📦 linux-manual

82568 pages · page 160 of 413

I (continued)

igb_alloc_q_vectors(9)Allocate memory for interrupt vectors✨
igb_alloc_rx_buffers(9)Replace used receive buffers✨
igb_blink_led(9)Blink LED✨
igb_cache_ring_register(9)Descriptor ring to register mapping✨
igb_change_mtu(9)Change the Maximum Transfer Unit✨
igb_check_alt_mac_addr(9)Check for alternate MAC addr✨
igb_check_downshift(9)Checks whether a downshift in speed occurred✨
igb_check_for_ack(9)checks to see if someone sent us ACK✨
igb_check_for_ack_pf(9)checks to see if the VF has ACKed✨
igb_check_for_copper_link(9)Check for link (Copper)✨
igb_check_for_link_82575(9)Check for link✨
igb_check_for_link_media_swap(9)Check which M88E1112 interface linked✨
igb_check_for_msg(9)checks to see if someone sent us mail✨
igb_check_for_msg_pf(9)checks to see if the VF has sent mail✨
igb_check_for_rst(9)checks to see if other side has reset✨
igb_check_for_rst_pf(9)checks to see if the VF has reset✨
igb_check_lvmmc(9)check for malformed packets received and indicated in LVMMC register✨
igb_check_polarity_82580(9)Checks the polarity.✨
igb_check_polarity_igp(9)Checks the polarity.✨
igb_check_polarity_m88(9)Checks the polarity.✨
igb_check_reset_block(9)Check if PHY reset is blocked✨
igb_check_swap_media(9)Detect and switch function for Media Auto Sense✨
igb_clean_all_rx_rings(9)Free Rx Buffers for all queues✨
igb_clean_all_tx_rings(9)Free Tx Buffers for all queues✨
igb_clean_rx_ring(9)Free Rx Buffers per Queue✨
igb_clean_tx_irq(9)Reclaim resources after transmit completes✨
igb_clean_tx_ring(9)Free Tx Buffers✨
igb_cleanup_headers(9)Correct corrupted or empty headers✨
igb_cleanup_led(9)Set LED config to default operation✨
igb_clear_hw_cntrs_82575(9)Clear device specific hardware counters✨
igb_clear_hw_cntrs_base(9)Clear base hardware counters✨
igb_clear_interrupt_scheme(9)reset the device to a state of no interrupts✨
igb_clear_vfta(9)Clear VLAN filter table✨
igb_config_collision_dist(9)Configure collision distance✨
igb_config_fc_after_link_up(9)Configures flow control after link✨
igb_config_tx_modes(9)Configure "Qav Tx mode" features on igb✨
igb_configure(9)configure the hardware for RX and TX✨
igb_configure_msix(9)Configure MSI-X hardware✨
igb_configure_rx(9)Configure receive Unit after Reset✨
igb_configure_rx_ring(9)Configure a receive ring after Reset✨
igb_configure_tx(9)Configure transmit Unit after Reset✨
igb_configure_tx_ring(9)Configure transmit ring after Reset✨
igb_copper_link_autoneg(9)Setup/Enable autoneg for copper link✨
igb_copper_link_setup_82580(9)Setup 82580 PHY for copper link✨
igb_copper_link_setup_igp(9)Setup igp PHY's for copper link✨
igb_copper_link_setup_m88(9)Setup m88 PHY's for copper link✨
igb_copper_link_setup_m88_gen2(9)Setup m88 PHY's for copper link✨
igb_disable_pcie_master(9)Disables PCI-express master access✨
igb_enable_mng_pass_thru(9)Enable processing of ARP's✨
igb_exit_module(9)Driver Exit Cleanup Routine✨
igb_find_vlvf_slot(9)find the VLAN id or the first empty slot✨
igb_force_mac_fc(9)Force the MAC's flow control settings✨
igb_free_all_rx_resources(9)Free Rx Resources for All Queues✨
igb_free_all_tx_resources(9)Free Tx Resources for All Queues✨
igb_free_q_vector(9)Free memory allocated for specific interrupt vector✨
igb_free_q_vectors(9)Free memory allocated for interrupt vectors✨
igb_free_rx_resources(9)Free Rx Resources✨
igb_free_tx_resources(9)Free Tx Resources per Queue✨
igb_get_auto_rd_done(9)Check for auto read completion✨
igb_get_bus_info_pcie(9)Get PCIe bus information✨
igb_get_cable_length_82580(9)Determine cable length for 82580 PHY✨
igb_get_cable_length_igp_2(9)Determine cable length for igp2 PHY✨
igb_get_cable_length_m88(9)Determine cable length for m88 PHY✨
igb_get_cfg_done_82575(9)Read config done bit✨
igb_get_cfg_done_i210(9)Read config done bit✨
igb_get_eee_status_i354(9)Get EEE status✨
igb_get_flash_presence_i210(9)Check if flash device is detected.✨
igb_get_fw_version(9)Get firmware version information✨
igb_get_hw_control(9)get control of the h/w from f/w✨
igb_get_hw_dev(9)return device✨
igb_get_hw_semaphore(9)Acquire hardware semaphore✨
igb_get_hw_semaphore_i210(9)Acquire hardware semaphore✨
igb_get_i2c_clk(9)Gets the I2C SCL clock state✨
igb_get_i2c_data(9)Reads the I2C SDA data bit✨
igb_get_link_up_info_82575(9)Get link speed/duplex info✨
igb_get_pcs_speed_and_duplex_82575(9)Retrieve current speed/duplex✨
igb_get_phy_id(9)Retrieve the PHY ID and revision✨
igb_get_phy_id_82575(9)Retrieve PHY addr and id✨
igb_get_phy_info_82580(9)Retrieve I82580 PHY information✨
igb_get_phy_info_igp(9)Retrieve igp PHY information✨
igb_get_phy_info_m88(9)Retrieve PHY information✨
igb_get_speed_and_duplex_copper(9)Retrieve current speed/duplex✨
igb_get_stats64(9)Get System Network Statistics✨
igb_get_thermal_sensor_data_generic(9)Gathers thermal sensor data✨
igb_has_link(9)check shared code for link and determine up/down✨
igb_hash_mc_addr(9)Generate a multicast hash value✨
igb_i21x_hw_doublecheck(9)double checks potential HW issue in i21X✨
igb_id_led_init(9)✨
igb_init_hw_82575(9)Initialize hardware✨
igb_init_i2c(9)Init I2C interface✨
igb_init_interrupt_scheme(9)initialize interrupts, allocate queues/vectors✨
igb_init_mac_params_82575(9)Init MAC func ptrs.✨
igb_init_mas(9)init Media Autosense feature if enabled in the NVM✨
igb_init_mbx_params_pf(9)set initial values for pf mailbox✨
igb_init_module(9)Driver Registration Routine✨
igb_init_nvm_params_82575(9)Init NVM func ptrs.✨
igb_init_nvm_params_i210(9)Init NVM func ptrs.✨
igb_init_phy_params_82575(9)Init PHY func ptrs.✨
igb_init_rx_addrs(9)Initialize receive address's✨
igb_init_thermal_sensor_thresh_generic(9)Sets thermal sensor thresholds✨
igb_initialize_M88E1512_phy(9)Initialize M88E1512 PHY✨
igb_initialize_M88E1543_phy(9)Initialize M88E1512 PHY✨
igb_intr(9)Legacy Interrupt Handler✨
igb_intr_msi(9)Interrupt Handler✨
igb_io_error_detected(9)called when PCI error is detected✨
igb_io_resume(9)called when traffic can start flowing again.✨
igb_io_slot_reset(9)called after the pci bus has been reset.✨
igb_ioctl(9)✨
igb_irq_disable(9)Mask off interrupt generation on the NIC✨
igb_irq_enable(9)Enable default interrupt generation settings✨
igb_is_non_eop(9)process handling of non-EOP buffers✨
igb_led_off(9)Turn LED off✨
igb_lower_eec_clk(9)Lower EEPROM clock✨
igb_mii_ioctl(9)✨
igb_mta_set(9)Set multicast filter table address✨
igb_obtain_mbx_lock_pf(9)obtain mailbox lock✨
igb_phy_force_speed_duplex_82580(9)Force speed/duplex for I82580 PHY✨
igb_phy_force_speed_duplex_igp(9)Force speed/duplex for igp PHY✨
igb_phy_force_speed_duplex_m88(9)Force speed/duplex for m88 PHY✨
igb_phy_force_speed_duplex_setup(9)Configure forced PHY speed/duplex✨
igb_phy_has_link(9)Polls PHY for link✨
igb_phy_hw_reset(9)PHY hardware reset✨
igb_phy_hw_reset_sgmii_82575(9)Performs a PHY reset✨
igb_phy_init_script_igp3(9)Inits the IGP3 PHY✨
igb_phy_reset_dsp(9)Reset PHY DSP✨
igb_phy_setup_autoneg(9)Configure PHY for auto-negotiation✨
igb_phy_sw_reset(9)PHY software reset✨
igb_pll_workaround_i210(9)✨
igb_poll(9)NAPI Rx polling callback✨
igb_poll_eerd_eewr_done(9)Poll for EEPROM read/write completion✨
igb_poll_for_ack(9)Wait for message acknowledgement✨
igb_poll_for_msg(9)Wait for message notification✨
igb_pool_flash_update_done_i210(9)Pool FLUDONE status.✨
igb_power_down_link(9)Power down the phy/serdes link✨
igb_power_down_phy_copper(9)Power down copper PHY✨
igb_power_down_phy_copper_82575(9)Remove link during PHY power down✨
igb_power_up_link(9)Power up the phy/serdes link✨
igb_power_up_phy_copper(9)Restore copper link in case of PHY power down✨
igb_power_up_serdes_link_82575(9)Power up the serdes link after shutdown✨
igb_probe(9)Device Initialization Routine✨
igb_probe_vfs(9)Initialize vf data storage and add VFs to pci config space✨
igb_process_skb_fields(9)Populate skb header fields from Rx descriptor✨
igb_ptp_hwtstamp_get(9)get hardware time stamping config✨
igb_ptp_hwtstamp_set(9)set hardware time stamping config✨
igb_ptp_init(9)Initialize PTP functionality✨
igb_ptp_reset(9)Re-enable the adapter for PTP following a reset.✨
igb_ptp_rx_hang(9)detect error case when Rx timestamp registers latched✨
igb_ptp_rx_pktstamp(9)retrieve Rx per packet timestamp✨
igb_ptp_rx_rgtstamp(9)retrieve Rx timestamp stored in register✨
igb_ptp_sdp_init(9)utility function which inits the SDP config structs✨
igb_ptp_set_timestamp_mode(9)setup hardware for timestamping✨
igb_ptp_stop(9)Disable PTP device and stop the overflow check.✨
igb_ptp_suspend(9)Disable PTP work items and prepare for suspend✨
igb_ptp_systim_to_hwtstamp(9)convert system time value to hw timestamp✨
igb_ptp_tx_hang(9)detect error case where Tx timestamp never finishes✨
igb_ptp_tx_hwtstamp(9)utility function which checks for TX time stamp✨
igb_ptp_tx_work(9)✨
igb_put_hw_semaphore(9)Release hardware semaphore✨
igb_raise_eec_clk(9)Raise EEPROM clock✨
igb_rar_set(9)Set receive address register✨
igb_rar_set_index(9)Sync RAL[index] and RAH[index] registers with MAC table✨
igb_read_emi_reg(9)Read Extended Management Interface register✨
igb_read_i2c_byte(9)Reads 8 bit word over I2C✨
igb_read_invm_i210(9)Read invm wrapper function for I210/I211✨
igb_read_invm_version(9)Reads iNVM version and image type✨
igb_read_invm_word_i210(9)Reads OTP✨
igb_read_mac_addr(9)Read device MAC address✨
igb_read_mac_addr_82575(9)Read device MAC address✨
igb_read_mbx(9)Reads a message from the mailbox✨
igb_read_mbx_pf(9)Read a message from the mailbox✨
igb_read_nvm_eerd(9)Reads EEPROM using EERD register✨
igb_read_nvm_spi(9)Read EEPROM's using SPI✨
igb_read_nvm_srrd_i210(9)Reads Shadow Ram using EERD register✨
igb_read_part_string(9)Read device part number✨
igb_read_phy_reg_82580(9)Read 82580 MDI control register✨
igb_read_phy_reg_i2c(9)Read PHY register using i2c✨
igb_read_phy_reg_igp(9)Read igp PHY register✨
igb_read_phy_reg_mdic(9)Read MDI control register✨
igb_read_phy_reg_sgmii_82575(9)Read PHY register using sgmii✨
igb_read_posted_mbx(9)Wait for message notification and receive message✨
igb_read_sfp_data_byte(9)Reads SFP module data.✨
igb_read_xmdio_reg(9)Read XMDIO register✨
igb_ready_nvm_eeprom(9)Prepares EEPROM for read/write✨
igb_release_hw_control(9)release control of the h/w to f/w✨
igb_release_mbx_lock_pf(9)release mailbox lock✨
igb_release_nvm(9)Release exclusive access to EEPROM✨
igb_release_nvm_82575(9)Release exclusive access to EEPROM✨
igb_release_nvm_i210(9)Release exclusive access to EEPROM✨
igb_release_phy_82575(9)Release rights to access PHY✨
igb_release_swfw_sync_82575(9)Release SW/FW semaphore✨
igb_release_swfw_sync_i210(9)Release SW/FW semaphore✨
igb_remove(9)Device Removal Routine✨
igb_remove_i2c(9)Cleanup I2C interface✨
igb_request_irq(9)initialize interrupts✨
igb_request_msix(9)Initialize MSI-X interrupts✨
igb_reset_hw_82575(9)Reset hardware✨
igb_reset_hw_82580(9)Reset hardware✨
igb_reset_init_script_82575(9)Inits HW defaults after reset✨
igb_reset_mdicnfg_82580(9)Reset MDICNFG destination and com_mdio bits✨
igb_reset_q_vector(9)Reset config for interrupt vector✨