct iwl_dbgc1_info(9)DBGC1 address and size✨
struct iwl_dev_tx_power_cmd_v10(9)TX power reduction cmd✨
struct iwl_dev_tx_power_cmd_v3(9)TX power reduction command version 3✨
struct iwl_dev_tx_power_cmd_v3_v8(9)TX power reduction command (multiversion)✨
struct iwl_dev_tx_power_cmd_v4(9)TX power reduction command version 4✨
struct iwl_dev_tx_power_cmd_v5(9)TX power reduction command version 5✨
struct iwl_dev_tx_power_cmd_v8(9)TX power reduction command version 8✨
struct iwl_dev_tx_power_cmd_v9(9)TX power reduction cmd✨
struct iwl_dev_tx_power_common(9)Common part of the TX power reduction cmd✨
struct iwl_device_cmd(9)device command structure✨
struct iwl_device_power_cmd(9)device wide power command. DEVICE_POWER_CMD = 0x77 (command, has simple generic response)✨
struct iwl_device_tx_cmd(9)buffer for TX command✨
struct iwl_dhc_cmd(9)debug host command✨
struct iwl_dhc_cmd_resp(9)debug host command response✨
struct iwl_dhc_cmd_resp_v1(9)debug host command response✨
struct iwl_dhc_payload_hdr(9)DHC payload header✨
struct iwl_dhc_tas_status_per_radio(9)TAS status per radio✨
struct iwl_dhc_tas_status_resp(9)Response to DHC_TOOLS_UMAC_GET_TAS_STATUS✨
struct iwl_dhc_tlc_cmd(9)fixed debug config✨
struct iwl_dhc_twt_operation(9)trigger a TWT operation✨
struct iwl_dram_data(9)DRAM data descriptor✨
struct iwl_dram_info(9)DRAM fragments allocation struct✨
struct iwl_dram_regions(9)DRAM regions container structure✨
struct iwl_drv(9)drv common data✨
struct iwl_dts_measurement_cmd(9)request DTS temp and/or voltage measurements✨
struct iwl_dts_measurement_notif(9)measurements notification✨
struct iwl_dts_measurement_notif_v1(9)measurements notification✨
struct iwl_dts_measurement_resp(9)measurements response✨
struct iwl_dump_file_name_info(9)data for dump file name addition✨
struct iwl_dump_ini_mem_ops(9)ini memory dump operations✨
struct iwl_dump_ini_region_data(9)region data✨
struct iwl_dump_sanitize_ops(9)dump sanitization operations✨
struct iwl_dvm_bt_params(9)DVM specific BT (coex) parameters✨
struct iwl_dvm_cfg(9)DVM firmware specific device configuration✨
struct iwl_eeprom_channel(9)EEPROM channel data✨
struct iwl_eeprom_enhanced_txpwr(9)enhanced regulatory TX power limits✨
struct iwl_error_resp(9)FW error indication ( REPLY_ERROR = 0x2 )✨
struct iwl_esr_mode_notif(9)FW recommendation/force for EMLSR mode✨
struct iwl_esr_mode_notif_v1(9)FW recommendation/force for EMLSR mode✨
struct iwl_esr_trans_fail_notif(9)FW reports a failure in EMLSR transition✨
struct iwl_ext_dts_measurement_cmd(9)request extended DTS temp measurements✨
struct iwl_extended_beacon_notif(9)notifies about beacon transmission✨
struct iwl_extended_beacon_notif_v5(9)notifies about beacon transmission✨
struct iwl_family_base_params(9)base parameters for an entire family✨
struct iwl_flush_queue_info(9)virtual flush queue info✨
struct iwl_ftm_responder_stats(9)FTM responder statistics✨
struct iwl_fw(9)variables associated with the firmware✨
struct iwl_fw_cmd_bios_table(9)firmware command BIOS revision entry✨
struct iwl_fw_cmd_version(9)firmware command version entry✨
struct iwl_fw_dbg(9)debug data✨
struct iwl_fw_dbg_conf_tlv(9)a TLV that describes a debug configuration.✨
struct iwl_fw_dbg_config_cmd(9)configure FW debug✨
struct iwl_fw_dbg_dest_tlv_v1(9)configures the destination of the debug data✨
struct iwl_fw_dbg_mem_seg_tlv(9)configures the debug data memory segments✨
struct iwl_fw_dbg_params(9)register values to restore✨
struct iwl_fw_dbg_reg_op(9)an operation on a register✨
struct iwl_fw_dbg_trigger_ba(9)configures BlockAck related trigger✨
struct iwl_fw_dbg_trigger_cmd(9)configures trigger for messages from FW.✨
struct iwl_fw_dbg_trigger_low_rssi(9)trigger for low beacon RSSI✨
struct iwl_fw_dbg_trigger_missed_bcon(9)configures trigger for missed beacons✨
struct iwl_fw_dbg_trigger_mlme(9)configures trigger for mlme events✨
struct iwl_fw_dbg_trigger_stats(9)configures trigger for statistics✨
struct iwl_fw_dbg_trigger_tdls(9)configures trigger for TDLS events.✨
struct iwl_fw_dbg_trigger_time_event(9)configures a time event trigger✨
struct iwl_fw_dbg_trigger_tlv(9)a TLV that describes the trigger✨
struct iwl_fw_dbg_trigger_tx_status(9)configures trigger for tx response status.✨
struct iwl_fw_dbg_trigger_txq_timer(9)configures the Tx queue's timer✨
struct iwl_fw_dump_desc(9)describes the dump✨
struct iwl_fw_dump_ptrs(9)set of pointers needed for the fw-error-dump✨
struct iwl_fw_error_dump_data(9)data for one type✨
struct iwl_fw_error_dump_fifo(9)RX/TX FIFO data✨
struct iwl_fw_error_dump_file(9)the layout of the header of the file✨
struct iwl_fw_error_dump_fw_mon(9)FW monitor data✨
struct iwl_fw_error_dump_info(9)info on the device / firmware✨
struct iwl_fw_error_dump_mem(9)chunk of memory✨
struct iwl_fw_error_dump_mode(9)error dump mode for callback✨
struct iwl_fw_error_dump_paging(9)content of the UMAC's image page block on DRAM✨
struct iwl_fw_error_dump_prph(9)periphery registers data✨
struct iwl_fw_error_dump_rb(9)content of an Receive Buffer✨
struct iwl_fw_error_dump_smem_cfg(9)Dump SMEM configuration This must follow &struct iwl_fwrt_shared_mem_cfg.✨
struct iwl_fw_error_dump_trigger_desc(9)describes the trigger condition✨
struct iwl_fw_error_dump_txcmd(9)TX command data✨
struct iwl_fw_error_recovery_cmd(9)recovery cmd sent upon assert✨
struct iwl_fw_ini_addr_size(9)Base address and size that defines a chunk of memory✨
struct iwl_fw_ini_addr_val(9)Address and value to set it to✨
struct iwl_fw_ini_allocation_tlv(9)Allocates DRAM buffers✨
struct iwl_fw_ini_conf_set_tlv(9)configuration TLV to set register/memory.✨
struct iwl_fw_ini_debug_info_tlv(9)debug info TLV✨
struct iwl_fw_ini_dump_cfg_name(9)configuration name✨
struct iwl_fw_ini_dump_file_hdr(9)header of dump file✨
struct iwl_fw_ini_err_table_dump(9)ini error table dump✨
struct iwl_fw_ini_error_dump(9)ini region dump✨
struct iwl_fw_ini_error_dump_data(9)data for one type✨
struct iwl_fw_ini_error_dump_header(9)ini region dump header✨
struct iwl_fw_ini_error_dump_range(9)range of memory✨
struct iwl_fw_ini_error_dump_register(9)ini register dump✨
struct iwl_fw_ini_fifo_hdr(9)fifo range header✨
struct iwl_fw_ini_hcmd(9)debug configuration host command✨
struct iwl_fw_ini_hcmd_tlv(9)Generic Host command pass through TLV✨
struct iwl_fw_ini_header(9)Common Header for all ini debug TLV's structures✨
struct iwl_fw_ini_monitor_dump(9)ini monitor dump✨
struct iwl_fw_ini_region_dev_addr(9)Configuration to read device addresses✨
struct iwl_fw_ini_region_dev_addr_range(9)Configuration to read device address range✨
struct iwl_fw_ini_region_err_table(9)error table region data✨
struct iwl_fw_ini_region_fifos(9)Configuration to read Tx/Rx fifos✨
struct iwl_fw_ini_region_internal_buffer(9)internal buffer region data✨
struct iwl_fw_ini_region_special_device_memory(9)special device memory✨
struct iwl_fw_ini_region_tlv(9)region TLV✨
struct iwl_fw_ini_special_device_memory(9)special device memory✨
struct iwl_fw_ini_trigger_tlv(9)trigger TLV✨
struct iwl_fw_mon(9)fw monitor per allocation id✨
struct iwl_fw_mon_reg(9)FW monitor register info✨
struct iwl_fw_mon_regs(9)FW monitor registers✨
struct iwl_fw_paging(9)FW paging descriptor✨
struct iwl_fw_paging_cmd(9)paging layout✨
struct iwl_fw_runtime(9)runtime data for firmware✨
struct iwl_fwrt_dump_data(9)dump data✨
struct iwl_fwrt_wk_data(9)dump worker data struct✨
struct iwl_geo_tx_power_profiles_cmd_v1(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_cmd_v2(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_cmd_v3(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_cmd_v4(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_cmd_v5(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_cmd_v6(9)struct for PER_CHAIN_LIMIT_OFFSET_CMD cmd.✨
struct iwl_geo_tx_power_profiles_resp(9)response to PER_CHAIN_LIMIT_OFFSET_CMD cmd✨
struct iwl_he_backoff_conf(9)used for backoff configuration Per each trigger-based AC, (set by MU EDCA Parameter set info-element) used for backoff configuration of TXF5..TXF8 trigger based. The MU-TIMER is reloaded w/ MU_TIME…✨
struct iwl_he_monitor_cmd(9)configure air sniffer for HE✨
struct iwl_he_pkt_ext_v1(9)QAM thresholds The required PPE is set via HE Capabilities IE, per Nss x BW x MCS The IE is organized in the following way: Support for Nss x BW (or RU) matrix: (0=SISO, 1=MIMO2) x (0-20MHz…✨
struct iwl_he_pkt_ext_v2(9)QAM thresholds The required PPE is set via HE Capabilities IE, per Nss x BW x MCS The IE is organized in the following way: Support for Nss x BW (or RU) matrix: (0=SISO, 1=MIMO2) x (0-20MHz…✨
struct iwl_he_sta_context_cmd_v1(9)configure FW to work with HE AP✨
struct iwl_he_sta_context_cmd_v2(9)configure FW to work with HE AP✨
struct iwl_he_sta_context_cmd_v3(9)configure FW to work with HE AP✨
struct iwl_host_cmd(9)Host command to the uCode✨
struct iwl_ht_agg(9)aggregation state machine✨
struct iwl_hw_params(9)HW parameters✨
struct iwl_imr_data(9)imr dram data used during debug process✨
struct iwl_init_extended_cfg_cmd(9)mark what commands ucode should wait for before finishing init flows✨
struct iwl_lari_config_change_cmd(9)change LARI configuration✨
struct iwl_lari_config_change_cmd_v1(9)change LARI configuration✨
struct iwl_lari_config_change_cmd_v6(9)change LARI configuration✨
struct iwl_lari_config_change_cmd_v8(9)change LARI configuration✨
struct iwl_lari_config_extension_cmd(9)extend LARI configuration✨
struct iwl_led_cmd(9)LED switching command✨
struct iwl_link_config_cmd(9)command structure to configure the LINK context in MLD API ( LINK_CONFIG_CMD =0x9 )✨
struct iwl_lmac_scan_complete_notif(9)notifies end of scanning (all channels) SCAN_COMPLETE_NTF_API_S_VER_3✨
struct iwl_lq_cmd(9)link quality command✨
struct iwl_lq_sta_rs_fw(9)rate and related statistics for RS in FW✨
struct iwl_ltr_config_cmd(9)configures the LTR✨
struct iwl_ltr_config_cmd_v1(9)configures the LTR✨
struct iwl_mac_beacon_cmd(9)beacon template command with offloaded CSA✨
struct iwl_mac_beacon_cmd_v6(9)beacon template command✨
struct iwl_mac_beacon_cmd_v7(9)beacon template command with offloaded CSA✨
struct iwl_mac_cfg(9)information about the MAC-specific device part✨
struct iwl_mac_client_data(9)configuration data for client MAC context✨
struct iwl_mac_config_cmd(9)command structure to configure MAC contexts in MLD API for versions 4 ( MAC_CONTEXT_CONFIG_CMD = 0x8 )✨
struct iwl_mac_config_cmd_v3(9)command structure to configure MAC contexts in MLD API for versions 2 and 3 ( MAC_CONTEXT_CONFIG_CMD = 0x8 )✨
struct iwl_mac_ctx_cmd(9)command structure to configure MAC contexts ( MAC_CONTEXT_CMD = 0x28 )✨
struct iwl_mac_data_ap(9)configuration data for AP MAC context✨
struct iwl_mac_data_go(9)configuration data for P2P GO MAC context✨
struct iwl_mac_data_ibss(9)configuration data for IBSS MAC context✨
struct iwl_mac_data_p2p_sta(9)configuration data for P2P client MAC context✨
struct iwl_mac_data_pibss(9)Pseudo IBSS config data✨
struct iwl_mac_data_sta(9)configuration data for station MAC context✨
struct iwl_mac_low_latency_cmd(9)set/clear mac to 'low-latency mode'✨
struct iwl_mac_nan_data(9)NAN specific MAC data✨
struct iwl_mac_p2p_dev_data(9)configuration data for P2P device MAC context✨
struct iwl_mac_power_cmd(9)power command MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)✨
struct iwl_mac_power_cmd_v2(9)power command V2 containing uAPSD support MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)✨
struct iwl_mac_wifi_gen_support(9)parameters of iwl_mac_config_cmd with support up to uhr as in version 3 of the command ( MAC_CONTEXT_CONFIG_CMD = 0x8 )✨
struct iwl_mac_wifi_gen_support_v2(9)parameters of iwl_mac_config_cmd with support up to eht as in version 2 of the command✨
struct iwl_marker(9)mark info into the usniffer logs✨
struct iwl_marker_rsp(9)Response to marker cmd✨
struct iwl_mcast_filter_cmd(9)configure multicast filter.✨
struct iwl_mcc_allowed_ap_type_cmd(9)struct for MCC_ALLOWED_AP_TYPE_CMD✨
struct iwl_mcc_allowed_ap_type_cmd_v1(9)struct for MCC_ALLOWED_AP_TYPE_CMD✨
struct iwl_mcc_chub_notif(9)chub notifies of mcc change (MCC_CHUB_UPDATE_CMD = 0xc9) The Chub (Communication Hub, CommsHUB) is a HW component that connects to the cellular and connectivity cores that gets updates of the mcc…✨
struct iwl_mcc_update_cmd(9)Request the device to update geographic regulatory profile according to the given MCC (Mobile Country Code). The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. 'ZZ' MCC…✨
struct iwl_mcc_update_resp_v3(9)response to MCC_UPDATE_CMD. Contains the new channel control profile map, if changed, and the new MCC (mobile country code). The new MCC may be different than what was requested in MCC_UPDATE_CMD.✨
struct iwl_mcc_update_resp_v4(9)response to MCC_UPDATE_CMD. Contains the new channel control profile map, if changed, and the new MCC (mobile country code). The new MCC may be different than what was requested in MCC_UPDATE_CMD.✨
struct iwl_mcc_update_resp_v8(9)response to MCC_UPDATE_CMD. Contains the new channel control profile map, if changed, and the new MCC (mobile country code). The new MCC may be different than what was requested in MCC_UPDATE_CMD.✨
struct iwl_mei(9)holds the private date for iwl_mei✨
struct iwl_mei_cache(9)cache for the parameters from iwlwifi✨
struct iwl_mei_colloc_info(9)collocated AP info✨