section 9 · Kernel routines 🧠

87928 pages · page 9 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

# (continued)

_omap4_update_context_lost(9)increment hwmod context loss counter if hwmod context was lost, and clear hardware context loss reg✨
_omap4_wait_target_disable(9)wait for a module to be disabled on OMAP4✨
_omap4_wait_target_ready(9)wait for a module to leave slave idle✨
_omap_calculate_ecc_bch(9)Generate ECC bytes for one sector✨
_omap_device_enable_hwmods(9)call omap_hwmod_enable() on all hwmods✨
_omap_device_idle_hwmods(9)call omap_hwmod_idle() on all hwmods✨
_opp_add_static_v2(9)Allocate static OPPs (As per 'v2' DT bindings)✨
_opp_add_v1(9)Allocate a OPP based on v1 bindings.✨
_opp_set_availability(9)helper to set the availability of an opp✨
_parse_integer_limit(9)Convert integer string representation to an integer✨
_pci_add_cap_save_buffer(9)allocate buffer for saving given capability registers✨
_PHOLD(9)hold a process✨
_PHOLD(9freebsd)hold a process✨
_phy_start_aneg(9)start auto-negotiation for this PHY device✨
_pmcraid_fire_command(9)sends an IOA command to adapter✨
_pmcraid_io_done(9)helper for pmcraid_io_done function✨
_PRELE(9)hold a process✨
_PRELE(9freebsd)hold a process✨
_pse_pi_delivery_power_sw_pw_ctrl(9)Enable PSE PI in case of software power control. Assumes the PSE lock has been acquired.✨
_pse_pi_disable(9)Call disable operation. Assumes the PSE lock has been acquired.✨
_pte(9)Useful constructor for union pte✨
_pwrdm_register(9)register a powerdomain✨
_pwrdm_restore_clkdm_state(9)restore the clkdm hwsup state after pwrst change✨
_pwrdm_save_clkdm_state_and_activate(9)prepare for power state change✨
_qed_cxt_acquire_cid(9)Acquire a new cid of a specific protocol type for a vf-queue.✨
_qed_cxt_release_cid(9)Release a cid belonging to a vf-queue.✨
_read_hardreset(9)read the HW reset line state of submodules contained in the hwmod module✨
_register(9)register a struct omap_hwmod✨
_register_dpll(9)low level registration of a DPLL clock✨
_register_dpll_x2(9)Registers a DPLLx2 clock✨
_register_link(9)register a struct omap_hwmod_ocp_if✨
_regulator_check_status_enabled(9)check if regulator status can be interpreted as "regulator is enabled"✨
_regulator_get_common(9)Common code for regulator requests✨
_regulator_handle_consumer_disable(9)handle that a consumer disabled✨
_regulator_handle_consumer_enable(9)handle that a consumer enabled✨
_remove_hidden_choices(9)Remove hidden choices from aggregate data✨
_reset(9)reset an omap_hwmod✨
_resolve_clkdm_deps(9)resolve clkdm_names in @clkdm_deps to clkdms✨
_rt2x00_desc_read(9)Read a word from the hardware descriptor.✨
_rvt_reset_qp(9)initialize the QP state to the reset state✨
_save_mpu_port_index(9)find and save the index to @oh's MPU port✨
_sci_clk_build(9)Gets a handle for an SCI clock✨
_scsi_send_scsi_io(9)send internal SCSI_IO to target✨
_scsih_add_device(9)creating sas device object✨
_scsih_add_or_del_phys_from_existing_port(9)add/remove phy to/from right port✨
_scsih_alloc_vphy(9)allocate virtual_phy object✨
_scsih_ata_pass_thru_idd(9)obtain SATA device Identify Device Data✨
_scsih_block_io_all_device(9)set the device state to SDEV_BLOCK✨
_scsih_block_io_device(9)set the device state to SDEV_BLOCK✨
_scsih_block_io_to_children_attached_directly(9)✨
_scsih_block_io_to_children_attached_to_ex(9)✨
_scsih_block_io_to_pcie_children_attached_directly(9)✨
_scsih_check_access_status(9)check access flags✨
_scsih_check_device(9)checking device responsiveness✨
_scsih_check_for_pending_tm(9)check for pending task management✨
_scsih_check_ir_config_unhide_events(9)check for UNHIDE events✨
_scsih_check_pcie_access_status(9)check access flags✨
_scsih_check_pcie_topo_remove_events(9)sanity check on topo events✨
_scsih_check_topo_delete_events(9)sanity check on topo events✨
_scsih_check_volume_delete_events(9)set delete flag for volumes✨
_scsih_complete_devices_scanning(9)add the devices to sml and complete ioc initialization.✨
_scsih_create_enclosure_list_after_reset(9)Free Existing list, And create enclosure list by scanning all Enclosure Page(0)s✨
_scsih_del_dirty_port_entries(9)delete dirty port entries from port list after host reset✨
_scsih_del_dirty_vphy(9)delete virtual_phy objects marked as dirty.✨
_scsih_del_phy_part_of_anther_port(9)remove phy if it is a part of anther port✨
_scsih_determine_boot_device(9)determine boot device.✨
_scsih_determine_disposition(9)✨
_scsih_determine_hba_mpi_version(9)determine in which MPI version class this device belongs to.✨
_scsih_device_remove_by_handle(9)removing device object by handle✨
_scsih_display_enclosure_chassis_info(9)display device location info✨
_scsih_display_sata_capabilities(9)sata capabilities✨
_scsih_done(9)internal SCSI_IO callback handler.✨
_scsih_eedp_error_handling(9)return sense code for EEDP errors✨
_scsih_enable_tlr(9)setting TLR flags✨
_scsih_error_recovery_delete_devices(9)remove devices not responding✨
_scsih_expander_add(9)creating expander object✨
_scsih_expander_node_add(9)insert expander device to the list.✨
_scsih_expander_node_remove(9)removing expander device from list.✨
_scsih_flush_running_cmds(9)completing outstanding commands.✨
_scsih_fw_event_add(9)insert and queue up fw_event✨
_scsih_fw_event_cleanup_queue(9)cleanup event queue✨
_scsih_fw_event_del_from_list(9)delete fw_event from the list✨
_scsih_fw_event_requeue(9)requeue an event✨
_scsih_get_port_table_after_reset(9)Construct temporary port table✨
_scsih_get_sas_address(9)set the sas_address for given device handle✨
_scsih_get_shost_and_ioc(9)get shost and ioc and verify whether they are NULL or not✨
_scsih_get_volume_capabilities(9)volume capabilities✨
_scsih_internal_device_block(9)block the sdev device✨
_scsih_internal_device_unblock(9)unblock the sdev device✨
_scsih_io_done(9)scsi request callback✨
_scsih_ir_fastpath(9)turn on fastpath for IR physdisk✨
_scsih_ir_shutdown(9)IR shutdown notification✨
_scsih_is_boot_device(9)search for matching boot device.✨
_scsih_is_end_device(9)determines if device is an end device✨
_scsih_is_nvme_pciescsi_device(9)determines if device is an pcie nvme/scsi device✨
_scsih_issue_delayed_event_ack(9)issue delayed Event ACK messages✨
_scsih_issue_delayed_sas_io_unit_ctrl(9)issue delayed sas_io_unit_ctrl messages✨
_scsih_look_and_get_matched_port_entry(9)Get matched hba port entry from HBA port table✨
_scsih_mark_responding_expander(9)mark a expander as responding✨
_scsih_mark_responding_pcie_device(9)mark a pcie_device as responding✨
_scsih_mark_responding_raid_device(9)mark a raid_device as responding✨
_scsih_mark_responding_sas_device(9)mark a sas_devices as responding✨
_scsih_normalize_sense(9)normalize descriptor and fixed format sense data✨
_scsih_nvme_shutdown(9)NVMe shutdown notification✨
_scsih_pcie_add_device(9)creating pcie device object✨
_scsih_pcie_check_device(9)checking device responsiveness✨
_scsih_pcie_device_add(9)add pcie_device object✨
_scsih_pcie_device_remove(9)remove pcie_device from list.✨
_scsih_pcie_device_remove_by_handle(9)removing pcie device object by handle✨
_scsih_pcie_device_remove_from_sml(9)removing pcie device from SML and free up associated memory✨
_scsih_pcie_device_status_change_event(9)handle device status change✨
_scsih_pcie_device_status_change_event_debug(9)debug for device event✨
_scsih_pcie_enumeration_event(9)handle enumeration events✨
_scsih_pcie_topology_change_event(9)handle PCIe topology changes✨
_scsih_pcie_topology_change_event_debug(9)debug for topology event✨
_scsih_prep_device_scan(9)initialize parameters prior to device scan✨
_scsih_probe(9)attach and add scsi host✨
_scsih_probe_boot_devices(9)reports 1st device✨
_scsih_probe_devices(9)probing for devices✨
_scsih_probe_pcie(9)reporting PCIe devices to scsi-ml✨
_scsih_probe_raid(9)reporting raid volumes to scsi-ml✨
_scsih_probe_sas(9)reporting sas devices to sas transport✨
_scsih_raid_device_add(9)add raid_device object✨
_scsih_raid_device_find_by_id(9)raid device search✨
_scsih_raid_device_find_by_wwid(9)raid device search✨
_scsih_raid_device_remove(9)delete raid_device object✨
_scsih_remove_device(9)removing sas device object✨
_scsih_remove_unresponding_devices(9)removing unresponding devices✨
_scsih_report_luns(9)send REPORT_LUNS to target✨
_scsih_reprobe_lun(9)reprobing lun✨
_scsih_response_code(9)translation of device response code✨
_scsih_sas_broadcast_primitive_event(9)handle broadcast events✨
_scsih_sas_control_complete(9)completion routine✨
_scsih_sas_device_add(9)insert sas_device to the list.✨
_scsih_sas_device_discovery_error_event(9)display SAS device discovery error events✨
_scsih_sas_device_init_add(9)insert sas_device to the list.✨
_scsih_sas_device_remove(9)remove sas_device from list.✨
_scsih_sas_device_status_change_event(9)handle device status change✨
_scsih_sas_device_status_change_event_debug(9)debug for device event✨
_scsih_sas_discovery_event(9)handle discovery events✨
_scsih_sas_enclosure_dev_status_change_event(9)handle enclosure events✨
_scsih_sas_enclosure_dev_status_change_event_debug(9)debug for enclosure event✨
_scsih_sas_host_add(9)create sas host object✨
_scsih_sas_host_refresh(9)refreshing sas host object contents✨
_scsih_sas_ir_config_change_event(9)handle ir configuration change events✨
_scsih_sas_ir_config_change_event_debug(9)debug for IR Config Change events✨
_scsih_sas_ir_operation_status_event(9)handle RAID operation events✨
_scsih_sas_ir_operation_status_event_debug(9)debug for IR op event✨
_scsih_sas_ir_physical_disk_event(9)PD event✨
_scsih_sas_ir_volume_event(9)IR volume event✨
_scsih_sas_pd_add(9)remove pd component✨
_scsih_sas_pd_delete(9)delete pd component✨
_scsih_sas_pd_expose(9)expose pd component to /dev/sdX✨
_scsih_sas_pd_hide(9)hide pd component from /dev/sdX✨
_scsih_sas_port_refresh(9)Update HBA port table after host reset✨
_scsih_sas_topology_change_event(9)handle topology changes✨
_scsih_sas_topology_change_event_debug(9)debug for topology event✨
_scsih_sas_volume_add(9)add new volume✨
_scsih_sas_volume_delete(9)delete volume✨
_scsih_scan_for_devices_after_reset(9)scan for devices after host reset✨
_scsih_scsi_ioc_info(9)translated non-successful SCSI_IO request✨
_scsih_scsi_lookup_find_by_lun(9)search for matching channel:id:lun✨
_scsih_scsi_lookup_find_by_target(9)search for matching channel:id✨
_scsih_search_responding_expanders(9)✨
_scsih_search_responding_pcie_devices(9)✨
_scsih_search_responding_raid_devices(9)✨
_scsih_search_responding_sas_devices(9)✨
_scsih_send_event_to_turn_on_pfa_led(9)fire delayed event✨
_scsih_set_debug_level(9)global setting of ioc->logging_level.✨
_scsih_set_fwfault_debug(9)global setting of ioc->fwfault_debug.✨
_scsih_set_level(9)set raid level✨
_scsih_set_nvme_max_shutdown_latency(9)Update max_shutdown_latency.✨
_scsih_set_volume_delete_flag(9)setting volume delete flag✨
_scsih_set_volume_handle_for_tr(9)set handle for target reset to volume✨
_scsih_setup_eedp(9)setup MPI request for EEDP transfer✨
_scsih_smart_predicted_fault(9)process smart errors✨
_scsih_srch_boot_device_name(9)search based on device name✨
_scsih_srch_boot_encl_slot(9)search based on enclosure_logical_id/slot✨
_scsih_srch_boot_sas_address(9)search based on sas_address✨
_scsih_start_unit(9)send START_UNIT to target✨
_scsih_temp_threshold_events(9)display temperature threshold exceeded events✨
_scsih_test_unit_ready(9)send TUR to target✨
_scsih_tm_display_info(9)displays info about the device✨
_scsih_tm_done(9)tm completion routine✨
_scsih_tm_tr_complete(9)✨
_scsih_tm_tr_send(9)send task management request✨
_scsih_tm_tr_volume_send(9)send target reset request for volumes✨
_scsih_tm_volume_tr_complete(9)target reset completion✨
_scsih_turn_off_pfa_led(9)turn off Fault LED✨
_scsih_turn_on_pfa_led(9)illuminate PFA LED✨
_scsih_ublock_io_all_device(9)unblock every device✨
_scsih_ublock_io_device(9)prepare device to be deleted✨
_scsih_ublock_io_device_wait(9)unblock IO for target✨
_scsih_update_device_qdepth(9)Update QD during Reset.✨
_scsih_update_vphys_after_reset(9)update the Port's vphys_list after reset✨
_scsih_wait_for_device_to_become_ready(9)handle busy devices✨
_scsih_wait_for_target_to_become_ready(9)handle busy devices✨
_sdma_engine_progress_schedule(9)schedule progress on engine✨
_set_clockactivity(9)set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v✨
_set_dmadisable(9)set OCP_SYSCONFIG.DMADISABLE bit in @v✨