t3_seeprom_wp(9)

💅 t3_seeprom_wp — bestie's guide to EEPROM write protection ✨

okay so we're in the t3_seeprom_wp(9) page, part of the Kernel API Manual, and honestly? it's a short one. a lil snack. a little bite-sized function that flips the write-protect switch on your serial EEPROM, and we're gonna get through it together 🫶

---

🌸 NAME 🌸

t3_seeprom_wp — enable/disable EEPROM write protection. that's the whole vibe. that's the job. no cap 💅

---

✨ SYNOPSIS ✨

int t3_seeprom_wp (struct adapter *adapter , int enable );

literally just two things: the adapter, and a yes/no. the way that's it. so simple. we love a low-effort king 👑

---

🎀 ARGUMENTS 🎀

• adapter — the adapter. that's it. that's the description. she's the adapter, she's the main character, she's the whole reason we're here 🦋
• enable — gimme a 1 to enable write protection, or a 0 to disable it. one or zero. binary baddie behavior fr fr 🔥

---

💖 DESCRIPTION 💖

so what it does is: enables or disables write protection on the serial EEPROM. that's the entire plot. no twist ending. write protection: on, or write protection: off. iconic, honestly 🌈

ngl bestie, if you're thinking "wait, is there more" — there is not. this function ate and then went home. periodt 💀

---

🧚 SEE ALSO 🧚

okay this is where it gets WILD, because the SEE ALSO section here is giving full group-chat energy. it's a whole friend group. everybody's invited. let's do a roll call 📋✨

first off, the kernel file she lives in:

./drivers/net/ethernet/chelsio/cxgb3/t3_hw.c

and then the whole squad, in order, no skips, no cap:

• t3_wait_op_done_val(9)
• t3_write_regs(9)
• t3_set_reg_field(9)
• t3_read_indirect(9)
• t3_mc7_bd_read(9)
• t3_mdio_change_bits(9)
• t3_phy_reset(9)
• t3_phy_advertise(9)
• t3_phy_advertise_fiber(9)
• t3_set_phy_speed_duplex(9)
• get_vpd_params(9)
• sf1_read(9)
• sf1_write(9)
• flash_wait_op(9)
• t3_read_flash(9)
• t3_write_flash(9)
• t3_get_tp_version(9)
• t3_check_tpsram_version(9)
• t3_check_tpsram(9)
• t3_get_fw_version(9)
• t3_check_fw_version(9)
• t3_flash_erase_sectors(9)
• t3_load_fw(9)
• t3_cim_ctl_blk_read(9)
• t3_link_changed(9)
• t3_link_start(9)
• t3_set_vlan_accel(9)
• t3_handle_intr_status(9)
• t3_intr_enable(9)
• t3_intr_disable(9)
• t3_intr_clear(9)
• t3_port_intr_enable(9)
• t3_port_intr_disable(9)
• t3_port_intr_clear(9)
• t3_sge_write_context(9)
• clear_sge_ctxt(9)
• t3_sge_init_ecntxt(9)
• t3_sge_init_flcntxt(9)
• t3_sge_init_rspcntxt(9)
• t3_sge_init_cqcntxt(9)
• t3_sge_enable_ecntxt(9)
• t3_sge_disable_fl(9)
• t3_sge_disable_rspcntxt(9)
• t3_sge_disable_cqcntxt(9)
• t3_sge_cqcntxt_op(9)
• t3_config_rss(9)
• t3_tp_set_offload_mode(9)
• pm_num_pages(9)
• partition_mem(9)
• tp_set_timers(9)
• t3_tp_set_coalescing_size(9)
• t3_tp_set_max_rxsize(9)
• t3_load_mtus(9)
• t3_tp_get_mib_stats(9)
• t3_set_proto_sram(9)
• t3_config_sched(9)
• get_pci_mode(9)
• init_link_config(9)
• mc7_calc_size(9)

like??? that's fifty-nine besties in one SEE ALSO. the way this page said "you WILL know the whole neighborhood" 😭💜 we stan a well-connected function.

---

mwah 💋 that's the whole page. we did it. we read the entire thing and nobody got hurt. this lil cutie comes to you from ./drivers/net/ethernet/chelsio... (the source, bestie, the source!) and she's dated October 2026 — so mark your calendars, she's an autumn girlie 🍓🍂 and yes, the footer still says t3_seeprom_wp(9) on both ends because she's consistent like that 👑✨