📦 linux-manual

L (continued)

• libfcoe_device_notification(9)Handler for net device events✨
• libfcoe_exit(9)Tear down libfcoe.ko✨
• libfcoe_init(9)Initialization routine for libfcoe.ko✨
• libie_aq_fwlog_get(9)Get the current firmware logging configuration (0xFF32)✨
• libie_aq_fwlog_register(9)Register PF for firmware logging events (0xFF31)✨
• libie_aq_fwlog_set(9)Set FW logging configuration AQ command (0xFF30)✨
• libie_aq_str(9)get error string based on aq error✨
• libie_cp_alloc_desc_mem(9)allocate DMA memory for descriptor ring✨
• libie_cp_can_send_onstack(9)can a message be sent using a stack variable✨
• libie_cp_free_desc_mem(9)free the previously allocated descriptor DMA memory✨
• libie_cp_map_dma_mem(9)map a given virtual address for DMA✨
• libie_cp_unmap_dma_mem(9)unmap previously mapped DMA address✨
• libie_ctlq_add(9)add one control queue✨
• libie_ctlq_alloc_queue_res(9)allocate memory for descriptor ring and bufs✨
• libie_ctlq_alloc_tx_msgs(9)Allocate Tx control queue messages✨
• libie_ctlq_dealloc_ring_res(9)free memory allocated for control queue✨
• libie_ctlq_deinit(9)destroy all control queues✨
• libie_ctlq_fill_rx_msg(9)fill in a message from Rx descriptor and buffer✨
• libie_ctlq_free_fq(9)free fill queue resources, including buffers✨
• libie_ctlq_free_tx_msgs(9)Free Tx control queue messages✨
• libie_ctlq_init(9)main initialization routine for all control queues✨
• libie_ctlq_init_fq(9)initialize fill queue for an Rx controlq✨
• libie_ctlq_init_regs(9)Initialize control queue registers✨
• libie_ctlq_post_rx_buffs(9)post buffers to descriptor ring✨
• libie_ctlq_prep_rx_desc(9)prepare the descriptor with a new address✨
• libie_ctlq_recv(9)receive control queue messages✨
• libie_ctlq_release_rx_buf(9)Release Rx buffer for a specific control queue✨
• libie_ctlq_remove(9)deallocate and remove specified control queue✨
• libie_ctlq_send(9)send a message to Control Plane or Peer✨
• libie_ctlq_send_clean(9)cleanup the send control queue message buffers✨
• libie_ctlq_send_desc_avail(9)get number of free descriptors on a Tx ctlq✨
• libie_ctlq_tx_desc_from_msg(9)initialize a Tx descriptor from a message✨
• libie_ctlq_xn_deinit(9)deallocate and free the transaction manager resources✨
• libie_ctlq_xn_deinit_dma(9)free the DMA memory allocated for send messages✨
• libie_ctlq_xn_init(9)initialize the Xn transaction manager✨
• libie_ctlq_xn_init_dma(9)pre-allocate DMA memory for send messages that use stack variables✨
• libie_ctlq_xn_pop_free(9)get a free Xn entry from the free list✨
• libie_ctlq_xn_process_recv(9)process Xn data in receive message✨
• libie_ctlq_xn_process_send(9)process and send a control queue message✨
• libie_ctlq_xn_push_free(9)push a Xn entry into the free list✨
• libie_ctlq_xn_recv(9)process control queue receive message✨
• libie_ctlq_xn_rel_tx_buf(9)release xn-controlled Tx message buffer✨
• libie_ctlq_xn_send(9)send a control queue message, initiating a transaction✨
• libie_ctlq_xn_send_clean(9)clean xn-controlled Tx messages✨
• libie_ctlq_xn_shutdown(9)terminate control queue transactions✨
• libie_debugfs_data_read(9)read from 'data' file✨
• libie_debugfs_data_write(9)write into 'data' file✨
• libie_debugfs_enable_read(9)read from 'enable' file✨
• libie_debugfs_enable_write(9)write into 'enable' file✨
• libie_debugfs_fwlog_init(9)setup the debugfs directory✨
• libie_debugfs_log_size_read(9)read from 'log_size' file✨
• libie_debugfs_log_size_write(9)write into 'log_size' file✨
• libie_debugfs_module_show(9)read from 'module' file✨
• libie_debugfs_module_write(9)write into 'module' file✨
• libie_debugfs_nr_messages_read(9)read from 'nr_messages' file✨
• libie_debugfs_nr_messages_write(9)write into 'nr_messages' file✨
• libie_find_ctlq(9)find the controlq for the given id and type✨
• libie_find_mmio_region(9)find MMIO region containing a range✨
• libie_fwlog_deinit(9)unroll FW logging configuration✨
• libie_fwlog_init(9)Initialize FW logging configuration✨
• libie_fwlog_print_module_cfg(9)print current FW logging module configuration✨
• libie_fwlog_realloc_rings(9)reallocate the FW log rings✨
• libie_fwlog_register(9)Register the PF for firmware logging✨
• libie_fwlog_set(9)Set the firmware logging settings✨
• libie_fwlog_set_supported(9)Set if FW logging is supported by FW✨
• libie_fwlog_supported(9)Cached for whether FW supports FW logging or not✨
• libie_fwlog_unregister(9)Unregister the PF from firmware logging✨
• libie_get_fwlog_data(9)copy the FW log data from ARQ event✨
• libie_pci_init_dev(9)enable and configure the device✨
• libie_pci_unmap_all_mmio_regions(9)unmap all PCI device MMIO regions✨
• libie_pci_unmap_fltr_regs(9)unmap selected PCI device MMIO regions✨
• libie_rx_pt_parse(9)convert HW packet type to software bitfield structure✨
• libie_xn_check_async_timeout(9)Check for asynchronous message timeouts✨
• Life cycle(9)✨
• Life cycle of the Operational mode(9)✨
• Life cycle of the transport layer(9)✨
• limit_nareas(9)get the maximum number of areas for a given memory pool size✨
• Linear io iterator(9)✨
• linear_anon_page_index(9)Determine the absolute anonymous page offset of @address within @vma.✨
• linear_page_delta(9)Determine the relative page offset of @address within @vma.✨
• linear_page_index(9)Determine the absolute page offset of @address within @vma.✨
• linear_range_get_max_value(9)return the largest value in a range✨
• linear_range_get_selector_high(9)return linear range selector for value✨
• linear_range_get_selector_high_array(9)return linear range selector for value✨
• linear_range_get_selector_low(9)return linear range selector for value✨
• linear_range_get_selector_low_array(9)return linear range selector for value✨
• linear_range_get_selector_within(9)return linear range selector for value✨
• linear_range_get_value(9)fetch a value from given range✨
• linear_range_get_value_array(9)fetch a value from array of ranges✨
• linear_range_values_in_range(9)return the amount of values in a range✨
• linear_range_values_in_range_array(9)return the amount of values in ranges✨
• linedisp_attach(9)attach a character line display✨
• linedisp_detach(9)detach a character line display✨
• linedisp_display(9)set the message to be displayed✨
• linedisp_register(9)register a character line display✨
• linedisp_scroll(9)scroll the display by a character✨
• linedisp_unregister(9)unregister a character line display✨
• Link training(9)✨
• link_css_set(9)a helper function to link a css_set to a cgroup✨
• link_detect_connection_type_analog(9)Determines if an analog sink is connected.✨
• link_detect_dac_load_detect(9)Performs DAC load detection.✨
• link_detect_ddc_probe(9)Probe the DDC to see if a display is connected.✨
• link_detect_evaluate_edid_header(9)Evaluate if an EDID header is acceptable.✨
• link_get_ddc_aux_inst(9)Return the AUX/DDC hardware instance for a link.✨
• link_prepare_wakeup(9)prepare users for wakeup after congestion✨
• link_recovery_reset(9)reset the link recovery state✨
• link_report(9)show link status and link speed/duplex✨
• link_retransmit_failure(9)Detect repeated retransmit failures✨
• link_schedule_user(9)schedule a message sender for wakeup after congestion✨
• link_start(9)enable a port✨
• link_stat_timer_handler(9)schedule work obtaining mac address and link status✨
• link_status_event_handler(9)link event handler✨
• link_to_linux_err(9)Translates an 802.15.4 return code into the closest linux error✨
• linkmode_adv_to_fiber_adv_t(9)✨
• linkmode_adv_to_lcl_adv_t(9)✨
• linkmode_adv_to_mii_10base_t1_t(9)✨
• linkmode_adv_to_mii_10gbt_adv_t(9)✨
• linkmode_adv_to_mii_adv_t(9)✨
• linkmode_adv_to_mii_adv_x(9)encode a linkmode to config_reg✨
• linkmode_adv_to_mii_ctrl1000_t(9)✨
• linkmode_adv_to_mii_t1_adv_l_t(9)✨
• linkmode_adv_to_mii_t1_adv_m_t(9)✨
• linkmode_resolve_pause(9)resolve the allowable pause modes✨
• linkmode_set_pause(9)set the pause mode advertisement✨
• linkmode_to_mii_eee_cap1_t(9)✨
• linkmode_to_mii_eee_cap2_t(9)✨
• linkwatch_sync_dev(9)sync linkwatch for the given device✨
• lio_delete_glists(9)Delete gather lists✨
• lio_setup_glists(9)Setup gather lists✨
• lio_sync_octeon_time(9)send latest localtime to octeon firmware so that firmware will correct it's time, in case there is a time skew✨
• liquidio_change_mtu(9)Net device change_mtu✨
• liquidio_deinit_pci(9)unregister PCI driver✨
• liquidio_destroy_nic_device(9)Destroy NIC device interface✨
• liquidio_exit(9)Exits the module✨
• liquidio_fix_features(9)Net device fix features✨
• liquidio_init(9)Entry point for the liquidio module✨
• liquidio_init_nic_module(9)initialize the NIC✨
• liquidio_init_pci(9)register PCI driver✨
• liquidio_legacy_intr_handler(9)Interrupt handler for octeon✨
• liquidio_napi_drv_callback(9)callback when receive interrupt occurs and we are in NAPI mode✨
• liquidio_napi_poll(9)Entry point for NAPI polling✨
• liquidio_open(9)Net device open for LiquidIO✨
• liquidio_pcie_error_detected(9)called when PCI error is detected✨
• liquidio_pcie_mmio_enabled(9)mmio handler✨
• liquidio_pcie_resume(9)called when traffic can start flowing again.✨
• liquidio_pcie_slot_reset(9)called after the pci bus has been reset.✨
• liquidio_probe(9)PCI probe handler✨
• liquidio_ptp_adjfine(9)Adjust ptp frequency✨
• liquidio_ptp_adjtime(9)Adjust ptp time✨
• liquidio_ptp_enable(9)Check if PTP is enabled✨
• liquidio_ptp_gettime(9)Get hardware clock time, including any adjustment✨
• liquidio_ptp_init(9)Init PTP clock✨
• liquidio_ptp_settime(9)Set hardware clock time. Reset adjustment✨
• liquidio_push_packet(9)Routine to push packets arriving on Octeon interface upto network layer.✨
• liquidio_remove(9)Cleans up resources at unload time✨
• liquidio_schedule_droq_pkt_handlers(9)Droq packet processor sceduler✨
• liquidio_set_features(9)Net device set features✨
• liquidio_set_mac(9)Net device set_mac_address✨
• liquidio_set_mcast_list(9)Net device set_multicast_list✨
• liquidio_set_rxcsum_command(9)Sending command to enable/disable RX checksum offload✨
• liquidio_setup_io_queues(9)Setup input and output queues✨
• liquidio_stop(9)jNet device stop for LiquidIO✨
• liquidio_stop_nic_module(9)Stop complete NIC functionality✨
• liquidio_tx_timeout(9)Network device Tx timeout✨
• liquidio_vf_probe(9)PCI probe handler✨
• liquidio_vf_remove(9)Cleans up resources at unload time✨
• liquidio_vxlan_port_command(9)Sending command to add/delete VxLAN UDP port to firmware✨
• liquidio_xmit(9)Transmit networks packets to the Octeon interface✨
• lirc_raw_event(9)Send raw IR data to lirc to be relayed to userspace✨
• lirc_scancode_event(9)Send scancode data to lirc to be relayed to userspace. This can be called in atomic context.✨
• lis3lv02d_acpi_init(9)initialize the device for ACPI✨
• lis3lv02d_acpi_read(9)ACPI ALRD method: read a register✨
• lis3lv02d_acpi_write(9)ACPI ALWR method: write to a register✨
• lis3lv02d_get_axis(9)For the given axis, give the value converted✨
• lis3lv02d_get_xyz(9)Get X, Y and Z axis values from the accelerometer✨
• list_add(9)add a new entry✨
• list_add_rcu(9)add a new entry to rcu-protected list✨
• list_add_tail(9)add a new entry✨
• list_add_tail_rcu(9)add a new entry to rcu-protected list✨
• list_add_tail_release(9)add a new entry with release barrier✨
• list_bidir_del_rcu(9)deletes entry from list without re-initialization✨
• list_bulk_move_tail(9)move a subsection of a list to its tail✨
• list_count_nodes(9)count nodes in the list✨
• list_cut_before(9)cut a list into two, before given entry✨
• list_cut_position(9)cut a list into two✨
• list_del(9)deletes entry from list.✨
• list_del_init(9)deletes entry from list and reinitialize it.✨
• list_del_init_careful(9)deletes entry from list and reinitialize it.✨
• list_del_range(9)deletes range of entries from list.✨
• list_del_rcu(9)deletes entry from list without re-initialization✨
• list_empty(9)tests whether a list is empty✨
• list_empty_careful(9)tests whether a list is empty and not being modified✨
• list_entry(9)get the struct for this entry✨
• list_entry_is_head(9)test if the entry points to the head of the list✨
• list_entry_lockless(9)get the struct for this entry✨
• list_entry_rcu(9)get the struct for this entry✨
• list_find_cmd(9)test for presence of a command in a linked list✨
• list_first_entry(9)get the first element from a list✨
• list_first_entry_or_null(9)get the first element from a list✨
• list_first_entry_or_null_acquire(9)get the first element from a list with barrier✨