section 9 · Kernel routines 🧠

87928 pages · page 175 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

I (continued)

iio_simple_dummy_read_event_config(9)is event enabled?✨
iio_simple_dummy_read_event_value(9)get value associated with event✨
iio_simple_dummy_trigger_h(9)the trigger handler function✨
iio_simple_dummy_unconfigure_buffer(9)release buffer resources✨
iio_simple_dummy_write_event_config(9)set whether event is enabled✨
iio_simple_dummy_write_event_value(9)set value associate with event✨
iio_str_to_fixpoint(9)Parse a fixed-point number from a string✨
iio_str_to_nano(9)Parse a fixed-point string to get an IIO_VAL_INT_PLUS_NANO value✨
iio_test_relative_error_ppm(9)Compute relative error (in parts-per- million) between two fixed-point strings✨
iio_trigger_get_drvdata(9)Get trigger driver data✨
iio_trigger_poll(9)Call the IRQ trigger handler of the consumers✨
iio_trigger_poll_nested(9)Call the threaded trigger handler of the consumers✨
iio_trigger_register(9)register a trigger with the IIO core✨
iio_trigger_set_drvdata(9)Set trigger driver data✨
iio_trigger_set_immutable(9)set an immutable trigger on destination✨
iio_trigger_unregister(9)unregister a trigger from the core✨
iio_trigger_using_own(9)tells us if we use our own HW trigger ourselves✨
iio_trigger_validate_own_device(9)Check if a trigger and IIO device belong to the same device✨
iio_triggered_buffer_cleanup(9)Free resources allocated by iio_triggered_buffer_setup_ext()✨
iio_triggered_buffer_setup_ext(9)Setup triggered buffer and pollfunc✨
iio_triggered_event_cleanup(9)Free resources allocated by iio_triggered_event_setup()✨
iio_triggered_event_setup(9)Setup pollfunc_event for triggered event✨
IIO_UNMOD_EVENT_CODE(9)create event identifier for unmodified (non differential) channels✨
iio_update_buffers(9)add or remove buffer from active list✨
iio_validate_own_trigger(9)Check if a trigger and IIO device belong to the same device✨
iio_validate_scan_mask_onehot(9)Validates that exactly one channel is selected✨
iio_write_channel_attribute(9)Write values to the device attribute.✨
iio_write_channel_ext_info(9)write ext_info attribute from a given channel✨
iio_write_channel_raw(9)write to a given channel✨
iioutils_break_up_name(9)extract generic name from full channel name✨
iioutils_get_param_float(9)read a float value from a channel parameter✨
iioutils_get_type(9)find and process _type attribute data✨
ikm_destroy_trace_instance(9)destroy a previously created instance✨
ikm_list_monitors(9)list all available monitors✨
ikm_run_monitor(9)apply configs and run the monitor✨
il3945_get_antenna_flags(9)Get antenna flags for RXON command✨
il3945_hw_find_station(9)Find station id for a given BSSID✨
il3945_rate_scale_init(9)Initialize the rate scale table based on assoc info✨
il4965_tx_queue_set_status(9)(optionally) start Tx/Cmd queue✨
il_beacon_time_mask_high(9)mask of higher 32 bit of beacon time @il -- pointer to il_priv data structure @tsf_bits -- number of bits need to shift for masking)✨
il_beacon_time_mask_low(9)mask of lower 32 bit of beacon time @il -- pointer to il_priv data structure @tsf_bits -- number of bits need to shift for masking)✨
il_clear_driver_stations(9)clear knowledge of all stations from driver✨
il_queue_dec_wrap(9)decrement queue idx, wrap back to end @idx -- current idx @n_bd -- total number of entries in queue (must be power of 2)✨
il_queue_inc_wrap(9)increment queue idx, wrap back to beginning @idx -- current idx @n_bd -- total number of entries in queue (must be power of 2)✨
il_sta_id_or_broadcast(9)return sta_id or broadcast sta✨
ili922x_display_init(9)initialize the display by setting the configuration registers✨
ili922x_poweroff(9)turn the display off✨
ili922x_poweron(9)turn the display on✨
ili922x_read(9)read register from display✨
ili922x_read_status(9)read status register from display✨
ili922x_reg_dump(9)dump all registers✨
ili922x_write(9)write a controller register✨
ilk_update_display_irq(9)update DEIMR✨
ilog2(9)log of base 2 of 32-bit or a 64-bit unsigned value @n - parameter✨
ilookup(9)search for an inode in the inode cache✨
ilookup5(9)search for an inode in the inode cache✨
ilookup5_nowait(9)search for an inode in the inode cache✨
ilowpass(9)Low-pass filter with integer inputs and outputs✨
ilsel_disable(9)Disable an ILSEL set✨
ilsel_enable(9)Enable an ILSEL set.✨
ilsel_enable_fixed(9)Enable an ILSEL set at a fixed interrupt level✨
ima_bprm_check(9)based on policy, collect/store measurement.✨
ima_bprm_creds_for_exec(9)collect/store/appraise measurement.✨
ima_collect_modsig(9)Calculate the file hash without the appended signature.✨
ima_creds_check(9)based on policy, collect/store measurement.✨
ima_delete_rules(9)called to cleanup invalid in-flight policy.✨
ima_file_check(9)based on policy, collect/store measurement.✨
ima_file_free(9)called on __fput()✨
ima_file_hash(9)return a measurement of the file✨
ima_file_mmap(9)based on policy, collect/store measurement.✨
ima_file_mprotect(9)based on policy, limit mprotect change✨
ima_free_kexec_buffer(9)free memory used by the IMA buffer✨
ima_get_action(9)appraise & measure decision based on policy.✨
ima_get_kexec_buffer(9)get IMA buffer from the previous kernel✨
ima_iint_find(9)Return the iint associated with an inode✨
ima_init_policy(9)initialize the default measure rules.✨
ima_inode_free_rcu(9)Called to free an inode via a RCU callback✨
ima_inode_get(9)Find or allocate an iint associated with an inode✨
ima_inode_hash(9)return the stored measurement if the inode has been hashed and is in the iint cache.✨
ima_inode_post_setattr(9)reflect file metadata changes✨
ima_kernel_module_request(9)Prevent crypto-pkcs1(rsa,*) requests✨
ima_kexec_cmdline(9)measure kexec cmdline boot args✨
ima_load_data(9)appraise decision based on policy✨
ima_match_policy(9)decision based on LSM and other conditions✨
ima_match_rule_data(9)determine whether func_data matches the policy rule✨
ima_match_rules(9)determine whether an inode matches the policy rule.✨
ima_measure_critical_data(9)measure kernel integrity critical data✨
ima_measure_loaded_policy(9)measure the active IMA policy ruleset✨
ima_measure_raw_policy(9)Measure the raw policy write buffer✨
ima_parse_add_rule(9)add a rule to ima_policy_rules✨
ima_parse_buf(9)Parses lengths and data from an input buffer✨
ima_post_create_tmpfile(9)mark newly created tmpfile as new✨
ima_post_key_create_or_update(9)measure asymmetric keys✨
ima_post_load_data(9)appraise decision based on policy✨
ima_post_path_mknod(9)mark as a new inode✨
ima_post_read_file(9)in memory collect/appraise/audit measurement✨
ima_queue_delete(9)Delete measurements✨
ima_queue_delete_partial(9)Delete current measurements✨
ima_queue_stage(9)Stage all measurements✨
ima_queue_staged_delete_all(9)Delete staged measurements✨
ima_read_file(9)pre-measure/appraise hook decision based on policy✨
ima_template_has_modsig(9)Check whether template has modsig-related fields.✨
ima_update_policy(9)update default_rules with new measure rules✨
ima_update_policy_flags(9)Update global IMA variables✨
Image load info flags(9)✨
imax(9)compare integers✨
imem_get_device_sleep_state(9)Get the device sleep state value.✨
img_ascii_lcd_probe(9)probe an LCD display device✨
img_ascii_lcd_remove(9)remove an LCD display device✨
img_ir_allowed_protos(9)Get allowed protocols from global decoder list.✨
img_ir_control(9)Convert control struct to control register value.✨
img_ir_decoder_compatible(9)Find whether a decoder will work with a device.✨
img_ir_decoder_convert(9)Generate internal timings in decoder.✨
img_ir_decoder_preprocess(9)Preprocess timings in decoder.✨
img_ir_disable_wake(9)Switch out of wake mode.✨
img_ir_enable_wake(9)Switch to wake mode.✨
img_ir_free_timing(9)Convert free time timing struct to register value.✨
img_ir_free_timing_dynamic(9)Update free time register value.✨
img_ir_probe_hw_caps(9)Probe capabilities of the hardware.✨
img_ir_set_decoder(9)Set the current decoder.✨
img_ir_symbol_timing(9)Convert symbol timing struct to register value.✨
img_ir_timing_range_convert(9)Convert microsecond range.✨
img_ir_timings_convert(9)Convert timings to register values✨
img_ir_write_timings(9)Write timings to the hardware now✨
imgu_css_pool_last(9)Retrieve the nth pool entry from last✨
imgu_dmamap_alloc(9)allocate and map a buffer into KVA✨
imgu_mmu_alloc_page_table(9)allocate a pre-filled page table✨
imgu_mmu_exit(9)clean up IPU3 MMU block✨
imgu_mmu_free_page_table(9)free page table✨
imgu_mmu_init(9)initialize IPU3 MMU block✨
imgu_mmu_map(9)map a buffer to a physical address✨
imgu_mmu_map_sg(9)Map a scatterlist✨
imgu_mmu_set_halt(9)set CIO gate halt bit✨
imgu_mmu_tlb_invalidate(9)invalidate translation look-aside buffer✨
imgu_mmu_unmap(9)Unmap a buffer✨
Implementation Status(9)✨
implementing nonblocking commit(9)✨
implicit fence polling(9)✨
import_iovec(9)Copy an array of &struct iovec from userspace into the kernel, check that it is valid, and initialize a new &struct iov_iter iterator to access it.✨
imr_add_range(9)add an Isolated Memory Region.✨
imr_address_overlap(9)detects an address overlap.✨
imr_check_params(9)check passed address range IMR alignment and non-zero size✨
imr_clear(9)delete an Isolated Memory Region by index✨
imr_dbgfs_state_show(9)print state of IMR registers.✨
imr_debugfs_register(9)register debugfs hooks.✨
imr_fixup_memmap(9)Tear down IMRs used during bootup.✨
imr_init(9)entry point for IMR driver.✨
imr_is_enabled(9)true if an IMR is enabled false otherwise.✨
imr_raw_size(9)account for the IMR_ALIGN bytes that addr_hi appends.✨
imr_read(9)read an IMR at a given index.✨
imr_remove_range(9)delete an Isolated Memory Region by address✨
imr_self_test(9)perform the IMR self-test✨
imr_self_test_init(9)entry point for IMR driver.✨
imr_self_test_result(9)Print result string for self test.✨
imr_write(9)write an IMR at a given index.✨
imx274_load_default(9)load default control values✨
imx274_read_mbreg(9)Read a multibyte register.✨
imx274_write_mbreg(9)Write a multibyte register.✨
imx334_detect(9)Detect imx334 sensor✨
imx334_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
imx334_init_controls(9)Initialize sensor subdevice controls✨
imx334_parse_hw_config(9)Parse HW configuration and check if supported✨
imx334_update_controls(9)Update control ranges based on streaming mode✨
imx334_update_exp_gain(9)Set updated exposure and gain✨
imx335_detect(9)Detect imx335 sensor✨
imx335_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
imx335_init_controls(9)Initialize sensor subdevice controls✨
imx335_parse_hw_config(9)Parse HW configuration and check if supported✨
imx335_power_on(9)Sensor power on sequence✨
imx335_update_controls(9)Update control ranges based on streaming mode✨
imx335_update_exp_gain(9)Set updated exposure and gain✨
imx412_detect(9)Detect imx412 sensor✨
imx412_disable_streams(9)Enable specified streams for the sensor✨
imx412_enable_streams(9)Enable specified streams for the sensor✨
imx412_fill_pad_format(9)Fill subdevice pad format from selected sensor mode✨
imx412_init_controls(9)Initialize sensor subdevice controls✨
imx412_parse_hw_config(9)Parse HW configuration and check if supported✨
imx412_update_controls(9)Update control ranges based on streaming mode✨
imx412_update_exp_gain(9)Set updated exposure and gain✨
imx8_dump(9)This function is called when a panic message is received from the firmware.✨
imx8_get_registers(9)This function is called in case of DSP oops in order to gather information about the registers, filename and linenumber and stack.✨
imx_dsp_attach_pm_domains(9)attach the power domains✨
imx_dsp_rproc_add_carveout(9)request mailbox channels✨
imx_dsp_rproc_detect_mode(9)detect DSP control mode✨
imx_dsp_rproc_handle_rsc(9)Handle DSP-specific resource table entries✨
imx_dsp_rproc_mbox_alloc(9)request mailbox channels✨
imx_dsp_rproc_rx_tx_callback(9)inbound mailbox message handler✨
imx_dsp_rproc_rxdb_callback(9)inbound mailbox message handler✨
imx_dsp_rproc_sys_to_da(9)internal memory translation helper✨
In-Field Scan(9)✨
in4_cksum(9)compute Internet checksum✨
in4_pton(9)convert an IPv4 address from literal to binary representation✨
in6_dev_get(9)get inet6_dev pointer from netdevice✨
in6_pcbgroup_byhash(9freebsd)Distributed Protocol Control Block Groups✨
in6_pton(9)convert an IPv6 address from literal to binary representation✨
in_circular_range(9)Helper function to check if a value is within the range of two numbers (circular range)✨
in_cyclic_range(9)Check whether the given value is between the lower and upper bounds, within a cyclic range of values from 0 to (modulus - 1).✨
in_epoch(9)kernel epoch based reclamation✨
in_epoch(9freebsd)kernel epoch based reclamation✨
in_flight_show(9)number of I/Os currently in flight - in most cases this will be either 0 or 1. It may be higher if someone has also issued other SCSI commands such as via an ioctl.✨