lpfc_nodev_tmo_init(9)

💅 lpfc_nodev_tmo_init(9) 💅

bestie, welcome to the Kernel API Manual — this page is all about <pink>lpfc_nodev_tmo_init</pink>, and it’s lowkey a little timeout-setting goblin. let’s get into it. ✨

🌸 NAME 🌸

lpfc_nodev_tmo_init — Set the hba nodev timeout value. 💖

🦋 SYNOPSIS 🦋

int lpfc_nodev_tmo_init (struct lpfc_vport *vport , int val );

🎀 ARGUMENTS 🎀

• vport — lpfc vport structure pointer. 🫶
• val — contains the nodev timeout value. ⏳

✨ DESCRIPTION ✨

okay so here’s the tea: if the devloss tmo is already set, then nodev tmo is set to devloss tmo, a kernel error message is printed, and zero is returned. no cap, that’s the first branch. 💅

else if val is in range, then nodev tmo and devloss tmo are set to val. otherwise, nodev tmo is set to the default value. that’s the whole flow, bestie. 🦋

💫 RETURN 💫

• 0 — zero if already set or if val is in range. 💖
• -EINVAL — if val is out of range. 💀

🌈 SEE ALSO 🌈

there’s a whole squad here, and yes every single one is part of the reference list:

• Kernel file: ./drivers/scsi/lpfc/lpfc_attr.c
• lpfc_jedec_to_ascii(9)
• lpfc_drvr_version_show(9)
• lpfc_enable_fip_show(9)
• lpfc_info_show(9)
• lpfc_serialnum_show(9)
• lpfc_temp_sensor_show(9)
• lpfc_modeldesc_show(9)
• lpfc_modelname_show(9)
• lpfc_programtype_show(9)
• lpfc_vportnum_show(9)
• lpfc_fwrev_show(9)
• lpfc_hdw_show(9)
• lpfc_option_rom_version_show(9)
• lpfc_link_state_show(9)
• lpfc_sli4_protocol_show(9)
• lpfc_oas_supported_show(9)
• lpfc_link_state_store(9)
• lpfc_num_discovered_ports_show(9)
• lpfc_issue_lip(9)
• lpfc_do_offline(9)
• lpfc_reset_pci_bus(9)
• lpfc_selective_reset(9)
• lpfc_issue_reset(9)
• lpfc_sli4_pdev_status_reg_wait(9)
• lpfc_sli4_pdev_reg_request(9)
• lpfc_nport_evt_cnt_show(9)
• lpfc_board_mode_show(9)
• lpfc_board_mode_store(9)
• lpfc_get_hba_info(9)
• lpfc_max_rpi_show(9)
• lpfc_used_rpi_show(9)
• lpfc_max_xri_show(9)
• lpfc_used_xri_show(9)
• lpfc_max_vpi_show(9)
• lpfc_used_vpi_show(9)
• lpfc_npiv_info_show(9)
• lpfc_poll_show(9)
• lpfc_poll_store(9)
• lpfc_sriov_hw_max_virtfn_show(9)
• lpfc_enable_bbcr_set(9)
• lpfc_wwn_set(9)
• lpfc_oas_tgt_show(9)
• lpfc_oas_tgt_store(9)
• lpfc_oas_priority_show(9)
• lpfc_oas_priority_store(9)
• lpfc_oas_vpt_show(9)
• lpfc_oas_vpt_store(9)
• lpfc_oas_lun_state_show(9)
• lpfc_oas_lun_state_store(9)
• lpfc_oas_lun_status_show(9)
• lpfc_oas_lun_state_set(9)
• lpfc_oas_lun_get_next(9)
• lpfc_oas_lun_state_change(9)
• lpfc_oas_lun_show(9)
• lpfc_oas_lun_store(9)
• lpfc_nodev_tmo_show(9)
• lpfc_update_rport_devloss_tmo(9)
• lpfc_nodev_tmo_set(9)
• lpfc_devloss_tmo_set(9)
• lpfc_tgt_queue_depth_set(9)
• lpfc_restrict_login_init(9)
• lpfc_restrict_login_set(9)
• lpfc_topology_store(9)
• lpfc_static_vport_show(9)
• lpfc_link_speed_store(9)
• lpfc_link_speed_init(9)
• lpfc_aer_support_store(9)
• lpfc_aer_cleanup_state(9)
• lpfc_sriov_nr_virtfn_store(9)
• lpfc_request_firmware_upgrade_store(9)
• lpfc_request_firmware_upgrade_init(9)
• lpfc_force_rscn_store(9)
• lpfc_force_rscn_init(9)
• lpfc_fcp_imax_store(9)
• lpfc_fcp_imax_init(9)
• lpfc_cq_max_proc_limit_store(9)
• lpfc_cq_max_proc_limit_init(9)
• lpfc_fcp_cpu_map_show(9)
• lpfc_fcp_cpu_map_store(9)
• lpfc_fcp_cpu_map_init(9)
• lpfc_cpumask_irq_mode_init(9)
• lpfc_irq_chann_show(9)
• lpfc_sg_seg_cnt_show(9)
• lpfc_sg_seg_cnt_init(9)
• sysfs_ctlreg_write(9)
• sysfs_ctlreg_read(9)
• sysfs_mbox_write(9)
• sysfs_mbox_read(9)
• lpfc_alloc_sysfs_attr(9)
• lpfc_free_sysfs_attr(9)
• lpfc_get_host_symbolic_name(9)
• lpfc_get_host_port_id(9)
• lpfc_get_host_port_type(9)
• lpfc_get_host_port_state(9)
• lpfc_get_host_speed(9)
• lpfc_get_host_fabric_name(9)
• lpfc_get_stats(9)
• lpfc_reset_stats(9)
• lpfc_get_enc_info(9)
• lpfc_get_node_by_target(9)
• lpfc_get_starget_port_id(9)
• lpfc_get_starget_node_name(9)
• lpfc_get_starget_port_name(9)
• lpfc_set_rport_loss_tmo(9)
• lpfc_set_vport_symbolic_name(9)
• lpfc_hba_log_verbose_init(9)
• lpfc_get_hba_function_mode(9)
• lpfc_get_cfgparam(9)
• lpfc_nvme_mod_param_dep(9)
• lpfc_get_vport_cfgparam(9)

okay bye bestie 💖 this page’s source/version is ./drivers/scsi/lpfc, it’s dated October 2026, and the manual name is lpfc_nodev_tmo_init(9) — periodt. 🌟