hw_add_wol_mcast(9)

✨ NAME ✨

okay bestie, this is hw_add_wol_mcast from the Kernel API Manual, section 9 — and she is here to add multicast pattern. 💖 No cap, that's the whole name vibe: hw_add_wol_mcast — add multicast pattern.

🦋 SYNOPSIS 🦋

the signature is literally:

void hw_add_wol_mcast (struct ksz_hw *hw );

💅 ARGUMENTS 💅

• hw — The hardware instance. 🖥️✨

🎀 DESCRIPTION 🎀

okay so this routine is used to add multicast pattern for waking up the host. 🫶

It is assumed the multicast packet is the ICMPv6 neighbor solicitation used by IPv6 ping command. Important vibe check: multicast packets are filtered through the multicast hash table (the page says "filtred" and honestly iconic), so not all multicast packets can wake up the host. 😭💀

🔥 SEE ALSO 🔥

the kernel file is ./drivers/net/ethernet/micrel/ksz884x.c, and here's the whole cast tagged in — every single one, no skips:

• struct ksz_hw_desc(9), struct ksz_sw_desc(9), struct ksz_dma_buf(9), struct ksz_desc(9), struct ksz_desc_info(9), struct ksz_mac_table(9), struct ksz_vlan_table(9), struct ksz_port_mib(9), struct ksz_port_cfg(9), struct ksz_switch(9), struct ksz_port_info(9), struct ksz_hw(9), struct ksz_port(9), struct ksz_timer_info(9), struct ksz_shared_mem(9), struct ksz_counter_info(9), struct dev_info(9), struct dev_priv(9)
• hw_turn_on_intr(9), hw_block_intr(9), sw_r_table(9), sw_w_table_64(9), sw_w_sta_mac_table(9), sw_r_vlan_table(9), port_r_mib_cnt(9), port_r_mib_pkt(9), port_r_cnt(9), port_init_cnt(9), port_cfg(9), port_r8(9), port_r16(9), port_w16(9), sw_chk(9), sw_cfg(9)
• sw_cfg_broad_storm(9), sw_get_broad_storm(9), sw_dis_broad_storm(9), sw_ena_broad_storm(9), sw_init_broad_storm(9), hw_cfg_broad_storm(9), sw_dis_prio_rate(9), sw_init_prio_rate(9), sw_dis_diffserv(9), sw_dis_802_1p(9), sw_cfg_replace_null_vid(9), sw_cfg_replace_vid(9), sw_cfg_port_based(9), sw_dis_multi_queue(9), sw_init_prio(9)
• port_get_def_vid(9), sw_init_vlan(9), sw_cfg_port_base_vlan(9), sw_set_addr(9), sw_set_global_ctrl(9), port_set_stp_state(9), sw_clr_sta_mac_table(9), sw_init_stp(9), sw_block_addr(9), hw_r_phy(9), hw_w_phy(9), eeprom_read(9), eeprom_write(9), port_get_link_speed(9), port_set_link_speed(9), port_force_link_speed(9)
• hw_chk_wol_pme_status(9), hw_clr_wol_pme_status(9), hw_cfg_wol_pme(9), hw_cfg_wol(9), hw_set_wol_frame(9), hw_add_wol_arp(9), hw_add_wol_bcast(9), hw_add_wol_ucast(9), hw_enable_wol(9), hw_init(9), hw_reset(9), hw_setup(9), hw_setup_intr(9), hw_set_desc_base(9)
• hw_start_rx(9), hw_stop_rx(9), hw_start_tx(9), hw_stop_tx(9), hw_disable(9), hw_enable(9), hw_alloc_pkt(9), hw_send_pkt(9), hw_set_addr(9), hw_read_addr(9), hw_clr_multicast(9), hw_set_grp_addr(9), hw_set_multicast(9), hw_set_promiscuous(9)
• sw_enable(9), sw_setup(9), ksz_start_timer(9), ksz_stop_timer(9), ksz_alloc_soft_desc(9), ksz_alloc_desc(9), free_dma_buf(9), ksz_init_rx_buffers(9), ksz_alloc_mem(9), ksz_free_desc(9), ksz_free_buffers(9), ksz_free_mem(9), send_packet(9), transmit_cleanup(9), tx_done(9)
• netdev_tx(9), netdev_tx_timeout(9), netdev_intr(9), netdev_close(9), netdev_open(9), netdev_query_statistics(9), netdev_set_mac_address(9), netdev_set_rx_mode(9), netdev_ioctl(9), mdio_read(9), mdio_write(9), netdev_get_link_ksettings(9), netdev_set_link_ksettings(9), netdev_nway_reset(9), netdev_get_link(9)
• netdev_get_drvinfo(9), netdev_get_regs_len(9), netdev_get_regs(9), netdev_get_wol(9), netdev_set_wol(9), netdev_get_msglevel(9), netdev_set_msglevel(9), netdev_get_eeprom_len(9), netdev_get_eeprom(9), netdev_set_eeprom(9), netdev_get_pauseparam(9), netdev_set_pauseparam(9), netdev_get_ringparam(9), netdev_get_strings(9)
• netdev_get_sset_count(9), netdev_get_ethtool_stats(9), netdev_set_features(9), dev_monitor(9), netdev_init(9)

this page is from ./drivers/net/ethernet/micrel, dated October 2026, and it's hw_add_wol_mcast(9) — slay 💅✨