📦 s390-tools

123 pages

A

af_iucv(7)Sockets for z/VM IUCV and HiperSockets communication✨

C

chccwdev(8)modify generic attributes of channel attached devices.✨
chchp(8)modify channel-path state.✨
chcpumf(8)manage the CPU-measurement facilities support✨
chiucvallow(8)List, change, and verify z/VM user ID filter settings✨
chpstat(8)Display channel-path statistics✨
chreipl(8)change the re-IPL configuration for Linux on System z✨
chshut(8)change the shutdown actions for Linux on System z✨
chzcrypt(8)modify zcrypt configuration✨
chzdev(8)Configure z Systems specific devices✨
cio_ignore(8)query or modify the CIO device driver blacklist✨
cmsfs-fuse(1)File system for z/VM CMS disks✨
cpacfinfo(1)tool to provide information about CPACF✨
cpacfstats(1)enable, disable and display CPACF statistical data✨
cpacfstatsd(8)CPACF statistics collection daemon process✨
cpuplugd(8)Linux on System z CPU and memory hotplug daemon✨
cpuplugd.conf(5)Configuration file for the Linux on System z CPU and memory hotplug daemon✨
cputype(8)Based on the IBM machine model, returns a (hopefully) human understandable string that identifies the processor.✨
ctc_configure(8)Configures or deconfigures a Channel-to-Channel adapter (CTC) or LAN Channel Station adapter (LCS)✨

D

dasd_configure(8)Configures or deconfigures a Direct Access Storage Device (DASD) volume.✨
dasdfmt(8)formatting of DASD (ECKD) disk drives.✨
dasdinfo(8)tool to read unique id from s390 DASD device✨
dasdstat(8)read or modify the statistics of the DASD device driver.✨
dasdview(8)Display DASD and VTOC information and dump the content of a DASD to the console.✨
dbginfo.sh(8)collect runtime, configuration and trace information for debugging Linux on IBM Z✨
dump2tar(1)Gather file contents and command output into a tar archive✨
dumpconf(8)Configure panic and PSW restart actions for Linux on System z✨

F

fdasd(8)partitioning tool.✨

G

genprotimg(1)Create an IBM Secure Execution image✨

H

hsavmcore(8)Enable kdump to release the HSA memory early in the dump process✨
hsavmcore.conf(5)Configuration file for the hsavmcore tool✨
hsci(8)control and show HSCI settings.✨
hvc_iucv(9)Introduction to the z/VM IUCV hypervisor console (HVC) device driver✨
hyptop(8)Show hypervisor performance data on System z✨

I

iucv_configure(8)Configures or deconfigures a z/VM Inter-User Communications Vehicle (IUCV) network adapter✨
iucvconn(1)start terminal connection over z/VM IUCV✨
iucvtty(1)allow remote logins over z/VM IUCV✨

L

lschp(8)list information about available channel-paths.✨
lscpumf(8)display information about CPU-measurement facilities✨
lscss(8)list channel subsystem devices.✨
lsdasd(8)list channel attached direct access storage devices (DASD).✨
lshwc(8)extract CPU Measurement Facilities counter sets✨
lsiucvallow(8)List, change, and verify z/VM user ID filter settings✨
lsluns(8)list LUNs discovered in the FC SAN through zfcp, or show encryption state of zfcp-attached LUNs✨
lspai(8)list Processor Activity Instrumentation (PAI) counters and values✨
lsqeth(8)list all qeth-based network devices with their corresponding settings.✨
lsreipl(8)list the re-IPL configuration for Linux on System z✨
lsscm(8)list information about available Storage Class Memory Increments.✨
lsshut(8)print the shutdown action configuration for Linux on System z✨
lsstp(8)Show STP configuration information✨
lstape(8)list tape devices.✨
lszcrypt(8)display zcrypt device and configuration information✨
lszdev(8)Display configuration of z Systems specific devices✨
lszfcp(8)list information about zfcp adapters, ports, and units✨

M

mk-s390image(1)tool for creating bootable image✨
mkdump(8)Preparing disks for use as S/390 dump device.✨
mon_fsstatd(8)Filesystem statistics monitor.✨
mon_procd(8)Process data monitor.✨

O

opticsmon(8)Monitor health of directly attached PCI devices including NVMes and NICs.✨

P

pai(8)record and report Processor Activity Instrumentation (PAI) counters✨
prandom(4)kernel pseudo random number generator device for s390✨
pvapconfig(1)automatic configure APQNs within an SE KVM guest.✨
pvattest(1)create, perform, and verify attestation measurements✨
pvattest-check(1)Check if the attestation result matches defined policies✨
pvattest-create(1)Create an attestation measurement request✨
pvattest-perform(1)Send the attestation request to the Ultravisor (s390x only.)✨
pvattest-verify(1)Verify an attestation response✨
pvebc(1)Protected Virtualization Early Boot Customization Tool✨
pvics(8)Convert qcow2 KVM guest images to EBC-ready SEL images✨
pvics.yaml(5)Configuration file for pvics SEL EBC image conversion tool✨
pvimg(1)Create and inspect IBM Secure Execution images✨
pvimg-create(1)Create an IBM Secure Execution image✨
pvimg-info(1)Print information about the IBM Secure Execution image✨
pvimg-test(1)Test different aspects of an existing IBM Secure Execution image✨
pvsecret(1)Manage secrets for IBM Secure Execution guests✨
pvsecret-add(1)Submit an add-secret request to the Ultravisor (s390x only)✨
pvsecret-create(1)Create a new add-secret request✨
pvsecret-create-association(1)Create an association secret✨
pvsecret-create-meta(1)Create a meta secret✨
pvsecret-create-retrievable(1)Create a retrievable secret✨
pvsecret-create-update-cck(1)Update customer communication key✨
pvsecret-list(1)List all ultravisor secrets (s390x only)✨
pvsecret-lock(1)Lock the secret-store (s390x only)✨
pvsecret-retrieve(1)Retrieve a secret from the UV secret store (s390x only)✨
pvsecret-verify(1)Verify that an add-secret request is sane✨
pvverify(1)Tool to verify host-keys✨

Q

qeth_configure(8)Configures or deconfigures a HiperSocket adapter or an IBM Open Systems Adapter (OSA) in QDIO mode✨
qetharp(8)querying and modifying ARP data.✨
qethconf(8)Configure QETH functions IPA, VIPA and Proxy ARP.✨
qethqoat(8)query the OSA address table✨

R

read_values(8)Read information from the /sys and /proc filesystems for SUSE Customer Center (SCC) and the like.✨

T

ts-shell(1)Login shell for terminal servers over z/VM IUCV✨
ttyrun(8)Start a program if a specified terminal device is available✨
tunedasd(8)A tool to adjust tunable parameters on DASD devices✨

V

vmcp(8)send commands to the z/VM control program✨
vmur(8)Work with z/VM spool file queues✨

Z

zcryptctl(8)display information and administrate zcrypt multiple device nodes✨
zcryptstats(8)Display usage statistics of IBM Crypto Express adapters✨
zfcp_disk_configure(8)Configures or deconfigures a zfcp-attached SCSI Logical Unit (LU).✨
zfcp_host_configure(8)Configures or deconfigures a zFCP host bus adapter (HBA).✨
zfcpdbf(8)zfcp trace data sort/analyse tool.✨
zgetdump(8)Tool for copying and converting IBM zSystems dumps✨
ziomon(8)Collect data for performance analysis of fcp adapters.✨
ziomon_fcpconf(8)Collect configuration data for fcp adapters.✨
ziomon_mgr(8)Message queue server for the ziomon framework.✨
ziomon_util(8)monitoring tool for fcp host adapters.✨
ziomon_zfcpdd(8)monitor zfcp through blktrace drv_data traces✨
ziorep_config(8)Configuration report for the ziomon framework.✨
ziorep_traffic(8)I/O traffic report for FCP adapters.✨
ziorep_utilization(8)Utilization report for FCP adapters.✨
zipl(8)boot loader for IBM S/390 and zSeries architectures✨
zipl-editenv(8)zIPL environment editor.✨
zipl-switch-to-blscfg(8)Switch zipl to use BootLoaderSpec configuration✨
zipl.conf(5)zipl configuration file✨
zkey(1)Manage secure AES or HMAC keys✨
zkey-cryptsetup(1)Manage secure AES or HMAC volume keys of volumes encrypted with LUKS2 and the paes cipher, and optionally integrity protected with the phmac cipher.✨
zkey-ekmfweb(1)Key management system plugin for EKMF Web (IBM Enterprise Key Management Foundation - Web Edition)✨
zkey-kmip(1)Key management system plugin for Key Management Interoperability Protocol (KMIP)✨
zmemtopo(8)Show CEC memory topology data on IBM Z✨
znetconf(8)list and configure network devices for System z network adapters✨
zpcictl(8)Manage PCI devices on IBM Z✨
zpcimon(8)Monitor health of directly attached PCI devices including NVMes and NICs.✨
zpwr(1)Display power readings of a partition and central processor complex (CPC) on an IBM Z or LinuxONE server.✨