section 9 · Kernel routines 🧠
87928 pages · page 227 of 440
M (continued)
- mnt_allow_writers(9)check whether the attribute change allows writers✨
- mnt_drop_write(9)give up write access to a mount✨
- mnt_get_write_access(9)get write access to a mount without freeze protection✨
- mnt_get_write_access_file(9)get write access to a file's mount✨
- mnt_hold_writers(9)prevent write access to the given mount✨
- mnt_idmap_get(9)get a reference to an idmapping✨
- mnt_idmap_put(9)put a reference to an idmapping✨
- mnt_put_write_access(9)give up write access to a mount✨
- mnt_set_expiry(9)Put a mount on an expiration list✨
- mnt_unhold_writers(9)stop preventing write access to the given mount✨
- mnt_want_write(9)get write access to a mount✨
- mnt_want_write_file(9)get write access to a file's mount✨
- mock_drm_getfile(9)Create a new struct file for the drm device✨
- mod_build_hf_vsif_infopacket(9)Prepare HDMI Vendor Specific info frame. Follows HDMI Spec to build up Vendor Specific info frame✨
- mod_cc(9)Modular Congestion Control✨
- mod_cc(9freebsd)Modular Congestion Control✨
- mod_check_sig(9)check that the given signature is sane✨
- mod_delayed_work(9)modify delay of or queue a delayed work✨
- mod_delayed_work_on(9)modify delay of or queue a delayed work on specific CPU✨
- mod_lruvec_state(9)update lruvec memory statistics✨
- mod_memcg_state(9)update cgroup memory statistics✨
- mod_power_calc_psr_configs(9)calculate/update generic psr configuration fields.✨
- mod_timer(9)Modify a timer's timeout✨
- mod_timer_pending(9)Modify a pending timer's timeout✨
- mode_selection_work_fn(9)Alternate mode activation task✨
- mode_strip_sgid(9)handle the sgid bit for non-directories✨
- mode_strip_umask(9)handle vfs umask stripping✨
- modecpy(9)Prepare response for MODE SENSE✨
- modepin_gpio_dir_in(9)Set the direction of the specified GPIO pin as input✨
- modepin_gpio_dir_out(9)Set the direction of the specified GPIO pin as output✨
- modepin_gpio_get_value(9)Get the state of the specified pin of GPIO device✨
- modepin_gpio_probe(9)Initialization method for modepin_gpio✨
- modepin_gpio_set_value(9)Modify the state of the pin with specified value✨
- modeset (int)(9)✨
- modify_device_id(9)Modifies the device ID of the Boot BIOS image✨
- modify_for_partial_write(9)Do the modify-write part of a read-modify- write cycle.✨
- modify_ftrace_direct(9)Modify an existing direct 'multi' call to call something else✨
- modify_ftrace_direct_nolock(9)Modify an existing direct 'multi' call to call something else✨
- modify_prot_commit_ptes(9)Commit an update to a batch of ptes, leaving any hardware-controlled bits in the PTE unmodified.✨
- modify_prot_start_ptes(9)Start a pte protection read-modify-write transaction over a batch of ptes, which protects against asynchronous hardware modifications to the ptes. The intention is not to prevent the hardware from…✨
- modify_user_hw_breakpoint(9)modify a user-space hardware breakpoint✨
- module(9)structure describing a kernel module✨
- module(9freebsd)structure describing a kernel module✨
- module debugging statistics overview(9)✨
- module statistics debugfs counters(9)✨
- module_alias_printf(9)add auto-generated MODULE_ALIAS()✨
- module_apr_driver(9)Helper macro for registering a aprbus driver✨
- module_auxiliary_driver(9)Helper macro for registering an auxiliary driver✨
- module_comedi_driver(9)Helper macro for registering a comedi driver✨
- module_comedi_pci_driver(9)Helper macro for registering a comedi PCI driver✨
- module_comedi_pcmcia_driver(9)Helper macro for registering a comedi PCMCIA driver✨
- module_comedi_usb_driver(9)Helper macro for registering a comedi USB driver✨
- MODULE_DEPEND(9)set kernel module dependencies✨
- MODULE_DEPEND(9freebsd)set kernel module dependencies✨
- module_dm(9)Helper macro for DM targets that don't do anything special in their module_init and module_exit. Each module may only use this macro once, and calling it replaces module_init() and module_exit().✨
- module_driver(9)Helper macro for drivers that don't do anything special in module init/exit. This eliminates a lot of boilerplate. Each module may only use this macro once, and calling it replaces module_init()…✨
- module_dsa_tag_driver(9)Helper macro for registering a single DSA tag driver✨
- module_dsa_tag_drivers(9)Helper macro for registering DSA tag drivers✨
- module_dwarf_cleanup(9)remove FDE/CIEs associated with @mod✨
- module_exit(9)driver exit entry point✨
- module_ffa_driver(9)Helper macro for registering a psa_ffa driver✨
- module_gameport_driver(9)Helper macro for registering a gameport driver✨
- module_gbphy_driver(9)Helper macro for registering a gbphy driver✨
- module_greybus_driver(9)Helper macro for registering a Greybus driver✨
- module_hid_driver(9)Helper macro for registering a HID driver✨
- module_i2c_driver(9)Helper macro for registering a modular I2C driver✨
- module_i3c_driver(9)Register a module providing an I3C driver✨
- module_i3c_i2c_driver(9)Register a module providing an I3C and an I2C driver✨
- module_init(9)driver initialization entry point✨
- module_isa_driver(9)Helper macro for registering a ISA driver✨
- module_isa_driver_with_irq(9)Helper macro for registering an ISA driver with irq✨
- module_mei_cl_driver(9)Helper macro for registering mei cl driver✨
- module_mtd_blktrans(9)Helper macro for registering a mtd blktrans driver✨
- module_param(9)typesafe helper for a module/cmdline parameter✨
- module_param_array(9)a parameter which is an array of some type✨
- module_param_array_named(9)renamed parameter which is an array of some type✨
- module_param_cb(9)general callback for a module/cmdline parameter✨
- module_param_hw_array(9)A parameter representing an array of hw parameters✨
- module_param_hw_named(9)A parameter representing a hw parameters✨
- module_param_named(9)typesafe helper for a renamed module/cmdline parameter✨
- module_param_named_unsafe(9)same as module_param_named but taints kernel✨
- module_param_string(9)a char array parameter✨
- module_param_unsafe(9)same as module_param but taints kernel✨
- module_parport_driver(9)Helper macro for registering a modular parport driver✨
- module_pata_parport_driver(9)Helper macro for registering a pata_parport driver✨
- module_pci_driver(9)Helper macro for registering a PCI driver✨
- module_pcmcia_driver(9)Helper macro for registering a pcmcia driver✨
- module_peci_driver(9)helper macro for registering a modular PECI driver✨
- module_pnp_driver(9)Helper macro for registering a PnP driver✨
- MODULE_PNP_INFO(9)register plug and play information for device matching✨
- MODULE_PNP_INFO(9freebsd)register plug and play information for device matching✨
- module_put(9)release a reference count to a module✨
- module_refcount(9)return the refcount or -1 if unloading✨
- module_rpmsg_driver(9)Helper macro for registering an rpmsg driver✨
- module_scmi_driver(9)Helper macro for registering a scmi driver✨
- module_scmi_protocol(9)Helper macro for registering a scmi protocol✨
- module_sdio_driver(9)Helper macro for registering a SDIO driver✨
- module_sdw_driver(9)Helper macro for registering a Soundwire driver✨
- module_serio_driver(9)Helper macro for registering a serio driver✨
- module_slim_driver(9)Helper macro for registering a SLIMbus driver✨
- module_spi_driver(9)Helper macro for registering a SPI driver✨
- module_ssam_device_driver(9)Helper macro for SSAM device driver registration.✨
- module_usb_composite_driver(9)Helper macro for registering a USB gadget composite driver✨
- module_usb_driver(9)Helper macro for registering a USB driver✨
- module_vchiq_driver(9)Helper macro for registering a vchiq driver✨
- MODULE_VERSION(9)set kernel module version✨
- MODULE_VERSION(9freebsd)set kernel module version✨
- module_w1_family(9)Helper macro for registering a 1-Wire families✨
- module_wmi_driver(9)Helper macro to register/unregister a WMI driver✨
- mon_event_config_index_get(9)get the hardware index for the configurable event✨
- mon_get_kn_priv(9)Get the mon_data priv data for this event.✨
- mon_put_kn_priv(9)Free all allocated mon_data structures.✨
- mongrp_reparent(9)replace parent CTRL_MON group of a MON group✨
- mono_src_copy_imm_blit(9)color expand from system memory to framebuffer✨
- most_deregister_component(9)deregisters a driver component with the core✨
- most_deregister_interface(9)Deregisters instance of the interface.✨
- most_free_mbo_coherent(9)free an MBO and its coherent buffer✨
- most_get_mbo(9)get pointer to an MBO of pool✨
- most_put_mbo(9)return buffer to pool✨
- most_read_completion(9)read completion handler✨
- most_register_component(9)registers a driver component with the core✨
- most_register_interface(9)Registers instance of the interface.✨
- most_resume_enqueue(9)allow core to enqueue MBOs again✨
- most_start_channel(9)prepares a channel for communication✨
- most_stop_channel(9)stops a running channel✨
- most_stop_enqueue(9)prevents core from enqueing MBOs✨
- most_submit_mbo(9)submits an MBO to fifo✨
- most_write_completion(9)write completion handler✨
- motion(9)accepts NML motion commands, interacts with HAL in realtime✨
- mount_arg(9)functions provided as part of the kernel mount interface✨
- mount_arg(9freebsd)functions provided as part of the kernel mount interface✨
- mount_argb(9)functions provided as part of the kernel mount interface✨
- mount_argb(9freebsd)functions provided as part of the kernel mount interface✨
- mount_argf(9)functions provided as part of the kernel mount interface✨
- mount_argf(9freebsd)functions provided as part of the kernel mount interface✨
- mount_argsu(9)functions provided as part of the kernel mount interface✨
- mount_argsu(9freebsd)functions provided as part of the kernel mount interface✨
- mount_ubifs(9)mount UBIFS file-system.✨
- move_addr_to_kernel(9)copy a socket address into kernel space✨
- move_addr_to_user(9)copy an address to user space✨
- move_device_tree(9)move tree to an unused area, if needed.✨
- move_empty_bucket(9)Move an empty bucket closer to the start of the bucket array.✨
- move_linked_works(9)move linked works to a list✨
- move_node(9)move a node.✨
- move_nodes(9)move nodes.✨
- move_pages(9)move arbitrary anonymous pages of an existing vma✨
- move_remote_task_to_local_dsq(9)Move a task from a foreign rq to a local DSQ✨
- move_task_between_dsqs(9)Move a task from one DSQ to another✨
- move_up_lpt_heap(9)move a new heap entry up as far as possible.✨
- moveoff(9)Component for HAL-only offsets✨
- moverate (int)(9)✨
- movf_func(9)Emulate a MOVF instruction✨
- movn_func(9)Emulate a MOVZ instruction✨
- movt_func(9)Emulate a MOVT instruction✨
- movz_func(9)Emulate a MOVZ instruction✨
- mp_register_ioapic(9)Register an IOAPIC device✨
- mpage_readahead(9)start reads against pages✨
- mpam_register_requestor(9)Register a requestor with the MPAM driver✨
- mpam_resctrl_offline_domain_hdr(9)Update the domain header to remove a CPU.✨
- MPASS(9)kernel expression verification macros✨
- mpc512x_cs_config(9)Setup chip select configuration✨
- mpc5200_psc_ac97_gpio_reset(9)Use gpio pins to reset the ac97 bus✨
- mpc52xx_declare_of_platform_devices(9)register internal devices and children of the localplus bus to the of_platform bus.✨
- mpc52xx_fec_hw_init(9)✨
- mpc52xx_fec_start(9)✨
- mpc52xx_fec_stop(9)✨
- mpc52xx_get_irq(9)Get pending interrupt number hook function✨
- mpc52xx_gpt_from_irq(9)Return the GPT device associated with an IRQ number✨
- mpc52xx_gpt_start_timer(9)Set and enable the GPT timer✨
- mpc52xx_gpt_stop_timer(9)Stop a gpt✨
- mpc52xx_gpt_timer_period(9)Read the timer period✨
- mpc52xx_init_irq(9)Initialize and register with the virq subsystem✨
- mpc52xx_irqhost_map(9)Hook to map from virq to an irq_chip structure✨
- mpc52xx_irqhost_xlate(9)translate virq# from device tree interrupts property✨
- mpc52xx_is_extirq(9)Returns true if hwirq number is for an external IRQ✨
- mpc52xx_map_common_devices(9)iomap devices required by common code✨
- mpc52xx_restart(9)ppc_md->restart hook for mpc5200 using the watchdog timer✨
- mpc52xx_set_psc_clkdiv(9)Set clock divider in the CDM for PSC ports✨
- mpc52xx_spi_fsm_process(9)Finite State Machine iteration function✨
- mpc52xx_spi_irq(9)IRQ handler✨
- mpc52xx_spi_wq(9)Workqueue function for polling the state machine✨
- mpc5xxx_fwnode_get_bus_frequency(9)Find the bus frequency for a firmware node✨
- mpi3mr_add_event_wait_for_device_refresh(9)Add Wait for Device Refresh Event✨
- mpi3mr_add_expander_phy(9)report expander phy to transport✨
- mpi3mr_add_host_phy(9)report sas_host phy to SAS transport✨
- mpi3mr_add_phy_to_an_existing_port(9)add phy to existing port✨
- mpi3mr_add_sas_phy(9)Adding a single phy to a port✨
- mpi3mr_admin_request_post(9)Post request to admin queue✨
- mpi3mr_alloc_chain_bufs(9)Allocate chain buffers✨
- mpi3mr_alloc_diag_bufs(9)Allocate memory for diag buffers✨
- mpi3mr_alloc_fwevt(9)Allocate firmware event✨
- mpi3mr_alloc_hba_port(9)alloc hba port object✨
- mpi3mr_alloc_ioctl_dma_memory(9)Alloc memory for ioctl dma✨
- mpi3mr_alloc_op_reply_q_segments(9)Alloc segmented reply pool✨
- mpi3mr_alloc_op_req_q_segments(9)Alloc segmented req pool.✨
- mpi3mr_alloc_reply_sense_bufs(9)Send IOC Init✨
- mpi3mr_alloc_tgtdev(9)target device allocator✨
- mpi3mr_alloc_trace_buffer(9)Allocate segmented trace buffer✨
- mpi3mr_allow_scmd_to_fw(9)Command is allowed during shutdown✨
- mpi3mr_app_save_logdata_th(9)Save Log Data events✨
💅
getting it ready, bestie…