atapi_check_dma(9)

🎀 NAME 🎀

Ok bestie, this is the Kernel API Manual page for atapi_check_dma — manual name folded right in at the top so you’re not lost. Its whole job? Check whether ATAPI DMA can be supported. That’s it. A tiny little gatekeeper moment, and honestly? Iconic. 💅

✨ SYNOPSIS ✨

int atapi_check_dma (struct ata_queued_cmd *qc );

🌸 ARGUMENTS 🌸

• qc — metadata associated with the taskfile to check. It’s the context pack for the command you’re vibe-checking. 🫶

🦋 DESCRIPTION 🦋

This lets the low-level driver filter ATA PACKET commands and hand back a status saying whether or not it’s OK to use DMA for the supplied PACKET command. No cap, it’s giving “driver gets a say in whether DMA is invited to the party.” ✨

LOCKING: spin_lock_irqsave(host lock)

🔥 RETURN 🔥

• 0 when ATAPI DMA can be used
• nonzero otherwise

So zero is the slay case, and nonzero is the nope case. 💀

💖 SEE ALSO 💖

Kernel file: ./drivers/ata/libata-core.c — that’s the spot. And here’s the whole friend group, in order:

• ata_link_next(9)
• ata_dev_next(9)
• ata_dev_phys_link(9)
• ata_force_cbl(9)
• ata_force_pflags(9)
• ata_force_link_limits(9)
• ata_force_xfermask(9)
• ata_force_quirks(9)
• atapi_cmd_type(9)
• ata_set_rwcmd_protocol(9)
• ata_tf_read_block(9)
• ata_build_rw_tf(9)
• ata_pack_xfermask(9)
• ata_unpack_xfermask(9)
• ata_xfer_mask2mode(9)
• ata_xfer_mode2mask(9)
• ata_xfer_mode2shift(9)
• ata_mode_string(9)
• ata_dev_classify(9)
• ata_id_string(9)
• ata_id_c_string(9)
• ata_read_native_max_address(9)
• ata_set_max_sectors(9)
• ata_hpa_resize(9)
• ata_dump_id(9)
• ata_id_xfermask(9)
• ata_exec_internal(9)
• ata_pio_need_iordy(9)
• ata_pio_mask_no_iordy(9)
• ata_do_dev_read_id(9)
• ata_dev_read_id(9)
• ata_dev_power_set_standby(9)
• ata_dev_power_set_active(9)
• ata_read_log_page(9)
• ata_dev_configure(9)
• ata_cable_40wire(9)
• ata_cable_80wire(9)
• ata_cable_unknown(9)
• ata_cable_ignore(9)
• ata_cable_sata(9)
• sata_print_link_status(9)
• ata_dev_pair(9)
• ata_timing_cycle2mode(9)
• ata_down_xfermask_limit(9)
• ata_set_mode(9)
• ata_wait_ready(9)
• ata_wait_after_reset(9)
• ata_std_prereset(9)
• ata_std_postreset(9)
• ata_dev_same_device(9)
• ata_dev_reread_id(9)
• ata_dev_revalidate(9)
• ata_is_40wire(9)
• cable_is_40wire(9)
• ata_dev_xfermask(9)
• ata_dev_set_xfermode(9)
• ata_dev_set_feature(9)
• ata_dev_init_params(9)
• ata_std_qc_defer(9)
• ata_sg_init(9)
• ata_sg_clean(9)
• ata_sg_setup(9)
• swap_buf_le16(9)
• ata_qc_free(9)
• ata_qc_complete(9)
• ata_qc_get_active(9)
• ata_qc_issue(9)
• ata_phys_link_online(9)
• ata_phys_link_offline(9)
• ata_link_online(9)
• ata_link_offline(9)
• ata_host_suspend(9)
• ata_host_resume(9)
• ata_dev_init(9)
• ata_link_init(9)
• sata_link_init_spd(9)
• ata_port_alloc(9)
• ata_host_alloc(9)
• ata_host_alloc_pinfo(9)
• ata_finalize_port_ops(9)
• ata_host_start(9)
• ata_host_init(9)
• ata_host_register(9)
• ata_host_activate(9)
• ata_dev_free_resources(9)
• ata_port_detach(9)
• ata_host_detach(9)
• ata_pci_remove_one(9)
• ata_platform_remove_one(9)
• ata_msleep(9)
• ata_wait_register(9)

Bye bestie 💖 this one lives under ./drivers/ata, dated October 2026, and it’s the atapi_check_dma(9) entry. Now go forth and check that DMA. 🌈👑