megasas_complete_cmd(9)

megasas_complete_cmd(9) — Kernel API Manual — okay so bestie, this is the tiny-but-mighty “you’re done, command” function, and it’s literally here to complete a command. 💖

✨ NAME ✨

megasas_complete_cmd — Completes a command. That’s the whole vibe. 🫶

🌸 SYNOPSIS 🌸

Here’s the signature, copied exactly because we do not mess with code, periodt:

void megasas_complete_cmd (struct megasas_instance *instance , struct
megasas_cmd *cmd , u8 alt_status );

🎀 ARGUMENTS 🎀

• instance — Adapter soft state. That’s the adapter’s soft state, bestie. 💅
• cmd — Command to be completed. The command getting its completion moment. ✨
• alt_status — If non-zero, use this value as status to SCSI mid-layer instead of the value returned by the FW. This should be used if caller wants an alternate status (as in the case of aborted commands). So yes, this is the “use my alternate status instead of the FW’s status” move, and it’s specifically for when the caller wants an alternate status, like with aborted commands. 🦋

🦋 SEE ALSO 🦋

First up, the kernel file:

• Kernel file: ./drivers/scsi/megaraid/megaraid_sas_base.c — that’s where it lives, no cap. 🧚

Then the whole megasas extended universe — every reference, same order, all here:

• megasas_set_dma_settings(9), megasas_get_cmd(9), megasas_return_cmd(9), megasas_decode_evt(9), megasas_enable_intr_xscale(9), megasas_disable_intr_xscale(9)
• megasas_read_fw_status_reg_xscale(9), megasas_clear_intr_xscale(9), megasas_fire_cmd_xscale(9), megasas_adp_reset_xscale(9), megasas_check_reset_xscale(9)
• megasas_enable_intr_ppc(9), megasas_disable_intr_ppc(9), megasas_read_fw_status_reg_ppc(9), megasas_clear_intr_ppc(9), megasas_fire_cmd_ppc(9), megasas_check_reset_ppc(9)
• megasas_enable_intr_skinny(9), megasas_disable_intr_skinny(9), megasas_read_fw_status_reg_skinny(9), megasas_clear_intr_skinny(9), megasas_fire_cmd_skinny(9), megasas_check_reset_skinny(9)
• megasas_enable_intr_gen2(9), megasas_disable_intr_gen2(9), megasas_read_fw_status_reg_gen2(9), megasas_clear_intr_gen2(9), megasas_fire_cmd_gen2(9), megasas_adp_reset_gen2(9), megasas_check_reset_gen2(9)
• megasas_issue_polled(9), megasas_issue_blocked_cmd(9), megasas_issue_blocked_abort_cmd(9), megasas_make_sgl32(9), megasas_make_sgl64(9), megasas_make_sgl_skinny(9)
• megasas_build_dcdb(9), megasas_build_ldio(9), megasas_cmd_type(9), megasas_queue_command(9), megasas_complete_cmd_dpc(9), megasas_start_timer(9)
• megasas_wait_for_outstanding(9), megasas_generic_reset(9), megasas_reset_timer(9), megasas_dump(9), megasas_dump_reg_set(9), megasas_dump_fusion_io(9)
• megasas_reset_bus_host(9), megasas_task_abort(9), megasas_reset_target(9), megasas_bios_param(9), megasas_service_aen(9), megasas_complete_int_cmd(9)
• megasas_complete_abort(9), megasas_issue_pending_cmds_again(9), megasas_deplete_reply_queue(9), megasas_isr(9), megasas_transition_to_ready(9), megasas_teardown_frame_pool(9)
• megasas_create_frame_pool(9), megasas_free_cmds(9), megasas_alloc_cmds(9), megasas_ld_list_query(9), megasas_host_device_list_query(9), megasas_get_ctrl_info(9)
• megasas_issue_init_mfi(9), megasas_setup_irqs_msix(9), megasas_setup_jbod_map(9), megasas_get_device_list(9), megasas_set_high_iops_queue_affinity_and_hint(9), megasas_alloc_irq_vectors(9)
• megasas_init_fw(9), megasas_release_mfi(9), megasas_get_seq_num(9), megasas_register_aen(9), megasas_start_aen(9), megasas_io_attach(9)
• megasas_set_dma_mask(9), megasas_alloc_ctrl_mem(9), megasas_alloc_ctrl_dma_buffers(9), megasas_probe_one(9), megasas_flush_cache(9), megasas_shutdown_controller(9)
• megasas_suspend(9), megasas_resume(9), megasas_detach_one(9), megasas_shutdown(9), megasas_mgmt_fw_ioctl(9), megasas_mgmt_ioctl(9)
• megasas_update_device_list(9), megasas_add_remove_devices(9), megasas_init(9), megasas_exit(9)

that’s the whole page, bestie ✨ source/version ./drivers/scsi/megaraid, dated October 2026, title megasas_complete_cmd(9) — bye, love u, go complete some commands 💅🫶