lpfc_set_rport_loss_tmo(9)

💖 NAME 💖

okay bestie, welcome to lpfc_set_rport_loss_tmo(9) from the Kernel API Manual ✨ — this one is literally about setting the rport dev loss tmo 💅.

lpfc_set_rport_loss_tmo — set the rport dev loss tmo 🎀

✨ SYNOPSIS ✨

void lpfc_set_rport_loss_tmo (struct fc_rport *rport , uint32_t timeout
);

🎀 ARGUMENTS 🎀

• rport — fc rport address 🫶.
• timeout — new value for dev loss tmo ⏳.

🌸 DESCRIPTION 🌸

So here's the tea ☕: if timeout is non zero, set the dev_loss_tmo to timeout — slay ✨. Else, set dev_loss_tmo to one 🎀.

no cap, that's the whole behavior — non zero means use timeout, otherwise it's one 💖.

🦋 SEE ALSO 🦋

okay this SEE ALSO list is giving full group-chat energy — everyone's here, and yes, Kernel file ./drivers/scsi/lpfc/lpfc_attr.c is the first one 💅:

Kernel file ./drivers/scsi/lpfc/lpfc_attr.c lpfc_jedec_to_ascii(9),
lpfc_drvr_version_show(9), lpfc_enable_fip_show(9), lpfc_info_show(9),
lpfc_serialnum_show(9), lpfc_temp_sensor_show(9),
lpfc_modeldesc_show(9), lpfc_modelname_show(9),
lpfc_programtype_show(9), lpfc_vportnum_show(9), lpfc_fwrev_show(9),
lpfc_hdw_show(9), lpfc_option_rom_version_show(9),
lpfc_link_state_show(9), lpfc_sli4_protocol_show(9),
lpfc_oas_supported_show(9), lpfc_link_state_store(9),
lpfc_num_discovered_ports_show(9), lpfc_issue_lip(9),
lpfc_do_offline(9), lpfc_reset_pci_bus(9), lpfc_selective_reset(9),
lpfc_issue_reset(9), lpfc_sli4_pdev_status_reg_wait(9),
lpfc_sli4_pdev_reg_request(9), lpfc_nport_evt_cnt_show(9),
lpfc_board_mode_show(9), lpfc_board_mode_store(9), lpfc_get_hba_info(9),
lpfc_max_rpi_show(9), lpfc_used_rpi_show(9), lpfc_max_xri_show(9),
lpfc_used_xri_show(9), lpfc_max_vpi_show(9), lpfc_used_vpi_show(9),
lpfc_npiv_info_show(9), lpfc_poll_show(9), lpfc_poll_store(9),
lpfc_sriov_hw_max_virtfn_show(9), lpfc_enable_bbcr_set(9),
lpfc_wwn_set(9), lpfc_oas_tgt_show(9), lpfc_oas_tgt_store(9),
lpfc_oas_priority_show(9), lpfc_oas_priority_store(9),
lpfc_oas_vpt_show(9), lpfc_oas_vpt_store(9), lpfc_oas_lun_state_show(9),
lpfc_oas_lun_state_store(9), lpfc_oas_lun_status_show(9),
lpfc_oas_lun_state_set(9), lpfc_oas_lun_get_next(9),
lpfc_oas_lun_state_change(9), lpfc_oas_lun_show(9),
lpfc_oas_lun_store(9), lpfc_nodev_tmo_show(9), lpfc_nodev_tmo_init(9),
lpfc_update_rport_devloss_tmo(9), lpfc_nodev_tmo_set(9),
lpfc_devloss_tmo_set(9), lpfc_tgt_queue_depth_set(9),
lpfc_restrict_login_init(9), lpfc_restrict_login_set(9),
lpfc_topology_store(9), lpfc_static_vport_show(9),
lpfc_link_speed_store(9), lpfc_link_speed_init(9),
lpfc_aer_support_store(9), lpfc_aer_cleanup_state(9),
lpfc_sriov_nr_virtfn_store(9), lpfc_request_firmware_upgrade_store(9),
lpfc_request_firmware_upgrade_init(9), lpfc_force_rscn_store(9),
lpfc_force_rscn_init(9), lpfc_fcp_imax_store(9), lpfc_fcp_imax_init(9),
lpfc_cq_max_proc_limit_store(9), lpfc_cq_max_proc_limit_init(9),
lpfc_fcp_cpu_map_show(9), lpfc_fcp_cpu_map_store(9),
lpfc_fcp_cpu_map_init(9), lpfc_cpumask_irq_mode_init(9),
lpfc_irq_chann_show(9), lpfc_sg_seg_cnt_show(9),
lpfc_sg_seg_cnt_init(9), sysfs_ctlreg_write(9), sysfs_ctlreg_read(9),
sysfs_mbox_write(9), sysfs_mbox_read(9), lpfc_alloc_sysfs_attr(9),
lpfc_free_sysfs_attr(9), lpfc_get_host_symbolic_name(9),
lpfc_get_host_port_id(9), lpfc_get_host_port_type(9),
lpfc_get_host_port_state(9), lpfc_get_host_speed(9),
lpfc_get_host_fabric_name(9), lpfc_get_stats(9), lpfc_reset_stats(9),
lpfc_get_enc_info(9), lpfc_get_node_by_target(9),
lpfc_get_starget_port_id(9), lpfc_get_starget_node_name(9),
lpfc_get_starget_port_name(9), lpfc_set_vport_symbolic_name(9),
lpfc_hba_log_verbose_init(9), lpfc_get_hba_function_mode(9),
lpfc_get_cfgparam(9), lpfc_nvme_mod_param_dep(9),
lpfc_get_vport_cfgparam(9)

mwah 💋 source/version is ./drivers/scsi/lpfc, dated October 2026, and the page is lpfc_set_rport_loss_tmo(9) — bye bestie, go slay some rports 🫶✨