📦 sg3_utils-doc

86 pages

R

rescan-scsi-bus.sh(8)script to add and remove SCSI devices without rebooting✨

S

scsi_logging_level(8)access Linux SCSI logging level information✨
scsi_mandat(8)check SCSI device support for mandatory commands✨
scsi_readcap(8)do SCSI READ CAPACITY command on disks✨
scsi_ready(8)do SCSI TEST UNIT READY on devices✨
scsi_satl(8)check SCSI to ATA Translation (SAT) device support✨
scsi_start(8)start one or more SCSI disks✨
scsi_stop(8)stop (spin down) one or more SCSI disks✨
scsi_temperature(8)fetch the temperature of a SCSI device✨
sg3_utils(8)a package of utilities for sending SCSI commands✨
sg3_utils_json(8)JSON output for some sg3_utils utilities✨
sg_bg_ctl(8)send SCSI BACKGROUND CONTROL command✨
sg_compare_and_write(8)send the SCSI COMPARE AND WRITE command✨
sg_copy_results(8)send SCSI RECEIVE COPY RESULTS command (XCOPY related)✨
sg_dd(8)copy data to and from files and devices, especially SCSI devices✨
sg_decode_sense(8)decode SCSI sense and related data✨
sg_emc_trespass(8)change ownership of SCSI LUN from another Service-Processor to this one✨
sg_format(8)format, format with preset, resize SCSI disk; format tape✨
sg_get_config(8)send SCSI GET CONFIGURATION command (MMC-4 +)✨
sg_get_elem_status(8)send SCSI GET PHYSICAL ELEMENT STATUS command✨
sg_get_lba_status(8)send SCSI GET LBA STATUS(16 or 32) command✨
sg_ident(8)send SCSI REPORT/SET IDENTIFYING INFORMATION command✨
sg_inq(8)issue SCSI INQUIRY command and/or decode its response✨
sg_logs(8)access log pages with SCSI LOG SENSE command✨
sg_luns(8)send SCSI REPORT LUNS command or decode given LUN✨
sg_map(8)displays mapping between Linux sg and other SCSI devices✨
sg_map26(8)map SCSI generic (sg) device to corresponding device names✨
sg_modes(8)reads mode pages with SCSI MODE SENSE command✨
sg_opcodes(8)report supported SCSI commands or task management functions✨
sg_persist(8)use SCSI PERSISTENT RESERVE command to access registrations and reservations✨
sg_prevent(8)send SCSI PREVENT ALLOW MEDIUM REMOVAL command✨
sg_raw(8)send arbitrary SCSI or NVMe command to a device✨
sg_rbuf(8)reads data using SCSI READ BUFFER command✨
sg_rdac(8)display or modify SCSI RDAC Redundant Controller mode page✨
sg_read(8)read multiple blocks of data, optionally with SCSI READ commands✨
sg_read_attr(8)send SCSI READ ATTRIBUTE command✨
sg_read_block_limits(8)send SCSI READ BLOCK LIMITS command✨
sg_read_buffer(8)send SCSI READ BUFFER command✨
sg_read_long(8)send a SCSI READ LONG command✨
sg_readcap(8)send SCSI READ CAPACITY command✨
sg_reassign(8)send SCSI REASSIGN BLOCKS command✨
sg_referrals(8)send SCSI REPORT REFERRALS command✨
sg_rem_rest_elem(8)send SCSI remove or restore element command✨
sg_rep_density(8)send SCSI REPORT DENSITY SUPPORT command✨
sg_rep_pip(8)send SCSI REPORT PROVISIONING INITIALIZATION PATTERN command✨
sg_rep_zones(8)send SCSI REPORT ZONES, REALMS or ZONE DOMAINS command✨
sg_requests(8)send one or more SCSI REQUEST SENSE commands✨
sg_reset(8)sends SCSI device, target, bus or host reset; or checks reset state✨
sg_reset_wp(8)send SCSI RESET WRITE POINTER command✨
sg_rmsn(8)send SCSI READ MEDIA SERIAL NUMBER command✨
sg_rtpg(8)send SCSI REPORT TARGET PORT GROUPS command✨
sg_safte(8)access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device✨
sg_sanitize(8)remove all user data from disk with SCSI SANITIZE command✨
sg_sat_datetime(8)report or set date and time on a ATA device✨
sg_sat_identify(8)send ATA IDENTIFY DEVICE command via SCSI to ATA Translation (SAT) layer✨
sg_sat_phy_event(8)use ATA READ LOG EXT via a SAT pass-through to fetch SATA phy event counters✨
sg_sat_read_gplog(8)use ATA READ LOG EXT or SMART READ LOG command via a SCSI to ATA Translation (SAT) layer✨
sg_sat_set_features(8)use ATA SET FEATURES command via a SCSI to ATA Translation (SAT) layer✨
sg_scan(8)scans sg devices (or SCSI/ATAPI/ATA devices) and prints results✨
sg_seek(8)send SCSI SEEK, PRE-FETCH(10) or PRE-FETCH(16) command✨
sg_senddiag(8)performs a SCSI SEND DIAGNOSTIC command✨
sg_ses(8)access a SCSI Enclosure Services (SES) device✨
sg_ses_microcode(8)send microcode to a SCSI enclosure✨
sg_start(8)send SCSI START STOP UNIT command: start, stop, load or eject medium✨
sg_stpg(8)send SCSI SET TARGET PORT GROUPS command✨
sg_stream_ctl(8)send SCSI GET STREAM STATUS or STREAM CONTROL command✨
sg_sync(8)send SCSI SYNCHRONIZE CACHE command✨
sg_test_rwbuf(8)test a SCSI host adapter by issuing dummy writes and reads✨
sg_timestamp(8)report or set timestamp on SCSI device✨
sg_turs(8)send one or more SCSI TEST UNIT READY commands✨
sg_unmap(8)send SCSI UNMAP command (known as 'trim' in ATA specs)✨
sg_verify(8)invoke SCSI VERIFY command(s) on a block device✨
sg_vpd(8)fetch SCSI VPD page and/or decode its response✨
sg_wr_mode(8)write (modify) SCSI mode page✨
sg_write_attr(8)send SCSI WRITE ATTRIBUTE command✨
sg_write_buffer(8)send SCSI WRITE BUFFER commands✨
sg_write_long(8)send SCSI WRITE LONG command✨
sg_write_same(8)send SCSI WRITE SAME command✨
sg_write_verify(8)send the SCSI WRITE AND VERIFY command✨
sg_write_x(8)SCSI WRITE normal/ATOMIC/SAME/SCATTERED/STREAM, ORWRITE commands✨
sg_xcopy(8)copy data to and from files and devices using SCSI EXTENDED COPY (XCOPY)✨
sg_z_act_query(8)send a SCSI ZONE ACTIVATE or ZONE QUERY command✨
sg_zone(8)send a SCSI ZONE modifying command✨
sginfo(8)access mode page information for a SCSI (or ATAPI) device✨
sgm_dd(8)copy data to and from files and devices, especially SCSI devices✨
sgp_dd(8)copy data to and from files and devices, especially SCSI devices✨