transmit_cleanup(9)

✨ NAME ✨

transmit_cleanup(9) — from the Kernel API Manual, bestie — is here to clean up transmit descriptors. That’s the whole main-character arc, and it ate. 💅

🦋 SYNOPSIS 🦋

void transmit_cleanup (struct dev_info *hw_priv , int normal );

🎀 ARGUMENTS 🎀

• hw_priv — the network device. That’s the vibe.
• normal — break if owned. That’s literally the note, no extra lore, no cap.

🌸 DESCRIPTION 🌸

Okay so this routine is called to clean up the transmitted buffers. That’s it. That’s the job. It’s giving cleanup era, and it’s doing exactly what it says on the tin. ✨

🔗 SEE ALSO 🔗

Kernel file ./drivers/net/ethernet/micrel/ksz884x.c is the main-character file, and here’s the whole SEE ALSO roll call, no skipping, no missing besties:

struct ksz_hw_desc(9),
struct ksz_sw_desc(9),
struct ksz_dma_buf(9),
struct ksz_desc(9),
struct ksz_desc_info(9),
struct ksz_mac_table(9),
struct ksz_vlan_table(9),
struct ksz_port_mib(9),
struct ksz_port_cfg(9),
struct ksz_switch(9),
struct ksz_port_info(9),
struct ksz_hw(9),
struct ksz_port(9),
struct ksz_timer_info(9),
struct ksz_shared_mem(9),
struct ksz_counter_info(9),
struct dev_info(9),
struct dev_priv(9),
hw_turn_on_intr(9),
hw_block_intr(9),
sw_r_table(9),
sw_w_table_64(9),
sw_w_sta_mac_table(9),
sw_r_vlan_table(9),
port_r_mib_cnt(9),
port_r_mib_pkt(9),
port_r_cnt(9),
port_init_cnt(9),
port_cfg(9),
port_r8(9),
port_r16(9),
port_w16(9),
sw_chk(9),
sw_cfg(9),
sw_cfg_broad_storm(9),
sw_get_broad_storm(9),
sw_dis_broad_storm(9),
sw_ena_broad_storm(9),
sw_init_broad_storm(9),
hw_cfg_broad_storm(9),
sw_dis_prio_rate(9),
sw_init_prio_rate(9),
sw_dis_diffserv(9),
sw_dis_802_1p(9),
sw_cfg_replace_null_vid(9),
sw_cfg_replace_vid(9),
sw_cfg_port_based(9),
sw_dis_multi_queue(9),
sw_init_prio(9),
port_get_def_vid(9),
sw_init_vlan(9),
sw_cfg_port_base_vlan(9),
sw_set_addr(9),
sw_set_global_ctrl(9),
port_set_stp_state(9),
sw_clr_sta_mac_table(9),
sw_init_stp(9),
sw_block_addr(9),
hw_r_phy(9),
hw_w_phy(9),
eeprom_read(9),
eeprom_write(9),
port_get_link_speed(9),
port_set_link_speed(9),
port_force_link_speed(9),
hw_chk_wol_pme_status(9),
hw_clr_wol_pme_status(9),
hw_cfg_wol_pme(9),
hw_cfg_wol(9),
hw_set_wol_frame(9),
hw_add_wol_arp(9),
hw_add_wol_bcast(9),
hw_add_wol_mcast(9),
hw_add_wol_ucast(9),
hw_enable_wol(9),
hw_init(9),
hw_reset(9),
hw_setup(9),
hw_setup_intr(9),
hw_set_desc_base(9),
hw_start_rx(9),
hw_stop_rx(9),
hw_start_tx(9),
hw_stop_tx(9),
hw_disable(9),
hw_enable(9),
hw_alloc_pkt(9),
hw_send_pkt(9),
hw_set_addr(9),
hw_read_addr(9),
hw_clr_multicast(9),
hw_set_grp_addr(9),
hw_set_multicast(9),
hw_set_promiscuous(9),
sw_enable(9),
sw_setup(9),
ksz_start_timer(9),
ksz_stop_timer(9),
ksz_alloc_soft_desc(9),
ksz_alloc_desc(9),
free_dma_buf(9),
ksz_init_rx_buffers(9),
ksz_alloc_mem(9),
ksz_free_desc(9),
ksz_free_buffers(9),
ksz_free_mem(9),
send_packet(9),
tx_done(9),
netdev_tx(9),
netdev_tx_timeout(9),
netdev_intr(9),
netdev_close(9),
netdev_open(9),
netdev_query_statistics(9),
netdev_set_mac_address(9),
netdev_set_rx_mode(9),
netdev_ioctl(9),
mdio_read(9),
mdio_write(9),
netdev_get_link_ksettings(9),
netdev_set_link_ksettings(9),
netdev_nway_reset(9),
netdev_get_link(9),
netdev_get_drvinfo(9),
netdev_get_regs_len(9),
netdev_get_regs(9),
netdev_get_wol(9),
netdev_set_wol(9),
netdev_get_msglevel(9),
netdev_set_msglevel(9),
netdev_get_eeprom_len(9),
netdev_get_eeprom(9),
netdev_set_eeprom(9),
netdev_get_pauseparam(9),
netdev_set_pauseparam(9),
netdev_get_ringparam(9),
netdev_get_strings(9),
netdev_get_sset_count(9),
netdev_get_ethtool_stats(9),
netdev_set_features(9),
dev_monitor(9),
netdev_init(9)

xoxo, source/version ./drivers/net/ethernet/micrel, date October 2026 💖🧚