📦 linux-manual

N (continued)

• netdev_set_eeprom(9)write EEPROM data✨
• netdev_set_features(9)set receive checksum support✨
• netdev_set_gro_flush_timeout(9)set gro_flush_timeout of a netdev's NAPIs✨
• netdev_set_link_ksettings(9)set network device settings✨
• netdev_set_mac_address(9)Write the MAC address (from outside the driver)✨
• netdev_set_msglevel(9)set debug message level✨
• netdev_set_pauseparam(9)set flow control parameters✨
• netdev_set_rx_mode(9)✨
• netdev_set_wol(9)set Wake-on-LAN support✨
• netdev_sk_get_lowest_dev(9)Get the lowest device in chain given device and socket✨
• netdev_stat_queue_sum(9)add up queue stats from range of queues✨
• netdev_state_change(9)device changes state✨
• netdev_sw_irq_coalesce_default_on(9)enable SW IRQ coalescing by default✨
• netdev_tx(9)send out packet✨
• netdev_tx_completed_queue(9)report number of packets/bytes at TX completion.✨
• netdev_tx_reset_subqueue(9)reset the BQL stats and state of a netdev queue✨
• netdev_tx_sent_queue(9)report the number of bytes queued to a given tx queue✨
• netdev_tx_timeout(9)transmit timeout processing✨
• netdev_txq_bql_complete_prefetchw(9)prefetch bql data for write✨
• netdev_txq_bql_enqueue_prefetchw(9)prefetch bql data for write✨
• netdev_update_features(9)recalculate device features✨
• netdev_upper_dev_link(9)Add a link to the upper device✨
• netdev_upper_dev_unlink(9)Removes a link to upper device✨
• netdev_upper_get_next_dev_rcu(9)Get the next dev from upper list✨
• netdev_wait_allrefs_any(9)wait until all references are gone.✨
• netdev_work_cancel(9)cancel selected work for a netdev✨
• netfs_alloc_folioq_buffer(9)Allocate buffer space into a folio queue✨
• netfs_buffered_read_iter(9)Filesystem buffered I/O read routine✨
• netfs_buffered_write_iter_locked(9)write data to a file✨
• netfs_clear_inode_writeback(9)Clear writeback resources pinned by an inode✨
• netfs_clear_stale_isize(9)Clear stale pagecache in a to-be-created hole✨
• netfs_dirty_folio(9)Mark folio dirty and pin a cache object for writeback✨
• netfs_end_io_direct(9)declare that the direct i/o operation is done✨
• netfs_end_io_read(9)declare that the buffered read operation is done✨
• netfs_end_io_write(9)declare that the buffered write operation is done✨
• netfs_extract_user_iter(9)Extract the pages from a user iterator into a bvec✨
• netfs_file_read_iter(9)Generic filesystem read routine✨
• netfs_file_write_iter(9)write data to a file✨
• netfs_folioq_alloc(9)Allocate a folio_queue struct✨
• netfs_folioq_free(9)Free a folio_queue struct✨
• netfs_free_folioq_buffer(9)Free a folio queue.✨
• netfs_i_cookie(9)Get the cache cookie from the inode✨
• netfs_inode(9)Get the netfs inode context from the inode✨
• netfs_inode_init(9)Initialise a netfslib inode context✨
• netfs_invalidate_folio(9)Invalidate or partially invalidate a folio✨
• netfs_perform_write(9)Copy data into the pagecache.✨
• netfs_prepare_write_failed(9)Note write preparation failed✨
• netfs_read_folio(9)Helper to manage a read_folio request✨
• netfs_read_remote_i_size(9)Read remote_i_size safely✨
• netfs_read_single(9)Synchronously read a single blob of pages.✨
• netfs_read_sizes(9)Read remote_i_size and zero_point safely✨
• netfs_read_subreq_progress(9)Note progress of a read operation.✨
• netfs_read_subreq_terminated(9)Note the termination of an I/O operation.✨
• netfs_read_zero_point(9)Read zero_point safely✨
• netfs_readahead(9)Helper to manage a read request✨
• netfs_release_folio(9)Try to release a folio✨
• netfs_resize_file(9)Note that a file got resized✨
• netfs_single_mark_inode_dirty(9)Mark a single, monolithic object inode dirty✨
• netfs_start_io_direct(9)declare the file is being used for direct i/o✨
• netfs_start_io_read(9)declare the file is being used for buffered reads✨
• netfs_start_io_write(9)declare the file is being used for buffered writes✨
• netfs_unbuffered_read_iter(9)Perform an unbuffered or direct I/O read✨
• netfs_unbuffered_read_iter_locked(9)Perform an unbuffered or direct I/O read✨
• netfs_unbuffered_write_iter(9)Unbuffered write to a file✨
• netfs_unpin_writeback(9)Unpin writeback resources✨
• netfs_wait_for_outstanding_io(9)Wait for outstanding I/O to complete✨
• netfs_wb_begin(9)Begin writeback, waiting if need be✨
• netfs_write_begin(9)Helper to prepare for writing [DEPRECATED]✨
• netfs_write_subrequest_terminated(9)Note the termination of a write operation.✨
• netfs_writeback_single(9)Write back a monolithic payload✨
• netif_attr_test_mask(9)Test a CPU or Rx queue set in a mask✨
• netif_attr_test_online(9)Test for online CPU/Rx queue✨
• netif_attrmask_next(9)get the next CPU/Rx queue in a cpu/Rx queues mask✨
• netif_attrmask_next_and(9)get the next CPU/Rx queue in rc1p & rc2p✨
• netif_carrier_event(9)report carrier state event✨
• netif_carrier_off(9)clear carrier✨
• netif_carrier_ok(9)test if carrier present✨
• netif_carrier_on(9)set carrier✨
• netif_device_attach(9)mark device as attached✨
• netif_device_detach(9)mark device as removed✨
• netif_device_present(9)is device available or removed✨
• netif_dormant(9)test if device is dormant✨
• netif_dormant_off(9)set device as not dormant.✨
• netif_dormant_on(9)mark device as dormant.✨
• netif_get_flags(9)get flags reported to userspace✨
• netif_get_num_default_rss_queues(9)default number of RSS queues✨
• netif_get_port_parent_id(9)Get the device's port parent identifier✨
• netif_inherit_tso_max(9)copy all TSO limits from a lower device to an upper✨
• netif_is_multiqueue(9)test if device has multiple transmit queues✨
• netif_is_same_ice(9)determine if netdev is on the same ice NIC as local PF✨
• netif_napi_add(9)initialize a NAPI context✨
• netif_napi_add_config(9)initialize a NAPI context with persistent config✨
• netif_napi_add_tx(9)initialize a NAPI context to be used for Tx only✨
• netif_napi_del(9)remove a NAPI context✨
• netif_oper_up(9)test if device is operational✨
• netif_pre_changeaddr_notify(9)Call NETDEV_PRE_CHANGEADDR.✨
• netif_queue_set_napi(9)Associate queue with the napi✨
• netif_queue_stopped(9)test if transmit queue is flowblocked✨
• netif_receive_skb(9)process receive buffer from network✨
• netif_receive_skb_core(9)special purpose version of netif_receive_skb✨
• netif_receive_skb_list(9)process many receive buffers from network✨
• netif_running(9)test if up✨
• netif_rx(9)post buffer to the network code✨
• netif_rx_mode_sync(9)sync rx mode inline✨
• netif_set_mtu_ext(9)Change maximum transfer unit✨
• netif_set_real_num_queues(9)set actual number of RX and TX queues used✨
• netif_set_real_num_rx_queues(9)set actual number of RX queues used✨
• netif_set_tso_max_segs(9)set the max number of segs supported for TSO✨
• netif_set_tso_max_size(9)set the max size of TSO frames supported✨
• netif_setup_tc(9)Handle tc mappings on real_num_tx_queues change✨
• netif_stacked_transfer_operstate(9)transfer operstate✨
• netif_start_queue(9)allow transmit✨
• netif_start_subqueue(9)allow sending packets on subqueue✨
• netif_stop_queue(9)stop transmitted packets✨
• netif_stop_subqueue(9)stop sending packets on subqueue✨
• netif_subqueue_stopped(9)test status of subqueue✨
• netif_testing(9)test if device is under test✨
• netif_testing_off(9)set device as not under test.✨
• netif_testing_on(9)mark device as under test.✨
• netif_threaded_enable(9)enable threaded NAPIs✨
• netif_tx_lock(9)grab network device transmit lock✨
• netif_txq_maybe_stop(9)locklessly stop a Tx queue, if needed✨
• netif_uc_promisc_update(9)evaluate whether uc_promisc should be toggled.✨
• netif_wake_queue(9)restart transmit✨
• netif_wake_subqueue(9)allow sending packets on subqueue✨
• netlbl_af4list_add(9)Add a new IPv4 address entry to a list✨
• netlbl_af4list_audit_addr(9)Audit an IPv4 address✨
• netlbl_af4list_remove(9)Remove an IPv4 address entry✨
• netlbl_af4list_remove_entry(9)Remove an IPv4 address entry✨
• netlbl_af4list_search(9)Search for a matching IPv4 address entry✨
• netlbl_af4list_search_exact(9)Search for an exact IPv4 address entry✨
• netlbl_af6list_add(9)Add a new IPv6 address entry to a list✨
• netlbl_af6list_audit_addr(9)Audit an IPv6 address✨
• netlbl_af6list_remove(9)Remove an IPv6 address entry✨
• netlbl_af6list_remove_entry(9)Remove an IPv6 address entry✨
• netlbl_af6list_search(9)Search for a matching IPv6 address entry✨
• netlbl_af6list_search_exact(9)Search for an exact IPv6 address entry✨
• netlbl_audit_start(9)Start an audit message✨
• netlbl_audit_start_common(9)Start an audit message✨
• netlbl_bitmap_setbit(9)Sets a single bit in a bitmap✨
• netlbl_bitmap_walk(9)Walk a bitmap looking for a bit✨
• netlbl_cache_add(9)Add an entry to a NetLabel protocol cache✨
• netlbl_cache_invalidate(9)Invalidate all of the NetLabel protocol caches✨
• netlbl_calipso_add(9)Handle an ADD message✨
• netlbl_calipso_add_pass(9)Adds a CALIPSO pass DOI definition✨
• netlbl_calipso_genl_init(9)Register the CALIPSO NetLabel component✨
• netlbl_calipso_list(9)Handle a LIST message✨
• netlbl_calipso_listall(9)Handle a LISTALL message✨
• netlbl_calipso_listall_cb(9)calipso_doi_walk() callback for LISTALL✨
• netlbl_calipso_ops_register(9)Register the CALIPSO operations✨
• netlbl_calipso_remove(9)Handle a REMOVE message✨
• netlbl_calipso_remove_cb(9)netlbl_calipso_remove() callback for REMOVE✨
• netlbl_catmap_alloc(9)Allocate a LSM secattr catmap✨
• netlbl_catmap_free(9)Free a LSM secattr catmap✨
• netlbl_catmap_getlong(9)Export an unsigned long bitmap✨
• netlbl_catmap_setbit(9)Set a bit in a LSM secattr catmap✨
• netlbl_catmap_setlong(9)Import an unsigned long bitmap✨
• netlbl_catmap_setrng(9)Set a range of bits in a LSM secattr catmap✨
• netlbl_catmap_walk(9)Walk a LSM secattr catmap looking for a bit✨
• netlbl_catmap_walkrng(9)Find the end of a string of set bits✨
• netlbl_cfg_calipso_add(9)Add a new CALIPSO DOI definition✨
• netlbl_cfg_calipso_del(9)Remove an existing CALIPSO DOI definition✨
• netlbl_cfg_calipso_map_add(9)Add a new CALIPSO DOI mapping✨
• netlbl_cfg_cipsov4_add(9)Add a new CIPSOv4 DOI definition✨
• netlbl_cfg_cipsov4_del(9)Remove an existing CIPSOv4 DOI definition✨
• netlbl_cfg_cipsov4_map_add(9)Add a new CIPSOv4 DOI mapping✨
• netlbl_cfg_map_del(9)Remove a NetLabel/LSM domain mapping✨
• netlbl_cfg_unlbl_map_add(9)Add a new unlabeled mapping✨
• netlbl_cfg_unlbl_static_add(9)Adds a new static label✨
• netlbl_cfg_unlbl_static_del(9)Removes an existing static label✨
• netlbl_cipsov4_add(9)Handle an ADD message✨
• netlbl_cipsov4_add_common(9)Parse the common sections of a ADD message✨
• netlbl_cipsov4_add_local(9)Adds a CIPSO V4 DOI definition✨
• netlbl_cipsov4_add_pass(9)Adds a CIPSO V4 DOI definition✨
• netlbl_cipsov4_add_std(9)Adds a CIPSO V4 DOI definition✨
• netlbl_cipsov4_genl_init(9)Register the CIPSOv4 NetLabel component✨
• netlbl_cipsov4_list(9)Handle a LIST message✨
• netlbl_cipsov4_listall(9)Handle a LISTALL message✨
• netlbl_cipsov4_listall_cb(9)cipso_v4_doi_walk() callback for LISTALL✨
• netlbl_cipsov4_remove(9)Handle a REMOVE message✨
• netlbl_cipsov4_remove_cb(9)netlbl_cipsov4_remove() callback for REMOVE✨
• netlbl_conn_setattr(9)Label a connected socket using the correct protocol✨
• netlbl_domhsh_add(9)Adds a entry to the domain hash table✨
• netlbl_domhsh_add_default(9)Adds the default entry to the domain hash table✨
• netlbl_domhsh_audit_add(9)Generate an audit entry for an add event✨
• netlbl_domhsh_free_entry(9)Frees a domain hash table entry✨
• netlbl_domhsh_getentry(9)Get an entry from the domain hash table✨
• netlbl_domhsh_getentry_af4(9)Get an entry from the domain hash table✨
• netlbl_domhsh_getentry_af6(9)Get an entry from the domain hash table✨
• netlbl_domhsh_hash(9)Hashing function for the domain hash table✨
• netlbl_domhsh_init(9)Init for the domain hash✨
• netlbl_domhsh_remove(9)Removes an entry from the domain hash table✨
• netlbl_domhsh_remove_af4(9)Removes an address selector entry✨
• netlbl_domhsh_remove_af6(9)Removes an address selector entry✨
• netlbl_domhsh_remove_default(9)Removes the default entry from the table✨
• netlbl_domhsh_remove_entry(9)Removes a given entry from the domain table✨
• netlbl_domhsh_search(9)Search for a domain entry✨
• netlbl_domhsh_search_def(9)Search for a domain entry✨
• netlbl_domhsh_validate(9)Validate a new domain mapping entry✨
• netlbl_domhsh_walk(9)Iterate through the domain mapping hash table✨