📦 linux-manual

I (continued)

• ima_file_free(9)called on __fput()✨
• ima_file_hash(9)return a measurement of the file✨
• ima_file_mmap(9)based on policy, collect/store measurement.✨
• ima_file_mprotect(9)based on policy, limit mprotect change✨
• ima_free_kexec_buffer(9)free memory used by the IMA buffer✨
• ima_get_action(9)appraise & measure decision based on policy.✨
• ima_get_kexec_buffer(9)get IMA buffer from the previous kernel✨
• ima_iint_find(9)Return the iint associated with an inode✨
• ima_init_policy(9)initialize the default measure rules.✨
• ima_inode_free_rcu(9)Called to free an inode via a RCU callback✨
• ima_inode_get(9)Find or allocate an iint associated with an inode✨
• ima_inode_hash(9)return the stored measurement if the inode has been hashed and is in the iint cache.✨
• ima_inode_post_setattr(9)reflect file metadata changes✨
• ima_kernel_module_request(9)Prevent crypto-pkcs1(rsa,*) requests✨
• ima_kexec_cmdline(9)measure kexec cmdline boot args✨
• ima_load_data(9)appraise decision based on policy✨
• ima_match_policy(9)decision based on LSM and other conditions✨
• ima_match_rule_data(9)determine whether func_data matches the policy rule✨
• ima_match_rules(9)determine whether an inode matches the policy rule.✨
• ima_measure_critical_data(9)measure kernel integrity critical data✨
• ima_measure_loaded_policy(9)measure the active IMA policy ruleset✨
• ima_measure_raw_policy(9)Measure the raw policy write buffer✨
• ima_parse_add_rule(9)add a rule to ima_policy_rules✨
• ima_parse_buf(9)Parses lengths and data from an input buffer✨
• ima_post_create_tmpfile(9)mark newly created tmpfile as new✨
• ima_post_key_create_or_update(9)measure asymmetric keys✨
• ima_post_load_data(9)appraise decision based on policy✨
• ima_post_path_mknod(9)mark as a new inode✨
• ima_post_read_file(9)in memory collect/appraise/audit measurement✨
• ima_queue_delete(9)Delete measurements✨
• ima_queue_delete_partial(9)Delete current measurements✨
• ima_queue_stage(9)Stage all measurements✨
• ima_queue_staged_delete_all(9)Delete staged measurements✨
• ima_read_file(9)pre-measure/appraise hook decision based on policy✨
• ima_template_has_modsig(9)Check whether template has modsig-related fields.✨
• ima_update_policy(9)update default_rules with new measure rules✨
• ima_update_policy_flags(9)Update global IMA variables✨
• Image load info flags(9)✨
• imem_get_device_sleep_state(9)Get the device sleep state value.✨
• img_ascii_lcd_probe(9)probe an LCD display device✨
• img_ascii_lcd_remove(9)remove an LCD display device✨
• img_ir_allowed_protos(9)Get allowed protocols from global decoder list.✨
• img_ir_control(9)Convert control struct to control register value.✨
• img_ir_decoder_compatible(9)Find whether a decoder will work with a device.✨
• img_ir_decoder_convert(9)Generate internal timings in decoder.✨
• img_ir_decoder_preprocess(9)Preprocess timings in decoder.✨
• img_ir_disable_wake(9)Switch out of wake mode.✨
• img_ir_enable_wake(9)Switch to wake mode.✨
• img_ir_free_timing(9)Convert free time timing struct to register value.✨
• img_ir_free_timing_dynamic(9)Update free time register value.✨
• img_ir_probe_hw_caps(9)Probe capabilities of the hardware.✨
• img_ir_set_decoder(9)Set the current decoder.✨
• img_ir_symbol_timing(9)Convert symbol timing struct to register value.✨
• img_ir_timing_range_convert(9)Convert microsecond range.✨
• img_ir_timings_convert(9)Convert timings to register values✨
• img_ir_write_timings(9)Write timings to the hardware now✨
• imgu_css_pool_last(9)Retrieve the nth pool entry from last✨
• imgu_dmamap_alloc(9)allocate and map a buffer into KVA✨
• imgu_mmu_alloc_page_table(9)allocate a pre-filled page table✨
• imgu_mmu_exit(9)clean up IPU3 MMU block✨
• imgu_mmu_free_page_table(9)free page table✨
• imgu_mmu_init(9)initialize IPU3 MMU block✨
• imgu_mmu_map(9)map a buffer to a physical address✨
• imgu_mmu_map_sg(9)Map a scatterlist✨
• imgu_mmu_set_halt(9)set CIO gate halt bit✨
• imgu_mmu_tlb_invalidate(9)invalidate translation look-aside buffer✨
• imgu_mmu_unmap(9)Unmap a buffer✨
• Implementation Status(9)✨
• implementing nonblocking commit(9)✨
• implicit fence polling(9)✨
• import_iovec(9)Copy an array of &struct iovec from userspace into the kernel, check that it is valid, and initialize a new &struct iov_iter iterator to access it.✨
• imr_add_range(9)add an Isolated Memory Region.✨
• imr_address_overlap(9)detects an address overlap.✨
• imr_check_params(9)check passed address range IMR alignment and non-zero size✨
• imr_clear(9)delete an Isolated Memory Region by index✨
• imr_dbgfs_state_show(9)print state of IMR registers.✨
• imr_debugfs_register(9)register debugfs hooks.✨
• imr_fixup_memmap(9)Tear down IMRs used during bootup.✨
• imr_init(9)entry point for IMR driver.✨
• imr_is_enabled(9)true if an IMR is enabled false otherwise.✨
• imr_raw_size(9)account for the IMR_ALIGN bytes that addr_hi appends.✨
• imr_read(9)read an IMR at a given index.✨
• imr_remove_range(9)delete an Isolated Memory Region by address✨
• imr_self_test(9)perform the IMR self-test✨
• imr_self_test_init(9)entry point for IMR driver.✨
• imr_self_test_result(9)Print result string for self test.✨
• imr_write(9)write an IMR at a given index.✨
• imx274_load_default(9)load default control values✨
• imx274_read_mbreg(9)Read a multibyte register.✨
• imx274_write_mbreg(9)Write a multibyte register.✨
• imx334_detect(9)Detect imx334 sensor✨
• imx334_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
• imx334_init_controls(9)Initialize sensor subdevice controls✨
• imx334_parse_hw_config(9)Parse HW configuration and check if supported✨
• imx334_update_controls(9)Update control ranges based on streaming mode✨
• imx334_update_exp_gain(9)Set updated exposure and gain✨
• imx335_detect(9)Detect imx335 sensor✨
• imx335_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
• imx335_init_controls(9)Initialize sensor subdevice controls✨
• imx335_parse_hw_config(9)Parse HW configuration and check if supported✨
• imx335_power_on(9)Sensor power on sequence✨
• imx335_update_controls(9)Update control ranges based on streaming mode✨
• imx335_update_exp_gain(9)Set updated exposure and gain✨
• imx412_detect(9)Detect imx412 sensor✨
• imx412_disable_streams(9)Enable specified streams for the sensor✨
• imx412_enable_streams(9)Enable specified streams for the sensor✨
• imx412_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
• imx412_init_controls(9)Initialize sensor subdevice controls✨
• imx412_parse_hw_config(9)Parse HW configuration and check if supported✨
• imx412_update_controls(9)Update control ranges based on streaming mode✨
• imx412_update_exp_gain(9)Set updated exposure and gain✨
• imx8_dump(9)This function is called when a panic message is received from the firmware.✨
• imx8_get_registers(9)This function is called in case of DSP oops in order to gather information about the registers, filename and linenumber and stack.✨
• imx_dsp_attach_pm_domains(9)attach the power domains✨
• imx_dsp_rproc_add_carveout(9)request mailbox channels✨
• imx_dsp_rproc_detect_mode(9)detect DSP control mode✨
• imx_dsp_rproc_handle_rsc(9)Handle DSP-specific resource table entries✨
• imx_dsp_rproc_mbox_alloc(9)request mailbox channels✨
• imx_dsp_rproc_rx_tx_callback(9)inbound mailbox message handler✨
• imx_dsp_rproc_rxdb_callback(9)inbound mailbox message handler✨
• imx_dsp_rproc_sys_to_da(9)internal memory translation helper✨
• In-Field Scan(9)✨
• in4_pton(9)convert an IPv4 address from literal to binary representation✨
• in6_dev_get(9)get inet6_dev pointer from netdevice✨
• in6_pton(9)convert an IPv6 address from literal to binary representation✨
• in_circular_range(9)Helper function to check if a value is within the range of two numbers (circular range)✨
• in_cyclic_range(9)Check whether the given value is between the lower and upper bounds, within a cyclic range of values from 0 to (modulus - 1).✨
• in_flight_show(9)number of I/Os currently in flight - in most cases this will be either 0 or 1. It may be higher if someone has also issued other SCSI commands such as via an ioctl.✨
• in_group_or_capable(9)check whether caller is CAP_FSETID privileged✨
• in_pq(9)check if a wear-leveling entry is present in the protection queue.✨
• in_range(9)Determine if a value lies within a range.✨
• in_wl_tree(9)check if wear-leveling entry is present in a WL RB-tree.✨
• inc_ep_stats_bytes(9)Update ep stats counts✨
• inc_ep_stats_reqs(9)Update ep stats counts✨
• inc_nlink(9)directly increment an inode's link count✨
• increment_for_block_map(9)Increment the reference count for a block map page.✨
• increment_for_data(9)Increment the reference count for a data block.✨
• increment_generation(9)Increment the flush generation in a logical zone.✨
• increment_stat(9)Increment a statistic counter in a non-atomic yet thread-safe manner.✨
• INDEX(9)✨
• INDIO_BUFFER_FLAG_FIXED_WATERMARK(9)Watermark level of the buffer can not be configured. It has a fixed value which will be buffer specific.✨
• inet6_lookup_reuseport(9)execute reuseport logic on AF_INET6 socket if necessary.✨
• inet_csk_clone_lock(9)clone an inet socket, and lock its clone✨
• inet_lookup_reuseport(9)execute reuseport logic on AF_INET socket if necessary.✨
• inet_proto_csum_replace16(9)update layer 4 header checksum field✨
• inet_pton_with_scope(9)convert an IPv4/IPv6 and port to socket address✨
• inet_sk_get_local_port_range(9)fetch ephemeral ports range✨
• inet_sk_state_load(9)read sk->sk_state for lockless contexts✨
• inet_sk_state_store(9)update sk->sk_state✨
• inet_twsk_bind_unhash(9)unhash a timewait socket from bind hash✨
• infof(9)Store supplementary informational message✨
• Infrastructure calls(9)✨
• ingenic_cgu_gate_get(9)get the value of clock gate register bit✨
• ingenic_cgu_gate_set(9)set the value of clock gate register bit✨
• ingenic_cgu_new(9)create a new CGU instance✨
• ingenic_cgu_register_clocks(9)Registers the clocks✨
• ingenic_ecc_calculate(9)calculate ECC for a data buffer✨
• ingenic_ecc_correct(9)detect and correct bit errors✨
• ingenic_ecc_get(9)get the ECC controller device✨
• ingenic_ecc_release(9)release the ECC controller device✨
• inherit_flags(9)inherit flags of the parent inode.✨
• inia100_build_scb(9)build SCB✨
• inia100_intr(9)interrupt handler✨
• inia100_queue_lck(9)queue command with host✨
• inia100_scb_handler(9)interrupt callback✨
• Init, G2H-event and reporting flows for GuC-error-capture(9)✨
• init_after_reset(9)re-initialize after a reset✨
• init_alloc_map(9)initialise allocation map✨
• init_apic_mappings(9)initialize APIC mappings✨
• init_bios_attributes(9)Initialize all attributes for a type✨
• init_chained_smb2_rsp(9)initialize smb2 chained response✨
• init_clock_voltage_dependency(9)Private Function used during initialization. Initialize clock voltage dependency✨
• init_cmdq(9)initialize cmdq✨
• init_cmdqs_ctxt(9)write the cmdq ctxt to HW after init all cmdq✨
• init_completion(9)Initialize a dynamically allocated completion✨
• init_cong_ctrl(9)initialize congestion control parameters✨
• init_constants_early(9)initialize UBIFS constants.✨
• init_csrows(9)Initialize the csrow data.✨
• init_default_table_values(9)init the default table.✨
• init_dinode(9)Fill in a new dinode structure✨
• init_display(9)initialize the display controller✨
• init_dma_desc_rings(9)init the RX/TX descriptor rings✨
• init_dma_pools(9)create dma pools during initialization✨
• init_dpm_2_parameters(9)Private Function used during initialization. Initialize TDP limits for DPM2✨
• init_eq(9)initialize Event Queue✨
• INIT_ERR_PTR(9)Init a const error pointer.✨
• init_event_struct(9)Initialize fields in an event struct that are always required.✨
• init_flow_control_register(9)set up flow control✨
• init_fp_ctx(9)Initialize task FP context✨
• init_fsm(9)Creates a finite state machine✨
• init_fw_context(9)Initializes the queue part of a FW context.✨
• init_fw_ctxt(9)Init Firmware tables before network mgmt and io operations✨
• init_gfs2_fs(9)Register GFS2 as a filesystem✨
• init_gpio_reset(9)register GPIO as reset generator✨
• init_hw(9)initialize the I2C hardware✨
• init_idle(9)set up an idle thread for a given CPU✨
• init_inode_smack(9)initialize an inode security blob✨
• INIT_KFIFO(9)Initialize a fifo declared by DECLARE_KFIFO✨
• init_ladder(9)initializes the governor✨
• init_link_config(9)initialize a link's SW state✨