port_set_stp_state(9)

💅 port_set_stp_state(9) — like, the kernel API manual, bestie ✨

okay so welcome to the Kernel API Manual entry for port_set_stp_state, bestie 🫶 this is a tiny little function but it's important, so grab your iced coffee and let's go 🍓

---

🌸 NAME 🌸

port_set_stp_state — configure port spanning tree state 💫

like, literally, that's the whole vibe: you're setting the spanning tree state of a port. iconic.

---

✨ SYNOPSIS ✨

void port_set_stp_state (struct ksz_hw *hw , int port , int state );

no cap, three arguments, returns void (so it gives you nothing back — it just does the thing). main character energy honestly 👑

---

🎀 ARGUMENTS 🎀

• hw — The hardware instance. 💖 like, the actual chip you're talking to.
• port — The port index. 🦋 which port we're doing the thing to.
• state — The spanning tree state. 🌈 what state we're putting it in.

---

💅 DESCRIPTION 💅

This routine configures the spanning tree state of the port. that's it. that's the whole function. it takes hw, port, and state and it goes and sets the spanning tree state of that port. slay 💅✨

lowkey the most straightforward function in this whole driver, ngl.

---

🔥 SEE ALSO 🔥

okay so this next part is a lot but we don't skip, periodt. here's the full crew — Kernel file ./drivers/net/ethernet/micrel/ksz884x.c plus every single reference, no cap 😭

• ./drivers/net/ethernet/micrel/ksz884x.c — Kernel file 💖
• struct ksz_hw_desc(9)
• struct ksz_sw_desc(9)
• struct ksz_dma_buf(9)
• struct ksz_desc(9)
• struct ksz_desc_info(9)
• struct ksz_mac_table(9)
• struct ksz_vlan_table(9)
• struct ksz_port_mib(9)
• struct ksz_port_cfg(9)
• struct ksz_switch(9)
• struct ksz_port_info(9)
• struct ksz_hw(9)
• struct ksz_port(9)
• struct ksz_timer_info(9)
• struct ksz_shared_mem(9)
• struct ksz_counter_info(9)
• struct dev_info(9)
• struct dev_priv(9)
• hw_turn_on_intr(9)
• hw_block_intr(9)
• sw_r_table(9)
• sw_w_table_64(9)
• sw_w_sta_mac_table(9)
• sw_r_vlan_table(9)
• port_r_mib_cnt(9)
• port_r_mib_pkt(9)
• port_r_cnt(9)
• port_init_cnt(9)
• port_cfg(9)
• port_r8(9)
• port_r16(9)
• port_w16(9)
• sw_chk(9)
• sw_cfg(9)
• sw_cfg_broad_storm(9)
• sw_get_broad_storm(9)
• sw_dis_broad_storm(9)
• sw_ena_broad_storm(9)
• sw_init_broad_storm(9)
• hw_cfg_broad_storm(9)
• sw_dis_prio_rate(9)
• sw_init_prio_rate(9)
• sw_dis_diffserv(9)
• sw_dis_802_1p(9)
• sw_cfg_replace_null_vid(9)
• sw_cfg_replace_vid(9)
• sw_cfg_port_based(9)
• sw_dis_multi_queue(9)
• sw_init_prio(9)
• port_get_def_vid(9)
• sw_init_vlan(9)
• sw_cfg_port_base_vlan(9)
• sw_set_addr(9)
• sw_set_global_ctrl(9)
• sw_clr_sta_mac_table(9)
• sw_init_stp(9)
• sw_block_addr(9)
• hw_r_phy(9)
• hw_w_phy(9)
• eeprom_read(9)
• eeprom_write(9)
• port_get_link_speed(9)
• port_set_link_speed(9)
• port_force_link_speed(9)
• hw_chk_wol_pme_status(9)
• hw_clr_wol_pme_status(9)
• hw_cfg_wol_pme(9)
• hw_cfg_wol(9)
• hw_set_wol_frame(9)
• hw_add_wol_arp(9)
• hw_add_wol_bcast(9)
• hw_add_wol_mcast(9)
• hw_add_wol_ucast(9)
• hw_enable_wol(9)
• hw_init(9)
• hw_reset(9)
• hw_setup(9)
• hw_setup_intr(9)
• hw_set_desc_base(9)
• hw_start_rx(9)
• hw_stop_rx(9)
• hw_start_tx(9)
• hw_stop_tx(9)
• hw_disable(9)
• hw_enable(9)
• hw_alloc_pkt(9)
• hw_send_pkt(9)
• hw_set_addr(9)
• hw_read_addr(9)
• hw_clr_multicast(9)
• hw_set_grp_addr(9)
• hw_set_multicast(9)
• hw_set_promiscuous(9)
• sw_enable(9)
• sw_setup(9)
• ksz_start_timer(9)
• ksz_stop_timer(9)
• ksz_alloc_soft_desc(9)
• ksz_alloc_desc(9)
• free_dma_buf(9)
• ksz_init_rx_buffers(9)
• ksz_alloc_mem(9)
• ksz_free_desc(9)
• ksz_free_buffers(9)
• ksz_free_mem(9)
• send_packet(9)
• transmit_cleanup(9)
• tx_done(9)
• netdev_tx(9)
• netdev_tx_timeout(9)
• netdev_intr(9)
• netdev_close(9)
• netdev_open(9)
• netdev_query_statistics(9)
• netdev_set_mac_address(9)
• netdev_set_rx_mode(9)
• netdev_ioctl(9)
• mdio_read(9)
• mdio_write(9)
• netdev_get_link_ksettings(9)
• netdev_set_link_ksettings(9)
• netdev_nway_reset(9)
• netdev_get_link(9)
• netdev_get_drvinfo(9)
• netdev_get_regs_len(9)
• netdev_get_regs(9)
• netdev_get_wol(9)
• netdev_set_wol(9)
• netdev_get_msglevel(9)
• netdev_set_msglevel(9)
• netdev_get_eeprom_len(9)
• netdev_get_eeprom(9)
• netdev_set_eeprom(9)
• netdev_get_pauseparam(9)
• netdev_set_pauseparam(9)
• netdev_get_ringparam(9)
• netdev_get_strings(9)
• netdev_get_sset_count(9)
• netdev_get_ethtool_stats(9)
• netdev_set_features(9)
• dev_monitor(9)
• netdev_init(9)

---

ok that list was giving phone book 😭 but we got through it together, bestie. drink some water 💜

---

and that's the page!! mwah 💋 courtesy of the ./drivers/net/ethernet/micrel girlies, October 2026, for port_set_stp_state(9) — go set some spanning tree states, you absolute icon 🧚‍♀️✨👑