section 9 · Kernel routines 🧠

87928 pages · page 141 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

H (continued)

HuC(9)✨
HuC Memory Management(9)✨
huge_pmd_unshare(9)Unmap a pmd table if it is shared by multiple users✨
hugetlb_alloc_folio(9)Allocate a hugetlb folio.✨
hugetlb_linear_page_index(9)linear_page_index() but in hugetlb page size granularity.✨
hugetlb_vmemmap_optimize_folio(9)optimize @folio's vmemmap pages.✨
hugetlb_vmemmap_restore_folio(9)restore previously optimized (by hugetlb_vmemmap_optimize_folio()) vmemmap pages which will be reallocated and remapped.✨
hugetlb_vmemmap_restore_folios(9)restore vmemmap for every folio on the list.✨
humanize_number(9)human readable numbers✨
hung_task_info(9)Print diagnostic details for a hung task✨
hv_allocate_config_window(9)Find MMIO space for PCI Config✨
hv_balloon_debug_show(9)shows statistics of balloon operations.✨
hv_compose_msi_msg(9)Supplies a valid MSI address/data✨
hv_cpu_number_to_vp_number(9)Map CPU to VP.✨
hv_create_ring_sysfs(9)create "ring" sysfs entry corresponding to ring buffers for a channel.✨
hv_eject_device_work(9)Asynchronously handles ejection✨
hv_irq_retarget_interrupt(9)"Unmask" the IRQ by setting its current affinity.✨
hv_msi_free(9)Free the MSI.✨
hv_pci_allocate_bridge_windows(9)Allocate memory regions for the bus✨
hv_pci_devices_present(9)Handle list of new children✨
hv_pci_devices_present2(9)Handle list of new children✨
hv_pci_eject_device(9)Handles device ejection✨
hv_pci_enter_d0(9)Bring the "bus" into the D0 power state✨
hv_pci_free_bridge_windows(9)Release memory regions for the bus✨
hv_pci_generic_compl(9)Invoked for a completion packet✨
hv_pci_onchannelcallback(9)Handles incoming packets✨
hv_pci_probe(9)New VMBus channel probe, for a root PCI bus✨
hv_pci_protocol_negotiation(9)Set up protocol✨
hv_pci_query_relations(9)Ask host to send list of child devices✨
hv_pci_read_config_compl(9)Invoked when a response packet for a read config block operation arrives.✨
hv_pci_remove(9)Remove routine for this VMBus channel✨
hv_pci_start_relations_work(9)Queue work to start device discovery✨
hv_pci_write_config_compl(9)Invoked when a response packet for a write config block operation arrives.✨
hv_pcie_init_irq_domain(9)Initialize IRQ domain✨
hv_pcifront_read_config(9)Read configuration space✨
hv_pcifront_write_config(9)Write configuration space✨
hv_read_config_block(9)Sends a read config block request to the back-end driver running in the Hyper-V parent partition.✨
hv_register_block_invalidate(9)Invoked when a config block invalidation arrives from the back-end driver.✨
hv_remove_ring_sysfs(9)remove ring sysfs entry corresponding to ring buffers for a channel.✨
hv_send_resources_allocated(9)Report local resource choices✨
hv_send_resources_released(9)Report local resources released✨
hv_write_config_block(9)Sends a write config block request to the back- end driver running in the Hyper-V parent partition.✨
hvc_get_chars(9)retrieve characters from firmware for denoted vterm adapter✨
hvc_iucv(9)Introduction to the z/VM IUCV hypervisor console (HVC) device driver✨
hvc_iucv_alloc(9)Allocates a new struct hvc_iucv_private instance✨
hvc_iucv_cleanup(9)Clean up and reset a z/VM IUCV HVC instance.✨
hvc_iucv_config(9)Parsing of hvc_iucv= kernel command line parameter✨
hvc_iucv_destroy(9)Destroy and free hvc_iucv_private instances✨
hvc_iucv_dtr_rts(9)HVC notifier for handling DTR/RTS✨
hvc_iucv_filter_connreq(9)Filter connection request based on z/VM user ID✨
hvc_iucv_get_chars(9)HVC get_chars operation.✨
hvc_iucv_get_private(9)Return a struct hvc_iucv_private instance.✨
hvc_iucv_hangup(9)Sever IUCV path and schedule hvc tty hang up✨
hvc_iucv_init(9)z/VM IUCV HVC device driver initialization✨
hvc_iucv_msg_complete(9)IUCV handler to process message completion✨
hvc_iucv_msg_pending(9)IUCV handler to process an incoming IUCV message.✨
hvc_iucv_notifier_add(9)HVC notifier for opening a TTY for the first time.✨
hvc_iucv_notifier_del(9)HVC notifier for closing a TTY for the last time.✨
hvc_iucv_notifier_hangup(9)HVC notifier for TTY hangups.✨
hvc_iucv_parse_filter(9)Parse filter for a single z/VM user ID✨
hvc_iucv_path_pending(9)IUCV handler to process a connection request.✨
hvc_iucv_path_severed(9)IUCV handler to process a path sever.✨
hvc_iucv_put_chars(9)HVC put_chars operation.✨
hvc_iucv_queue(9)Buffer terminal data for sending.✨
hvc_iucv_send(9)Send an IUCV message containing terminal data.✨
hvc_iucv_setup_filter(9)Set up z/VM user ID filter✨
hvc_iucv_sndbuf_work(9)Send buffered data over IUCV✨
hvc_iucv_write(9)Receive IUCV message & write data to HVC buffer.✨
hvc_put_chars(9)send characters to firmware for denoted vterm adapter✨
hvc_set_winsz(9)Resize the hvc tty terminal window.✨
hvcs_free_connection(9)free the connection between a vty-server and vty✨
hvcs_free_partner_info(9)free pi allocated by hvcs_get_partner_info✨
hvcs_get_partner_info(9)Get all of the partner info for a vty-server adapter✨
hvcs_register_connection(9)establish a connection between this vty- server and a vty.✨
hvterm_raw_put_chars(9)send characters to firmware for given vterm adapter✨
HW queue control(9)✨
HW timestamping(9)✨
hw_add_wol_arp(9)add ARP pattern✨
hw_add_wol_bcast(9)add broadcast pattern✨
hw_add_wol_mcast(9)add multicast pattern✨
hw_add_wol_ucast(9)add unicast pattern✨
hw_alloc_pkt(9)allocate enough descriptors for transmission✨
hw_block_intr(9)block hardware interrupts✨
hw_breakpoint_is_used(9)check if breakpoints are currently used✨
hw_breakpoint_slot_setup(9)Find and setup a perf slot according to operations✨
hw_cfg_broad_storm(9)configure broadcast storm✨
hw_cfg_wol(9)configure Wake-on-LAN features✨
hw_cfg_wol_pme(9)enable or disable Wake-on-LAN✨
hw_chk_wol_pme_status(9)check PMEN pin✨
hw_clr_multicast(9)clear multicast addresses✨
hw_clr_wol_pme_status(9)clear PMEN pin✨
hw_controller_reset(9)do controller reset✨
hw_desc_init(9)Init a HW descriptor struct✨
hw_device_reset(9)resets chip (execute without interruption)✨
hw_device_state(9)enables/disables interrupts (execute without interruption)✨
hw_disable(9)disable hardware✨
hw_enable(9)enable hardware✨
hw_enable_wol(9)enable Wake-on-LAN✨
hw_ep_bit(9)calculates the bit number✨
hw_ep_disable(9)disables endpoint (execute without interruption)✨
hw_ep_enable(9)enables endpoint (execute without interruption)✨
hw_ep_flush(9)flush endpoint fifo (execute without interruption)✨
hw_ep_get_halt(9)return endpoint halt status✨
hw_ep_prime(9)primes endpoint (execute without interruption)✨
hw_ep_set_halt(9)configures ep halt & resets data toggle after clear (execute without interruption)✨
hw_event_phy_down(9)we should notify the libsas the phy is down.✨
hw_event_sas_phy_up(9)FW tells me a SAS phy up event.✨
hw_event_sata_phy_up(9)FW tells me a SATA phy up event.✨
hw_failure_emergency_action_func(9)emergency action work after a known delay✨
hw_failure_emergency_schedule(9)Schedule an emergency system shutdown or reboot✨
hw_i2c (int)(9)✨
hw_init(9)check driver is correct for the hardware✨
hw_port_is_high_speed(9)test if port is high speed✨
hw_port_test_get(9)reads port test mode value✨
hw_port_test_set(9)writes port test mode (execute without interruption)✨
hw_protection_trigger(9)Trigger default emergency system hardware protection action✨
hw_r_phy(9)read data from PHY register✨
hw_read(9)reads from a hw register✨
hw_read_addr(9)read MAC address✨
hw_read_id_reg(9)reads from a identification register✨
hw_read_intr_enable(9)returns interrupt enable register✨
hw_read_intr_status(9)returns interrupt status register✨
hw_read_otgsc(9)returns otgsc register bits value.✨
hw_reset(9)reset the hardware✨
hw_send_pkt(9)mark packet for transmission✨
hw_set_addr(9)set MAC address✨
hw_set_desc_base(9)set descriptor base addresses✨
hw_set_grp_addr(9)set multicast addresses✨
hw_set_multicast(9)enable or disable all multicast receiving✨
hw_set_promiscuous(9)enable or disable promiscuous receiving✨
hw_set_wol_frame(9)program Wake-on-LAN pattern✨
hw_setup(9)setup the hardware✨
hw_setup_intr(9)setup interrupt mask✨
hw_start_rx(9)start receiving✨
hw_start_tx(9)start transmitting✨
hw_stop_rx(9)stop receiving✨
hw_stop_tx(9)stop transmitting✨
hw_test_and_clear(9)tests & clears a hw register✨
hw_test_and_clear_complete(9)test & clear complete status (execute without interruption)✨
hw_test_and_clear_intr_active(9)test & clear active interrupts (execute without interruption)✨
hw_test_and_clear_setup_guard(9)test & clear setup guard (execute without interruption)✨
hw_test_and_set_setup_guard(9)test & set setup guard (execute without interruption)✨
hw_test_and_write(9)tests & writes a hw register✨
hw_turn_on_intr(9)turn on specified interrupts✨
hw_usb_reset(9)restart device after a bus reset (execute without interruption)✨
hw_usb_set_address(9)configures USB address (execute without interruption)✨
hw_w_phy(9)write data to PHY register✨
hw_wait_vbus_lower_bsv(9)When we switch to device mode, the vbus value should be lower than OTGSC_BSV before connecting to host.✨
hw_write(9)writes to a hw register✨
hw_write_id_reg(9)writes to a identification register✨
hw_write_otgsc(9)updates target bits of OTGSC register.✨
hwi_write_buffer(9)Populate the WRB with task info✨
hwicap_command_desync(9)Send a DESYNC command to the ICAP port.✨
hwicap_get_configuration_register(9)Query a configuration register.✨
hwicap_type_1_read(9)Generates a Type 1 read packet header.✨
hwicap_type_1_write(9)Generates a Type 1 write packet header✨
hwif_ready(9)test if the HW is ready for use✨
hwlat_mode_write(9)Write function for "mode" entry✨
hwme_get_request_sync(9)HWME_GET_request/confirm according to API Spec✨
hwme_set_request_sync(9)HWME_SET_request/confirm according to API Spec✨
hwmon(9)✨
hwmon_device_register(9)register w/ hwmon✨
hwmon_device_register_for_thermal(9)register hwmon device for thermal subsystem✨
hwmon_device_register_with_groups(9)register w/ hwmon✨
hwmon_device_register_with_info(9)register w/ hwmon✨
hwmon_device_unregister(9)removes the previously registered class device✨
hwmon_is_bad_char(9)Is the char invalid in a hwmon name✨
hwmon_pmu__new(9)Allocate and construct a hwmon PMU.✨
hwmon_sanitize_name(9)Replaces invalid characters in a hwmon name✨
hwmp_route_info_get(9)Update routing info to originator and transmitter✨
hwpath_to_device(9)Finds the generic device corresponding to a given hardware path.✨
hwrm_req_alloc_flags(9)Sets GFP allocation flags for slices.✨
hwrm_req_dma_slice(9)Allocate a slice of DMA mapped memory.✨
hwrm_req_drop(9)Release all resources associated with the request.✨
hwrm_req_flags(9)Set non internal flags of the ctx✨
hwrm_req_hold(9)Claim ownership of the request's resources.✨
hwrm_req_replace(9)Replace request data.✨
hwrm_req_send(9)Execute an HWRM command.✨
hwrm_req_send_silent(9)A silent version of hwrm_req_send().✨
hwrm_req_timeout(9)Set the completion timeout for the request.✨
hws_gws_support(bool)(9)✨
hws_max_conc_proc (int)(9)✨
hwsp_seqno(9)the current breadcrumb value in the HW status page✨
hwspin_lock_bust(9)bust a specific hwspinlock✨
hwspin_lock_free(9)free a specific hwspinlock✨
hwspin_lock_register(9)register a new hw spinlock device✨
hwspin_lock_request_specific(9)request for a specific hwspinlock✨
hwspin_lock_timeout(9)lock an hwspinlock with timeout limit✨
hwspin_lock_timeout_in_atomic(9)lock an hwspinlock with timeout limit✨
hwspin_lock_timeout_irq(9)lock hwspinlock, with timeout, disable irqs✨
hwspin_lock_timeout_irqsave(9)lock hwspinlock, with timeout, disable irqs✨
hwspin_lock_timeout_raw(9)lock an hwspinlock with timeout limit✨
hwspin_lock_unregister(9)unregister an hw spinlock device✨
hwspin_trylock(9)attempt to lock a specific hwspinlock✨
hwspin_trylock_in_atomic(9)attempt to lock a specific hwspinlock✨
hwspin_trylock_irq(9)try to lock an hwspinlock, disable interrupts✨
hwspin_trylock_irqsave(9)try to lock an hwspinlock, disable interrupts✨
hwspin_trylock_raw(9)attempt to lock a specific hwspinlock✨
hwspin_unlock(9)unlock hwspinlock✨
hwspin_unlock_in_atomic(9)unlock hwspinlock✨