t3_phy_advertise_fiber(9)

✨ t3_phy_advertise_fiber ✨

okay bestie, this is the Kernel API Manual page for t3_phy_advertise_fiber, and it's literally the fiber-PHY advertisement-register moment. 💅

🌸 NAME 🌸

t3_phy_advertise_fiber — set fiber PHY advertisement register. that's the whole name vibe, no cap. 🫶

🎀 SYNOPSIS 🎀

int t3_phy_advertise_fiber (struct cphy *phy , unsigned int advert );

💖 ARGUMENTS 💖

• phy — the PHY to operate on. that's the main character you're handing over. ✨
• advert — bitmap of capabilities the PHY should advertise. it's giving "here's what we're putting on the billboard" energy. 💅

🦋 DESCRIPTION 🦋

It sets a fiber PHY's advertisement register to advertise the requested capabilities. simple, iconic, done. 🌸

🔥 SEE ALSO 🔥

The Kernel file is literally right here: ./drivers/net/ethernet/chelsio/cxgb3/t3_hw.c 📁

And here's the whole SEE ALSO group chat, every reference kept exactly as-is, in order:

• t3_wait_op_done_val(9), t3_write_regs(9), t3_set_reg_field(9), t3_read_indirect(9), t3_mc7_bd_read(9), t3_mdio_change_bits(9)
• t3_phy_reset(9), t3_phy_advertise(9), t3_set_phy_speed_duplex(9), t3_seeprom_wp(9), get_vpd_params(9), sf1_read(9), sf1_write(9)
• flash_wait_op(9), t3_read_flash(9), t3_write_flash(9), t3_get_tp_version(9), t3_check_tpsram_version(9), t3_check_tpsram(9)
• t3_get_fw_version(9), t3_check_fw_version(9), t3_flash_erase_sectors(9), t3_load_fw(9), t3_cim_ctl_blk_read(9), t3_link_changed(9)
• t3_link_start(9), t3_set_vlan_accel(9), t3_handle_intr_status(9), t3_intr_enable(9), t3_intr_disable(9), t3_intr_clear(9)
• t3_port_intr_enable(9), t3_port_intr_disable(9), t3_port_intr_clear(9), t3_sge_write_context(9), clear_sge_ctxt(9), t3_sge_init_ecntxt(9)
• t3_sge_init_flcntxt(9), t3_sge_init_rspcntxt(9), t3_sge_init_cqcntxt(9), t3_sge_enable_ecntxt(9), t3_sge_disable_fl(9), t3_sge_disable_rspcntxt(9), t3_sge_disable_cqcntxt(9)
• t3_sge_cqcntxt_op(9), t3_config_rss(9), t3_tp_set_offload_mode(9), pm_num_pages(9), partition_mem(9), tp_set_timers(9)
• t3_tp_set_coalescing_size(9), t3_tp_set_max_rxsize(9), t3_load_mtus(9), t3_tp_get_mib_stats(9), t3_set_proto_sram(9), t3_config_sched(9)
• get_pci_mode(9), init_link_config(9), mc7_calc_size(9)

later, bestie 💖 — source/version corner ./drivers/net/ethernet/chelsio... and date October 2026, still repping t3_phy_advertise_fiber(9). 🫶