atapi_cmd_type(9)

💅 NAME 💅

atapi_cmd_type — Determine ATAPI command type from SCSI opcode.

okay so bestie, this is atapi_cmd_type(9) from the Kernel API Manual, and it is literally the vibe-checker for ATAPI command types. ✨

---

🎀 SYNOPSIS 🎀

int atapi_cmd_type (u8 opcode );

That is the exact signature, no cap. 💖

---

🦋 ARGUMENTS 🦋

• opcode — SCSI opcode. That is the one and only argument, bestie. 🫶

---

🌸 DESCRIPTION 🌸

Determine ATAPI command type from opcode. It is giving “look at the opcode and tell me which ATAPI command type this is.” 🔥

LOCKING: None. Zero locking drama here. 💅

---

👑 RETURN 👑

The return value is one of these, literally:

ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}

---

🌈 SEE ALSO 🌈

Kernel file: ./drivers/ata/libata-core.c

Here is the whole reference posse, every single one:

• ata_link_next(9), ata_dev_next(9), ata_dev_phys_link(9), ata_force_cbl(9), ata_force_pflags(9), ata_force_link_limits(9), ata_force_xfermask(9), ata_force_quirks(9), ata_set_rwcmd_protocol(9), ata_tf_read_block(9), ata_build_rw_tf(9), ata_pack_xfermask(9), ata_unpack_xfermask(9)
• ata_xfer_mask2mode(9), ata_xfer_mode2mask(9), ata_xfer_mode2shift(9), ata_mode_string(9), ata_dev_classify(9), ata_id_string(9), ata_id_c_string(9), ata_read_native_max_address(9), ata_set_max_sectors(9), ata_hpa_resize(9), ata_dump_id(9), ata_id_xfermask(9), ata_exec_internal(9)
• ata_pio_need_iordy(9), ata_pio_mask_no_iordy(9), ata_do_dev_read_id(9), ata_dev_read_id(9), ata_dev_power_set_standby(9), ata_dev_power_set_active(9), ata_read_log_page(9), ata_dev_configure(9), ata_cable_40wire(9), ata_cable_80wire(9), ata_cable_unknown(9), ata_cable_ignore(9), ata_cable_sata(9)
• sata_print_link_status(9), ata_dev_pair(9), ata_timing_cycle2mode(9), ata_down_xfermask_limit(9), ata_set_mode(9), ata_wait_ready(9), ata_wait_after_reset(9), ata_std_prereset(9), ata_std_postreset(9), ata_dev_same_device(9), ata_dev_reread_id(9), ata_dev_revalidate(9), ata_is_40wire(9)
• cable_is_40wire(9), ata_dev_xfermask(9), ata_dev_set_xfermode(9), ata_dev_set_feature(9), ata_dev_init_params(9), atapi_check_dma(9), ata_std_qc_defer(9), ata_sg_init(9), ata_sg_clean(9), ata_sg_setup(9), swap_buf_le16(9), ata_qc_free(9), ata_qc_complete(9)
• ata_qc_get_active(9), ata_qc_issue(9), ata_phys_link_online(9), ata_phys_link_offline(9), ata_link_online(9), ata_link_offline(9), ata_host_suspend(9), ata_host_resume(9), ata_dev_init(9), ata_link_init(9), sata_link_init_spd(9), ata_port_alloc(9), ata_host_alloc(9)
• ata_host_alloc_pinfo(9), ata_finalize_port_ops(9), ata_host_start(9), ata_host_init(9), ata_host_register(9), ata_host_activate(9), ata_dev_free_resources(9), ata_port_detach(9), ata_host_detach(9), ata_pci_remove_one(9), ata_platform_remove_one(9), ata_msleep(9), ata_wait_register(9)

---

mwah 💖 that is the whole page, bestie. Source/version: ./drivers/ata. Date: October 2026. Page: atapi_cmd_type(9). Slay and goodbye. 🎀✨