lpfc_get_enc_info(9)

🌸 NAME 🌸

okay bestie, this is lpfc_get_enc_info(9) from the Kernel API Manual, and the whole assignment is literally: lpfc_get_enc_info — return encryption information about the session for a given remote port. 💖

✨ SYNOPSIS ✨

struct fc_encryption_info * lpfc_get_enc_info (struct fc_rport *rport );

🎀 ARGUMENTS 🎀

• rport — ptr to fc_rport from scsi transport fc. that’s the whole input, bestie 🫶

💅 DESCRIPTION 💅

So picture this: you hand it an rport object, and it iterates through the fc_nodes list to find the node that corresponds with that rport. then it passes the encryption information from the node to the rport’s encryption attribute, so it can be reported to upper layers. 📣

the info is passed through the nlp_enc_info struct, which contains the encryption status. that’s the vibe ✨

🔥 RETURN 🔥

• the address of rport’s fc_encryption_info struct 👑
• NULL when it’s not found 😭

🦋 SEE ALSO 🦋

okay the SEE ALSO section is giving full squad energy, so buckle up. The Kernel file ./drivers/scsi/lpfc/lpfc_attr.c is literally in the mix, along with lpfc_jedec_to_ascii(9), lpfc_drvr_version_show(9), lpfc_enable_fip_show(9), lpfc_info_show(9), lpfc_serialnum_show(9), lpfc_temp_sensor_show(9), lpfc_modeldesc_show(9), lpfc_modelname_show(9), lpfc_programtype_show(9), lpfc_vportnum_show(9), lpfc_fwrev_show(9), lpfc_hdw_show(9), lpfc_option_rom_version_show(9), lpfc_link_state_show(9), lpfc_sli4_protocol_show(9), lpfc_oas_supported_show(9), lpfc_link_state_store(9), lpfc_num_discovered_ports_show(9), lpfc_issue_lip(9), lpfc_do_offline(9), lpfc_reset_pci_bus(9), lpfc_selective_reset(9), lpfc_issue_reset(9), lpfc_sli4_pdev_status_reg_wait(9), lpfc_sli4_pdev_reg_request(9), lpfc_nport_evt_cnt_show(9), lpfc_board_mode_show(9), lpfc_board_mode_store(9), lpfc_get_hba_info(9), lpfc_max_rpi_show(9), lpfc_used_rpi_show(9), lpfc_max_xri_show(9), lpfc_used_xri_show(9), lpfc_max_vpi_show(9), lpfc_used_vpi_show(9), lpfc_npiv_info_show(9), lpfc_poll_show(9), lpfc_poll_store(9), lpfc_sriov_hw_max_virtfn_show(9), lpfc_enable_bbcr_set(9), lpfc_wwn_set(9), lpfc_oas_tgt_show(9), lpfc_oas_tgt_store(9), lpfc_oas_priority_show(9), lpfc_oas_priority_store(9), lpfc_oas_vpt_show(9), lpfc_oas_vpt_store(9), lpfc_oas_lun_state_show(9), lpfc_oas_lun_state_store(9), lpfc_oas_lun_status_show(9), lpfc_oas_lun_state_set(9), lpfc_oas_lun_get_next(9), lpfc_oas_lun_state_change(9), lpfc_oas_lun_show(9), lpfc_oas_lun_store(9), lpfc_nodev_tmo_show(9), lpfc_nodev_tmo_init(9), lpfc_update_rport_devloss_tmo(9), lpfc_nodev_tmo_set(9), lpfc_devloss_tmo_set(9), lpfc_tgt_queue_depth_set(9), lpfc_restrict_login_init(9), lpfc_restrict_login_set(9), lpfc_topology_store(9), lpfc_static_vport_show(9), lpfc_link_speed_store(9), lpfc_link_speed_init(9), lpfc_aer_support_store(9), lpfc_aer_cleanup_state(9), lpfc_sriov_nr_virtfn_store(9), lpfc_request_firmware_upgrade_store(9), lpfc_request_firmware_upgrade_init(9), lpfc_force_rscn_store(9), lpfc_force_rscn_init(9), lpfc_fcp_imax_store(9), lpfc_fcp_imax_init(9), lpfc_cq_max_proc_limit_store(9), lpfc_cq_max_proc_limit_init(9), lpfc_fcp_cpu_map_show(9), lpfc_fcp_cpu_map_store(9), lpfc_fcp_cpu_map_init(9), lpfc_cpumask_irq_mode_init(9), lpfc_irq_chann_show(9), lpfc_sg_seg_cnt_show(9), lpfc_sg_seg_cnt_init(9), sysfs_ctlreg_write(9), sysfs_ctlreg_read(9), sysfs_mbox_write(9), sysfs_mbox_read(9), lpfc_alloc_sysfs_attr(9), lpfc_free_sysfs_attr(9), lpfc_get_host_symbolic_name(9), lpfc_get_host_port_id(9), lpfc_get_host_port_type(9), lpfc_get_host_port_state(9), lpfc_get_host_speed(9), lpfc_get_host_fabric_name(9), lpfc_get_stats(9), lpfc_reset_stats(9), lpfc_get_node_by_target(9), lpfc_get_starget_port_id(9), lpfc_get_starget_node_name(9), lpfc_get_starget_port_name(9), lpfc_set_rport_loss_tmo(9), lpfc_set_vport_symbolic_name(9), lpfc_hba_log_verbose_init(9), lpfc_get_hba_function_mode(9), lpfc_get_cfgparam(9), lpfc_nvme_mod_param_dep(9), and lpfc_get_vport_cfgparam(9). iykyk 💜

mwah 💋 — this page is from ./drivers/scsi/lpfc, dated October 2026, and it’s the lpfc_get_enc_info(9) manual. bye bestie 🫶