netdev_get_regs_len(9)

💅 netdev_get_regs_len(9) — Kernel API Manual 💅

Okay bestie, welcome to the manual page for netdev_get_regs_len(9) from the Kernel API Manual. It's a tiny little function with one very specific job, and honestly? It ate. 💖

✨ NAME ✨

netdev_get_regs_len — get length of register dump.

🌸 SYNOPSIS 🌸

int netdev_get_regs_len (struct net_device *dev );

🎀 ARGUMENTS 🎀

• dev — Network device. That's the whole argument, bestie. One network device, no extra drama. 💅

🦋 DESCRIPTION 🦋

This function returns the length of the register dump.

That's it. That's the vibe. It literally returns the length of the register dump. Return length of the register dump. No cap. ✨

🔥 SEE ALSO 🔥

Kernel file ./drivers/net/ethernet/micrel/ksz884x.c and the whole iconic cross-reference friend group: struct ksz_hw_desc(9), struct ksz_sw_desc(9), struct ksz_dma_buf(9), struct ksz_desc(9), struct ksz_desc_info(9), struct ksz_mac_table(9), struct ksz_vlan_table(9), struct ksz_port_mib(9), struct ksz_port_cfg(9), struct ksz_switch(9), struct ksz_port_info(9), struct ksz_hw(9), struct ksz_port(9), struct ksz_timer_info(9), struct ksz_shared_mem(9), struct ksz_counter_info(9), struct dev_info(9), struct dev_priv(9), hw_turn_on_intr(9), hw_block_intr(9), sw_r_table(9), sw_w_table_64(9), sw_w_sta_mac_table(9), sw_r_vlan_table(9), port_r_mib_cnt(9), port_r_mib_pkt(9), port_r_cnt(9), port_init_cnt(9), port_cfg(9), port_r8(9), port_r16(9), port_w16(9), sw_chk(9), sw_cfg(9), sw_cfg_broad_storm(9), sw_get_broad_storm(9), sw_dis_broad_storm(9), sw_ena_broad_storm(9), sw_init_broad_storm(9), hw_cfg_broad_storm(9), sw_dis_prio_rate(9), sw_init_prio_rate(9), sw_dis_diffserv(9), sw_dis_802_1p(9), sw_cfg_replace_null_vid(9), sw_cfg_replace_vid(9), sw_cfg_port_based(9), sw_dis_multi_queue(9), sw_init_prio(9), port_get_def_vid(9), sw_init_vlan(9), sw_cfg_port_base_vlan(9), sw_set_addr(9), sw_set_global_ctrl(9), port_set_stp_state(9), sw_clr_sta_mac_table(9), sw_init_stp(9), sw_block_addr(9), hw_r_phy(9), hw_w_phy(9), eeprom_read(9), eeprom_write(9), port_get_link_speed(9), port_set_link_speed(9), port_force_link_speed(9), hw_chk_wol_pme_status(9), hw_clr_wol_pme_status(9), hw_cfg_wol_pme(9), hw_cfg_wol(9), hw_set_wol_frame(9), hw_add_wol_arp(9), hw_add_wol_bcast(9), hw_add_wol_mcast(9), hw_add_wol_ucast(9), hw_enable_wol(9), hw_init(9), hw_reset(9), hw_setup(9), hw_setup_intr(9), hw_set_desc_base(9), hw_start_rx(9), hw_stop_rx(9), hw_start_tx(9), hw_stop_tx(9), hw_disable(9), hw_enable(9), hw_alloc_pkt(9), hw_send_pkt(9), hw_set_addr(9), hw_read_addr(9), hw_clr_multicast(9), hw_set_grp_addr(9), hw_set_multicast(9), hw_set_promiscuous(9), sw_enable(9), sw_setup(9), ksz_start_timer(9), ksz_stop_timer(9), ksz_alloc_soft_desc(9), ksz_alloc_desc(9), free_dma_buf(9), ksz_init_rx_buffers(9), ksz_alloc_mem(9), ksz_free_desc(9), ksz_free_buffers(9), ksz_free_mem(9), send_packet(9), transmit_cleanup(9), tx_done(9), netdev_tx(9), netdev_tx_timeout(9), netdev_intr(9), netdev_close(9), netdev_open(9), netdev_query_statistics(9), netdev_set_mac_address(9), netdev_set_rx_mode(9), netdev_ioctl(9), mdio_read(9), mdio_write(9), netdev_get_link_ksettings(9), netdev_set_link_ksettings(9), netdev_nway_reset(9), netdev_get_link(9), netdev_get_drvinfo(9), netdev_get_regs(9), netdev_get_wol(9), netdev_set_wol(9), netdev_get_msglevel(9), netdev_set_msglevel(9), netdev_get_eeprom_len(9), netdev_get_eeprom(9), netdev_set_eeprom(9), netdev_get_pauseparam(9), netdev_set_pauseparam(9), netdev_get_ringparam(9), netdev_get_strings(9), netdev_get_sset_count(9), netdev_get_ethtool_stats(9), netdev_set_features(9), dev_monitor(9), netdev_init(9).

That's the whole page, bestie 💖. Footer tea for the very end: source/version is ./drivers/net/ethernet/micrel, the date is October 2026, and the page title is netdev_get_regs_len(9). Go get that register dump length, queen 🫶✨.