📦 linux-manual

M (continued)

• mpi_set_controller_config_resp(9)SPCv specific✨
• mpi_set_open_retry_interval_reg(9)✨
• mpi_set_phy_profile_resp(9)SPCv specific✨
• mpi_set_phys_g3_with_ssc(9)✨
• mpi_ssp_completion(9)process the event that FW response to the SSP request.✨
• mpi_thermal_hw_event(9)a thermal hw event has come.✨
• mpi_write_to_sgl(9)Funnction exports MPI to an sgl (msb first)✨
• mpic_free_timer(9)free hardware timer✨
• mpic_get_remain_time(9)get timer time✨
• mpic_request_timer(9)get a hardware timer✨
• mpic_start_timer(9)start hardware timer✨
• mpic_stop_timer(9)stop hardware timer✨
• mpiix_qc_issue(9)command issue✨
• mpiix_set_piomode(9)set initial PIO mode data✨
• mpimr_initialize_reply_sbuf_queues(9)initialize reply sense buffers✨
• mpol_misplaced(9)check whether current folio node is valid in policy✨
• mpol_parse_str(9)parse string to mempolicy, for tmpfs mpol mount option.✨
• mpol_shared_policy_init(9)initialize shared policy for inode✨
• mpol_to_str(9)format a mempolicy structure for printing✨
• mport_exit(9)Driver module unloading✨
• mpp_path_lookup_by_idx(9)look up a path in the proxy path table by its index✨
• mpr_read_pressure(9)Read pressure value from sensor✨
• mps_frame_deliver(9)transmit frames during mesh powersave✨
• mps_qos_null_get(9)create pre-addressed QoS Null frame for mesh powersave✨
• mps_qos_null_tx(9)send a QoS Null to indicate link-specific power mode✨
• mpsp_qos_null_append(9)append QoS Null frame to MPSP skb queue if needed✨
• mpt3sas_atto_get_sas_addr(9)get the ATTO SAS address from mfg page 1✨
• mpt3sas_atto_init(9)perform initializaion for ATTO branded adapter.✨
• mpt3sas_atto_validate_nvram(9)validate the ATTO nvram read from mfg pg1✨
• mpt3sas_base_attach(9)attach controller instance✨
• mpt3sas_base_check_cmd_timeout(9)Function to check timeout and command termination due to Host reset.✨
• mpt3sas_base_check_for_fault_and_issue_reset(9)check if IOC is in fault state and if it is in fault state then issue diag reset.✨
• mpt3sas_base_coredump_info(9)verbose translation of firmware CoreDump state✨
• mpt3sas_base_detach(9)remove controller instance✨
• mpt3sas_base_disable_msix(9)disables msix✨
• mpt3sas_base_done(9)base internal command completion routine✨
• mpt3sas_base_fault_info(9)verbose translation of firmware FAULT code✨
• mpt3sas_base_free_irq(9)free irq✨
• mpt3sas_base_free_resources(9)free resources controller resources✨
• mpt3sas_base_free_smid(9)put smid back on free_list✨
• mpt3sas_base_get_iocstate(9)Get the current state of a MPT adapter.✨
• mpt3sas_base_get_msg_frame(9)obtain request mf pointer✨
• mpt3sas_base_get_pcie_sgl(9)obtain a PCIe SGL virt addr✨
• mpt3sas_base_get_pcie_sgl_dma(9)obtain a PCIe SGL dma addr✨
• mpt3sas_base_get_reply_virt_addr(9)obtain reply frames virt address✨
• mpt3sas_base_get_sense_buffer(9)obtain a sense buffer virt addr✨
• mpt3sas_base_get_sense_buffer_dma(9)obtain a sense buffer dma addr✨
• mpt3sas_base_get_smid(9)obtain a free smid from internal queue✨
• mpt3sas_base_get_smid_hpr(9)obtain a free smid from hi-priority queue✨
• mpt3sas_base_get_smid_scsiio(9)obtain a free smid from scsiio queue✨
• mpt3sas_base_hard_reset_handler(9)reset controller✨
• mpt3sas_base_initialize_callback_handler(9)initialize the interrupt callback handler✨
• mpt3sas_base_lock_host_diagnostic(9)Disable Host Diagnostic Register writes✨
• mpt3sas_base_make_ioc_ready(9)put controller in READY state✨
• mpt3sas_base_map_resources(9)map in controller resources (io/irq/memap)✨
• mpt3sas_base_mask_interrupts(9)disable interrupts✨
• mpt3sas_base_pause_mq_polling(9)pause polling on the mq poll queues when driver is flushing out the IOs.✨
• mpt3sas_base_put_smid_nvme_encap(9)send NVMe encapsulated request to firmware✨
• mpt3sas_base_register_callback_handler(9)obtain index for the interrupt callback handler✨
• mpt3sas_base_release_callback_handler(9)clear interrupt callback handler✨
• mpt3sas_base_resume_mq_polling(9)Resume polling on mq poll queues.✨
• mpt3sas_base_sas_iounit_control(9)send sas iounit control to FW✨
• mpt3sas_base_scsi_enclosure_processor(9)sending request to sep device✨
• mpt3sas_base_start_watchdog(9)start the fault_reset_work_q✨
• mpt3sas_base_stop_watchdog(9)stop the fault_reset_work_q✨
• mpt3sas_base_sync_reply_irqs(9)flush pending MSIX interrupts✨
• mpt3sas_base_unlock_and_get_host_diagnostic(9)enable Host Diagnostic Register writes✨
• mpt3sas_base_unmap_resources(9)free controller resources✨
• mpt3sas_base_unmask_interrupts(9)enable interrupts✨
• mpt3sas_base_update_missing_delay(9)change the missing delay timers✨
• mpt3sas_base_validate_event_type(9)validating event types✨
• mpt3sas_base_wait_for_coredump_completion(9)Wait until coredump completes or times out✨
• mpt3sas_blk_mq_poll(9)poll the blk mq poll queue✨
• mpt3sas_check_for_pending_internal_cmds(9)check for pending internal messages✨
• mpt3sas_check_same_4gb_region(9)checks whether all reply queues in a set are having same upper 32bits in their base memory address.✨
• mpt3sas_config_done(9)config page completion routine✨
• mpt3sas_config_get_bios_pg2(9)obtain bios page 2✨
• mpt3sas_config_get_bios_pg3(9)obtain bios page 3✨
• mpt3sas_config_get_bios_pg4(9)read bios page 4✨
• mpt3sas_config_get_driver_trigger_pg0(9)obtain driver trigger page 0✨
• mpt3sas_config_get_driver_trigger_pg1(9)obtain driver trigger page 1✨
• mpt3sas_config_get_driver_trigger_pg2(9)obtain driver trigger page 2✨
• mpt3sas_config_get_driver_trigger_pg3(9)obtain driver trigger page 3✨
• mpt3sas_config_get_driver_trigger_pg4(9)obtain driver trigger page 4✨
• mpt3sas_config_get_enclosure_pg0(9)obtain enclosure page 0✨
• mpt3sas_config_get_expander_pg0(9)obtain expander page 0✨
• mpt3sas_config_get_expander_pg1(9)obtain expander page 1✨
• mpt3sas_config_get_ioc_pg1(9)obtain ioc page 1✨
• mpt3sas_config_get_ioc_pg8(9)obtain ioc page 8✨
• mpt3sas_config_get_iounit_pg0(9)obtain iounit page 0✨
• mpt3sas_config_get_iounit_pg1(9)obtain iounit page 1✨
• mpt3sas_config_get_iounit_pg3(9)obtain iounit page 3✨
• mpt3sas_config_get_iounit_pg7(9)obtain iounit page 7✨
• mpt3sas_config_get_iounit_pg8(9)obtain iounit page 8✨
• mpt3sas_config_get_manufacturing_pg0(9)obtain manufacturing page 0✨
• mpt3sas_config_get_manufacturing_pg1(9)obtain manufacturing page 1✨
• mpt3sas_config_get_manufacturing_pg10(9)obtain manufacturing page 10✨
• mpt3sas_config_get_manufacturing_pg11(9)obtain manufacturing page 11✨
• mpt3sas_config_get_number_hba_phys(9)obtain number of phys on the host✨
• mpt3sas_config_get_number_pds(9)obtain number of phys disk assigned to volume✨
• mpt3sas_config_get_pcie_device_pg0(9)obtain pcie device page 0✨
• mpt3sas_config_get_pcie_device_pg2(9)obtain pcie device page 2✨
• mpt3sas_config_get_pcie_iounit_pg1(9)obtain pcie iounit page 1✨
• mpt3sas_config_get_phy_pg0(9)obtain phy page 0✨
• mpt3sas_config_get_phy_pg1(9)obtain phy page 1✨
• mpt3sas_config_get_phys_disk_pg0(9)obtain phys disk page 0✨
• mpt3sas_config_get_raid_volume_pg0(9)obtain raid volume page 0✨
• mpt3sas_config_get_raid_volume_pg1(9)obtain raid volume page 1✨
• mpt3sas_config_get_sas_device_pg0(9)obtain sas device page 0✨
• mpt3sas_config_get_sas_iounit_pg0(9)obtain sas iounit page 0✨
• mpt3sas_config_get_sas_iounit_pg1(9)obtain sas iounit page 1✨
• mpt3sas_config_get_volume_handle(9)returns volume handle for give hidden raid components✨
• mpt3sas_config_get_volume_wwid(9)returns wwid given the volume handle✨
• mpt3sas_config_set_bios_pg4(9)write out bios page 4✨
• mpt3sas_config_set_ioc_pg1(9)modify ioc page 1✨
• mpt3sas_config_set_iounit_pg1(9)set iounit page 1✨
• mpt3sas_config_set_manufacturing_pg11(9)set manufacturing page 11✨
• mpt3sas_config_set_sas_iounit_pg1(9)send sas iounit page 1✨
• mpt3sas_config_update_driver_trigger_pg0(9)update driver trigger page 0✨
• mpt3sas_config_update_driver_trigger_pg1(9)update driver trigger page 1✨
• mpt3sas_config_update_driver_trigger_pg2(9)update driver trigger page 2✨
• mpt3sas_config_update_driver_trigger_pg3(9)update driver trigger page 3✨
• mpt3sas_config_update_driver_trigger_pg4(9)update driver trigger page 4✨
• mpt3sas_ctl_add_to_event_log(9)add event✨
• mpt3sas_ctl_clear_outstanding_ioctls(9)clears outstanding ioctl cmd.✨
• mpt3sas_ctl_done(9)ctl module completion routine✨
• mpt3sas_ctl_event_callback(9)firmware event handler (called at ISR time)✨
• mpt3sas_ctl_exit(9)exit point for ctl✨
• mpt3sas_ctl_init(9)main entry point for ctl.✨
• mpt3sas_ctl_pre_reset_handler(9)reset callback handler (for ctl)✨
• mpt3sas_ctl_release(9)release dma for ctl✨
• mpt3sas_ctl_reset_done_handler(9)reset callback handler (for ctl)✨
• mpt3sas_device_remove_by_sas_address(9)removing device object by sas address & port number✨
• mpt3sas_enable_diag_buffer(9)enabling diag_buffers support driver load time✨
• mpt3sas_expander_remove(9)removing expander object✨
• mpt3sas_free_enclosure_list(9)release memory✨
• mpt3sas_get_device_count(9)Retrieve the count of MCTP passthrough capable devices managed by the driver.✨
• mpt3sas_get_num_volumes(9)Get number of volumes in the ioc✨
• mpt3sas_get_pdev_by_handle(9)pcie device search✨
• mpt3sas_get_pdev_by_wwid(9)pcie device search✨
• mpt3sas_get_pdev_from_target(9)pcie device search✨
• mpt3sas_get_port_by_id(9)get hba port entry corresponding to provided port number from port list✨
• mpt3sas_get_sdev_by_addr(9)sas device search✨
• mpt3sas_get_sdev_by_handle(9)sas device search✨
• mpt3sas_get_vphy_by_phy(9)get virtual_phy object corresponding to phy number✨
• mpt3sas_halt_firmware(9)halt's mpt controller firmware✨
• mpt3sas_hwmon_register(9)register an hwmon device for the IOC✨
• mpt3sas_hwmon_unregister(9)tear down the hwmon device, if any✨
• mpt3sas_init_warpdrive_properties(9)Set properties for warpdrive direct I/O.✨
• mpt3sas_port_enable(9)initiate firmware discovery (don't wait for reply)✨
• mpt3sas_port_enable_complete(9)port enable completed (fake event)✨
• mpt3sas_port_enable_done(9)command completion routine for port enable✨
• mpt3sas_process_trigger_data(9)process the event data for the trigger✨
• mpt3sas_raid_device_find_by_handle(9)raid device search✨
• mpt3sas_remove_dead_ioc_func(9)kthread context to remove dead ioc✨
• mpt3sas_scsih_change_queue_depth(9)setting device queue depth✨
• mpt3sas_scsih_clear_outstanding_scsi_tm_commands(9)clears outstanding scsi & tm cmds.✨
• mpt3sas_scsih_clear_tm_flag(9)clear per target tm_busy✨
• mpt3sas_scsih_enclosure_find_by_handle(9)exclosure device search✨
• mpt3sas_scsih_event_callback(9)firmware event handler (called at ISR time)✨
• mpt3sas_scsih_expander_find_by_handle(9)expander device search✨
• mpt3sas_scsih_expander_find_by_sas_address(9)expander device search✨
• mpt3sas_scsih_issue_tm(9)main routine for sending tm requests✨
• mpt3sas_scsih_pre_reset_handler(9)reset callback handler (for scsih)✨
• mpt3sas_scsih_reset_done_handler(9)reset callback handler (for scsih)✨
• mpt3sas_scsih_scsi_lookup_get(9)returns scmd entry✨
• mpt3sas_scsih_set_tm_flag(9)set per target tm_busy✨
• mpt3sas_send_diag_release(9)Diag Release Message✨
• mpt3sas_setup_direct_io(9)setup MPI request for WARPDRIVE Direct I/O✨
• mpt3sas_transport_add_expander_phy(9)report expander phy to transport✨
• mpt3sas_transport_add_host_phy(9)report sas_host phy to transport✨
• mpt3sas_transport_add_phy_to_an_existing_port(9)adding new phy to existing port✨
• mpt3sas_transport_del_phy_from_an_existing_port(9)delete phy from existing port✨
• mpt3sas_transport_done(9)internal transport layer callback handler.✨
• mpt3sas_transport_port_add(9)insert port to the list✨
• mpt3sas_transport_port_remove(9)remove port from the list✨
• mpt3sas_transport_update_links(9)refreshing phy link changes✨
• mpt3sas_trigger_event(9)Event trigger handler✨
• mpt3sas_trigger_master(9)Master trigger handler✨
• mpt3sas_trigger_mpi(9)MPI trigger handler✨
• mpt3sas_trigger_scsi(9)SCSI trigger handler✨
• mpt3sas_wait_for_commands_to_complete(9)reset controller✨
• mpt3sas_wait_for_ioc(9)IOC's operational state is checked here.✨
• mpt_adapter_disable(9)Disable misbehaving MPT adapter.✨
• mpt_adapter_dispose(9)Free all resources associated with an MPT adapter✨
• mpt_add_chain(9)Place a 32 bit chain SGE at address pAddr.✨
• mpt_add_chain_64bit(9)Place a 64 bit chain SGE at address pAddr.✨
• mpt_add_sge(9)Place a simple 32 bit SGE at address pAddr.✨
• mpt_add_sge_64bit(9)Place a simple 64 bit SGE at address pAddr.✨
• mpt_add_sge_64bit_1078(9)Place a simple 64 bit SGE at address pAddr (1078 workaround).✨
• mpt_alloc_fw_memory(9)allocate firmware memory✨
• mpt_attach(9)Install a PCI intelligent MPT adapter.✨
• mpt_clear_taskmgmt_in_progress_flag(9)clear flags associated with task management✨
• mpt_config(9)Generic function to issue config message✨
• mpt_deregister(9)Deregister a protocol drivers resources.✨
• mpt_detach(9)Remove a PCI intelligent MPT adapter.✨
• mpt_detect_bound_ports(9)Search for matching PCI bus/dev_function✨
• mpt_device_driver_deregister(9)DeRegister device driver hooks✨
• mpt_device_driver_register(9)Register device driver hooks✨
• mpt_diag_reset(9)Perform hard reset of the adapter.✨