t3_wait_op_done_val(9)

🎀 t3_wait_op_done_val(9) 🎀

🌸 NAME 🌸

t3_wait_op_done_val — wait until an operation is completed. Yes bestie, that’s the whole NAME vibe, and this page is straight outta the Kernel API Manual 💖.

✨ SYNOPSIS ✨

int t3_wait_op_done_val (struct adapter *adapter , int reg , u32 mask ,
       int polarity , int attempts , int delay , u32 *valp );

🎀 ARGUMENTS 🎀

Okay so here’s the group chat, argument by argument:

• adapter — the adapter performing the operation.
• reg — the register to check for completion.
• mask — a single-bit field within reg that indicates completion.
• polarity — the value of the field when the operation is completed.
• attempts — number of check iterations.
• delay — delay in usecs between iterations.
• valp — where to store the value of the register at completion time.

💅 DESCRIPTION 💅

Okay bestie, the vibe check: wait until an operation is completed by checking a bit in a register up to attempts times. If valp is not NULL, the value of the register at the time it indicated completion is stored there. Returns 0 if the operation completes and -EAGAIN otherwise. No cap, that’s literally the behavior. 🔥

👀 SEE ALSO 👀

Kernel file: ./drivers/net/ethernet/chelsio/cxgb3/t3_hw.c — and then the whole squad of related references, periodt:

• t3_write_regs(9)
• t3_set_reg_field(9)
• t3_read_indirect(9)
• t3_mc7_bd_read(9)
• t3_mdio_change_bits(9)
• t3_phy_reset(9)
• t3_phy_advertise(9)
• t3_phy_advertise_fiber(9)
• t3_set_phy_speed_duplex(9)
• t3_seeprom_wp(9)
• get_vpd_params(9)
• sf1_read(9)
• sf1_write(9)
• flash_wait_op(9)
• t3_read_flash(9)
• t3_write_flash(9)
• t3_get_tp_version(9)
• t3_check_tpsram_version(9)
• t3_check_tpsram(9)
• t3_get_fw_version(9)
• t3_check_fw_version(9)
• t3_flash_erase_sectors(9)
• t3_load_fw(9)
• t3_cim_ctl_blk_read(9)
• t3_link_changed(9)
• t3_link_start(9)
• t3_set_vlan_accel(9)
• t3_handle_intr_status(9)
• t3_intr_enable(9)
• t3_intr_disable(9)
• t3_intr_clear(9)
• t3_port_intr_enable(9)
• t3_port_intr_disable(9)
• t3_port_intr_clear(9)
• t3_sge_write_context(9)
• clear_sge_ctxt(9)
• t3_sge_init_ecntxt(9)
• t3_sge_init_flcntxt(9)
• t3_sge_init_rspcntxt(9)
• t3_sge_init_cqcntxt(9)
• t3_sge_enable_ecntxt(9)
• t3_sge_disable_fl(9)
• t3_sge_disable_rspcntxt(9)
• t3_sge_disable_cqcntxt(9)
• t3_sge_cqcntxt_op(9)
• t3_config_rss(9)
• t3_tp_set_offload_mode(9)
• pm_num_pages(9)
• partition_mem(9)
• tp_set_timers(9)
• t3_tp_set_coalescing_size(9)
• t3_tp_set_max_rxsize(9)
• t3_load_mtus(9)
• t3_tp_get_mib_stats(9)
• t3_set_proto_sram(9)
• t3_config_sched(9)
• get_pci_mode(9)
• init_link_config(9)
• mc7_calc_size(9)

🫶 That’s a wrap, bestie! Source/version: ./drivers/net/ethernet/chelsio... · date: October 2026. Go wait on that op and slay 💅✨