section 9 · Kernel routines 🧠

87928 pages · page 23 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

A (continued)

asn1_encode_boolean(9)encode a boolean value to ASN.1✨
asn1_encode_integer(9)encode positive integer to ASN.1✨
asn1_encode_length(9)encode a length to follow an ASN.1 tag✨
asn1_encode_octet_string(9)encode an ASN.1 OCTET STRING✨
asn1_encode_oid(9)encode an oid to ASN.1✨
asn1_encode_sequence(9)wrap a byte stream in an ASN.1 SEQUENCE✨
asn1_encode_tag(9)add a tag for optional or explicit value✨
ASPEED GFX Driver(9)✨
aspeed_disable_sig(9)Disable a signal on a pin by disabling all provided signal expressions.✨
aspeed_find_expr_by_name(9)Search for the signal expression needed to enable the pin's signal for the requested function.✨
aspeed_g5_sig_expr_set(9)Configure a pin's signal by applying an expression's descriptor state for all descriptors in the expression.✨
aspeed_g6_sig_expr_set(9)Configure a pin's signal by applying an expression's descriptor state for all descriptors in the expression.✨
aspeed_gpio_copro_grab_gpio(9)Mark a GPIO used by the coprocessor. The entire bank gets marked and any access from the ARM will result in handshaking via callbacks.✨
aspeed_gpio_copro_release_gpio(9)Unmark a GPIO used by the coprocessor.✨
aspeed_gpio_copro_set_ops(9)Sets the callbacks used for handshaking with the coprocessor for shared GPIO banks✨
aspeed_intc0_resolve_route(9)Determine the necessary interrupt output at intc1✨
aspeed_intc_populate_ranges(9)✨
aspeed_sig_desc_eval(9)Query the enabled or disabled state of a signal descriptor.✨
aspeed_sig_expr_eval(9)Query the enabled or disabled state for a mux function's signal on a pin✨
aspm (int)(9)✨
asrc_read_last_fifo(9)read all the remaining data from FIFO✨
ASSERT_EQ(9)✨
ASSERT_EXCLUSIVE_ACCESS(9)assert no concurrent accesses to @var✨
ASSERT_EXCLUSIVE_ACCESS_SCOPED(9)assert no concurrent accesses to @var in scope✨
ASSERT_EXCLUSIVE_BITS(9)assert no concurrent writes to subset of bits in @var✨
ASSERT_EXCLUSIVE_WRITER(9)assert no concurrent writes to @var✨
ASSERT_EXCLUSIVE_WRITER_SCOPED(9)assert no concurrent writes to @var in scope✨
ASSERT_FALSE(9)✨
ASSERT_GE(9)✨
ASSERT_GT(9)✨
assert_hash_lock_agent(9)Assert that a data_vio is the agent of its hash lock, and that this is being called in the hash zone.✨
assert_in_bio_zone(9)Assert that a vio is in the correct bio zone and not in interrupt context.✨
ASSERT_LE(9)✨
ASSERT_LT(9)✨
ASSERT_MEM_EQ(9)Check that the first @_size bytes of @_seen are all equal to @_expected. If false, print failed test message (if running with --verbose) and then assert.✨
ASSERT_MEM_NE(9)Check that none of the first @_size bytes of @_seen are equal to @_expected. If false, print failed test message (if running with --verbose) and then assert.✨
ASSERT_NE(9)✨
ASSERT_NULL(9)✨
assert_on_cache_thread(9)Assert that a function has been called on the VDO page cache's thread.✨
assert_on_flusher_thread(9)Check that we are on the flusher thread.✨
assert_on_journal_thread(9)Assert that we are running on the journal thread.✨
assert_on_packer_thread(9)Check that we are on the packer thread.✨
ASSERT_STREQ(9)✨
ASSERT_STRNE(9)✨
ASSERT_TRUE(9)✨
assert_vdo_drain_operation(9)Check that an operation is a drain.✨
assert_vdo_resume_operation(9)Check whether an admin_state_code is a resume operation.✨
assert_vio_in_bio_zone(9)Check that a vio is running on the correct thread for its bio zone.✨
assign_adapter_store(9)parses the APID from @buf and sets the corresponding bit in the mediated matrix device's APM✨
assign_aeb_to_av(9)assigns a SEB to a given ainf_volume and removes it from it's original list.✨
assign_bit(9)Assign value to a bit in memory✨
assign_control_domain_store(9)parses the domain ID from @buf and sets the corresponding bit in the mediated matrix device's ADM✨
assign_domain_store(9)parses the APQI from @buf and sets the corresponding bit in the mediated matrix device's AQM✨
assign_entry(9)Assign an entry waiter to the active block.✨
assign_requested_resources_sorted(9)Satisfy resource requests✨
assign_work(9)assign a work item and its linked work items to a worker✨
assoc_array_apply_edit(9)Apply an edit script to an associative array✨
assoc_array_cancel_edit(9)Discard an edit script.✨
assoc_array_clear(9)Script deletion of all objects from an associative array✨
assoc_array_delete(9)Script deletion of an object from an associative array✨
assoc_array_destroy(9)Destroy an associative array✨
assoc_array_find(9)Find an object by index key✨
assoc_array_gc(9)Garbage collect an associative array.✨
assoc_array_insert(9)Script insertion of an object into an associative array✨
assoc_array_insert_set_object(9)Set the new object pointer in an edit script✨
assoc_array_iterate(9)Pass all objects in the array to a callback✨
asus_wmi_get_devstate_dsts(9)Get the WMI function state.✨
asus_wmi_set_devstate(9)Set the WMI function state.✨
asymmetric_key_generate_id(9)Construct an asymmetric key ID✨
asymmetric_key_hex_to_key_id(9)Convert a hex string into a key ID.✨
asymmetric_key_id_partial(9)Return true if two asymmetric keys IDs partially match✨
asymmetric_key_id_same(9)Return true if two asymmetric keys IDs are the same.✨
asymmetric_key_subtype(9)Get the subtype from an asymmetric key✨
asymmetric_match_key_ids(9)Search asymmetric key IDs 1 & 2✨
asymmetric_verify_common(9)- sigv2 and sigv3 common verify function✨
asymmetric_verify_v3_hashless(9)Use hashless signature verification on sigv3✨
async_callback_t(9)A type definition for an asynchronous callback function.✨
async_gen_syndrome(9)asynchronously calculate a raid6 syndrome✨
async_gfx_ring (int)(9)✨
async_memcpy(9)attempt to copy memory with a dma engine.✨
async_raid6_2data_recov(9)asynchronously calculate two missing data blocks✨
async_raid6_datap_recov(9)asynchronously calculate a data and the 'p' block✨
async_release(9)Process QTEE async release requests.✨
async_schedule(9)schedule a function for asynchronous execution✨
async_schedule_dev(9)A device specific version of async_schedule✨
async_schedule_dev_domain(9)A device specific version of async_schedule_domain✨
async_schedule_dev_nocall(9)A simplified variant of async_schedule_dev()✨
async_schedule_domain(9)schedule a function for asynchronous execution within a certain domain✨
async_schedule_node(9)NUMA specific version of async_schedule✨
async_schedule_node_domain(9)NUMA specific version of async_schedule_domain✨
async_synchronize_cookie(9)synchronize asynchronous function calls with cookie checkpointing✨
async_synchronize_cookie_domain(9)synchronize asynchronous function calls within a certain domain with cookie checkpointing✨
async_synchronize_full(9)synchronize all asynchronous function calls✨
async_synchronize_full_domain(9)synchronize all asynchronous function within a certain domain✨
async_syndrome_val(9)asynchronously validate a raid6 syndrome✨
async_trigger_callback(9)schedules the callback function to be run✨
async_tx_channel_switch(9)queue an interrupt descriptor with a dependency pre-attached.✨
async_tx_issue_pending(9)send pending descriptor to the hardware channel✨
async_tx_quiesce(9)ensure tx is complete and freeable upon return✨
async_tx_sync_epilog(9)actions to take if an operation is run synchronously✨
async_xor(9)attempt to xor a set of blocks with a dma engine.✨
async_xor_offs(9)attempt to xor a set of blocks with a dma engine.✨
async_xor_val_offs(9)attempt a xor parity check with a dma engine.✨
Asynchronous AEAD Request Handle(9)✨
Asynchronous Compression API(9)✨
asynchronous flip implementation(9)✨
Asynchronous Hash Request Handle(9)✨
Asynchronous Message Digest API(9)✨
at91_mailbox_read(9)read CAN msg from mailbox✨
at91_pm_switch_ba_to_auto(9)Configure Backup Unit Power Switch to automatic/hardware mode.✨
at91_rx_overflow_err(9)send error frame due to rx overflow✨
at_dma_off(9)disable DMA controller✨
at_pid(9)obsolete pid HAL component✨
ata_acpi_cbl_pata_type(9)Return PATA cable type✨
ata_acpi_dev_manage_restart(9)if the disk should be stopped (spun down) on system restart.✨
ata_acpi_dissociate(9)dissociate ATA host from ACPI objects✨
ata_acpi_exec_tfs(9)get then write drive taskfile settings✨
ata_acpi_gtm(9)execute _GTM✨
ata_acpi_gtm_xfermask(9)determine xfermode from GTM parameter✨
ata_acpi_handle_hotplug(9)ACPI event handler backend✨
ata_acpi_on_devcfg(9)ATA ACPI hook called on device donfiguration✨
ata_acpi_on_disable(9)ATA ACPI hook called when a device is disabled✨
ata_acpi_on_resume(9)ATA ACPI hook called on resume✨
ata_acpi_port_power_on(9)set the power state of the ata port to D0✨
ata_acpi_push_id(9)send Identify data to drive✨
ata_acpi_run_tf(9)send taskfile registers to host controller✨
ata_acpi_set_state(9)set the port power state✨
ata_acpi_stm(9)execute _STM✨
ata_bmdma_dumb_qc_prep(9)Prepare taskfile for submission✨
ata_bmdma_error_handler(9)Stock error handler for BMDMA controller✨
ata_bmdma_fill_sg(9)Fill PCI IDE PRD table✨
ata_bmdma_fill_sg_dumb(9)Fill PCI IDE PRD table✨
ata_bmdma_interrupt(9)Default BMDMA ATA host interrupt handler✨
ata_bmdma_irq_clear(9)Clear PCI IDE BMDMA interrupt.✨
ata_bmdma_port_intr(9)Handle BMDMA port interrupt✨
ata_bmdma_port_start(9)Set port up for bmdma.✨
ata_bmdma_port_start32(9)Set port up for dma.✨
ata_bmdma_post_internal_cmd(9)Stock post_internal_cmd for BMDMA✨
ata_bmdma_qc_issue(9)issue taskfile to a BMDMA controller✨
ata_bmdma_qc_prep(9)Prepare taskfile for submission✨
ata_bmdma_setup(9)Set up PCI IDE BMDMA transaction✨
ata_bmdma_start(9)Start a PCI IDE BMDMA transaction✨
ata_bmdma_status(9)Read PCI IDE BMDMA status✨
ata_bmdma_stop(9)Stop PCI IDE BMDMA transfer✨
ata_build_rw_tf(9)Build ATA taskfile for given read/write request✨
ata_cable_40wire(9)return 40 wire cable type✨
ata_cable_80wire(9)return 80 wire cable type✨
ata_cable_ignore(9)return ignored PATA cable.✨
ata_cable_sata(9)return SATA cable type✨
ata_cable_unknown(9)return unknown PATA cable.✨
ata_change_queue_depth(9)Set a device maximum queue depth✨
ata_cmd_ioctl(9)Handler for HDIO_DRIVE_CMD ioctl✨
ata_data_xfer_8bit(9)Transfer data by 8bit PIO✨
ata_dev_acpi_handle(9)provide the acpi_handle for an ata_device✨
ata_dev_classify(9)determine device type based on ATA-spec signature✨
ata_dev_configure(9)Configure the specified ATA/ATAPI device✨
ata_dev_disable(9)disable ATA device✨
ata_dev_free_resources(9)Free a device resources✨
ata_dev_get_GTF(9)get the drive bootup default taskfile settings✨
ata_dev_init(9)Initialize an ata_device structure✨
ata_dev_init_params(9)Issue INIT DEV PARAMS command✨
ata_dev_next(9)device iteration helper✨
ata_dev_pair(9)return other device on cable✨
ata_dev_phys_link(9)find physical link for a device✨
ata_dev_power_set_active(9)Set a device power mode to active✨
ata_dev_power_set_standby(9)Set a device power mode to standby✨
ata_dev_read_id(9)Read ID data from the specified device✨
ata_dev_reread_id(9)Re-read IDENTIFY data✨
ata_dev_revalidate(9)Revalidate ATA device✨
ata_dev_same_device(9)Determine whether new ID matches configured device✨
ata_dev_select(9)Select device 0/1 on ATA bus✨
ata_dev_set_feature(9)Issue SET FEATURES✨
ata_dev_set_xfermode(9)Issue SET FEATURES - XFER MODE command✨
ata_dev_xfermask(9)Compute supported xfermask of the given device✨
ata_devchk(9)PATA device presence detection✨
ata_do_dev_read_id(9)default ID read method✨
ata_down_xfermask_limit(9)adjust dev xfer masks downward✨
ata_dsm_trim_pages(9)maximum DSM TRIM payload for a device, in 512-byte pages✨
ata_dump_id(9)IDENTIFY DEVICE info debugging output✨
ata_eh_about_to_do(9)about to perform eh_action✨
ata_eh_acquire(9)acquire EH ownership✨
ata_eh_analyze_ncq_error(9)analyze NCQ error✨
ata_eh_analyze_serror(9)analyze SError for a failed port✨
ata_eh_analyze_tf(9)analyze taskfile of a failed qc✨
ata_eh_autopsy(9)analyze error and determine recovery action✨
ata_eh_decide_disposition(9)Disposition a qc based on sense data✨
ata_eh_detach_dev(9)detach ATA device✨
ata_eh_done(9)EH action complete✨
ata_eh_finish(9)finish up EH✨
ata_eh_freeze_port(9)EH helper to freeze port✨
ata_eh_get_ncq_success_sense(9)Read and process the sense data for successful NCQ commands log page✨
ata_eh_handle_port_resume(9)perform port resume operation✨
ata_eh_handle_port_suspend(9)perform port suspend operation✨
ata_eh_link_autopsy(9)analyze error and determine recovery action✨
ata_eh_link_report(9)report error handling to user✨
ata_eh_link_set_lpm(9)configure SATA interface power management✨
ata_eh_maybe_retry_flush(9)Retry FLUSH if necessary✨
ata_eh_qc_complete(9)Complete an active ATA command from EH✨
ata_eh_qc_retry(9)Tell midlayer to retry an ATA command after EH✨
ata_eh_quiet(9)check if we need to be quiet about a command error✨