t3_port_intr_enable(9)

🎀 t3_port_intr_enable(9) 🎀

okay bestie, this one is from the Kernel API Manual and it’s literally about turning on port-specific interrupts. no cap, it’s a tiny little function with main character energy. 💅✨

🌸 NAME 🌸

t3_port_intr_enable — enable port-specific interrupts 🫶

⭐ SYNOPSIS ⭐

void t3_port_intr_enable (struct adapter *adapter , int idx );

🦋 ARGUMENTS 🦋

• adapter — associated adapter. like, the adapter this whole thing belongs to. 💖
• idx — index of port whose interrupts should be enabled. that’s the port you’re pointing at, bestie. 🎯

🔥 DESCRIPTION 🔥

Enable port-specific (i.e., MAC and PHY) interrupts for the given adapter port. That’s the vibe: you bring the adapter, you bring the port idx, and this function enables those port-specific interrupts. literally the whole plot. ✨

👑 SEE ALSO 👑

Kernel file: ./drivers/net/ethernet/chelsio/cxgb3/t3_hw.c — yes, that’s the one. 🧚

• t3_wait_op_done_val(9)
• t3_write_regs(9)
• t3_set_reg_field(9)
• t3_read_indirect(9)
• t3_mc7_bd_read(9)
• t3_mdio_change_bits(9)
• t3_phy_reset(9)
• t3_phy_advertise(9)
• t3_phy_advertise_fiber(9)
• t3_set_phy_speed_duplex(9)
• t3_seeprom_wp(9)
• get_vpd_params(9)
• sf1_read(9)
• sf1_write(9)
• flash_wait_op(9)
• t3_read_flash(9)
• t3_write_flash(9)
• t3_get_tp_version(9)
• t3_check_tpsram_version(9)
• t3_check_tpsram(9)
• t3_get_fw_version(9)
• t3_check_fw_version(9)
• t3_flash_erase_sectors(9)
• t3_load_fw(9)
• t3_cim_ctl_blk_read(9)
• t3_link_changed(9)
• t3_link_start(9)
• t3_set_vlan_accel(9)
• t3_handle_intr_status(9)
• t3_intr_enable(9)
• t3_intr_disable(9)
• t3_intr_clear(9)
• t3_port_intr_disable(9)
• t3_port_intr_clear(9)
• t3_sge_write_context(9)
• clear_sge_ctxt(9)
• t3_sge_init_ecntxt(9)
• t3_sge_init_flcntxt(9)
• t3_sge_init_rspcntxt(9)
• t3_sge_init_cqcntxt(9)
• t3_sge_enable_ecntxt(9)
• t3_sge_disable_fl(9)
• t3_sge_disable_rspcntxt(9)
• t3_sge_disable_cqcntxt(9)
• t3_sge_cqcntxt_op(9)
• t3_config_rss(9)
• t3_tp_set_offload_mode(9)
• pm_num_pages(9)
• partition_mem(9)
• tp_set_timers(9)
• t3_tp_set_coalescing_size(9)
• t3_tp_set_max_rxsize(9)
• t3_load_mtus(9)
• t3_tp_get_mib_stats(9)
• t3_set_proto_sram(9)
• t3_config_sched(9)
• get_pci_mode(9)
• init_link_config(9)
• mc7_calc_size(9)

and that’s the page, bestie 💖 the footer vibe is source/version ./drivers/net/ethernet/chelsio... and date October 2026, periodt. 🎀✨