📦 linux-manual

82568 pages · page 206 of 413

M (continued)

megaraid_mbox_mm_handler(9)interface for CMM to issue commands to LLD✨
megaraid_mbox_prepare_epthru(9)prepare a command for physical devices✨
megaraid_mbox_prepare_pthru(9)prepare a command for physical devices✨
megaraid_mbox_product_info(9)some static information about the controller✨
megaraid_mbox_runpendq(9)execute commands queued in the pending queue✨
megaraid_mbox_setup_device_map(9)manage device ids✨
megaraid_mbox_setup_dma_pools(9)setup dma pool for command packets✨
megaraid_mbox_shutdown(9)PCI shutdown for megaraid HBA✨
megaraid_mbox_support_ha(9)Do we support clustering✨
megaraid_mbox_support_random_del(9)Do we support random deletion✨
megaraid_mbox_teardown_dma_pools(9)teardown dma pools for command packets✨
megaraid_probe_one(9)PCI hotplug entry point✨
megaraid_queue_command_lck(9)generic queue entry point for all LLDs✨
megaraid_reset_handler(9)device reset handler for mailbox based driver✨
megaraid_sysfs_alloc_resources(9)allocate sysfs related resources✨
megaraid_sysfs_free_resources(9)free sysfs related resources✨
megaraid_sysfs_get_ldmap(9)get update logical drive map✨
megaraid_sysfs_get_ldmap_done(9)callback for get ldmap✨
megaraid_sysfs_get_ldmap_timeout(9)timeout handling for get ldmap✨
megasas_add_remove_devices(9)Add/remove devices to SCSI mid-layer after an AEN event notification✨
megasas_adp_reset_fusion(9)For controller reset✨
megasas_adp_reset_gen2(9)For controller reset✨
megasas_adp_reset_wait_for_ready(9)initiate chip reset and wait for controller to come to ready state✨
megasas_adp_reset_xscale(9)For controller reset✨
megasas_alloc_cmds(9)Allocates the command packets✨
megasas_alloc_cmds_fusion(9)Allocates the command packets✨
megasas_alloc_ctrl_dma_buffers(9)Allocate consistent DMA buffers during driver load time✨
megasas_alloc_ctrl_mem(9)Allocate per controller memory for core data structures which are not common across MFI adapters and fusion adapters. For MFI based adapters, allocate producer and consumer buffers. For fusion…✨
megasas_alloc_host_crash_buffer(9)Host buffers for Crash dump collection from Firmware✨
megasas_alloc_irq_vectors(9)Allocate IRQ vectors/enable MSI-x vectors✨
megasas_allocate_raid_maps(9)Allocate memory for RAID maps✨
megasas_bios_param(9)Returns disk geometry for a disk✨
megasas_build_and_issue_cmd_fusion(9)Main routine for building and issuing non IOCTL cmd✨
megasas_build_dcdb(9)Prepares a direct cdb (DCDB) command✨
megasas_build_io_fusion(9)Prepares IOs to devices✨
megasas_build_ld_nonrw_fusion(9)prepares non rw ios for virtual disk✨
megasas_build_ldio(9)Prepares IOs to logical devices✨
megasas_build_ldio_fusion(9)Prepares IOs to devices✨
megasas_build_syspd_fusion(9)prepares rw/non-rw ios for syspd✨
megasas_check_reset_fusion(9)For controller reset check✨
megasas_check_reset_gen2(9)For controller reset check✨
megasas_check_reset_ppc(9)For controller reset check✨
megasas_check_reset_skinny(9)For controller reset check✨
megasas_check_reset_xscale(9)For controller reset check✨
megasas_check_same_4gb_region(9)check if allocation crosses same 4GB boundary or not✨
megasas_clear_intr_gen2(9)Check & clear interrupt✨
megasas_clear_intr_ppc(9)Check & clear interrupt✨
megasas_clear_intr_skinny(9)Check & clear interrupt✨
megasas_clear_intr_xscale(9)Check & clear interrupt✨
megasas_cmd_type(9)Checks if the cmd is for logical drive/sysPD and whether it's RW or non RW✨
megasas_complete_abort(9)Completes aborting a command✨
megasas_complete_cmd(9)Completes a command✨
megasas_complete_cmd_dpc(9)Returns FW's controller structure✨
megasas_complete_cmd_dpc_fusion(9)Completes command✨
megasas_complete_int_cmd(9)Completes an internal command✨
megasas_complete_r1_command(9)completes R1 FP write commands which has valid peer smid✨
megasas_configure_queue_sizes(9)Calculate size of request desc queue, reply desc queue, IO request frame queue, set can_queue.✨
megasas_create_frame_pool(9)Creates DMA pool for cmd frames✨
megasas_create_sg_sense_fusion(9)Creates DMA pool for cmd frames✨
megasas_decode_evt(9)Decode FW AEN event and print critical event for information.✨
megasas_deplete_reply_queue(9)Processes all completed commands✨
megasas_detach_one(9)PCI hot"un"plug entry point✨
megasas_disable_intr_fusion(9)Disables interrupt✨
megasas_disable_intr_gen2(9)Disables interrupt✨
megasas_disable_intr_ppc(9)Disable interrupt✨
megasas_disable_intr_skinny(9)Disables interrupt✨
megasas_disable_intr_xscale(9)Disables interrupt✨
megasas_dump(9)This function will print hexdump of provided buffer.✨
megasas_dump_fusion_io(9)This function will print key details of SCSI IO✨
megasas_dump_reg_set(9)This function will print hexdump of register set✨
megasas_enable_intr_fusion(9)Enables interrupts✨
megasas_enable_intr_gen2(9)Enables interrupts✨
megasas_enable_intr_ppc(9)Enables interrupts✨
megasas_enable_intr_skinny(9)Enables interrupts✨
megasas_enable_intr_xscale(9)Enables interrupts✨
megasas_enable_irq_poll(9)enable irqpoll✨
megasas_exit(9)Driver unload entry point✨
megasas_fault_detect_work(9)Worker function of FW fault handling workqueue.✨
megasas_fire_cmd_fusion(9)Sends command to the FW✨
megasas_fire_cmd_gen2(9)Sends command to the FW✨
megasas_fire_cmd_ppc(9)Sends command to the FW✨
megasas_fire_cmd_skinny(9)Sends command to the FW✨
megasas_fire_cmd_xscale(9)Sends command to the FW✨
megasas_flush_cache(9)Requests FW to flush all its caches✨
megasas_free_cmds(9)Free all the cmds in the free cmd pool✨
megasas_free_cmds_fusion(9)Free all the cmds in the free cmd pool✨
megasas_free_host_crash_buffer(9)Host buffers for Crash dump collection from Firmware✨
megasas_free_ioc_init_cmd(9)Free IOC INIT command frame✨
megasas_fusion_update_can_queue(9)Do all Adapter Queue depth related calculations here✨
megasas_generic_reset(9)Generic reset routine✨
megasas_get_cmd(9)Get a command from the free pool✨
megasas_get_cmd_fusion(9)Get a command from the free pool✨
megasas_get_ctrl_info(9)Returns FW's controller structure✨
megasas_get_device_list(9)Get the PD and LD device list from FW.✨
megasas_get_seq_num(9)Gets latest event sequence numbers✨
megasas_host_device_list_query(9)✨
megasas_init(9)Driver load entry point✨
megasas_init_adapter_fusion(9)Initializes the FW✨
megasas_init_fw(9)Initializes the FW✨
megasas_io_attach(9)Attaches this driver to SCSI mid-layer✨
megasas_ioc_init_fusion(9)Initializes the FW✨
megasas_irqpoll(9)process a queue for completed reply descriptors✨
megasas_is_prp_possible(9)Checks if native NVMe PRPs can be built for the IO✨
megasas_isr(9)isr entry point✨
megasas_isr_fusion(9)isr entry point✨
megasas_issue_blocked_abort_cmd(9)Aborts previously issued cmd✨
megasas_issue_blocked_cmd(9)Synchronous wrapper around regular FW cmds✨
megasas_issue_dcmd_fusion(9)Issues a MFI Pass thru cmd✨
megasas_issue_init_mfi(9)Initializes the FW✨
megasas_issue_pending_cmds_again(9)issue all pending cmds in FW again because of the fw reset✨
megasas_issue_polled(9)Issues a polling command✨
megasas_issue_tm(9)main routine for sending tm requests✨
megasas_ld_list_query(9)Returns FW's ld_list structure✨
megasas_make_prp_nvme(9)Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only✨
megasas_make_sgl(9)Build Scatter Gather List(SGLs)✨
megasas_make_sgl32(9)Prepares 32-bit SGL✨
megasas_make_sgl64(9)Prepares 64-bit SGL✨
megasas_make_sgl_fusion(9)Prepares 32-bit SGL✨
megasas_make_sgl_skinny(9)Prepares IEEE SGL✨
megasas_mgmt_fw_ioctl(9)Issues management ioctls to FW✨
megasas_mgmt_ioctl(9)char node ioctl entry point✨
megasas_probe_one(9)PCI hotplug entry point✨
megasas_queue_command(9)Queue entry point✨
megasas_read_fw_status_reg_fusion(9)returns the current FW status value✨
megasas_read_fw_status_reg_gen2(9)returns the current FW status value✨
megasas_read_fw_status_reg_ppc(9)returns the current FW status value✨
megasas_read_fw_status_reg_skinny(9)returns the current FW status value✨
megasas_read_fw_status_reg_xscale(9)returns the current FW status value✨
megasas_register_aen(9)Registers for asynchronous event notification✨
megasas_release_fusion(9)Reverses the FW initialization✨
megasas_release_mfi(9)Reverses the FW initialization✨
megasas_reset_bus_host(9)Bus & host reset handler entry point✨
megasas_reset_target(9)Issues target reset request to firmware (supported only for fusion adapters)✨
megasas_reset_timer(9)quiesce the adapter if required✨
megasas_resume(9)driver resume entry point✨
megasas_return_cmd(9)Return a cmd to free command pool✨
megasas_return_cmd_fusion(9)Return a cmd to free command pool✨
megasas_service_aen(9)Processes an event notification✨
megasas_set_dma_mask(9)Set DMA mask for supported controllers✨
megasas_set_dma_settings(9)Populate DMA address, length and flags for DCMDs✨
megasas_set_high_iops_queue_affinity_and_hint(9)Set affinity and hint for high IOPS queues✨
megasas_set_pd_lba(9)Sets PD LBA✨
megasas_set_raidflag_cpu_affinity(9)This function sets the cpu affinity (cpu of the controller) and raid_flags in the raid context based on IO type.✨
megasas_setup_irqs_msix(9)register MSI-x interrupts.✨
megasas_setup_jbod_map(9)setup jbod map for FP seq_number.✨
megasas_shutdown(9)Shutdown entry point✨
megasas_shutdown_controller(9)Instructs FW to shutdown the controller✨
megasas_start_aen(9)Subscribes to AEN during driver load time✨
megasas_start_timer(9)Initializes sriov heartbeat timer object✨
megasas_stream_detect(9)stream detection on read and and write IOs✨
megasas_suspend(9)driver suspend entry point✨
megasas_sync_irqs(9)Synchronizes all IRQs owned by adapter✨
megasas_sync_pd_seq_num(9)JBOD SEQ MAP✨
megasas_task_abort(9)Issues task abort request to firmware (supported only for fusion adapters)✨
megasas_teardown_frame_pool(9)Destroy the cmd frame DMA pool✨
megasas_tm_response_code(9)translation of device response code✨
megasas_transition_to_ready(9)Move the FW to READY state✨
megasas_trigger_snap_dump(9)Trigger snap dump in FW✨
megasas_update_device_list(9)Update the PD and LD device list from FW after an AEN event notification✨
megasas_wait_for_outstanding(9)Wait for all outstanding cmds✨
megasas_write_64bit_req_desc(9)PCI writes 64bit request descriptor✨
mei_cancel_work(9)Cancel mei background jobs✨
mei_cl_add_rd_completed(9)add read completed callback to list with lock and vtag check✨
mei_cl_all_disconnect(9)disconnect forcefully all connected clients✨
mei_cl_alloc_cb(9)a convenient wrapper for allocating read cb✨
mei_cl_alloc_linked(9)allocate and link host client✨
mei_cl_allocate(9)allocates cl structure and sets it up.✨
mei_cl_bus_dev_add(9)add me client devices✨
mei_cl_bus_dev_alloc(9)initialize and allocate mei client device✨
mei_cl_bus_dev_destroy(9)destroy me client devices object✨
mei_cl_bus_dev_fixup(9)run fixup handlers✨
mei_cl_bus_dev_init(9)allocate and initializes an mei client devices based on me client✨
mei_cl_bus_dev_setup(9)setup me client device run fix up routines and set the device name✨
mei_cl_bus_dev_stop(9)stop the driver✨
mei_cl_bus_module_get(9)acquire module of the underlying hw driver.✨
mei_cl_bus_module_put(9)release the underlying hw module.✨
mei_cl_bus_notif_work(9)dispatch FW notif event for a bus device✨
mei_cl_bus_notify_event(9)schedule notify cb on bus client✨
mei_cl_bus_remove_device(9)remove a devices form the bus✨
mei_cl_bus_remove_devices(9)remove all devices form the bus✨
mei_cl_bus_rescan(9)scan me clients list and add create devices for eligible clients✨
mei_cl_bus_rx_event(9)schedule rx event✨
mei_cl_bus_rx_work(9)dispatch rx event for a bus device✨
mei_cl_bus_set_name(9)set device name for me client device <controller>-<client device>✨
mei_cl_bus_vtag(9)get bus vtag entry wrapper The tag for bus client is always first.✨
mei_cl_bus_vtag_alloc(9)add bus client entry to vtag map✨
mei_cl_bus_vtag_free(9)remove the bus entry from vtag map✨
mei_cl_complete(9)processes completed operation for a client✨
mei_cl_conn_status_to_errno(9)convert client connect response status to error code✨
mei_cl_connect(9)connect host client to the me one✨
mei_cl_del_rd_completed(9)unlink read completed callback with lock and free it✨
mei_cl_device_find(9)find matching entry in the driver id table✨
mei_cl_device_match(9)device match function✨
mei_cl_device_probe(9)bus probe function✨
mei_cl_device_remove(9)remove device from the bus✨
mei_cl_device_uevent(9)me client bus uevent handler✨
mei_cl_disconnect(9)disconnect host client from the me one✨
mei_cl_dma_alloc_and_map(9)send client dma map request✨
mei_cl_dma_unmap(9)send client dma unmap request✨
mei_cl_enqueue_ctrl_wr_cb(9)a convenient wrapper for allocating and enqueuing of the control commands cb✨