📦 linux-manual

L (continued)

• lpfc_plogi_confirm_nport(9)Confirm plogi wwpn matches stored ndlp✨
• lpfc_poll_eratt(9)Error attention polling timer timeout handler✨
• lpfc_poll_rearm_timer(9)Routine to modify fcp_poll timer of hba✨
• lpfc_poll_show(9)Return text about poll support for the adapter✨
• lpfc_poll_start_timer(9)Routine to start fcp_poll_timer of HBA✨
• lpfc_poll_store(9)Set the value of cfg_poll for the adapter✨
• lpfc_poll_timeout(9)Restart polling timer✨
• lpfc_post_init_setup(9)Perform necessary device post initialization setup.✨
• lpfc_post_rcv_buf(9)Post the initial receive IOCB buffers to ELS ring✨
• lpfc_prep_els_iocb(9)Allocate and prepare a lpfc iocb data structure✨
• lpfc_prep_seq(9)Prep sequence for ULP processing✨
• lpfc_programtype_show(9)Return the program type of the hba✨
• lpfc_prot_group_type(9)Get prtotection group type of SCSI command✨
• lpfc_put_cmd_rsp_buf_per_hdwq(9)Put one CMD/RSP buffer into hdwq pool✨
• lpfc_put_sgl_per_hdwq(9)Put one SGL chunk into hdwq pool✨
• lpfc_queuecommand(9)scsi_host_template queuecommand entry point✨
• lpfc_ramp_down_queue_handler(9)WORKER_RAMP_DOWN_QUEUE event handler✨
• lpfc_rampdown_queue_depth(9)Post RAMP_DOWN_QUEUE event to worker thread✨
• lpfc_ras_stop_fwlog(9)Disable FW logging by the adapter✨
• lpfc_rcv_seq_check_edtov(9)Cleans up timed out receive sequences.✨
• lpfc_rd_obj_emb0_handle_job(9)Handles completion for non-embedded READ_OBJECT_V0 mailbox commands✨
• lpfc_read_config(9)Prepare a mailbox command for reading HBA configuration✨
• lpfc_read_fcf_conn_tbl(9)Create driver FCF connection table.✨
• lpfc_read_fcoe_param(9)Read FCoe parameters from conf region..✨
• lpfc_read_lnk_stat(9)Prepare a mailbox command for reading HBA link stats✨
• lpfc_read_nv(9)Prepare a mailbox command for reading HBA's NVRAM param✨
• lpfc_read_object(9)Retrieve object data from HBA✨
• lpfc_read_rev(9)Prepare a mailbox command for reading HBA revision✨
• lpfc_read_sparam(9)Prepare a mailbox command for reading HBA parameters✨
• lpfc_read_topology(9)Prepare a mailbox command for reading HBA topology✨
• lpfc_reg_fab_ctrl_node(9)RPI register the fabric controller node.✨
• lpfc_reg_fcfi(9)Initialize the REG_FCFI mailbox command✨
• lpfc_reg_fcfi_mrq(9)Initialize the REG_FCFI_MRQ mailbox command✨
• lpfc_reg_rpi(9)Prepare a mailbox command for registering remote login✨
• lpfc_reg_vfi(9)Initialize the REG_VFI mailbox command✨
• lpfc_reg_vpi(9)Prepare a mailbox command for registering vport identifier✨
• lpfc_register_fcf(9)Register the FCF with hba.✨
• lpfc_register_new_vport(9)Register a new vport with a HBA✨
• lpfc_release_io_buf(9)Return one IO buf back to free pool✨
• lpfc_release_nvme_buf(9)Return a nvme buffer back to hba nvme buf list.✨
• lpfc_release_rpi(9)Release a RPI by issuing unreg_login mailbox cmd.✨
• lpfc_release_scsi_buf(9)Return a scsi buffer back to hba scsi buf list.✨
• lpfc_release_scsi_buf_s3(9)Return a scsi buffer back to hba scsi buf list✨
• lpfc_release_scsi_buf_s4(9)Return a scsi buffer back to hba scsi buf list.✨
• lpfc_request_features(9)Configure SLI4 REQUEST_FEATURES mailbox✨
• lpfc_request_firmware_upgrade_init(9)Enable initial linux generic fw upgrade✨
• lpfc_request_firmware_upgrade_store(9)Request for Linux generic firmware upgrade✨
• lpfc_reset_barrier(9)Make HBA ready for HBA reset✨
• lpfc_reset_flush_io_context(9)✨
• lpfc_reset_hba(9)Reset a hba✨
• lpfc_reset_pci_bus(9)resets PCI bridge controller's secondary bus of an HBA✨
• lpfc_reset_stats(9)Copy the adapter link stats information✨
• lpfc_resp_iocb(9)Get next response iocb entry in the ring✨
• lpfc_restrict_login_init(9)Set the vport restrict login flag✨
• lpfc_restrict_login_set(9)Set the vport restrict login flag✨
• lpfc_resume_fabric_iocbs(9)Issue a fabric iocb from driver internal list✨
• lpfc_resume_rpi(9)Initialize the RESUME_RPI mailbox command✨
• lpfc_retry_pport_discovery(9)Start timer to retry FLOGI.✨
• lpfc_rq_buf_free(9)Free a RQ DMA buffer✨
• lpfc_rq_create(9)Create a Receive Queue on the HBA✨
• lpfc_rq_destroy(9)Destroy a Receive Queue on the HBA✨
• lpfc_rrq_timeout(9)The RRQ-timer timeout handler✨
• lpfc_rscn_disc(9)Perform rscn discovery for a vport✨
• lpfc_rscn_payload_check(9)Check whether there is a pending rscn to a did✨
• lpfc_rscn_recovery_check(9)Send recovery event to vport nodes matching rscn✨
• lpfc_rx_monitor_create_ring(9)Initialize ring buffer for rx_monitor✨
• lpfc_rx_monitor_destroy_ring(9)Free ring buffer for rx_monitor✨
• lpfc_rx_monitor_record(9)Insert an entry into rx_monitor's ring✨
• lpfc_rx_monitor_report(9)Read out rx_monitor's ring✨
• lpfc_sc_to_bg_opcodes(9)Determine the BlockGuard opcodes to be used with the specified SCSI command.✨
• lpfc_scan_finished(9)method for SCSI layer to detect whether scan is done✨
• lpfc_scsi_api_table_setup(9)Set up scsi api function jump table✨
• lpfc_scsi_cmd_iocb_cmpl(9)Scsi cmnd IOCB completion routine✨
• lpfc_scsi_dev_block(9)set all scsi hosts to block state✨
• lpfc_scsi_free(9)Free all the SCSI buffers and IOCBs from driver lists✨
• lpfc_scsi_prep_cmnd(9)Wrapper func for convert scsi cmnd to FCP info unit✨
• lpfc_scsi_prep_cmnd_buf(9)Wrapper function for IOCB/WQE mapping of scsi buffer✨
• lpfc_scsi_prep_cmnd_buf_s3(9)SLI-3 IOCB init for the IO✨
• lpfc_scsi_prep_cmnd_buf_s4(9)SLI-4 WQE init for the IO✨
• lpfc_scsi_prep_dma_buf(9)Wrapper function for DMA mapping of scsi buffer✨
• lpfc_scsi_prep_dma_buf_s3(9)DMA mapping for scsi buffer to SLI3 IF spec✨
• lpfc_scsi_prep_dma_buf_s4(9)DMA mapping for scsi buffer to SLI4 IF spec✨
• lpfc_scsi_prep_task_mgmt_cmd_s3(9)Convert SLI3 scsi TM cmd to FCP info unit✨
• lpfc_scsi_prep_task_mgmt_cmd_s4(9)Convert SLI4 scsi TM cmd to FCP info unit✨
• lpfc_scsi_unprep_dma_buf(9)Un-map DMA mapping of SG-list for dev✨
• lpfc_sdev_configure(9)scsi_host_template sdev_configure entry point✨
• lpfc_sdev_destroy(9)sdev_destroy entry point of SHT data structure✨
• lpfc_sdev_init(9)scsi_host_template sdev_init entry point✨
• lpfc_selective_reset(9)Offline then onlines the port✨
• lpfc_send_els_event(9)Posts unsolicited els event✨
• lpfc_send_els_failure_event(9)Posts an ELS command failure event✨
• lpfc_send_fastpath_evt(9)Posts events generated from fast path✨
• lpfc_send_rrq(9)Sends ELS RRQ if needed.✨
• lpfc_send_rscn_event(9)Send an RSCN event to management application✨
• lpfc_send_scsi_error_event(9)Posts an event when there is SCSI error✨
• lpfc_send_taskmgmt(9)Generic SCSI Task Mgmt Handler✨
• lpfc_seq_complete(9)Indicates if a sequence is complete✨
• lpfc_serialnum_show(9)Return the hba serial number in ascii✨
• lpfc_set_rport_loss_tmo(9)Set the rport dev loss tmo✨
• lpfc_set_rrq_active(9)set RRQ active bit in xri_bitmap.✨
• lpfc_set_vport_symbolic_name(9)Set the vport's symbolic name✨
• lpfc_setup_bg(9)Setup Block guard structures and debug areas.✨
• lpfc_setup_cq_lookup(9)Setup the CQ lookup table✨
• lpfc_setup_driver_resource_phase1(9)Phase1 etup driver internal resources.✨
• lpfc_setup_driver_resource_phase2(9)Phase2 setup driver internal resources.✨
• lpfc_setup_endian_order(9)Write endian order to an SLI4 if_type 0 port.✨
• lpfc_setup_fdmi_mask(9)Setup initial FDMI mask for HBA and Port attributes✨
• lpfc_sg_seg_cnt_init(9)Set the hba sg_seg_cnt initial value✨
• lpfc_sg_seg_cnt_show(9)Display the scatter/gather list sizes configured for the adapter✨
• lpfc_sha_init(9)Set up initial array of hash table entries✨
• lpfc_sha_iterate(9)Iterate initial hash table with the working hash table✨
• lpfc_sli3_bsg_diag_loopback_mode(9)process an sli3 bsg vendor command✨
• lpfc_sli3_post_buffer(9)Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring✨
• lpfc_sli4_abort_partial_seq(9)Abort partially assembled unsol sequence✨
• lpfc_sli4_abort_ulp_seq(9)Abort assembled unsol sequence from ulp✨
• lpfc_sli4_add_fcf_record(9)Manually add an FCF Record.✨
• lpfc_sli4_alloc_extent(9)Allocate an SLI4 resource extent.✨
• lpfc_sli4_alloc_resource_identifiers(9)Allocate all SLI4 resource extents.✨
• lpfc_sli4_alloc_rpi(9)Get an available rpi in the device's range✨
• lpfc_sli4_alloc_xri(9)Get an available rpi in the device's range✨
• lpfc_sli4_arm_cqeq_intr(9)Arm sli-4 device completion and event queues✨
• lpfc_sli4_async_cmstat_evt(9)Process the asynchronous cmstat event✨
• lpfc_sli4_async_dcbx_evt(9)Process the asynchronous dcbx event✨
• lpfc_sli4_async_event_proc(9)Process all the pending asynchronous event✨
• lpfc_sli4_async_fc_evt(9)Process the asynchronous FC link event✨
• lpfc_sli4_async_fip_evt(9)Process the asynchronous FCoE FIP event✨
• lpfc_sli4_async_grp5_evt(9)Process the asynchronous group5 event✨
• lpfc_sli4_async_link_evt(9)Process the asynchronous FCoE link event✨
• lpfc_sli4_async_mbox_block(9)Block posting SLI4 asynchronous mailbox command✨
• lpfc_sli4_async_mbox_unblock(9)Block posting SLI4 async mailbox command✨
• lpfc_sli4_async_sli_evt(9)Process the asynchronous SLI link event✨
• lpfc_sli4_bar0_register_memmap(9)Set up SLI4 BAR0 register memory map.✨
• lpfc_sli4_bar1_register_memmap(9)Set up SLI4 BAR1 register memory map.✨
• lpfc_sli4_bar2_register_memmap(9)Set up SLI4 BAR2 register memory map.✨
• lpfc_sli4_brdreset(9)Reset a sli-4 HBA✨
• lpfc_sli4_bsg_diag_loopback_mode(9)process an sli4 bsg vendor command✨
• lpfc_sli4_bsg_diag_mode_end(9)sli4 bsg vendor command for ending diag mode✨
• lpfc_sli4_bsg_link_diag_test(9)sli4 bsg vendor command for diag link test✨
• lpfc_sli4_bsg_set_link_diag_state(9)set sli4 link diag state✨
• lpfc_sli4_bsg_set_loopback_mode(9)set sli4 internal loopback diagnostic✨
• lpfc_sli4_build_dflt_fcf_record(9)Build the driver's default FCF Record.✨
• lpfc_sli4_calc_ring(9)Calculates which ring to use✨
• lpfc_sli4_cfg_post_extnts(9)✨
• lpfc_sli4_cgn_params_read(9)Read and Validate FW congestion parameters.✨
• lpfc_sli4_cgn_parm_chg_evt(9)Process a FW congestion param change event✨
• lpfc_sli4_chk_avail_extnt_rsrc(9)Check for available SLI4 resource extents.✨
• lpfc_sli4_clear_fcf_rr_bmask(9)✨
• lpfc_sli4_config(9)Initialize the SLI4 Config Mailbox command✨
• lpfc_sli4_cq_event_alloc(9)Allocate a completion-queue event from free pool✨
• lpfc_sli4_cq_event_pool_create(9)Create completion-queue event free pool✨
• lpfc_sli4_cq_event_pool_destroy(9)Free completion-queue event free pool✨
• lpfc_sli4_cq_event_release(9)Release a completion-queue event to free pool✨
• lpfc_sli4_cq_event_release_all(9)Release all cq events to the free pool✨
• lpfc_sli4_cq_get(9)Gets the next valid CQE from a CQ✨
• lpfc_sli4_create_rpi_hdr(9)Allocate an rpi header memory region✨
• lpfc_sli4_dealloc_extent(9)Deallocate an SLI4 resource extent.✨
• lpfc_sli4_dealloc_resource_identifiers(9)Deallocate all SLI4 resource extents.✨
• lpfc_sli4_diag_fcport_reg_setup(9)setup port registrations for diagnostic✨
• lpfc_sli4_disable_intr(9)Disable device interrupt to SLI-4 device✨
• lpfc_sli4_dly_hba_process_cq(9)fast-path work handler when started by timer✨
• lpfc_sli4_dly_sp_process_cq(9)slow-path work handler when started by timer✨
• lpfc_sli4_driver_resource_setup(9)Setup drvr internal resources for SLI4 dev✨
• lpfc_sli4_driver_resource_unset(9)Unset drvr internal resources for SLI4 dev✨
• lpfc_sli4_dump_cfg_rg23(9)Dump sli4 port config region 23✨
• lpfc_sli4_els_preprocess_rspiocbq(9)Get response iocbq from els wcqe✨
• lpfc_sli4_els_sgl_update(9)update ELS xri-sgl sizing and mapping✨
• lpfc_sli4_els_xri_abort_event_proc(9)Process els xri abort event✨
• lpfc_sli4_els_xri_aborted(9)Slow-path process of els xri abort✨
• lpfc_sli4_enable_intr(9)Enable device interrupt to SLI-4 device✨
• lpfc_sli4_enable_msi(9)Enable MSI interrupt mode to SLI-4 device✨
• lpfc_sli4_enable_msix(9)Enable MSI-X interrupt mode to SLI-4 device✨
• lpfc_sli4_eq_clr_intr(9)Turn off interrupts from this EQ✨
• lpfc_sli4_eq_get(9)Gets the next valid EQE from a EQ✨
• lpfc_sli4_eratt_read(9)read sli-4 error attention events✨
• lpfc_sli4_fcf_dead_failthrough(9)Failthrough routine to fcf dead event✨
• lpfc_sli4_fcf_pri_list_add(9)✨
• lpfc_sli4_fcf_pri_list_del(9)✨
• lpfc_sli4_fcf_rec_mbox_parse(9)Parse read_fcf mbox command.✨
• lpfc_sli4_fcf_record_match(9)testing new FCF record for matching existing FCF✨
• lpfc_sli4_fcf_redisc_event_proc(9)Process fcf table rediscovery event✨
• lpfc_sli4_fcf_redisc_wait_tmo(9)FCF table rediscover wait timeout✨
• lpfc_sli4_fcf_rr_index_clear(9)Clear bmask from eligible fcf record index✨
• lpfc_sli4_fcf_rr_index_set(9)Set bmask with eligible fcf record index✨
• lpfc_sli4_fcf_rr_next_index_get(9)Get next eligible fcf record index✨
• lpfc_sli4_fcf_rr_next_proc(9)processing next roundrobin fcf✨
• lpfc_sli4_fcf_rr_read_fcf_rec(9)Read hba fcf record for roundrobin fcf.✨
• lpfc_sli4_fcf_scan_read_fcf_rec(9)Read hba fcf record for fcf scan.✨
• lpfc_sli4_fp_handle_cqe(9)Process fast-path work queue completion entry✨
• lpfc_sli4_fp_handle_fcp_wcqe(9)Process fast-path work queue completion entry✨
• lpfc_sli4_fp_handle_rel_wcqe(9)Handle fast-path WQ entry consumed event✨
• lpfc_sli4_free_rpi(9)Release an rpi for reuse.✨
• lpfc_sli4_free_sp_events(9)Cleanup sp_queue_events to free rspiocb which got deferred✨
• lpfc_sli4_free_xri(9)Release an xri for reuse.✨
• lpfc_sli4_get_allocated_extnts(9)Get the port's allocated extents.✨
• lpfc_sli4_get_avail_extnt_rsrc(9)Get available resource extent count.✨
• lpfc_sli4_get_config_region23(9)Get sli4 port region 23 data.✨
• lpfc_sli4_get_ctl_attr(9)Retrieve SLI4 device controller attributes✨
• lpfc_sli4_get_els_iocb_cnt(9)Calculate the # of ELS IOCBs to reserve✨
• lpfc_sli4_get_iocb_cnt(9)Calculate the # of total IOCBs to reserve✨
• lpfc_sli4_handle_received_buffer(9)Handle received buffers from firmware✨