_omap4_wait_target_disable(9)

🎀 NAME 🎀

Hey bestie 💖 this is the _omap4_wait_target_disable(9) page, straight out of the Kernel API Manual, and it does exactly what the name says: wait for a module to be disabled on OMAP4 ✨

✨ SYNOPSIS ✨

int _omap4_wait_target_disable (struct omap_hwmod *oh );

🌸 ARGUMENTS 🌸

• oh — struct omap_hwmod *

💅 DESCRIPTION 💅

Okay so here's the vibe: wait for a module oh to enter slave idle 🫶

It returns 0 if the module does not have an IDLEST bit, or if the module successfully enters slave idle. Otherwise, it passes along the return value of the appropriate *_cm*_wait_module_idle function. No cap, that's literally the whole behavior 😌

🦋 SEE ALSO 🦋

Run, don't walk, to these cross-refs, bestie 👑 First up, the Kernel file ./arch/arm/mach-omap2/omap_hwmod.c, and then the whole iconic lineup:

• struct clkctrl_provider(9)
• struct omap_hwmod_reset(9)
• struct omap_hwmod_soc_ops(9)
• _update_sysc_cache(9)
• _write_sysconfig(9)
• _set_master_standbymode(9)
• _set_slave_idlemode(9)
• _set_clockactivity(9)
• _set_softreset(9)
• _clear_softreset(9)
• _wait_softreset_complete(9)
• _set_dmadisable(9)
• _set_module_autoidle(9)
• _enable_wakeup(9)
• _add_initiator_dep(9)
• _del_initiator_dep(9)
• _init_main_clk(9)
• _init_interface_clks(9)
• _init_opt_clks(9)
• _enable_clocks(9)
• _omap4_clkctrl_managed_by_clkfwk(9)
• _omap4_has_clkctrl_clock(9)
• _disable_clocks(9)
• _omap4_enable_module(9)
• _save_mpu_port_index(9)
• _find_mpu_rt_port(9)
• _enable_sysc(9)
• _idle_sysc(9)
• _shutdown_sysc(9)
• _lookup(9)
• _init_clkdm(9)
• _init_clocks(9)
• _lookup_hardreset(9)
• _assert_hardreset(9)
• _deassert_hardreset(9)
• _read_hardreset(9)
• _are_all_hardreset_lines_asserted(9)
• _are_any_hardreset_lines_asserted(9)
• _omap4_disable_module(9)
• _ocp_softreset(9)
• _reset(9)
• _omap4_update_context_lost(9)
• _omap4_get_context_lost(9)
• _enable(9)
• _idle(9)
• _shutdown(9)
• of_dev_hwmod_lookup(9)
• omap_hwmod_fix_mpu_rt_idx(9)
• omap_hwmod_parse_module_range(9)
• _init_mpu_rt_base(9)
• _init(9)
• _setup_iclk_autoidle(9)
• _setup_reset(9)
• _setup_postsetup(9)
• _setup(9)
• _register(9)
• _add_link(9)
• _register_link(9)
• _omap2xxx_3xxx_wait_target_ready(9)
• _omap4_wait_target_ready(9)
• _omap2_assert_hardreset(9)
• _omap2_deassert_hardreset(9)
• _omap2_is_hardreset_asserted(9)
• _omap4_assert_hardreset(9)
• _omap4_deassert_hardreset(9)
• _omap4_is_hardreset_asserted(9)
• _omap4_disable_direct_prcm(9)
• _am33xx_deassert_hardreset(9)
• omap_hwmod_softreset(9)
• omap_hwmod_lookup(9)
• omap_hwmod_for_each(9)
• omap_hwmod_register_links(9)
• _ensure_mpu_hwmod_is_setup(9)
• omap_hwmod_setup_one(9)
• omap_hwmod_check_sysc(9)
• omap_hwmod_init_regbits(9)
• omap_hwmod_init_reg_offs(9)
• omap_hwmod_init_sysc_flags(9)
• omap_hwmod_init_idlemodes(9)
• omap_hwmod_check_module(9)
• omap_hwmod_allocate_module(9)
• omap_hwmod_init_module(9)
• omap_hwmod_setup_earlycon_flags(9)
• omap_hwmod_setup_all(9)
• omap_hwmod_enable(9)
• omap_hwmod_idle(9)
• omap_hwmod_shutdown(9)
• omap_hwmod_get_mpu_rt_va(9)
• omap_hwmod_assert_hardreset(9)
• omap_hwmod_deassert_hardreset(9)
• omap_hwmod_for_each_by_class(9)
• omap_hwmod_set_postsetup_state(9)
• omap_hwmod_init(9)

Okay that's the whole page, bestie 🫶 — big kiss from the Kernel API Manual, source ./arch/arm/mach-omap2, dated October 2026, and yes the star of the show is _omap4_wait_target_disable(9) 💅✨