_scsih_set_...andle_for_tr(9)

✨ _scsih_set_volume_handle_for_tr ✨ (from the Kernel API Manual, bestie 💅)

okay so picture this: you're deep in the kernel API manual, section 9, and you've stumbled onto _scsih_set_...andle_for_tr. Welcome, you're gonna love it here 🫶

---

🌸 NAME 🌸

_scsih_set_volume_handle_for_tr — set handle for target reset to volume ✨

Like, that's the whole vibe. It sets a handle. For target reset. To a volume. Iconic behavior, no notes.

---

🎀 SYNOPSIS 🎀

void _scsih_set_volume_handle_for_tr (u16 handle , u16 *a , u16 *b );

yes the signature is literally that. copy it exactly, she's sensitive 💅

---

🦋 ARGUMENTS 🦋

• handle — the input handle 🎯 this is the one you're bringing to the party.
• a — handle for volume a 💖
• b — handle for volume b 💖

---

⭐ DESCRIPTION ⭐

okay so here's the tea, bestie ☕

IR firmware only supports two raid volumes. that's it. two. the firmware said "two is plenty" and honestly? respect.

The purpose of this routine is to set the volume handle in either a or b. The way it works is: when the given input handle is non-zero, or when a and b have not been set before. That's the condition. That's the whole routine. She's a tiny little matchmaker for handles and volume slots 🧚

no cap, this one is short and sweet — but every word in it is load-bearing, so don't skip the condition on when it does the thing 👑

---

🔥 SEE ALSO 🔥

okay this section is long and I need you to stay with me, bestie 😭 the whole mpt3sas extended family showed up to the group chat:

Kernel file ./drivers/scsi/mpt3sas/mpt3sas_scsih.c — that's the home base 🏠 and the enum/struct crew: enum device_responsive_state(9), struct sense_info(9), struct fw_event_work(9), struct _scsi_io_transfer(9).

and now… the functions. all of them. brace yourself 💀

_scsih_set_debug_level(9), _scsih_srch_boot_sas_address(9), _scsih_srch_boot_device_name(9), _scsih_srch_boot_encl_slot(9), mpt3sas_get_port_by_id(9), mpt3sas_get_vphy_by_phy(9), _scsih_is_boot_device(9), _scsih_get_sas_address(9), _scsih_determine_boot_device(9), mpt3sas_get_pdev_from_target(9), __mpt3sas_get_sdev_by_rphy(9), __mpt3sas_get_sdev_by_addr(9), mpt3sas_get_sdev_by_addr(9), mpt3sas_get_sdev_by_handle(9), _scsih_display_enclosure_chassis_info(9), _scsih_sas_device_remove(9), _scsih_device_remove_by_handle(9), mpt3sas_device_remove_by_sas_address(9), _scsih_sas_device_add(9), _scsih_sas_device_init_add(9), mpt3sas_get_pdev_by_wwid(9), mpt3sas_get_pdev_by_handle(9), _scsih_set_nvme_max_shutdown_latency(9), _scsih_pcie_device_remove(9), _scsih_pcie_device_remove_by_handle(9), _scsih_pcie_device_add(9), _scsih_raid_device_find_by_id(9), mpt3sas_raid_device_find_by_handle(9), _scsih_raid_device_find_by_wwid(9), _scsih_raid_device_add(9), _scsih_raid_device_remove(9), mpt3sas_scsih_expander_find_by_handle(9), mpt3sas_scsih_enclosure_find_by_handle(9), mpt3sas_scsih_expander_find_by_sas_address(9), _scsih_expander_node_add(9), _scsih_is_end_device(9), _scsih_is_nvme_pciescsi_device(9), _scsih_scsi_lookup_find_by_target(9), _scsih_scsi_lookup_find_by_lun(9), mpt3sas_scsih_scsi_lookup_get(9), scsih_change_queue_depth(9), mpt3sas_scsih_change_queue_depth(9), scsih_target_alloc(9), scsih_target_destroy(9), scsih_sdev_init(9), scsih_sdev_destroy(9), _scsih_display_sata_capabilities(9), scsih_is_raid(9), scsih_get_resync(9), scsih_get_state(9), _scsih_set_level(9), _scsih_get_volume_capabilities(9), _scsih_enable_tlr(9), scsih_sdev_configure(9), scsih_bios_param(9), _scsih_response_code(9), _scsih_tm_done(9), mpt3sas_scsih_set_tm_flag(9), mpt3sas_scsih_clear_tm_flag(9), scsih_tm_cmd_map_status(9), scsih_tm_post_processing(9), mpt3sas_scsih_issue_tm(9), _scsih_tm_display_info(9), scsih_abort(9), scsih_dev_reset(9), scsih_target_reset(9), scsih_host_reset(9), _scsih_fw_event_add(9), _scsih_fw_event_del_from_list(9), _scsih_fw_event_requeue(9), _scsih_error_recovery_delete_devices(9), mpt3sas_port_enable_complete(9), _scsih_fw_event_cleanup_queue(9), _scsih_internal_device_block(9), _scsih_internal_device_unblock(9), _scsih_ublock_io_all_device(9), _scsih_ublock_io_device_wait(9), _scsih_ublock_io_device(9), _scsih_block_io_all_device(9), _scsih_block_io_device(9), _scsih_block_io_to_children_attached_to_ex(9), _scsih_block_io_to_children_attached_directly(9), _scsih_block_io_to_pcie_children_attached_directly(9), _scsih_tm_tr_send(9), _scsih_tm_tr_complete(9), _scsih_sas_control_complete(9), _scsih_tm_tr_volume_send(9), _scsih_tm_volume_tr_complete(9), _scsih_issue_delayed_event_ack(9), _scsih_issue_delayed_sas_io_unit_ctrl(9), mpt3sas_check_for_pending_internal_cmds(9), _scsih_check_for_pending_tm(9), _scsih_check_topo_delete_events(9), _scsih_check_pcie_topo_remove_events(9), _scsih_set_volume_delete_flag(9), _scsih_check_ir_config_unhide_events(9), _scsih_check_volume_delete_events(9), _scsih_temp_threshold_events(9), _scsih_flush_running_cmds(9), _scsih_setup_eedp(9), _scsih_eedp_error_handling(9), scsih_qcmd(9), _scsih_normalize_sense(9), _scsih_scsi_ioc_info(9), _scsih_turn_on_pfa_led(9), _scsih_turn_off_pfa_led(9), _scsih_send_event_to_turn_on_pfa_led(9), _scsih_smart_predicted_fault(9), _scsih_io_done(9), _scsih_update_vphys_after_reset(9), _scsih_get_port_table_after_reset(9), _scsih_look_and_get_matched_port_entry(9), _scsih_del_phy_part_of_anther_port(9), _scsih_add_or_del_phys_from_existing_port(9), _scsih_del_dirty_vphy(9), _scsih_del_dirty_port_entries(9), _scsih_sas_port_refresh(9), _scsih_alloc_vphy(9), _scsih_sas_host_refresh(9), _scsih_sas_host_add(9), _scsih_expander_add(9), mpt3sas_expander_remove(9), _scsih_done(9), _scsi_send_scsi_io(9), _scsih_determine_disposition(9), _scsih_report_luns(9), _scsih_start_unit(9), _scsih_test_unit_ready(9), _scsih_ata_pass_thru_idd(9), _scsih_wait_for_device_to_become_ready(9), _scsih_wait_for_target_to_become_ready(9), _scsih_check_access_status(9), _scsih_check_device(9), _scsih_add_device(9), _scsih_remove_device(9), _scsih_sas_topology_change_event_debug(9), _scsih_sas_topology_change_event(9), _scsih_sas_device_status_change_event_debug(9), _scsih_sas_device_status_change_event(9), _scsih_check_pcie_access_status(9), _scsih_pcie_device_remove_from_sml(9), _scsih_pcie_check_device(9), _scsih_pcie_add_device(9), _scsih_pcie_topology_change_event_debug(9), _scsih_pcie_topology_change_event(9), _scsih_pcie_device_status_change_event_debug(9), _scsih_pcie_device_status_change_event(9), _scsih_sas_enclosure_dev_status_change_event_debug(9), _scsih_sas_enclosure_dev_status_change_event(9), _scsih_sas_broadcast_primitive_event(9), _scsih_sas_discovery_event(9), _scsih_sas_device_discovery_error_event(9), _scsih_pcie_enumeration_event(9), _scsih_ir_fastpath(9), _scsih_reprobe_lun(9), _scsih_sas_volume_add(9), _scsih_sas_volume_delete(9), _scsih_sas_pd_expose(9), _scsih_sas_pd_hide(9), _scsih_sas_pd_delete(9), _scsih_sas_pd_add(9), _scsih_sas_ir_config_change_event_debug(9), _scsih_sas_ir_config_change_event(9), _scsih_sas_ir_volume_event(9), _scsih_sas_ir_physical_disk_event(9), _scsih_sas_ir_operation_status_event_debug(9), _scsih_sas_ir_operation_status_event(9), _scsih_prep_device_scan(9), _scsih_update_device_qdepth(9), _scsih_mark_responding_sas_device(9), _scsih_create_enclosure_list_after_reset(9), _scsih_search_responding_sas_devices(9), _scsih_mark_responding_pcie_device(9), _scsih_search_responding_pcie_devices(9), _scsih_mark_responding_raid_device(9), _scsih_search_responding_raid_devices(9), _scsih_mark_responding_expander(9), _scsih_search_responding_expanders(9), _scsih_remove_unresponding_devices(9), _scsih_scan_for_devices_after_reset(9), mpt3sas_scsih_pre_reset_handler(9), mpt3sas_scsih_clear_outstanding_scsi_tm_commands(9), mpt3sas_scsih_reset_done_handler(9), _mpt3sas_fw_work(9), _firmware_event_work(9), mpt3sas_scsih_event_callback(9), _scsih_expander_node_remove(9), _scsih_nvme_shutdown(9), _scsih_ir_shutdown(9), _scsih_get_shost_and_ioc(9), scsih_remove(9), scsih_shutdown(9), _scsih_probe_boot_devices(9), _scsih_probe_raid(9), _scsih_probe_sas(9), get_next_pcie_device(9), pcie_device_make_active(9), _scsih_probe_pcie(9), _scsih_probe_devices(9), scsih_scan_start(9), _scsih_complete_devices_scanning(9), scsih_scan_finished(9), scsih_map_queues(9), _scsih_determine_hba_mpi_version(9), _scsih_probe(9), scsih_suspend(9), scsih_resume(9), scsih_pci_error_detected(9), scsih_pci_slot_reset(9), scsih_pci_resume(9), scsih_pci_mmio_enabled(9), scsih_init(9), scsih_exit(9), _mpt3sas_init(9), _mpt3sas_exit(9)

like… that's the whole friend group 😭 every single one of them, no gatekeeping, no "and others." we list everybody here 🫶

---

okay that's the page, bestie! 💖 this one came from ./drivers/scsi/mpt3sas, dated October 2026 — go forth and set those volume handles, you absolute icon 👑✨