📦 linux-manual

82568 pages · page 268 of 413

R (continued)

regmap_sccb_read(9)Read data from SCCB slave device✨
regmap_sccb_write(9)Write data to SCCB slave device✨
regmap_test_bits(9)Check if all specified bits are set in a register.✨
regmap_update_bits_base(9)Perform a read/modify/write cycle on a register✨
regmap_write(9)Write a value to a single register✨
regmap_write_async(9)Write a value to a single register asynchronously✨
regs_get_kernel_argument(9)get Nth function argument in kernel✨
regs_get_kernel_stack_nth(9)get Nth entry of the stack✨
regs_get_kernel_stack_nth_addr(9)get the address of the Nth entry on stack✨
regs_get_register(9)get register value from its offset✨
regs_query_register_name(9)query register name from its offset✨
regs_query_register_offset(9)query register offset from its name✨
regs_within_kernel_stack(9)check the address in the stack✨
regulator_allow_bypass(9)allow the regulator to go into bypass mode✨
regulator_bulk_disable(9)disable multiple regulator consumers✨
regulator_bulk_enable(9)enable multiple regulator consumers✨
regulator_bulk_force_disable(9)force disable multiple regulator consumers✨
regulator_bulk_free(9)free multiple regulator consumers✨
regulator_bulk_get(9)get multiple regulator consumers✨
regulator_bulk_register_supply_alias(9)register multiple aliases✨
regulator_bulk_set_supply_names(9)initialize the 'supply' fields in an array of regulator_bulk_data structs✨
regulator_bulk_unregister_supply_alias(9)unregister multiple aliases✨
regulator_count_voltages(9)count regulator_list_voltage() selectors✨
regulator_desc_list_voltage_linear(9)List voltages with simple calculation✨
regulator_desc_list_voltage_linear_range(9)List voltages for linear ranges✨
regulator_dev_lookup(9)lookup a regulator device.✨
regulator_disable(9)disable regulator output✨
regulator_disable_deferred(9)disable regulator output with delay✨
regulator_disable_regmap(9)standard disable() for regmap users✨
regulator_ena_gpio_ctrl(9)balance enable_count of each GPIO and actual GPIO pin control✨
regulator_enable(9)enable regulator output✨
regulator_enable_regmap(9)standard enable() for regmap users✨
regulator_event_forward_notifier(9)notifier callback for supply events✨
regulator_event_work_fn(9)process a deferred regulator event✨
regulator_find_closest_bigger(9)helper to find offset in ramp delay table✨
regulator_force_disable(9)force disable regulator output✨
regulator_free_power_budget(9)free power budget on a regulator✨
regulator_get(9)lookup and obtain a reference to a regulator.✨
regulator_get_bypass_regmap(9)Default get_bypass() using regmap✨
regulator_get_current_limit(9)get regulator output current✨
regulator_get_current_limit_regmap(9)get_current_limit for regmap users✨
regulator_get_drvdata(9)get regulator driver data✨
regulator_get_error_flags(9)get regulator error information✨
regulator_get_exclusive(9)obtain exclusive access to a regulator.✨
regulator_get_hardware_vsel_register(9)get the HW voltage selector register✨
regulator_get_linear_step(9)return the voltage step size between VSEL values✨
regulator_get_mode(9)get regulator operating mode✨
regulator_get_optional(9)obtain optional access to a regulator.✨
regulator_get_regmap(9)get the regulator's register map✨
regulator_get_unclaimed_power_budget(9)get regulator unclaimed power budget✨
regulator_get_voltage(9)get regulator output voltage✨
regulator_get_voltage_sel_pickable_regmap(9)pickable range get_voltage_sel✨
regulator_get_voltage_sel_regmap(9)standard get_voltage_sel for regmap users✨
regulator_handle_critical(9)Handle events for system-critical regulators.✨
regulator_hardware_enable(9)access the HW for enable/disable regulator✨
regulator_has_full_constraints(9)the system has fully specified constraints✨
regulator_irq_helper(9)register IRQ based regulator event/error notifier✨
regulator_irq_helper_cancel(9)drop IRQ based regulator event/error notifier✨
regulator_irq_map_event_simple(9)regulator IRQ notification for trivial IRQs✨
regulator_is_enabled(9)is the regulator output enabled✨
regulator_is_enabled_regmap(9)standard is_enabled() for regmap users✨
regulator_is_equal(9)test whether two regulators are the same✨
regulator_is_supported_voltage(9)check if a voltage range can be supported✨
regulator_list_hardware_vsel(9)get the HW-specific register value for a selector✨
regulator_list_voltage(9)enumerate supported voltages✨
regulator_list_voltage_linear(9)List voltages with simple calculation✨
regulator_list_voltage_linear_range(9)List voltages for linear ranges✨
regulator_list_voltage_pickable_linear_range(9)pickable range list voltages✨
regulator_list_voltage_table(9)List voltages with table based mapping✨
regulator_lock(9)lock a single regulator✨
regulator_lock_dependent(9)lock regulator's suppliers and coupled regulators✨
regulator_lock_nested(9)lock a single regulator✨
regulator_lock_two(9)lock two regulators✨
regulator_map_voltage_ascend(9)map_voltage() for ascendant voltage list✨
regulator_map_voltage_iterate(9)map_voltage() based on list_voltage()✨
regulator_map_voltage_linear(9)map_voltage() for simple linear mappings✨
regulator_map_voltage_linear_range(9)map_voltage() for multiple linear ranges✨
regulator_map_voltage_pickable_linear_range(9)map_voltage, pickable ranges✨
regulator_mode_to_status(9)convert a regulator mode into a status✨
regulator_notifier_call_chain(9)call regulator event notifier✨
regulator_put(9)"free" the regulator source✨
regulator_register(9)register regulator✨
regulator_register_always_on(9)register an always-on regulator with a fixed name✨
regulator_register_notifier(9)register regulator event notifier✨
regulator_register_supply_alias(9)Provide device alias for supply lookup✨
regulator_request_power_budget(9)request power budget on a regulator✨
regulator_set_active_discharge_regmap(9)Default set_active_discharge() using regmap✨
regulator_set_bypass_regmap(9)Default set_bypass() using regmap✨
regulator_set_current_limit(9)set regulator output current limit✨
regulator_set_current_limit_regmap(9)set_current_limit for regmap users✨
regulator_set_drvdata(9)set regulator driver data✨
regulator_set_load(9)set regulator load✨
regulator_set_mode(9)set regulator operating mode✨
regulator_set_pull_down_regmap(9)Default set_pull_down() using regmap✨
regulator_set_ramp_delay_regmap(9)set_ramp_delay() helper✨
regulator_set_soft_start_regmap(9)Default set_soft_start() using regmap✨
regulator_set_voltage(9)set regulator output voltage✨
regulator_set_voltage_sel_pickable_regmap(9)pickable range set_voltage_sel✨
regulator_set_voltage_sel_regmap(9)standard set_voltage_sel for regmap users✨
regulator_set_voltage_time(9)get raise/fall time✨
regulator_set_voltage_time_sel(9)get raise/fall time✨
regulator_suspend(9)prepare regulators for system wide suspend✨
regulator_sync_voltage(9)re-apply last regulator output voltage✨
regulator_unlock(9)unlock a single regulator✨
regulator_unlock_dependent(9)unlock regulator's suppliers and coupled regulators✨
regulator_unlock_two(9)unlock two regulators✨
regulator_unregister(9)unregister regulator✨
regulator_unregister_notifier(9)unregister regulator event notifier✨
regulator_unregister_supply_alias(9)Remove device alias✨
Regulatory enforcement infrastructure(9)✨
regulatory_hint(9)driver hint to the wireless core a regulatory domain✨
regulatory_hint_country_ie(9)hints a country IE as a regulatory domain✨
regulatory_hint_disconnect(9)informs all devices have been disconnected✨
regulatory_hint_found_beacon(9)hints a beacon was found on a channel✨
regulatory_hint_indoor(9)hint operation in indoor env. or not✨
regulatory_indoor_allowed(9)is indoor operation allowed✨
regulatory_netlink_notify(9)notify on released netlink socket✨
regulatory_pre_cac_allowed(9)check if pre-CAC allowed in the current regdom✨
regulatory_propagate_dfs_state(9)Propagate DFS channel state to other wiphys✨
regulatory_set_wiphy_regd(9)set regdom info for self managed drivers✨
regulatory_set_wiphy_regd_sync(9)set regdom for self-managed drivers✨
reinit_completion(9)reinitialize a completion structure✨
Relay Error Codes(9)✨
Relay Message(9)✨
relay_alloc_buf(9)allocate a channel buffer✨
relay_buf_empty(9)boolean, is the channel buffer empty?✨
relay_buf_full(9)boolean, is the channel buffer full?✨
relay_close(9)close the channel✨
relay_close_buf(9)close a channel buffer✨
relay_create_buf(9)allocate and initialize a channel buffer✨
relay_destroy_buf(9)destroy an rchan_buf struct and associated buffer✨
relay_destroy_channel(9)free the channel struct✨
relay_file_mmap_prepare(9)mmap file op for relay files✨
relay_file_open(9)open file op for relay files✨
relay_file_poll(9)poll file op for relay files✨
relay_file_read_end_pos(9)return the new read position✨
relay_file_read_start_pos(9)find the first available byte to read✨
relay_file_read_subbuf_avail(9)return bytes available in sub-buffer✨
relay_file_release(9)release file op for relay files✨
relay_flush(9)close the channel✨
relay_mmap_prepare_buf(9)- mmap channel buffer to process address space✨
relay_open(9)create a new relay channel✨
relay_remove_buf(9)remove a channel buffer✨
relay_reserve(9)reserve slot in channel buffer✨
relay_reset(9)reset the channel✨
relay_stats(9)get channel buffer statistics✨
relay_subbufs_consumed(9)update the buffer's sub-buffers-consumed count✨
relay_switch_subbuf(9)switch to a new sub-buffer✨
relay_write(9)write data into the channel✨
release_allocated_lock(9)Release the PBN lock and/or the reference on the allocated block at the end of processing a data_vio.✨
release_attributes_data(9)Clean-up all sysfs directories and files created✨
release_compressed_write_waiter(9)Update a data_vio for which a successful compressed write has completed and send it on its way.✨
release_data_vio_allocation_lock(9)Release the PBN lock on a data_vio's allocated block.✨
release_dma_bufs(9)Release the DMA buffer for transferring firmware fragments✨
release_event_pool(9)Frees memory of an event pool of a host✨
release_existing_page_budget(9)release budget of an existing page.✨
release_firmware(9)release the resource associated with a firmware image✨
release_flush(9)Release a vdo_flush structure that has completed its work.✨
release_head(9)release a journal head.✨
release_io_space(9)release IO ports allocated with alloc_io_space()✨
release_irq_context(9)Release reply processing✨
release_journal_block_reference(9)Release a reference to a journal block.✨
release_journal_locks(9)Callback invoked after a slab summary update completes.✨
release_logical_lock(9)Release the logical block lock and flush generation lock at the end of processing a data_vio.✨
release_mem_region_adjustable(9)release a previously reserved memory region✨
release_new_page_budget(9)release budget of a new page.✨
release_one_tty(9)release tty structure memory✨
release_pages(9)batched put_page()✨
release_pbn_lock_provisional_reference(9)If the lock is responsible for a provisional reference, release that reference.✨
release_pcie_device(9)free PCI Express port service device structure✨
release_recovery_journal_lock(9)Request the slab journal to release the recovery journal lock it may hold on a specified recovery journal block.✨
release_resource(9)release a previously reserved resource✨
release_rx_pools(9)Release any rx pools attached to @adapter.✨
release_tty(9)release tty structure memory✨
release_tx_pools(9)Release any tx pools attached to @adapter.✨
release_update_locks_for_kvm(9)Release the locks used to dynamically update a KVM guest's APCB in the proper order.✨
release_update_locks_for_mdev(9)Release the locks used to dynamically update a KVM guest's APCB in the proper order.✨
reload_store(9)Store function for "reload" sysfs attribute✨
reloc_handler(9)Apply a particular relocation to a module✨
remap_data16_to_data32(9)remap u16 @old table to a u32 based table✨
remap_dfa_accept(9)remap old dfa accept table to be an index✨
remap_io_mapping(9)remap an IO mapping to userspace✨
remap_io_sg(9)remap an IO mapping to userspace✨
remap_pfn_range(9)remap kernel memory to userspace✨
remap_vmalloc_range(9)map vmalloc pages to userspace✨
remap_vmalloc_range_partial(9)map vmalloc pages to userspace✨
remove_binfmt_handler(9)remove a binary type handler✨
remove_board(9)Turns off slot and LEDs✨
remove_buds(9)remove used buds.✨
remove_comment(9)Truncate all chars following START_COMMENT in a string.✨
remove_eq(9)remove Event Queue✨
remove_from_bin(9)Get the next data_vio whose compression has not been canceled from a bin.✨
remove_from_lpt_heap(9)remove LEB properties from a LEB category heap.✨
remove_iaa_compression_mode(9)Remove an IAA compression mode✨
remove_id_store(9)remove a PCI device ID from this driver✨
remove_ima_buffer(9)remove the IMA buffer property and reservation from @fdt✨
remove_ino(9)remove an entry from the size tree.✨
remove_mac_addr(9)remove mac address from network device✨
remove_mapping(9)Attempt to remove a folio from its mapping.✨
remove_out_of_bounds_entries(9)Unmap entries which outside the logical space.✨