📦 linux-manual

82568 pages · page 216 of 413

M (continued)

mpt_do_ioc_recovery(9)Initialize or recover MPT adapter.✨
mpt_do_upload(9)Construct and Send FWUpload request to MPT adapter port.✨
mpt_downloadboot(9)DownloadBoot code✨
mpt_event_deregister(9)Deregister protocol-specific event callback handler✨
mpt_event_register(9)Register protocol-specific event callback handler.✨
mpt_fault_reset_work(9)work performed on workq after ioc fault✨
mpt_fc_log_info(9)Log information returned from Fibre Channel IOC.✨
mpt_findImVolumes(9)Identify IDs of hidden disks and RAID Volumes✨
mpt_free_fw_memory(9)free firmware memory✨
mpt_free_msg_frame(9)Place MPT request frame back on FreeQ.✨
mpt_get_cb_idx(9)obtain cb_idx for registered driver✨
mpt_get_msg_frame(9)Obtain an MPT request frame from the pool✨
mpt_get_product_name(9)returns product string✨
mpt_GetIocState(9)Get the current state of a MPT adapter.✨
mpt_GetScsiPortSettings(9)read SCSI Port Page 0 and 2✨
mpt_halt_firmware(9)Halts the firmware if it is operational and panic the kernel✨
mpt_handshake_req_reply_wait(9)Send MPT request to and receive reply from IOC via doorbell handshake method.✨
mpt_HardResetHandler(9)Generic reset handler✨
mpt_host_page_access_control(9)control the IOC's Host Page Buffer access✨
mpt_host_page_alloc(9)allocate system memory for the fw✨
mpt_inactive_raid_list_free(9)This clears this link list.✨
mpt_inactive_raid_volumes(9)sets up link list of phy_disk_nums for devices belonging in an inactive volume✨
mpt_interrupt(9)MPT adapter (IOC) specific interrupt handler.✨
mpt_ioc_reset(9)Base cleanup for hard reset✨
mpt_iocstatus_info(9)IOCSTATUS information returned from IOC.✨
mpt_iocstatus_info_config(9)IOCSTATUS information for config pages✨
mpt_is_discovery_complete(9)determine if discovery has completed✨
mpt_mapresources(9)map in memory mapped io✨
mpt_print_ioc_summary(9)Write ASCII summary of IOC to a buffer.✨
mpt_put_msg_frame(9)Send a protocol-specific MPT request frame to an IOC✨
mpt_put_msg_frame_hi_pri(9)Send a hi-pri protocol-specific MPT request frame✨
mpt_raid_phys_disk_get_num_paths(9)returns number paths associated to this phys_num✨
mpt_raid_phys_disk_pg0(9)returns phys disk page zero✨
mpt_raid_phys_disk_pg1(9)returns phys disk page 1✨
mpt_readScsiDevicePageHeaders(9)save version and length of SDP1✨
mpt_register(9)Register protocol-specific main callback handler.✨
mpt_remove_dead_ioc_func(9)kthread context to remove dead ioc✨
mpt_reset_deregister(9)Deregister protocol-specific IOC reset handler.✨
mpt_reset_register(9)Register protocol-specific IOC reset handler.✨
mpt_resume(9)Fusion MPT base driver resume routine.✨
mpt_sas_log_info(9)Log information returned from SAS IOC.✨
mpt_send_handshake_request(9)Send MPT request via doorbell handshake method.✨
mpt_set_taskmgmt_in_progress_flag(9)set flags associated with task management✨
mpt_Soft_Hard_ResetHandler(9)Try less expensive reset✨
mpt_SoftResetHandler(9)Issues a less expensive reset✨
mpt_spi_log_info(9)Log information returned from SCSI Parallel IOC.✨
mpt_suspend(9)Fusion MPT base driver suspend routine.✨
mpt_verify_adapter(9)Given IOC identifier, set pointer to its adapter structure.✨
mptbase_reply(9)MPT base driver's callback routine✨
mptbase_sas_persist_operation(9)Perform operation on SAS Persistent Table✨
mptcp_splice_read(9)splice data from MPTCP socket to a pipe✨
mptcp_token_accept(9)replace a req sk with full sock in token hash✨
mptcp_token_destroy(9)remove mptcp connection/token✨
mptcp_token_destroy_request(9)remove mptcp connection/token✨
mptcp_token_get_sock(9)retrieve mptcp connection sock using its token✨
mptcp_token_iter_next(9)iterate over the token container from given pos✨
mptcp_token_new_connect(9)create new key/idsn/token for subflow✨
mptcp_token_new_request(9)create new key/idsn/token for subflow_request✨
mptctl_syscall_down(9)Down the MPT adapter syscall semaphore.✨
MptDisplayIocCapabilities(9)Disply IOC's capabilities.✨
mptfc_exit(9)Unregisters MPT adapter(s)✨
mptfc_init(9)Register MPT adapter(s) as SCSI host(s) with SCSI mid- layer.✨
mptfc_remove(9)Remove fc infrastructure for devices✨
mptsas_add_device_component(9)adds a new device component to our lists✨
mptsas_add_device_component_by_fw(9)adds a new device component by FW ID✨
mptsas_add_device_component_starget(9)adds a SCSI target device component✨
mptsas_add_device_component_starget_ir(9)Handle Integrated RAID, adding each individual device to list✨
mptsas_add_end_device(9)report a new end device to sas transport layer✨
mptsas_broadcast_primitive_work(9)Handle broadcast primitives✨
mptsas_del_device_component_by_os(9)Once a device has been removed, we mark the entry in the list as being cached✨
mptsas_del_device_components(9)Cleaning the list✨
mptsas_del_end_device(9)report a deleted end device to sas transport layer✨
mptsas_delete_expander_siblings(9)remove siblings attached to expander✨
mptsas_eh_timed_out(9)resets the scsi_cmnd timeout if the device under question is currently in the device removal delay.✨
mptsas_exp_repmanufacture_info(9)sets expander manufacturer info✨
mptsas_expander_add(9)adds a newly discovered expander✨
mptsas_expander_delete(9)remove this expander✨
mptsas_find_phyinfo_by_phys_disk_num(9)find phyinfo for the specified @phys_disk_num✨
mptsas_find_portinfo_by_sas_address(9)find and return portinfo for this sas_address✨
mptsas_find_vtarget(9)find a virtual target device (FC LUN device or SCSI target device)✨
mptsas_firmware_event_work(9)work thread for processing fw events✨
mptsas_ioc_reset(9)issue an IOC reset for this reset phase✨
mptsas_issue_tm(9)send mptsas internal tm request✨
mptsas_probe_expanders(9)adding expanders✨
mptsas_scan_sas_topology(9)scans new SAS topology (part of probe or rescan)✨
mptsas_schedule_target_reset(9)send pending target reset✨
mptsas_send_expander_event(9)expanders events✨
mptsas_target_reset(9)Issues TARGET_RESET to end device using handshaking method✨
mptsas_target_reset_queue(9)queue a target reset✨
mptsas_taskmgmt_complete(9)complete SAS task management function✨
mptscsih_abort(9)Abort linux scsi_cmnd routine, new_eh variant✨
mptscsih_bus_reset(9)Perform a SCSI BUS_RESET! new_eh variant✨
mptscsih_dev_reset(9)Perform a SCSI LOGICAL_UNIT_RESET!✨
mptscsih_do_cmd(9)Do internal command.✨
mptscsih_get_completion_code(9)get completion code from MPT request✨
mptscsih_get_scsi_lookup(9)retrieves scmd entry✨
mptscsih_getclear_scsi_lookup(9)retrieves and clears scmd entry from ScsiLookup[] array list✨
mptscsih_host_reset(9)Perform a SCSI host adapter RESET (new_eh variant)✨
mptscsih_info(9)Return information about MPT adapter✨
mptscsih_info_scsiio(9)debug print info on reply frame✨
mptscsih_IssueTaskMgmt(9)Generic send Task Management function.✨
mptscsih_qcmd(9)Primary Fusion MPT SCSI initiator IO start routine.✨
mptscsih_set_scsi_lookup(9)write a scmd entry into the ScsiLookup[] array list✨
mptscsih_synchronize_cache(9)Send SYNCHRONIZE_CACHE to all disks.✨
mptscsih_taskmgmt_complete(9)Registered with Fusion MPT base driver✨
mptspi_exit(9)Unregisters MPT adapter(s)✨
mptspi_init(9)Register MPT adapter(s) as SCSI host(s) with SCSI mid- layer.✨
mptspi_initTarget(9)Target, LUN alloc/free functionality.✨
mptspi_is_raid(9)Determines whether target is belonging to volume✨
mptspi_print_read_nego(9)negotiation parameters debug info that is being read✨
mptspi_print_write_nego(9)negotiation parameters debug info that is being sent✨
mptspi_setTargetNegoParms(9)Update the target negotiation parameters✨
mptspi_writeIOCPage4(9)write IOC Page 4✨
mpu3050_drdy_trigger_set_state(9)set data ready interrupt state✨
mpu3050_read_mem(9)read MPU-3050 internal memory✨
MRAID_GET_DEVICE_MAP(9)device ids✨
mraid_mm_adapter_app_handle(9)return the application handle for this adapter✨
mraid_mm_alloc_kioc(9)Returns a uioc_t from free list✨
mraid_mm_attach_buf(9)Attach a free dma buffer for required size✨
mraid_mm_dealloc_kioc(9)Return kioc to free pool✨
mraid_mm_exit(9)Module exit point✨
mraid_mm_free_adp_resources(9)Free adapter softstate✨
mraid_mm_get_adapter(9)Returns corresponding adapters for the mimd packet✨
mraid_mm_init(9)Module entry point✨
mraid_mm_ioctl(9)module entry-point for ioctls✨
mraid_mm_open(9)open routine for char node interface✨
mraid_mm_register_adp(9)Registration routine for low level drivers✨
mraid_mm_setup_dma_pools(9)Set up dma buffer pools per adapter✨
mraid_mm_teardown_dma_pools(9)Free all per adapter dma buffers✨
mraid_mm_unregister_adp(9)Unregister routine for low level drivers✨
ms_sensors_convert_and_read(9)ADC conversion & read function✨
ms_sensors_crc_valid(9)CRC check function✨
ms_sensors_ht_read_humidity(9)Read humidity✨
ms_sensors_ht_read_temperature(9)Read temperature✨
ms_sensors_read_prom_word(9)PROM word read function✨
ms_sensors_read_serial(9)Serial number read function✨
ms_sensors_read_temp_and_pressure(9)read temp and pressure✨
ms_sensors_reset(9)Reset function✨
ms_sensors_show_battery_low(9)Show device battery low indicator✨
ms_sensors_show_heater(9)Show device heater✨
ms_sensors_tp_crc4(9)Calculate PROM CRC for Temperature and pressure devices. This function is only used when reading PROM coefficients✨
ms_sensors_tp_crc_valid_112(9)CRC check function for Temperature and pressure devices for 112bit PROM. This function is only used when reading PROM coefficients✨
ms_sensors_tp_crc_valid_128(9)CRC check function for Temperature and pressure devices for 128bit PROM. This function is only used when reading PROM coefficients✨
ms_sensors_tp_read_prom(9)prom coeff read function✨
ms_sensors_write_heater(9)Write device heater✨
ms_sensors_write_resolution(9)Set resolution function✨
msa311_get_axis(9)Read MSA311 accel data for certain IIO channel axis spec✨
msa311_get_odr(9)Read Output Data Rate (ODR) value from MSA311 accel✨
msa311_set_odr(9)Setup Output Data Rate (ODR) value for MSA311 accel✨
msa311_set_pwr_mode(9)Install certain MSA311 power mode✨
msa311_wait_for_next_data(9)Wait next accel data available after resume✨
msc_buffer_alloc(9)allocate a buffer for MSC✨
msc_buffer_clear_hw_header(9)clear hw header for multiblock✨
msc_buffer_contig_alloc(9)allocate a contiguous buffer for SINGLE mode✨
msc_buffer_contig_free(9)free a contiguous buffer✨
msc_buffer_contig_get_page(9)find a page at a given offset✨
msc_buffer_free(9)free buffers for MSC✨
msc_buffer_free_unless_used(9)free a buffer unless it's in use✨
msc_buffer_get_page(9)get MSC buffer page at a given offset✨
msc_buffer_iterate(9)go through multiblock buffer's data✨
msc_buffer_relink(9)set up block descriptors for multiblock mode✨
msc_buffer_unlocked_free_unless_used(9)free a buffer unless it's in use✨
msc_buffer_win_alloc(9)alloc a window for a multiblock mode✨
msc_buffer_win_free(9)free a window from MSC's window list✨
msc_configure(9)set up MSC hardware✨
msc_disable(9)disable MSC hardware✨
msc_find_window(9)find a window matching a given sg_table✨
msc_is_last_win(9)check if a window is the last one for a given MSC✨
msc_next_window(9)return next window in the multiblock buffer✨
msc_oldest_window(9)locate the window with oldest data✨
msc_win_oldest_sg(9)locate the oldest block in a given window✨
msc_win_to_user(9)iterator for msc_buffer_iterate() to copy data to user✨
mseal_mmap_page_zero(9)If the MMAP_PAGE_ZERO personality is set, mseal() the page mapped at address zero.✨
msecs_to_jiffies(9)- convert milliseconds to jiffies✨
msg_command_size(9)Actual size of transport SDU for command.✨
msg_fetch_notification(9)Fetch notification payload from transport SDU.✨
msg_fetch_response(9)Fetch response SCMI payload from transport SDU.✨
msg_read_header(9)Read SCMI header from transport SDU.✨
msg_response_size(9)Maximum size of transport SDU for response.✨
msg_to_mgmt_async(9)send message to mgmt without response✨
msg_to_mgmt_sync(9)send sync message to mgmt✨
msg_tx_prepare(9)Set up transport SDU for command.✨
msgb_bytes_used(9)Return the current number of bytes used in the buffer.✨
msgb_init(9)Initialize the given message buffer struct.✨
msgb_push_ack(9)Push a SSH ACK frame to the buffer.✨
msgb_push_buf(9)Push raw data to the buffer.✨
msgb_push_cmd(9)Push a SSH command frame with payload to the buffer.✨
msgb_push_crc(9)Compute CRC and push it to the buffer.✨
msgb_push_frame(9)Push a SSH message frame header to the buffer.✨
msgb_push_nak(9)Push a SSH NAK frame to the buffer.✨
msgb_push_syn(9)Push SSH SYN bytes to the buffer.✨
msgb_push_u16(9)Push a u16 value to the buffer.✨
msgdma_alloc_chan_resources(9)Allocate channel resources✨
msgdma_chan_desc_cleanup(9)Cleanup the completed descriptors✨
msgdma_complete_descriptor(9)Mark the active descriptor as complete✨
msgdma_copy_desc_to_fifo(9)copy descriptor(s) into controller FIFO✨
msgdma_desc_config(9)Configure the descriptor✨
msgdma_desc_config_eod(9)Mark the descriptor as end descriptor✨
msgdma_dev_remove(9)Device remove function✨
msgdma_free_chan_resources(9)Free channel resources✨