📦 linux-manual

W (continued)

• w1_reply_len(9)calculate current reply length, compare to maxlen✨
• w1_reply_make_space(9)send message if needed to make space✨
• w1_reset_bus(9)Issues a reset bus sequence.✨
• w1_reset_resume_command(9)resume instead of another match ROM✨
• w1_reset_select_slave(9)reset and select a slave✨
• w1_search(9)Performs a ROM Search & registers any devices found.✨
• w1_therm_add_slave(9)Called when a new slave is discovered✨
• w1_therm_remove_slave(9)Called when a slave is removed✨
• w1_touch_bit(9)Generates a write-0 or write-1 cycle and samples the level.✨
• w1_touch_block(9)Touches a series of bytes.✨
• w1_triplet(9)* Does a triplet - used for searching ROM addresses.✨
• w1_unregister_family(9)unregister a device family driver✨
• w1_write_8(9)Writes 8 bits.✨
• w1_write_bit(9)Generates a write-0 or write-1 cycle.✨
• w1_write_block(9)Writes a series of bytes.✨
• w_e_end_data_req(9)Worker callback, to send a P_DATA_REPLY packet in response to a P_DATA_REQUEST✨
• w_e_end_rsdata_req(9)Worker callback to send a P_RS_DATA_REPLY packet in response to a P_RS_DATA_REQUEST✨
• w_send_dblock(9)Worker callback to send a P_DATA packet in order to mirror a write request✨
• w_send_read_req(9)Worker callback to send a read request (P_DATA_REQUEST) packet✨
• wait_and_poll(9)Issues a polling command✨
• wait_event(9)sleep until a condition gets true✨
• wait_event_cmd(9)sleep until a condition gets true✨
• wait_event_freezable(9)sleep (or freeze) until a condition gets true✨
• wait_event_hrtimeout(9)sleep until a condition gets true or a timeout elapses✨
• wait_event_idle(9)wait for a condition without contributing to system load✨
• wait_event_idle_exclusive(9)wait for a condition with contributing to system load✨
• wait_event_idle_exclusive_timeout(9)sleep without load until a condition becomes true or a timeout elapses✨
• wait_event_idle_timeout(9)sleep without load until a condition becomes true or a timeout elapses✨
• wait_event_interruptible(9)sleep until a condition gets true✨
• wait_event_interruptible_exclusive_locked(9)sleep exclusively until a condition gets true✨
• wait_event_interruptible_exclusive_locked_irq(9)sleep until a condition gets true✨
• wait_event_interruptible_hrtimeout(9)sleep until a condition gets true or a timeout elapses✨
• wait_event_interruptible_lock_irq(9)sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.✨
• wait_event_interruptible_lock_irq_cmd(9)sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.✨
• wait_event_interruptible_lock_irq_timeout(9)sleep until a condition gets true or a timeout elapses. The condition is checked under the lock. This is expected to be called with the lock taken.✨
• wait_event_interruptible_locked(9)sleep until a condition gets true✨
• wait_event_interruptible_locked_irq(9)sleep until a condition gets true✨
• wait_event_interruptible_timeout(9)sleep until a condition gets true or a timeout elapses✨
• wait_event_killable(9)sleep until a condition gets true✨
• wait_event_killable_timeout(9)sleep until a condition gets true or a timeout elapses✨
• wait_event_lock_irq(9)sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.✨
• wait_event_lock_irq_cmd(9)sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.✨
• wait_event_state(9)sleep until a condition gets true✨
• wait_event_timeout(9)sleep until a condition gets true or a timeout elapses✨
• wait_for_api_cmd_completion(9)wait for command to complete✨
• wait_for_commit(9)wait for commit.✨
• wait_for_completion(9)- waits for completion of a task✨
• wait_for_completion_interruptible(9)- waits for completion of a task (w/intr)✨
• wait_for_completion_interruptible_timeout(9)- waits for completion (w/(to,intr))✨
• wait_for_completion_io(9)- waits for completion of a task✨
• wait_for_completion_io_timeout(9)- waits for completion of a task (w/timeout)✨
• wait_for_completion_killable(9)- waits for completion of a task (killable)✨
• wait_for_completion_killable_timeout(9)- waits for completion of a task (w/(to,killable))✨
• wait_for_completion_timeout(9)- waits for completion of a task (w/timeout)✨
• wait_for_ct_request_update(9)Wait for CT request state update.✨
• wait_for_device_probe(9)✨
• wait_for_engine_idle(9)waits for all hardware engines to finish✨
• wait_for_init_b(9)wait for the INIT_B pin to have a given state, or wait a given delay if the pin is unavailable✨
• wait_for_init_devices_probe(9)Try to probe any device needed for init✨
• wait_for_key_construction(9)Wait for construction of a key to complete✨
• wait_for_owner_exiting(9)Block until the owner has exited✨
• wait_for_reservation(9)try queuing current task to wait until waked up.✨
• wait_for_space(9)check ring buffer free space✨
• wait_for_status_poll(9)wait for write to api cmd command to complete✨
• wait_i2c_reg(9)waits the read/write to finish✨
• wait_logical_linkstate(9)wait for an IB link state change to occur✨
• wait_on_bit(9)wait for a bit to be cleared✨
• wait_on_bit_action(9)wait for a bit to be cleared✨
• wait_on_bit_io(9)wait for a bit to be cleared✨
• wait_on_bit_lock(9)wait for a bit to be cleared, then set it✨
• wait_on_bit_lock_action(9)wait for a bit to be cleared, then set it✨
• wait_on_bit_lock_io(9)wait for a bit to be cleared, then set it✨
• wait_on_bit_timeout(9)wait for a bit to be cleared or a timeout to elapse✨
• wait_on_hash_lock(9)Add a data_vio to the lock's queue of waiters.✨
• wait_ops_state(9)Busy-wait the specified ops state to end✨
• wait_task_stopped(9)Wait for %TASK_STOPPED or %TASK_TRACED✨
• wait_var_event(9)wait for a variable to be updated and notified✨
• wait_var_event_any_lock(9)wait for a variable to be updated under a lock✨
• wait_var_event_interruptible(9)wait for a variable to be updated and notified✨
• wait_var_event_io(9)wait for a variable to be updated and notified✨
• wait_var_event_killable(9)wait for a variable to be updated and notified✨
• wait_var_event_mutex(9)wait for a variable to be updated under a mutex✨
• wait_var_event_spinlock(9)wait for a variable to be updated under a spinlock✨
• wait_var_event_timeout(9)wait for a variable to be updated or a timeout to expire✨
• WaitForDoorbellAck(9)Wait for IOC doorbell handshake acknowledge✨
• WaitForDoorbellInt(9)Wait for IOC to set its doorbell interrupt bit✨
• WaitForDoorbellReply(9)Wait for and capture an IOC handshake reply.✨
• waitqueue_active(9)- locklessly test for waiters on the queue✨
• wake_const_ops(9)wake up non-alter tasks✨
• wake_q_add(9)queue a wakeup for 'later' waking.✨
• wake_q_add_safe(9)safely queue a wakeup for 'later' waking.✨
• wake_up_all_idle_cpus(9)break all cpus out of idle wake_up_all_idle_cpus try to break all cpus which is in idle state even including idle polling cpus, for non-idle cpus, we will do nothing for them.✨
• wake_up_bit(9)wake up waiters on a bit✨
• wake_up_glock(9)Wake up waiters on a glock✨
• wake_up_klogd(9)Wake kernel logging daemon✨
• wake_up_pollfree(9)signal that a polled waitqueue is going away✨
• wake_up_process(9)Wake up a specific process✨
• wake_up_reservation(9)wake up first task in queue or stop queuing.✨
• wake_up_var(9)wake up waiters on a variable (kernel address)✨
• wake_up_var_locked(9)wake up waiters for a variable while holding a spinlock or mutex✨
• wake_up_var_protected(9)wake up waiters for a variable asserting that it is safe✨
• wakeme_after_rcu(9)Callback function to awaken a task after grace period✨
• wakeup_readers(9)wake up readers waiting on a channel✨
• wakeup_source_activate(9)Mark given wakeup source as active.✨
• wakeup_source_add(9)Add given object to the list of wakeup sources.✨
• wakeup_source_create(9)Create a struct wakeup_source object.✨
• wakeup_source_deactivate(9)Mark given wakeup source as inactive.✨
• wakeup_source_destroy(9)Destroy a struct wakeup_source object.✨
• wakeup_source_not_usable(9)validate the given wakeup source.✨
• wakeup_source_register(9)Create wakeup source and add it to the list.✨
• wakeup_source_remove(9)Remove given object from the wakeup sources list.✨
• wakeup_source_report_event(9)Report wakeup event using the given source.✨
• wakeup_source_sysfs_add(9)Add wakeup_source attributes to sysfs.✨
• wakeup_source_sysfs_remove(9)Remove wakeup_source attributes from sysfs.✨
• wakeup_source_unregister(9)Remove wakeup source from the list and remove it.✨
• wakeup_sources_read_lock(9)Lock wakeup source list for read.✨
• wakeup_sources_read_unlock(9)Unlock wakeup source list.✨
• wakeup_sources_stats_seq_show(9)Print wakeup sources statistics information.✨
• wakeup_sources_walk_next(9)Get next wakeup source from the list✨
• wakeup_sources_walk_start(9)Begin a walk on wakeup source list✨
• walk_central_bus(9)Find devices attached to the central bus✨
• walk_guest_tables(9)Walk the guest page table and pin the dat tables.✨
• walk_iomem_res_desc(9)Walks through iomem resources and calls func() with matching resource ranges. *✨
• walk_kernel_page_table_range(9)walk a range of kernel pagetables.✨
• walk_memory_blocks(9)walk through all present memory blocks overlapped by the range [start, start + size)✨
• walk_native_bus(9)- Probe a bus for devices✨
• walk_page_mapping(9)walk all memory areas mapped into a struct address_space.✨
• walk_page_range(9)walk page table with caller specific callbacks✨
• walk_page_range_debug(9)walk a range of pagetables not backed by a vma✨
• warnf(9)Store supplementary warning message✨
• Warning(9)✨
• was_new(9)Check whether the vdo was new when it was loaded.✨
• watch_sizeof(9)Calculate the information part of the size of a watch record, given the structure size.✨
• watchdog_cdev_register(9)register watchdog character device✨
• watchdog_cdev_unregister(9)unregister watchdog character device✨
• watchdog_dev_exit(9)exit dev part of watchdog core✨
• watchdog_dev_init(9)init dev part of watchdog core✨
• watchdog_dev_register(9)register a watchdog device✨
• watchdog_dev_unregister(9)unregister a watchdog device✨
• watchdog_get_status(9)wrapper to get the watchdog status✨
• watchdog_get_timeleft(9)wrapper to get the time left before a reboot✨
• watchdog_hardlockup_disable(9)Disable the local event✨
• watchdog_hardlockup_enable(9)Enable the local event✨
• watchdog_hardlockup_probe(9)Probe whether NMI event is available at all✨
• watchdog_hardlockup_start(9)Start the watchdog after reconfiguration✨
• watchdog_hardlockup_stop(9)Stop the watchdog for reconfiguration✨
• watchdog_init_timeout(9)initialize the timeout field✨
• watchdog_ioctl(9)handle the different ioctl's for the watchdog device✨
• watchdog_ioctl_op(9)call the watchdog drivers ioctl op if defined✨
• watchdog_open(9)open the /dev/watchdog* devices✨
• watchdog_ping(9)ping the watchdog✨
• watchdog_register_device(9)register a watchdog device✨
• watchdog_release(9)release the watchdog device✨
• watchdog_set_last_hw_keepalive(9)set last HW keepalive time for watchdog✨
• watchdog_set_pretimeout(9)set the watchdog timer pretimeout✨
• watchdog_set_restart_priority(9)Change priority of restart handler✨
• watchdog_set_timeout(9)set the watchdog timer timeout✨
• watchdog_start(9)wrapper to start the watchdog✨
• watchdog_stop(9)wrapper to stop the watchdog✨
• watchdog_unregister_device(9)unregister a watchdog device✨
• watchdog_write(9)writes to the watchdog✨
• Watermark modifiers(9)✨
• wb_blkcg_offline(9)kill all wb's associated with a blkcg being offlined✨
• wb_domain_size_changed(9)memory available to a wb_domain has changed✨
• wb_dying(9)is a wb dying?✨
• wb_find_current(9)find wb for %current on a bdi✨
• wb_get(9)increment a wb's refcount✨
• wb_get_create(9)get wb for a given memcg, create if necessary✨
• wb_get_create_current(9)get or create wb for %current on a bdi✨
• wb_get_lookup(9)get wb for a given memcg✨
• wb_memcg_offline(9)kill all wb's associated with a memcg being offlined✨
• wb_over_bg_thresh(9)does @wb need to be written back?✨
• wb_put(9)decrement a wb's refcount✨
• wb_put_many(9)decrement a wb's refcount✨
• wb_split_bdi_pages(9)split nr_pages to write according to bandwidth✨
• wb_start_background_writeback(9)start background writeback✨
• wb_tryget(9)try to increment a wb's refcount✨
• wb_wait_for_completion(9)wait for completion of bdi_writeback_works✨
• wbc_account_cgroup_owner(9)account writeback to update inode cgroup ownership✨
• wbc_attach_and_unlock_inode(9)associate wbc with target inode and unlock it✨
• wbc_attach_fdatawrite_inode(9)associate wbc and inode for fdatawrite✨
• wbc_detach_inode(9)disassociate wbc from inode and perform foreign detection✨
• wbc_init_bio(9)writeback specific initialization of bio✨
• wbrf (int)(9)✨
• wbuf_has_ino(9)returns if the wbuf contains data from the inode.✨
• wbuf_timer_callback_nolock(9)write-buffer timer callback function.✨
• wcnss_ctrl_smd_callback(9)handler from SMD responses✨
• wcnss_download_nv(9)send nv binary to WCNSS✨
• wcnss_request_version(9)send a version request to WCNSS✨
• wdev_chandef(9)return chandef pointer from wireless_dev✨
• wdev_priv(9)return wiphy priv from wireless_dev✨
• wdev_to_ieee80211_vif(9)return a vif struct from a wdev✨
• wdrtas_close(9)close function of watchdog device✨
• wdrtas_exit(9)exit function of the watchdog driver✨
• wdrtas_get_boot_status(9)returns the reason for the last boot✨
• wdrtas_get_interval(9)returns the current watchdog interval✨
• wdrtas_get_status(9)returns the status of the watchdog✨
• wdrtas_get_temperature(9)returns current temperature✨
• wdrtas_get_tokens(9)reads in RTAS tokens✨
• wdrtas_init(9)init function of the watchdog driver✨