RFC 5324
MIB for Fibre-Channel Security Protocols (FC-SP)
RFC 5324: MIB for Fibre-Channel Security Protocols (FC-SP) 🎀
okay bestie, this one is a MIB spec for FC-SP, the security protocols for Fibre Channel 🔐✨ It's a Standards Track doc, which means it's a real protocol spec, not just a vibe. It was written by C. DeSanti, F. Maino, and K. McCloghrie at Cisco Systems, and it's dated September 2008 🍓 It's part of the Network Working Group series. Nothing is listed as obsoleted or updated in the header, so this one stands on its own 💅
Status of This Memo 📜
so this doc is an Internet standards track protocol for the Internet community, and the authors are asking for discussion and suggestions to make it better 🫶 If you want to know where it sits in the official standardization process, check the current edition of "Internet Official Protocol Standards" (STD 1). And yes, distribution is totally unlimited, so share away 🌈
Abstract 🦋
this memo defines a chunk of the Management Information Base (MIB), which is what network management protocols use to look at stuff 👀 The specific bit it covers is managed objects for FC-SP, the Security Protocols for Fibre Channel. Main character energy 👑
Table of Contents 📑
1. Introduction ....................................................3
2. The Internet-Standard Management Framework ......................3
3. Overview of Fibre Channel .......................................3
3.1. Introduction ...............................................3
3.2. Zoning .....................................................4
3.3. Virtual Fabrics ............................................5
3.4. Security ...................................................5
3.4.1. Authentication ......................................5
3.4.2. Security Associations ...............................6
3.4.3. Fabric Security Policies ............................7
3.4.4. Policy Model ........................................8
3.4.5. Policy Objects ......................................9
3.4.5.1. Policy Object Names .......................10
3.4.6. Three Kinds of Switches ............................10
3.4.7. Security Policy Management .........................11
3.4.8. FC-SP Zoning .......................................11
4. Document Overview ..............................................12
4.1. Fibre Channel Management Instance .........................12
4.2. Entity Name ...............................................12
4.3. Fabric Index ..............................................13
4.4. Interface Index ...........................................13
4.5. Syntax for Policy Object Names ............................14
4.6. Certificates, CAs, and CRLs ...............................14
4.7. Traffic Selectors .........................................15
4.8. The MIB Modules ...........................................16
4.8.1. The T11-FC-SP-TC-MIB Module ........................16
4.8.2. The T11-FC-SP-AUTHENTICATION-MIB Module ............16
4.8.3. The T11-FC-SP-ZONING-MIB Module ....................16
4.8.4. The T11-FC-SP-POLICY-MIB Module ....................17
4.8.5. The T11-FC-SP-SA-MIB Module ........................17
4.9. Rate Control for Notifications ............................18
5. Relationship to Other MIB Modules ..............................19
6. MIB Module Definitions .........................................20
6.1. The T11-FC-SP-TC-MIB Module ...............................20
6.2. The T11-FC-SP-AUTHENTICATION-MIB Module ...................33
6.3. The T11-FC-SP-ZONING-MIB Module ...........................52
6.4. The T11-FC-SP-POLICY-MIB Module ...........................64
6.5. The T11-FC-SP-SA-MIB Module ..............................152
7. IANA Considerations ...........................................204
8. Security Considerations .......................................204
8.1. Information Not Defined in This Document .................204
8.2. The T11-FC-SP-TC-MIB Module ..............................204
8.3. The T11-FC-SP-AUTHENTICATION-MIB Module ..................205
8.4. The T11-FC-SP-ZONING-MIB Module ..........................206
8.5. The T11-FC-SP-POLICY-MIB Module ..........................207
8.6. The T11-FC-SP-SA-MIB Module ..............................209
8.7. Recommendations Common to All MIB Modules ................211
9. Normative References ..........................................212
10. Informative References .......................................213
11. Acknowledgements .............................................2151. Introduction ✨
same energy as the abstract: this memo defines a portion of the Management Information Base (MIB) for network management protocols in the Internet community 💜 It describes managed objects for info about the Fibre Channel Security Protocols (FC-SP), as specified in [FC-SP]. The FC-SP standard is a whole package deal. It covers protocols to authenticate Fibre Channel entities 🪪, protocols to set up session keys 🗝️, protocols to negotiate the parameters needed for frame-by-frame integrity and confidentiality 🛡️, and protocols to establish and distribute policies across a Fibre Channel Fabric 📋
this memo was first developed by the INCITS T11 committee (http://www.t11.org), which then approved it for forwarding to the IETF 🦋
this memo uses one of the following terms:
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].
2. The Internet-Standard Management Framework 🌸
if you want the full tour of the current Internet-Standard Management Framework, go read section 7 of RFC 3410 [RFC3410] 📚
managed objects are accessed through a virtual information store called the Management Information Base, or MIB 🗂️ MIB objects are usually accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant with SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580 [RFC2580] 🧚
3. Overview of Fibre Channel 🍓
3.1. Introduction 🌈
Fibre Channel (FC) is logically a bidirectional point-to-point serial data channel, and it's built for high performance 🚀 It's a general transport vehicle for higher-level protocols like Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), IEEE 802.2, and more 💖
physically, Fibre Channel is a bunch of communication points called N_Ports, which are connected either through a switching network called a Fabric or by a point-to-point link 🔗 A Fibre Channel "Node" is made of one or more N_Ports. A Fabric can have multiple Interconnect Elements, and some of them are Switches. An N_Port hooks into the Fabric through a port on a Switch called an F_Port 🔌 When several FC Nodes share a single Switch port in an "Arbitrated Loop" topology, the Switch port is called an FL_Port, and the Nodes' ports are called NL_Ports. The term Nx_Port means either an N_Port or an NL_Port, and the term Fx_Port means either an F_Port or an FL_Port 🫶 A Switch port linked to another Switch port over an Inter-Switch Link (ISL) is called an E_Port. A B_Port connects a bridge device to an E_Port on a Switch, and it gives you a subset of E_Port functionality 🌉
a lot of Fibre Channel components have globally unique names, including the Fabric, each Node, and most ports 🪪 These names are usually formatted as World Wide Names (WWNs). You can find more on WWNs in [FC-FS-2]. WWNs are expected to stay persistent across agent and unit resets ✨
Fibre Channel frames carry 24-bit address identifiers that show the source and destination ports of the frame 📮 Each FC port has both an address identifier and a WWN. When a Fabric is in use, the FC address identifiers are dynamic and get assigned by a Switch. Each octet of a 24-bit address is a level in an address hierarchy, and the Domain_ID is the highest level 🪜
3.2. Zoning 🚧
zones inside a Fabric are a way to control frame delivery between Nx_Ports (that's "Hard Zoning"), or to show selected views of Name Server information (that's "Soft Zoning") 👀
communication only works when the endpoints talking to each other are members of a common zone. It's kinda like virtual private networks, because the Fabric can group devices into Zones 🫧
hard zoning and soft zoning are two different ways of doing this. Hard zoning is enforced in the Fabric (so, the Switches) 🔒 Soft zoning is enforced at the endpoints (like Host Bus Adapters) 🤝 It works by relying on the endpoints to not send traffic to an N_Port_ID they didn't get from the Name Server, with a few exceptions for well known Addresses, like the Name Server itself 💅
admins create Zones to boost network security and prevent data loss or corruption, by controlling access between devices or user groups 🛡️
3.3. Virtual Fabrics 🦋
the standard for an interconnecting Fabric containing multiple Fabric Switch elements is [FC-SW-4]. [FC-SW-4] keeps the earlier spec for running a single Fabric on a physical infrastructure, and then adds the definition of Virtual Fabrics and how multiple Virtual Fabrics can run within one or more physical infrastructures 🌸 Virtual Fabrics let each frame be tagged in its header to show which of several Virtual Fabrics it's being sent on 🏷️ All frames that enter a particular "Core Switch" [FC-SW-4] (aka one physical Switch) on the same Virtual Fabric get processed by the same "Virtual Switch" inside that Core Switch 🧚
3.4. Security 🔐
the Fibre Channel Security Protocols (FC-SP) standard [FC-SP] describes the protocols used to implement security in a Fibre Channel Fabric. It defines:
- protocols to authenticate Fibre Channel entities 🪪
- protocols to set up session keys 🗝️
- protocols to negotiate the parameters needed for frame-by-frame integrity and confidentiality 🛡️
- protocols to establish and distribute (security) policies across a Fibre Channel Fabric 📋
3.4.1. Authentication
Okay so two entities can negotiate whether authentication is required and which Authentication Protocol they're gonna use 🤝 Authentication can be used in Switch-to-Switch, Node-to-Switch, and Node-to-Node communication. The defined Authentication Protocols are able to do mutual authentication with optional shared key establishment ✨ and the shared key computed at the end of an Authentication Transaction may be used to set up Security Associations 🔐
The Fabric security architecture is set up for several authentication infrastructures, so it's giving options 💅 Secret-based, certificate-based, and password-based infrastructures are all accommodated, and specific authentication protocols that directly use these three infrastructures are defined 🎀
With a secret-based infrastructure, entities in the Fabric that want a security relationship either share a common secret or hand off the secret administration to an external server, like RADIUS [RFC2865], Diameter [RFC3588], or Terminal Access Controller Access Control System (TACACS) [RFC1492] 🗝️ Entities may mutually authenticate with other entities using the Diffie-Hellman Challenge Handshake Authentication Protocol (DH-CHAP) [FC-SP]. Security Associations may be set up using the session key computed at the end of the DH-CHAP transaction 🌸
With a certificate-based infrastructure, entities in the Fabric are certified by a trusted Certificate Authority (CA) 📜 The resulting certificates bind each entity to a public-private key pair that may be used to mutually authenticate with other certified entities through the Fibre Channel Certificate Authentication Protocol (FCAP) [FC-SP]. Security Associations may be set up using these entity certificates and associated keys, or by using the session key computed at the end of the FCAP transaction 🦋
With a password-based infrastructure, entities in the Fabric that establish a security relationship know the password-based credential material of other entities 🔑 Entities may use this credential material to mutually authenticate with other entities using the Fibre Channel Password Authentication Protocol (FCPAP) [FC-SP]. Security Associations may be set up using the session key computed at the end of the FCPAP transaction 💜
Besides DH-CHAP, FCAP, and FCPAP, there's one more Authentication Protocol: Internet Key Exchange Protocol version 2-AUTH (IKEv2-AUTH) 👑 It uses an SA Management Transaction of the Security Association Management Protocol (see below) to do two jobs at once: SA management and authentication. The credentials used in an IKEv2-AUTH transaction are either strong shared secrets or certificates 🧚
3.4.2. Security Associations
A subset of the IKEv2 protocol [RFC4306] that's suitable for Fibre Channel is defined as the (Fibre Channel) Security Association Management protocol [RFC4595]. This protocol (which is not IPsec 🙅♀️) gives you a way to establish Security Associations (SAs) between Fibre Channel entities. Traffic Selectors specify which type of traffic has to be protected by which SA, and what the characteristics of that protection are. There are two mechanisms for protecting specific classes of traffic:
ESP_Headeris used to protect FC-2 frames (see [FC-FS-2] and the conceptually similar mechanisms in [RFC4303]), andCT_Authenticationis used to protect CT_IUs (Common Transport Information Units) [FC-GS-5].
An entity protecting specific classes of traffic keeps an internal Security Association Database (SADB) with the currently active Security Associations and Traffic Selectors 🗂️
Each active SA has a Security Association entry in the SADB. Each SA entry includes the SA's SPI (the Security Parameters Index, which shows up in frames sent on the SA), a Sequence Number counter, and the parameters for the selected transforms (like the encryption algorithm, integrity algorithm, mode of operation of the algorithms, and keys) 🍓
Each active Traffic Selector has an entry in the SADB that says whether it's used for ingress traffic or egress traffic. These Traffic Selector entries are ordered, so they get searched (when checking for a match) in the given order 📋 Two types of Traffic Selector entries may be present:
- Traffic Selector entries identifying FC-2 frames or CT_IUs to be bypassed or discarded; and
- Traffic Selector entries identifying FC-2 frames or CT_IUs to be protected or verified. These entries point to the corresponding SA entry that defines the parameters and the security processing to be performed.
SAs are unidirectional, but they always exist as an SA pair of the same type, one in each direction 🔁✨
3.4.3. Fabric Security Policies
There are two separate approaches to defining Policies in FC-SP, but both follow the same general concept for their Policy model 💖 The first one defines a Policy Model for Fabric Policies that focus on Security. These Security Policies specify the membership and connectivity allowed within a Fabric, and also which IP hosts are allowed to manage a Fabric 🛡️
The other approach is a variant of the Enhanced Zoning model defined in [FC-SW-4] and [FC-GS-5], with extensions for use in a secure environment. This variant of Zoning, denoted as "FC-SP Zoning", follows the same general concepts as the Policy model for Security Policies, but keeps Zoning management and enforcement completely independent from the management and enforcement of other policies 🌈
3.4.4. Policy Model
Figure 25 of [FC-SP] depicts FC-SP's policy management model like this 🎨
***** ************************
* * * Policy * *********************
* M * Add, * Configuration * * Policy *
* A * Get, * Entity * * Enforcement *
* N * Remove * * * Entity *
* A * Policy * +----------------+ * * *
* G * Objects * | Non-Active | * * +-------------+ *
* I *<-------->* | Policy Objects |==*====*=>| Active | *
* N * * +----------------+ * * | Policy | *
* G * ************************ * | Objects | *
* * * +-------------+ *
* * Activate Policy Summary * *
* E *=====================================>* +-------------+ *
* N * Deactivate Policy Summary * | Policy | *
* T *=====================================>* | Summary | *
* I * * | Object | *
* T * Get Policy Summary * +-------------+ *
* Y *<-------------------------------------* *
* * Get Policy Objects * *
* *<-------------------------------------* *
***** *********************Note that the arrows in the picture are used to show the movement of "data", not the direction of "messages". For example, a "Get" (with no data) in one direction that triggers a "Response" (typically with data) in the reverse direction, the diagram only has arrows for the "with data" direction 🧐
3.4.5. Policy Objects
The Policies a Fabric enforces are specified in a set of Policy Objects 📦 The various types of Policy Objects are:
- The Policy Summary Object is a list of pointers to other Policy Objects, one pointer per each other active Policy Object. Each pointer in a Policy Summary Object is paired with a cryptographic hash of the referenced Policy Object.
- The Switch Membership List Object is a Fabric-wide Policy Object that defines which Switches are allowed to be part of a Fabric.
- The Node Membership List Object is a Fabric-wide Policy Object that defines which Nodes are allowed to be connected to a Fabric.
- The IP Management List Object is a Fabric-wide Policy Object that describes which IP hosts are allowed to manage a Fabric.
- A Switch Connectivity Object is a per-Switch Policy Object that describes the topology restrictions for a specific Switch. It specifies the other Switches or Nodes that the particular Switch may be connected to, at the Node level and/or at the Port level.
- Attribute Objects are Fabric-wide Policy Objects that define optional attributes to be associated with Switches or Nodes. They let you extend this policy model by defining new attributes as required 🌟
Note that the administratively specified name for a Fabric lives in the Switch Membership List Object (not in the Policy Summary Object) 🏷️
When FC-SP is in use, each Fabric has a set of active Policy Objects:
- one Policy Summary Object,
- one Switch Membership List Object,
- one Node Membership List Object,
- one IP Management List Object,
- zero or more Switch Connectivity Objects, and
- zero or more Attribute Objects.
The active Policy Objects specify the Policies currently being enforced. Policies that aren't being enforced right now live in non-active Policy Objects. To change the active Policy Objects, you edit the non-active Policy Objects as needed, and then activate a new Policy Summary Object that includes or references the changed Policy Objects 🔄
3.4.5.1. Policy Object Names
Every Policy Object has a name. In a Fabric's database of Policy Objects, a Policy Object Name is specified as a type/length/value (see section 7.2 of [FC-SP]) 🧩 The possible types are:
Node_Name- Restricted
Node_Name Port_Name- Restricted
Port_Name - Wildcard
- Negated Wildcard
- Alphanumeric Name
- IPv6 Address Range
- IPv4 Address Range
3.4.6. Three Kinds of Switches
For a Fabric made of n Switches and m Nodes, the potential complexity of Switch Connectivity Objects is O(n**2) to describe Switch-to-Switch connections, and O(n*m) for Switch-to-Node connections. To scale better, Switch Connectivity Objects aren't Fabric-wide information. They're only distributed to where they're needed 📡 To support this, the policy model supports three kinds of Switches in a Fabric:
- Server Switches, which maintain the Fabric-wide Policy Objects, all the Switch Connectivity Objects, and a full copy of the FC-SP Zoning Database;
- Autonomous Switches, which maintain the Fabric-wide Policy Objects, their own Switch Connectivity Object, and a full copy of the FC-SP Zoning Database; and
- Client Switches, which maintain the Fabric-wide Policy Objects, their own Switch Connectivity Object, and a subset of the FC-SP Active Zone Set (which is the configurations of zones currently being enforced by a Fabric, see section 10.4.3.3 of [FC-SW-4]) 🦋
3.4.7. Security Policy Management ✨
okay so Security Policy can be changed in a server session [FC-GS-5] with a Security Policy Server 🔐 All write access to a Security Policy Server happens inside a server session, so no sneaking edits in. Read access is allowed at any time 👀 but the consistency of what you get back is only guaranteed inside a server session 💅
The Enhanced Commit Service [FC-SW-4] is what handles Fabric operations whenever they're needed (see table 144 of [FC-SP]) 🎀 A lot of these operations have acronym-style names: SSB for Server Session Begin, SSE for Server Session End, SW_ILS for Switch Fabric Internal Link Services, EACA for Enhanced Acquire Change Authorization, ERCA for Enhanced Release Change Authorization, and SFC for Stage Fabric Configuration 🧚
Each server session begins and ends with an SSB request and an SSE request respectively, both sent to a Security Policy Server 🦋 On the Fabric side, the SSB asks for a lock on the Fabric through an EACA SW_ILS, and the SSE asks for that lock to be released through the ERCA SW_ILS [FC-SW-4] 🔓 Active and non-active Policy Objects are persistent, which means they survive after the server session ends 💜
3.4.8. FC-SP Zoning 🌸
to keep things backward compatible with existing Zoning definitions and implementations, FC-SP Zoning is defined as a variant of the Enhanced Zoning model from [FC-SW-4] and [FC-GS-5] 🫶 It follows the general ideas of the Policy model for Security Policy Management, but Zoning management and enforcement stay completely independent from each other 🙈
FC-SP Zoning lets some Switches keep less than a complete replicated copy of the Zoning Database, like this:
- Server Switches maintain the policies data structures for all Switches in the Fabric plus a replica of the Zoning data structures;
- Autonomous Switches maintain only the subset of policies data structures relevant for their operations plus a replica of the Zoning Database; and
- Client Switches maintain only the subset of policies data structures and the subset of the Active Zone Set relevant for their operations.
so if Client Switches are deployed in a Fabric, at least one Server Switch has to be deployed in that same Fabric too 🍓 A client-server protocol lets Client Switches dynamically retrieve the Zoning information they might need from the Server Switches 👑
A management application handles the Fabric Zoning configuration through the Fabric Zone Server, while other policies are managed through the Security Policy Server ✨ A new Zoning Check Protocol replaces the Zone Merge Protocol [FC-SW-4], and new command codes are defined for the SFC SW_ILS so the FC-SP Zoning configuration can be distributed across a Fabric 🔥 The Zoning definitions are ordered so a hash of the Active Zone Set and a hash of the Zone Set Database can be computed, plus other optional security data (e.g., for integrity protection of Zoning information) 🌈 the ordering is literally what makes the hashes possible, so don't skip past it bestie 💅
4. Document Overview ✨
okay so this document defines five MIB modules that together give you the means to monitor the operation of, and configure some parameters of, one or more instances of the FC-SP protocols 💖
4.1. Fibre Channel Management Instance
A Fibre Channel management instance is defined in [RFC4044] as a separable managed instance of Fibre Channel functionality 🦋 Fibre Channel functionality can be grouped into Fibre Channel management instances in whatever way is most convenient for the implementation(s) 🧚 For example, one such grouping accommodates a single SNMP agent having multiple AgentX [RFC2741] sub-agents, with each sub-agent implementing a different Fibre Channel management instance 🎀
The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB [RFC4044] as the index value that uniquely identifies each Fibre Channel management instance, for example, within the same SNMP context ([RFC3411] section 3.3.1) 💜
4.2. Entity Name
A central capability of FC-SP is the use of an Authentication Protocol 🔐 The purpose of each possible Authentication Protocol is to let a Fibre Channel entity be assured of the identity of each entity it's communicating with. Examples of such entities are Fibre Channel Switches and Fibre Channel Nx_Ports 💅
Each entity is identified by a name, and the FC-MGMT-MIB [RFC4044] defines MIB objects for those names:
- for entities that are Fibre Channel Switches, the definition of a Fibre Channel management instance allows multiple Switches to be managed by the same Fibre Channel management instance. In this case, each entity is a Switch and has the name given by the MIB object,
fcmSwitchWWN. - for entities other than Fibre Channel Switches, a Fibre Channel management instance can manage only one entity, and the name of the entity is given by the MIB object,
fcmInstanceWwn.
4.3. Fabric Index
With multiple Fabrics, each Fabric has its own instances of the Fabric-related management instrumentation 🌸 So these MIB modules define all Fabric-related information in tables that are INDEX-ed by an arbitrary integer, named a "Fabric Index" 🫶 The syntax of a Fabric Index is T11FabricIndex, imported from T11-TC-MIB [RFC4439] 💫 When a device is connected to a single physical Fabric, without using any virtual Fabrics, the value of this Fabric Index will always be 1 ✨ In an environment with multiple virtual and/or physical Fabrics, this index is how you tell one Fabric from another 👑
4.4. Interface Index
Several of the MIB modules defined in this document use the InterfaceIndexOrZero syntax so information can be specified or instantiated on a per-port/interface basis, e.g., for: statistics, Traffic Selectors, Security Associations, etc. 🦋 This lets the same object be used either when there is a separate row for each of multiple ports/interfaces, or when multiple interfaces are represented by a single row 🍓 The use of a zero value supports the simpler cases of: a) when there is only one port/interface, b) where the implementation chooses to aggregate the information for multiple ports/interfaces. The minimum (for compliance) requirement is to implement any one of the above cases 🙈
When a Fabric Index and an object with the InterfaceIndexOrZero syntax are used together in a single INDEX clause, the InterfaceIndexOrZero object is listed before the Fabric Index 🌈 That order makes it easier to run management queries that retrieve information about multiple Fabrics connected to the same port/interface 🧚
4.5. Syntax for Policy Object Names
T11FcSpPolicyNameType and T11FcSpPolicyName are two Textual Conventions defined in this document (in the T11-FC-SP-TC-MIB module) to represent the types and values of Policy Object Names (see section 3.4.5.1 above) 🎀 However, two of the nine possible types are IPv4 Address Range and IPv6 Address Range 👀 It's standard practice in MIB modules to represent all IP addresses using the standard Textual Conventions defined in [RFC4001] for IP addresses, specifically InetAddressType and InetAddress 💅 This document follows that standard practice to the following extent:
- for MIB objects representing a Policy Object Name that can only be an IPv4 Address Range or an IPv6 Address Range, then those MIB objects are defined as a 3-tuple: (
InetAddressType,InetAddress,InetAddress), in which the first address is the low end of the range, the second address is the high end of the range, and both addresses are of the type given byInetAddressType. - for MIB objects representing a Policy Object Name that is (possibly) of a different type, i.e., it is not (necessarily) an IPv4 or IPv6 Address Range, then those MIB objects are defined as a 2-tuple: (
T11FcSpPolicyNameType,T11FcSpPolicyName), in which the first object represents the type of Policy Object Name and the second object represents the value of the Policy Object Name. For MIB objects defined in this manner, if and when they represent a range of IP addresses: a) the value ofT11FcSpPolicyNameTypedifferentiates between an IPv4 Address Range and an IPv6 Address Range; and b) the value ofT11FcSpPolicyNameis one string containing the concatenation of the two addresses that are the low and high addresses of the range. This is the same format as used within FC-SP Policy Objects [FC-SP] 🌸
4.6. Certificates, CAs, and CRLs
In order to authenticate with the FCAP protocol, each entity, identified by a unique Name, is provided with: a digital certificate associated with that Name, the private/public key pair that corresponds to the certificate, and the Root Certificate (the certificate of the signing Certification Authority) 🔑 To authenticate another entity, an entity is required to be provided with the certificate of the associated Certification Authority 🫶
FCAP requires entities to support at least four Root Certificates against which received corresponding certificates can be validated 💖 Support for certificate chains, and verification of certificate chains containing more than one certificate, is optional 🦋 Entities need to be able to access a Certificate Revocation List (CRL) for each configured Root Certificate, if one is available from the CA 🌈 Certificates on the CRL are considered invalid 💀
The management of certificates, Certification Authorities, and Certificate Revocation Lists is the same in Fibre Channel networks as it is in other networks. Therefore, this document does not define any MIB objects for such management 🧚
4.7. Traffic Selectors
When Traffic Selectors are compared against an ingress or egress frame to determine the security processing to be applied to that frame, there are circumstances where multiple Traffic Selectors, specifying different actions, can match the frame 👀 Specifically, this happens when matching against an egress frame to decide which active Security Association to transmit on, or against an ingress frame unprotected by FC-SP (i.e., without an SPI value in it) to decide which action ('drop' or 'bypass') to apply 💅 For these cases, the MIB includes a unique precedence value for each Traffic Selector, so the one with the numerically lowest precedence value is determined to be the one that matches 🎀 In contrast, ingress frames on active Security Associations (i.e., protected by FC-SP) are compared against the set of traffic selectors negotiated when the Security Association was set up and identified by the SPI value contained in the frame. The action taken depends on whether any Traffic Selector matches, but not on which one 🔥
This difference between ingress and egress Traffic Selectors on active Security Associations is reflected in having separate MIB tables for them: the table for Traffic Selectors on egress SAs, t11FcSpSaTSelNegOutTable, has a precedence value in its INDEX clause, whereas the table for Traffic Selectors on ingress SAs, t11FcSpSaTSelNegInTable, has an arbitrary integer value in its INDEX clause 🌸 For 'drop' and 'bypass' Traffic Selectors, one table, t11FcSpSaTSelDrByTable, having a precedence value in its INDEX clause, is sufficient for both ingress and egress traffic 💜
4.8. The MIB Modules
4.8.1. The T11-FC-SP-TC-MIB Module 💖
Okay so this MIB module is the Textual Conventions grab bag ✨. It holds the ones that are being used, or have the potential to be used, in more than one MIB module 🧚. It also hands out Object Identifiers for the Cryptographic Algorithms listed in [FC-SP], so they can be the value of various MIB objects that say which algorithms an FC-SP implementation is using, or is going to use 🔐.
4.8.2. The T11-FC-SP-AUTHENTICATION-MIB Module 🎀
This is the management info you need to manage the FC-SP Authentication Protocols 🫶. It has three tables:
t11FcSpAuEntityTable-- a table of Fibre Channel entities that can be authenticated using FC-SP's Authentication Protocols, including the names, capabilities, and basic configuration parameters of the entities.t11FcSpAuIfStatTable-- this one has two jobs: it's a list of how an FC-SP Authentication entity maps onto an interface, and it holds Authentication Protocol per-interface statistics 📊.t11FcSpAuRejectTable-- a table of FC-SP Authentication Protocol transactions that were recently rejected 🙈.
It also defines two notifications: one for sending a reject in response to an AUTH message, and another for receiving a reject in response to an AUTH message 🔔.
4.8.3. The T11-FC-SP-ZONING-MIB Module 🦋
This MIB module extends the T11-FC-ZONE-SERVER-MIB module [RFC4936] so you can manage FC-SP Zoning Servers 🌸. Specifically, it augments three tables in T11-FC-ZONE-SERVER-MIB:
t11FcSpZsServerTable-- this table gets FC-SP Zoning information defined for Zone Servers.t11ZsStatsTable-- this table gets FC-SP Zoning statistics for Zone Servers.t11ZsNotifyControlTable-- this table gets control information for FC-SP Zoning notifications.
It also defines two FC-SP Zoning notifications: one for success and one for failure when two Fabrics try to join ⭐.
4.8.4. The T11-FC-SP-POLICY-MIB Module 💅
This MIB module is all about managing FC-SP policies 👑. It has five parts:
- Active Policy Objects -- read-only MIB objects representing the set of active Policy Objects for each Fabric.
- Activate/Deactivate Operations -- read-write MIB objects for invoking operations, either 1) to activate policies that are specified as a set of non-active Policy Objects, or 2) to deactivate the currently active policies. There are also objects giving the status of invoked operations.
- Non-Active Policy Objects -- read-create MIB objects to create and modify non-active Policy Objects.
- Statistics for FC-SP Security Policy Servers 📈.
- The definition and control of notifications for the success or failure of the activation or deactivation of FC-SP policies 🔥.
4.8.5. The T11-FC-SP-SA-MIB Module 🌈
This MIB module covers the management info you need to manage Security Associations established via FC-SP. Every table in this MIB module is INDEX-ed by t11FcSpSaIfIndex, with syntax InterfaceIndexOrZero. That value is either non-zero for a specific interface, or zero for all (of the management instance's) interfaces to the particular Fabric 💜.
The MIB module has six parts:
- A per-Fabric table,
t11FcSpSaIfTable, of capabilities, parameters, status information, and counters. The counters include non-transient aggregates of per-SA transient counters. - Three tables,
t11FcSpSaPropTable,t11FcSpSaTSelPropTable, andt11FcSpSaTransTable, specify the proposals an FC-SP entity acting as an SA_Initiator presents to the SA_Responder while Security Associations are being negotiated. The same information is also used by an FC-SP entity acting as an SA_Responder to decide what to accept during that negotiation. One of these tables,t11FcSpSaTransTable, is used not only for information about security transforms to propose and to accept, but also for what's agreed upon during the negotiation of Security Associations 🤝. - A table,
t11FcSpSaTSelDrByTable, of Traffic Selectors that have the security action of 'drop' or 'bypass'. This action applies either to ingress traffic, which is unprotected by FC-SP, or to all egress traffic 🚫. - Four tables,
t11FcSpSaPairTable,t11FcSpSaTSelNegInTable,t11FcSpSaTSelNegOutTable, andt11FcSpSaTSelSpiTable, contain information about active bidirectional pairs of Security Associations. In particular,t11FcSpSaPairTablehas one row per active bidirectional SA pair.t11FcSpSaTSelNegInTableandt11FcSpSaTSelNegOutTablecontain information on the Traffic Selectors negotiated on the SAs. Thet11FcSpSaTSelSpiTableis an alternate lookup table, so the Traffic Selector(s) in use on a particular Security Association can be quickly determined based on its (ingress) SPI value 🔍. - A table,
t11FcSpSaControlTable, of control and other information about generating notifications for events related to FC-SP Security Associations 🛎️. - One notification,
t11FcSpSaNotifyAuthFailure, generated when an Authentication failure happens for a received FC-2 or CT_IU frame 🚨.
4.9. Rate Control for Notifications 🛑
Almost every notification in the five MIB modules in this document is generated by events in the "control plane", such as notifications that happen at the pace of operator-initiated activities 🧑💻. The one exception is t11FcSpSaNotifyAuthFailure. It's generated by an event in the "data plane", and in a worst case scenario it could happen for every received ingress frame 😭. So rate controlling notification generation is needed for t11FcSpSaNotifyAuthFailure, but not for any of the other notifications 💅.
For t11FcSpSaNotifyAuthFailure, rate control works like this: a) after the first Authentication failure on any particular Security Association, the SNMP notifications for second and subsequent failures are suppressed for the duration of a time window. And b) even the notification for the first occurrence is suppressed after it has been sent in the same time window, for a configured (in t11FcSpSaControlMaxNotifs) number of Security Associations within a Fabric 🪟. Note that while these suppressions keep the network from being flooded with notifications, the Authentication Failures themselves must still be detected and counted 🧾.
The length of the time window is given by t11FcSpSaControlWindow, a read-write object in the t11FcSpSaControlTable ⏱️. If and when the time since the last generation of the notification is less than the value of sysUpTime (e.g., if one or more notifications have occurred since the last re-initialization of the management system), then t11FcSpSaControlElapsed and t11FcSpSaControlSuppressed contain the elapsed time since the last notification and the number of notifications suppressed in the window after sending the last one, respectively. Otherwise, t11FcSpSaControlElapsed contains the value of sysUpTime, and t11FcSpSaControlSuppressed has the value zero 🌟.
5. Relationship to Other MIB Modules 🧩
The first standardized MIB module for Fibre Channel [RFC2837] was focused on Fibre Channel Switches 🔀. It was obsoleted by the more generic Fibre Channel Management MIB [RFC4044], which defines basic information for Fibre Channel Nodes and Switches. That includes extensions to the standard IF-MIB [RFC2863] for Fibre Channel interfaces 🔌. Several other MIB modules have since been defined to extend [RFC4044] for various specific Fibre Channel functionality (e.g., [RFC4438], [RFC4439], [RFC4625], [RFC4626], [RFC4747], [RFC4936], [RFC4935], and [RFC4983]) 💫.
The MIB modules defined in this memo further extend [RFC4044] to cover the operation of Fibre Channel Security Protocols, as specified in [FC-SP] 🔐.
One part of the FC-SP specification is "FC-SP Zoning", which is an extension/variant of the Fibre Channel Zoning defined in [FC-GS-5]. Management information for the latter is defined in the T11-FC-ZONE-SERVER-MIB module [RFC4936]. So the T11-FC-SP-ZONING-MIB module defined in this document defines the extensions to the T11-FC-ZONE-SERVER-MIB module that are needed to manage FC-SP Zoning 🦩.
The MIB modules in this memo import some common Textual Conventions from T11-TC-MIB, defined in [RFC4439], and from INET-ADDRESS-MIB, defined in [RFC4001] 📥.
If the RADIUS protocol is used for access to an external server, information about RADIUS Servers is likely to be available from the RADIUS-AUTH-CLIENT-MIB [RFC4668] 🛰️.
6. MIB Module Definitions 📜
6.1. The T11-FC-SP-TC-MIB Module 🍓
T11-FC-SP-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, mib-2,
Unsigned32 FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION FROM SNMPv2-TC; -- [RFC2579]
t11FcTcMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module defines Textual Conventions for use in
the multiple MIB modules, which together define the
instrumentation for an implementation of the Fibre Channel
Security Protocols (FC-SP) specification.
This MIB module also defines Object Identities (for use as
possible values of MIB objects with syntax AutonomousType),
including OIDs for the Cryptographic Algorithms defined
in FC-SP.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 175 }
t11FcSpIdentities OBJECT IDENTIFIER ::= { t11FcTcMIB 1 }
t11FcSpAlgorithms OBJECT IDENTIFIER ::= { t11FcSpIdentities 1 }
--
-- Textual Conventions
--Okay bestie, picking up right where we left off 💖 We're now in the textual conventions 🎀 These are the custom little types the MIB reuses everywhere, so every hash, auth reason code, and policy name stays consistent 💅
T11FcSpPolicyHashFormat ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Identifies a cryptographic hash function used to create
a hash value that summarizes an FC-SP Policy Object.
Each definition of an object with this TC as its syntax
must be accompanied by a corresponding definition of an
object with T11FcSpPolicyHashValue as its syntax, and
containing the hash value.
The first two cryptographic hash functions are:
Hash Type Hash Tag Hash Length (Bytes)
SHA-1 '00000001'h 20
SHA-256 '00000002'h 32
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 106.
- FIPS PUB 180-2."
SYNTAX OCTET STRING (SIZE (4))
T11FcSpPolicyHashValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the value of the cryptographic hash function
of an FC-SP Policy Object.
Each definition of an object with this TC as its syntax
must be accompanied by a corresponding definition of an
object with T11FcSpPolicyHashFormat as its syntax.
The corresponding object identifies the cryptographic
hash function used to create the hash value."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 106."
SYNTAX OCTET STRING (SIZE (0..64))
T11FcSpHashCalculationStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"When some kind of 'database' is defined in a set of
read-write MIB objects, it is common that multiple changes
in the data need to be made at the same time. So, if hash
values are maintained for that data, those hash values are
only correct if and when they are re-calculated after every
change. In such circumstances, the use of an object with
this syntax allows the re-calculation of the hash values to
be deferred until all changes have been made, and therefore
the calculation need only be done once after all changes,
rather than repeatedly/after each individual change.
The definition of an object defined using this TC is
required to specify which one or more instances of which
MIB objects contain the hash values operated upon (or
whose status is given) by the value of this TC.
When read, the value of an object with this syntax is
either:
correct -- the identified MIB object instance(s)
contain the correct hash values; or
stale -- the identified MIB object instance(s)
contain stale (possibly incorrect) values.
Writing a value of 'calculate' is a request to re-calculate
and update the values of the corresponding instances of the
identified MIB objects. Writing a value of 'correct' or
'stale' to this object is an error (e.g., 'wrongValue')."
SYNTAX INTEGER {
calculate(1),
correct(2),
stale(3)
}
T11FcSpAuthRejectReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A reason code contained in an AUTH_Reject message, or
in an SW_RJT (rejecting an AUTH_ILS), or in an LS_RJT
(rejecting an AUTH-ELS)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
SYNTAX INTEGER {
authFailure(1),
logicalError(2),
logicalBusy(3),
authILSNotSupported(4),
authELSNotSupported(5),
notLoggedIn(6)
}
T11FcSpAuthRejReasonCodeExp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A reason code explanation contained in an AUTH_Reject
message, or in an SW_RJT (rejecting an AUTH_ILS), or in
an LS_RJT (rejecting an AUTH-ELS)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Tables 18, 48, 52."
SYNTAX INTEGER {
authMechanismNotUsable(1),
dhGroupNotUsable(2),
hashFunctionNotUsable(3),
authTransactionAlreadyStarted(4),
authenticationFailed(5),
incorrectPayload(6),
incorrectAuthProtocolMessage(7),
restartAuthProtocol(8),
authConcatNotSupported(9),
unsupportedProtocolVersion(10),
logicalBusy(11),
authILSNotSupported(12),
authELSNotSupported(13),
notLoggedIn(14)
}
T11FcSpHashFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more hash functions defined for
use in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 14."
SYNTAX BITS {
md5(0),
sha1(1)
}
T11FcSpSignFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more signature functions defined
for signing certificates for use with FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, tables 38 & 39."
SYNTAX BITS {
rsaSha1(0)
}
T11FcSpDhGroups ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of zero, one, or more DH Groups defined for use
in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 15."
SYNTAX BITS {
null(0),
group1024(1),
group1280(2),
group1536(3),
group2048(4),
group3072(5),
group4096(6),
group6144(7),
group8192(8)
}
T11FcSpPolicyObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that identifies the type of an FC-SP Policy
Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 102."
SYNTAX INTEGER {
summary(1),
switchMemberList(2),
nodeMemberList(3),
switchConnectivity(4),
ipMgmtList(5),
attribute(6)
}
T11FcSpPolicyNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The format and usage of a companion object having
T11FcSpPolicyName as its syntax.
Six of the values indicate the same format, i.e., they
differ only in semantics. That common format is a Fibre
Channel 'Name_Identifier', i.e., the same syntax as
'FcNameIdOrZero (SIZE(8))'.
These six are three pairs of one restricted and one
unrestricted. Each usage of this syntax must specify
what the meaning of 'restricted' is for that usage and
how the characteristics and behavior of restricted
names differ from unrestricted names.
The six are:
'nodeName' - a Node_Name, which is the
Name_Identifier associated
with a Fibre Channel Node.
'restrictedNodeName' - a Restricted Node_Name.
'portName' - the Name_Identifier associated
with a Fibre Channel Port.
'restrictedPortName' - a Restricted Port_Name.
'wildcard' - a Wildcard value that is used to
identify 'all others' (typically,
all other members of a Policy
Object, not all other Policy
Objects).
'restrictedWildcard' - a Restricted Wildcard value.
Other possible values are:
'alphaNumericName' - the value begins with an ASCII
letter (upper or lower case) followed by (0 ... 63)
characters from the set: lower case letters, upper case
letters, digits, and the four symbols: dollar-sign ($),
dash (-), caret (^), and underscore (_).
'ipv6AddressRange' - two IPv6 addresses in network
byte order, the numerically smallest first and the
numerically largest second; total length is 32 bytes.
'ipv4AddressRange' - two IPv4 addresses in network
byte order, the numerically smallest first and the
numerically largest second; total length is 8 bytes."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX INTEGER {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6),
alphaNumericName(7),
ipv6AddressRange(8),
ipv4AddressRange(9)
}
T11FcSpPolicyName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A syntax used, when defining Policy Objects, for the
name of something.
An object that uses this syntax always identifies a
companion object with syntax T11FcSpPolicyNameType
such that the companion object specifies the format
and usage of the object with this syntax.
When the companion object has the value 'wildcard' or
'restrictedWildcard', the value of the T11FcSpPolicyName
object is: '0000000000000000'h."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX OCTET STRING (SIZE (1..64))
T11FcSpAlphaNumName ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A syntax used when defining Policy Objects for the
name of something, where the name is always in the format
specified by:
T11FcSpPolicyNameType = 'alphaNumericName'
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 103."
SYNTAX OCTET STRING (SIZE (1..64))okay bestie, the textual conventions keep coming 💅✨
T11FcSpAlphaNumNameOrAbsent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An extension of the T11FcSpAlphaNumName TC with
one additional possible value: the zero-length string
to indicate the absence of a name."
SYNTAX OCTET STRING (SIZE (0..64))
T11FcSaDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of frame transmission on a Security
Association. Note that Security Associations are
unidirectional, but they always exist as part of an
SA pair of the same type in opposite directions."
SYNTAX INTEGER { ingress(1), egress(2) }
T11FcSpiIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An SPI (Security Parameter Index) value is carried in the
SPI field of a frame protected by the ESP_Header. An SPI
is also carried in the SAID field of a Common Transport
Information Unit (CT_IU) protected by CT_Authentication.
An SPI value identifies the Security Association on which
the frame is being transmitted."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 4.7.2 and 4.7.3."
SYNTAX Unsigned32 (0..4294967295) -- the default range!!
T11FcSpPrecedence ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The precedence of a Traffic Selector. If a frame
matches with two or more Traffic Selectors, then the match
that takes precedence is the one with the Traffic Selector
having the numerically smallest precedence value. Note that
precedence values are not necessarily contiguous."
SYNTAX Unsigned32 (0..4294967295) -- the default range!!
T11FcRoutingControl ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"A value stored in the R_CTL (Routing Control) 8-bit field
of an FC-2 frame containing routing and information bits to
categorize the frame function.
For FC-2 frames, an R_CTL value typically distinguishes
between control versus data frames and/or solicited versus
unsolicited frames, and in combination with the TYPE field
(see T11FcSpType), identifies a particular link-layer
service/protocol using FC-2.
For CT_Authentication, the information field in the R_CTL
field contains '02'h for Request CT_IUs and '03'h for
Response CT_IUs.
The comparison of two values having this syntax is done
by treating each string as an 8-bit numeric value."
REFERENCE
"- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
ANSI INCITS 424-2007, Project T11/1619-D,
February 2007, section 9.3.
- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, sections 4.5.2.4.2, 4.5.2.4.3
and table 12."
SYNTAX OCTET STRING (SIZE(1))
T11FcSpType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x"
STATUS current
DESCRIPTION
"A value, or combination of values, contained in a frame
header used in identifying the link layer service/protocol
of a frame. The value is always two octets:
- for FC-2 frames, the first octet is zero and the second
octet contains the Data structure type (TYPE) value
defined by FC-FS-2. The TYPE value is used in
combination with T11FcRoutingControl to identify a link
layer service/protocol.
- for Common Transport Information Units (CT_IUs), the
first octet contains a GS_Type value and the second
octet contains a GS_Subtype value, defined by FC-GS-5.
The comparison of two values having this syntax is done
by treating each string as the numeric value obtained by
numerically combining the individual octet's value as
follows:
(256 * 1st-octet) + 2nd-octet
"
REFERENCE
"- Fibre Channel - Framing and Signaling-2 (FC-FS-2),
ANSI INCITS 424-2007, Project T11/1619-D,
February 2007, section 9.6.
- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, sections 4.3.2.4 and 4.3.2.5."
SYNTAX OCTET STRING (SIZE(2))
T11FcSpTransforms ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A list of the standardized transforms that are defined
by FC-SP for use with ESP_Header, CT_Authentication, and/or
IKEv2 Support."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
Appendix A.3.1, tables A.23, A.24, A.25, A.26."
SYNTAX BITS {
encrNull(0),
encrAesCbc(1),
encrAesCtr(2),
encrAesGcm(3),
encr3Des(4),
prfHmacMd5(5),
prfHmacSha1(6),
prfAesCbc(7),
authHmacMd5L96(8),
authHmacSha1L96(9),
authHmacMd5L128(10),
authHmacSha1L160(11),
encrNullAuthAesGmac(12),
dhGroups1024bit(13),
dhGroups2048bit(14)
}
T11FcSpSecurityProtocolId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Security Protocol identifier to identify
the protocol by which traffic is to be protected,
e.g., ESP_Header or CT_Authentication."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
SYNTAX INTEGER { espHeader(1), ctAuth(2) }
T11FcSpLifetimeLeft ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC is used for one object of an associated pair
of objects. The object with this syntax specifies a
remaining lifetime of something, e.g., of an SA, where
the lifetime is given in the units specified by the other
object of the pair which has T11FcSpLifetimeLeftUnits
as its syntax."
SYNTAX Unsigned32
T11FcSpLifetimeLeftUnits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An object, defined using T11FcSpLifetimeLeft TC as
its syntax, is required to be one of an associated
pair of objects such that the other object of the pair
is defined with this T11FcSpLifetimeLeftUnits TC as
its syntax and with its value specifying the
units of the remaining lifetime given by the
value of the T11FcSpLifetimeLeft object."
SYNTAX INTEGER {
seconds(1), -- seconds
kiloBytes(2), -- 10^^3 bytes
megaBytes(3), -- 10^^6 bytes
gigaBytes(4), -- 10^^9 bytes
teraBytes(5), -- 10^^12 bytes
petaBytes(6), -- 10^^15 bytes
exaBytes(7), -- 10^^18 bytes
zettaBytes(8), -- 10^^21 bytes
yottaBytes(9) -- 10^^24 bytes
}
--
-- Object Identities to identify the Cryptographic Algorithms
-- listed in FC-SP.
--
t11FcSpEncryptAlgorithms
OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 1 }
t11FcSpEncrNull OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_NULL algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 1 }
t11FcSpEncrAesCbc OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_CBC algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 2 }
t11FcSpEncrAesCtr OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_CTR algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 3 }
t11FcSpEncrAesGcm OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_AES_GCM algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 4 }
t11FcSpEncr3Des OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_3DES algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 5 }
t11FcSpAuthAlgorithms
OBJECT IDENTIFIER ::= { t11FcSpAlgorithms 2 }
t11FcSpAuthNull OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_NONE algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 1 }
t11FcSpAuthHmacMd5L96 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_MD5_96 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 2 }
t11FcSpAuthHmacSha1L96 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_SHA1_96 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 3 }
t11FcSpAuthHmacMd5L128 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_MD5_128 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 4 }
t11FcSpAuthHmacSha1L160 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The AUTH_HMAC_SHA1_160 algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 72."
::= { t11FcSpAuthAlgorithms 5 }
t11FcSpEncrNullAuthAesGmac OBJECT-IDENTITY
STATUS current
DESCRIPTION "The ENCR_NULL_AUTH_AES_GMAC algorithm."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 70."
::= { t11FcSpEncryptAlgorithms 6 }
END6.2. The T11-FC-SP-AUTHENTICATION-MIB Module ✨
okay now we're entering the MIB module itself 🦋 this is where the good stuff lives, so the header block comes first 🎀
--********************************************************************
-- FC-SP Authentication Protocols
--
T11-FC-SP-AUTHENTICATION-MIB DEFINITIONS ::= BEGINokay bestie, this is where the MIB module really comes alive 🦋 the imports, the module identity, and the first config objects are all in here, and the stuff in the DESCRIPTION strings is exact on purpose ✨
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
NOTIFICATION-TYPE,
mib-2, Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
StorageType, AutonomousType,
TruthValue, TimeStamp FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex FROM IF-MIB -- [RFC2863]
fcmInstanceIndex,
FcNameIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
t11FamLocalSwitchWwn
FROM T11-FC-FABRIC-ADDR-MGR-MIB -- [RFC4439]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpDhGroups,
T11FcSpHashFunctions,
T11FcSpSignFunctions,
T11FcSpLifetimeLeft,
T11FcSpLifetimeLeftUnits,
T11FcSpAuthRejectReasonCode,
T11FcSpAuthRejReasonCodeExp FROM T11-FC-SP-TC-MIB;
t11FcSpAuthenticationMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage the Authentication Protocols defined by
Fibre Channel's FC-SP specification.
This MIB module defines three tables:
- t11FcSpAuEntityTable is a table of Fibre Channel
entities that can be authenticated using FC-SP's
Authentication Protocols.
- t11FcSpAuIfStatTable is a table with one row for each
mapping of an Authentication entity onto an interface,
containing statistics information.
- t11FcSpAuRejectTable is a table of volatile information
about FC-SP Authentication Protocol transactions
that were most recently rejected.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 176 }
t11FcSpAuMIBNotifications
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 0 }
t11FcSpAuMIBObjects
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 1 }
t11FcSpAuMIBConformance
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 2 }
t11FcSpAuMIBIdentities
OBJECT IDENTIFIER ::= { t11FcSpAuthenticationMIB 3 }
--
-- OIDs defined for use as values of t11FcSpAuServerProtocol
--
t11FcSpAuServerProtocolRadius OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies RADIUS as the protocol used
to communicate with an External Server as part of
the process by which identities are verified.
In this case, information about the RADIUS Servers
is likely to be provided in radiusAuthServerExtTable
defined in the RADIUS-AUTH-CLIENT-MIB."
REFERENCE
"radiusAuthServerExtTable in 'RADIUS Authentication
Client MIB', RFC 4668, August 2006."
::= { t11FcSpAuMIBIdentities 1 }
t11FcSpAuServerProtocolDiameter OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies Diameter as the protocol used
to communicate with an External Server as part of
the process by which identities are verified."
REFERENCE
"RFC 3588, September 2003."
::= { t11FcSpAuMIBIdentities 2 }
t11FcSpAuServerProtocolTacacs OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This OID identifies TACACS as the protocol used
to communicate with an External Server as part of
the process by which identities are verified."
REFERENCE
"RFC 1492, July 1993."
::= { t11FcSpAuMIBIdentities 3 }
--
-- Configuration for the Authentication Protocols
--
t11FcSpAuEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Fibre Channel entities that can be authenticated
using FC-SP's Authentication Protocols.
The purpose of an FC-SP Authentication Protocol is to verify
that a claimed name is associated with the claiming entity.
The Authentication Protocols can be used to authenticate
Nx_Ports, B_Ports, or Switches."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 3.2.25."
::= { t11FcSpAuMIBObjects 1 }
t11FcSpAuEntityEntry OBJECT-TYPE
SYNTAX T11FcSpAuEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the configuration and capabilities of an
FC-SP entity (which is managed within the Fibre Channel
management instance identified by fcmInstanceIndex) on a
particular Fabric with respect to FC-SP's Authentication
Protocols."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuFabricIndex }
::= { t11FcSpAuEntityTable 1 }
T11FcSpAuEntityEntry ::= SEQUENCE {
t11FcSpAuEntityName FcNameIdOrZero,
t11FcSpAuFabricIndex T11FabricIndex,
t11FcSpAuServerProtocol AutonomousType,
-- Config parameters
t11FcSpAuStorageType StorageType,
t11FcSpAuSendRejNotifyEnable TruthValue,
t11FcSpAuRcvRejNotifyEnable TruthValue,
t11FcSpAuDefaultLifetime T11FcSpLifetimeLeft,
t11FcSpAuDefaultLifetimeUnits T11FcSpLifetimeLeftUnits,
t11FcSpAuRejectMaxRows Unsigned32,
-- Capabilities
t11FcSpAuDhChapHashFunctions T11FcSpHashFunctions,
t11FcSpAuDhChapDhGroups T11FcSpDhGroups,
t11FcSpAuFcapHashFunctions T11FcSpHashFunctions,
t11FcSpAuFcapCertsSignFunctions T11FcSpSignFunctions,
t11FcSpAuFcapDhGroups T11FcSpDhGroups,
t11FcSpAuFcpapHashFunctions T11FcSpHashFunctions,
t11FcSpAuFcpapDhGroups T11FcSpDhGroups
}
t11FcSpAuEntityName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name used to identify the FC-SP entity.
For entities that are Fibre Channel Switches, this value
corresponds to the Switch's value of fcmSwitchWWN. For
entities other than Fibre Channel Switches, this value
corresponds to the value of fcmInstanceWwn for the
corresponding Fibre Channel management instance."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.3.
- fcmInstanceWwn & fcmSwitchWWN,
'Fibre Channel Management MIB', RFC 4044, May 2005."
::= { t11FcSpAuEntityEntry 1 }
t11FcSpAuFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a
particular Fabric to which the entity is attached."
::= { t11FcSpAuEntityEntry 2 }
t11FcSpAuServerProtocol OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol, if any, used by the entity to communicate
with a third party (i.e., an External Server) as part of
the process by which it verifies DH-CHAP responses. For
example, if the entity is using an external RADIUS server
to verify DH-CHAP responses, then this object will have
the value t11FcSpAuServerProtocolRadius.
The value, zeroDotZero, is used to indicate that no
protocol is being used to communicate with a third
party to verify DH-CHAP responses.
When no protocol is being used, or if the third party is
unreachable via the specified protocol, then locally
configured information (if any) may be used instead."
::= { t11FcSpAuEntityEntry 3 }
t11FcSpAuStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the memory realization of
configuration information related to an FC-SP
Entity on a particular Fabric: specifically, for
MIB objects in the row containing this object.
Even if an instance of this object has the value
'permanent(4)', none of the information in the
corresponding row of this table needs to be writable."
::= { t11FcSpAuEntityEntry 4 }
t11FcSpAuSendRejNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether or not the entity should issue
t11FcSpAuRejectSentNotify notifications when sending
AUTH_Reject/SW_RJT/LS_RJT to reject an AUTH message.
If the value of the object is 'true', then this type of
notification is generated. If the value is 'false',
this type of notification is not generated."
DEFVAL { false }
::= { t11FcSpAuEntityEntry 5 }
t11FcSpAuRcvRejNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether or not the entity should issue
t11FcSpAuRejectReceivedNotify notifications on the receipt
of AUTH_Reject/SW_RJT/LS_RJT messages.
If the value of the object is 'true', then this type of
notification is generated. If the value is 'false',
this type of notification is not generated."
DEFVAL { false }
::= { t11FcSpAuEntityEntry 6 }
t11FcSpAuDefaultLifetime OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeft
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it specifies the
default value of a lifetime, specified in units given by
the corresponding instance of t11FcSpAuDefaultLifetimeUnits.
This default lifetime is to be used for any Security
Association that has no explicitly specified value for its
lifetime.
An SA's lifetime is either the time interval or the number
of passed bytes, after which the SA has to be terminated and
(if necessary) replaced with a new SA.
If this object is zero, then there is no default value for
lifetime."
DEFVAL { 28800 } -- 8 hours (in units of seconds)
::= { t11FcSpAuEntityEntry 7 }okay so we're picking right back up with the default lifetime units 🎀 this one tells you what the unit is for the default lifetime we just looked at, and the default is seconds 💅
t11FcSpAuDefaultLifetimeUnits OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeftUnits
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The units in which the value of the corresponding
instance of t11FcSpAuDefaultLifetime specifies a
default lifetime for a Security Association that has
no explicitly-specified value for its lifetime."
DEFVAL { seconds }
::= { t11FcSpAuEntityEntry 8 }next up is the reject max rows object 🥹 it caps how many rows the t11FcSpAuRejectTable can hold for each entity on each Fabric. once the table is full, the oldest row gets tossed to make room for the newest rejection, which is so iconic of a little rotating diary 📓🌸 it also says the table can have fewer rows than the max in weird situations like after an agent restart, and if an implementation doesn't support that table at all, this object is always zero ✨
t11FcSpAuRejectMaxRows OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of rows in the t11FcSpAuRejectTable for
this entity on this Fabric. If and when an AUTH message is
rejected, and the t11FcSpAuRejectTable already contains this
maximum number of rows for the specific entity and Fabric,
the row containing the oldest information is discarded and
replaced by a row containing information about the new
rejection.
There will be less than this maximum number of rows in
the t11FcSpAuRejectTable in exceptional circumstances,
e.g., after an agent restart.
In an implementation that does not support the
t11FcSpAuRejectTable, this object will always be zero."
::= { t11FcSpAuEntityEntry 9 }Now the DH-CHAP capability objects 🦋 These are read-only lists of what the entity supports. The hash functions and DH groups use the T11FcSpHashFunctions and T11FcSpDhGroups types.
t11FcSpAuDhChapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when using
the DH-CHAP algorithm."
::= { t11FcSpAuEntityEntry 10 }
t11FcSpAuDhChapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
DH-CHAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 11 }Next is the FCAP set 🌈 these two objects have REFERENCE clauses pointing at FC-SP, so I kept those citations exactly as written, down to the section and table numbers.
t11FcSpAuFcapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when
specified as Protocol Parameters in the AUTH_Negotiate
message for FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.5.2.1 and table 28."
::= { t11FcSpAuEntityEntry 12 }
t11FcSpAuFcapCertsSignFunctions OBJECT-TYPE
SYNTAX T11FcSpSignFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signature functions used within certificates that
the entity supports when using FCAP in FC-SP."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.5.4.2 and tables 38 & 39."
::= { t11FcSpAuEntityEntry 13 }
t11FcSpAuFcapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
FCAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 14 }And the FCPAP pair 💜 same deal, read-only capability lists.
t11FcSpAuFcpapHashFunctions OBJECT-TYPE
SYNTAX T11FcSpHashFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash functions that the entity supports when using
the FCPAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 15 }
t11FcSpAuFcpapDhGroups OBJECT-TYPE
SYNTAX T11FcSpDhGroups
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DH Groups that the entity supports when using the
FCPAP algorithm in FC-SP."
::= { t11FcSpAuEntityEntry 16 }Now we're moving into the mapping of authentication entities onto interfaces and statistics 🧚 This is where the stats live. Each entity can run on one or more interfaces, but only one entity per interface, and there's a row for every interface to every Fabric that an entity runs on.
--
-- The Mapping of Authentication Entities onto Interfaces
-- and Statistics
--
t11FcSpAuIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each FC-SP Authentication entity can operate on one or more
interfaces, but at most one of them can operate on each
interface. A row in this table exists for each interface
to each Fabric on which each Authentication entity operates.
The objects within this table contain statistics information
related to FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBObjects 2 }
t11FcSpAuIfStatEntry OBJECT-TYPE
SYNTAX T11FcSpAuIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of Authentication Protocols statistics for an FC-SP
Authentication entity (identified by t11FcSpAuEntityName) on
one of its interfaces to a particular Fabric, which is
managed within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuIfStatInterfaceIndex,
t11FcSpAuIfStatFabricIndex }
::= { t11FcSpAuIfStatTable 1 }
T11FcSpAuIfStatEntry ::= SEQUENCE {
t11FcSpAuIfStatInterfaceIndex InterfaceIndex,
t11FcSpAuIfStatFabricIndex T11FabricIndex,
t11FcSpAuIfStatTimeouts Counter32,
t11FcSpAuIfStatInAcceptedMsgs Counter32,
t11FcSpAuIfStatInLsSwRejectedMsgs Counter32,
t11FcSpAuIfStatInAuthRejectedMsgs Counter32,
t11FcSpAuIfStatOutAcceptedMsgs Counter32,
t11FcSpAuIfStatOutLsSwRejectedMsgs Counter32,
t11FcSpAuIfStatOutAuthRejectedMsgs Counter32
}
t11FcSpAuIfStatInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the FC-SP Authentication entity
operates and for which the statistics are collected."
::= { t11FcSpAuIfStatEntry 1 }
t11FcSpAuIfStatFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value identifying the particular Fabric for
which the statistics are collected."
::= { t11FcSpAuIfStatEntry 2 }Now the counters 📊 I'm obsessed with how each one is its own little bucket. There's one for timeouts, then a pile of accepted, LS/SW-rejected, and AUTH-rejected counts, in both directions, in and out 🫶 Every one is a Counter32 with the same note about discontinuities, so I kept that wording identical.
t11FcSpAuIfStatTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, for which no response was received
within a timeout period.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.11."
::= { t11FcSpAuIfStatEntry 3 }
t11FcSpAuIfStatInAcceptedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received and accepted by the particular entity on the
particular Fabric on the particular interface.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 4 }
t11FcSpAuIfStatInLsSwRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received by the particular entity on the particular Fabric
on the particular interface, and rejected by a lower-level
(SW_RJT or LS_RJT) reject.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 5 }
t11FcSpAuIfStatInAuthRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages
received by the particular entity on the particular Fabric
on the particular interface, and rejected by an AUTH_Reject
message.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 6 }
t11FcSpAuIfStatOutAcceptedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were accepted by the
neighboring entity, i.e., not rejected by an AUTH_Reject
message, nor by a lower-level (SW_RJT or LS_RJT) reject.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 7 }
t11FcSpAuIfStatOutLsSwRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were rejected by a lower-level
(SW_RJT or LS_RJT) reject.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 8 }
t11FcSpAuIfStatOutAuthRejectedMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Authentication Protocol messages sent
by the particular entity on the particular Fabric on the
particular interface, which were rejected by an
AUTH_Reject message.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.1."
::= { t11FcSpAuIfStatEntry 9 }Last bit for this part ✨ we're now at the header for the rejected-transactions stuff, so the next part is where the recently rejected Authentication Protocol transactions finally show up 👑
--
-- Information about Authentication Protocol Transactions
-- which were recently rejected
--okay so this is the reject table, and it is ✨ the drama corner ✨ 💅
It holds info on FC-SP Authentication Protocol transactions that got rejected recently, either with an AUTH_Reject or with an SW_RJT/LS_RJT 🙈
t11FcSpAuRejectTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpAuRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of volatile information about FC-SP Authentication
Protocol transactions that were recently rejected with
an AUTH_Reject message, or with an SW_RJT/LS_RJT.
The maximum number of rows in this table for a specific
entity on a specific Fabric is given by the value of the
corresponding instance of t11FcSpAuRejectMaxRows.
The syntax of t11FcSpAuRejTimestamp is TimeStamp, and thus
its value rolls over to zero after approximately 497 days.
To avoid any confusion due to such a rollover, rows should
be deleted from this table before they are 497 days old.
This table will be empty if no AUTH_Reject messages,
nor any SW_RJT/LS_RJT's rejecting an AUTH message,
have been sent or received since the last
re-initialization of the agent."
::= { t11FcSpAuMIBObjects 3 }
t11FcSpAuRejectEntry OBJECT-TYPE
SYNTAX T11FcSpAuRejectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about one AUTH message (either an
AUTH_ELS or an AUTH_ILS) that was rejected with an
AUTH_Reject, SW_RJT or LS_RJT message, sent/received by
the entity identified by values of fcmInstanceIndex and
t11FcSpAuEntityName, on an interface to a particular
Fabric."
INDEX { fcmInstanceIndex, t11FcSpAuEntityName,
t11FcSpAuRejInterfaceIndex, t11FcSpAuRejFabricIndex,
t11FcSpAuRejTimestamp }
::= { t11FcSpAuRejectTable 1 }
T11FcSpAuRejectEntry ::= SEQUENCE {
t11FcSpAuRejInterfaceIndex InterfaceIndex,
t11FcSpAuRejFabricIndex T11FabricIndex,
t11FcSpAuRejTimestamp TimeStamp,
t11FcSpAuRejDirection INTEGER,
t11FcSpAuRejType INTEGER,
t11FcSpAuRejAuthMsgString OCTET STRING,
t11FcSpAuRejReasonCode T11FcSpAuthRejectReasonCode,
t11FcSpAuRejReasonCodeExp T11FcSpAuthRejReasonCodeExp
}
t11FcSpAuRejInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the rejected AUTH message was
sent or received."
::= { t11FcSpAuRejectEntry 1 }
t11FcSpAuRejFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value identifying the particular Fabric on
which the rejected AUTH message was sent or received."
::= { t11FcSpAuRejectEntry 2 }
t11FcSpAuRejTimestamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time at which the AUTH message was rejected. If two
rows have the same value of this object for the same
entity on the same interface and Fabric, the value of
this object for the later one is incremented by one."
::= { t11FcSpAuRejectEntry 3 }
t11FcSpAuRejDirection OBJECT-TYPE
SYNTAX INTEGER { sent(1), received(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the rejection was sent or
received by the identified entity.
The value 'sent(1)' corresponds to a notification of
type t11FcSpAuRejectSentNotify; the value 'received(2)'
corresponds to t11FcSpAuRejectReceivedNotify."
::= { t11FcSpAuRejectEntry 4 }
t11FcSpAuRejType OBJECT-TYPE
SYNTAX INTEGER {
authReject(1),
swRjt(2),
lsRjt(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the rejection was an
AUTH_Reject, an SW_RJT or an LS_RJT."
::= { t11FcSpAuRejectEntry 5 }
t11FcSpAuRejAuthMsgString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the AUTH message that was
rejected, formatted as an octet string (in network
byte order) containing the content of the message.
If the binary content is unavailable, then the
length is zero. Otherwise, the first octet of the
message identifies the type of message:
'90'h - an AUTH_ELS, see Table 6 in FC-SP,
'40'h - an AUTH_ILS, see Table 3 in FC-SP, or
'41'h - an B_AUTH_ILS, see Table 5 in FC-SP.
and the remainder of the message may be truncated."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Tables 3, 5 and 6."
::= { t11FcSpAuRejectEntry 6 }
t11FcSpAuRejReasonCode OBJECT-TYPE
SYNTAX T11FcSpAuthRejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code with which this AUTH message was
rejected."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
::= { t11FcSpAuRejectEntry 7 }
t11FcSpAuRejReasonCodeExp OBJECT-TYPE
SYNTAX T11FcSpAuthRejReasonCodeExp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code explanation with which this AUTH
message was rejected."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 17, 48, 52."
::= { t11FcSpAuRejectEntry 8 }okay now the notifications 🔔 these are the ones that actually ping the switch's people when something gets rejected 🫶
--
-- Notifications
--
t11FcSpAuRejectSentNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn,
t11FcSpAuRejAuthMsgString,
t11FcSpAuRejType,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
STATUS current
DESCRIPTION
"This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has sent a reject
message of the type indicated by t11FcSpAuRejType in
response to an AUTH message.
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString. The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
::= { t11FcSpAuMIBNotifications 1 }
t11FcSpAuRejectReceivedNotify NOTIFICATION-TYPE
OBJECTS { t11FamLocalSwitchWwn,
t11FcSpAuRejAuthMsgString,
t11FcSpAuRejType,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
STATUS current
DESCRIPTION
"This notification indicates that a Switch (identified
by the value of t11FamLocalSwitchWwn) has received a
reject message of the type indicated by t11FcSpAuRejType
in response to an AUTH message.
The content of the rejected AUTH message is given by the
value of t11FcSpAuRejAuthMsgString. The values of the
Reason Code and Reason Code Explanation in the
AUTH_Reject/SW_RJT/LS_RJT are indicated by the values of
t11FcSpAuRejReasonCode and t11FcSpAuRejReasonCodeExp."
::= { t11FcSpAuMIBNotifications 2 }and now conformance 🎀 this is the part that says what an implementation has to have to count as compliant, so it's giving rules 👑
--
-- Conformance
--
t11FcSpAuMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 1 }
t11FcSpAuMIBGroups
OBJECT IDENTIFIER ::= { t11FcSpAuMIBConformance 2 }
t11FcSpAuMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
implement one or more of the Authentication Protocols
defined in FC-SP."
MODULE -- this module
MANDATORY-GROUPS { t11FcSpAuGeneralGroup,
t11FcSpAuRejectedGroup,
t11FcSpAuNotificationGroup }
GROUP t11FcSpAuIfStatsGroup
DESCRIPTION
"These counters, of particular FC-SP messages and
events, are mandatory only for those systems that
count such messages/events."
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpAuStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuSendRejNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuRcvRejNotifyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuDefaultLifetime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuDefaultLifetimeUnits
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpAuRejectMaxRows
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcSpAuMIBCompliances 1 }
-- Units of Conformance
t11FcSpAuGeneralGroup OBJECT-GROUP
OBJECTS { t11FcSpAuServerProtocol,
t11FcSpAuStorageType,
t11FcSpAuSendRejNotifyEnable,
t11FcSpAuRcvRejNotifyEnable,
t11FcSpAuDefaultLifetime,
t11FcSpAuDefaultLifetimeUnits,
t11FcSpAuRejectMaxRows,
t11FcSpAuDhChapHashFunctions,
t11FcSpAuDhChapDhGroups,
t11FcSpAuFcapHashFunctions,
t11FcSpAuFcapCertsSignFunctions,
t11FcSpAuFcapDhGroups,
t11FcSpAuFcpapHashFunctions,
t11FcSpAuFcpapDhGroups,
t11FcSpAuIfStatTimeouts }
STATUS current
DESCRIPTION
"A collection of objects for the capabilities and
configuration parameters of FC-SP's Authentication
Protocols. The inclusion of t11FcSpAuIfStatTimeouts
in this group provides information on mappings of
Authentication entities onto interfaces."
::= { t11FcSpAuMIBGroups 1 }
t11FcSpAuIfStatsGroup OBJECT-GROUP
OBJECTS { t11FcSpAuIfStatInAcceptedMsgs,
t11FcSpAuIfStatInLsSwRejectedMsgs,
t11FcSpAuIfStatInAuthRejectedMsgs,
t11FcSpAuIfStatOutAcceptedMsgs,
t11FcSpAuIfStatOutLsSwRejectedMsgs,
t11FcSpAuIfStatOutAuthRejectedMsgs }
STATUS current
DESCRIPTION
"A collection of objects for monitoring the
operations of FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBGroups 2 }
t11FcSpAuRejectedGroup OBJECT-GROUP
OBJECTS { t11FcSpAuRejDirection,
t11FcSpAuRejType,
t11FcSpAuRejAuthMsgString,
t11FcSpAuRejReasonCode,
t11FcSpAuRejReasonCodeExp }
STATUS current
DESCRIPTION
"A collection of objects holding information concerning
FC-SP Authentication Protocol transactions that were
recently rejected with an AUTH_Reject, with an SW_RJT,
or with an LS_RJT."
::= { t11FcSpAuMIBGroups 3 }t11FcSpAuNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpAuRejectSentNotify,
t11FcSpAuRejectReceivedNotify }
STATUS current
DESCRIPTION
"A collection of notifications for use in the management
of FC-SP's Authentication Protocols."
::= { t11FcSpAuMIBGroups 4 }
END6.3. The T11-FC-SP-ZONING-MIB Module ✨
okay bestie, this is where we switch over to the zoning side of FC-SP 🧚 it's the same vibe as the auth MIB, just pointed at Zone Servers instead 💅
--*******************************************************************
-- FC-SP Zoning
--
T11-FC-SP-ZONING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, mib-2,
Counter32
FROM SNMPv2-SMI -- [RFC2578]
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
ifIndex FROM IF-MIB -- [RFC2863]
t11ZsServerEntry,
t11ZsStatsEntry,
t11ZsNotifyControlEntry,
t11ZsFabricIndex FROM T11-FC-ZONE-SERVER-MIB -- [RFC4936]
T11FcSpPolicyHashValue,
T11FcSpPolicyHashFormat,
T11FcSpHashCalculationStatus
FROM T11-FC-SP-TC-MIB;
t11FcSpZoningMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the extensions to the
T11-FC-ZONE-SERVER-MIB module that are necessary for the
management of Fibre Channel's FC-SP Zoning Servers, as
defined in the FC-SP specification.
The persistence of values written to these MIB objects is
the same as the persistence of the objects they extend,
i.e., it is given by the value of the relevant instance of
t11ZsServerDatabaseStorageType (defined in the
T11-FC-ZONE-SERVER-MIB module).
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 177 }
t11FcSpZsMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 0 }
t11FcSpZsMIBObjects OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 1 }
t11FcSpZsMIBConformance OBJECT IDENTIFIER ::= { t11FcSpZoningMIB 2 }
t11FcSpZsConfiguration OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 1 }
t11FcSpZsStatistics OBJECT IDENTIFIER ::= { t11FcSpZsMIBObjects 2 }
--
-- Augmenting the table of Zone Servers
--
t11FcSpZsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which provides FC-SP-specific information about
the Zone Servers on each Fabric in one or more Switches."
::= { t11FcSpZsConfiguration 1 }
t11FcSpZsServerEntry OBJECT-TYPE
SYNTAX T11FcSpZsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information relevant to FC-SP
for a particular Zone Server for a particular Fabric
on a particular Switch. The Fabric and Switch are
identified in the same manner as in t11ZsServerEntry."
AUGMENTS { t11ZsServerEntry }
::= { t11FcSpZsServerTable 1 }
T11FcSpZsServerEntry ::= SEQUENCE {
t11FcSpZsServerCapabilityObject BITS,
t11FcSpZsServerEnabled TruthValue,
t11FcSpZoneSetHashStatus T11FcSpHashCalculationStatus,
t11FcSpActiveZoneSetHashType T11FcSpPolicyHashFormat,
t11FcSpActiveZoneSetHash T11FcSpPolicyHashValue,
t11FcSpZoneSetDatabaseHashType T11FcSpPolicyHashFormat,
t11FcSpZoneSetDatabaseHash T11FcSpPolicyHashValue
}
t11FcSpZsServerCapabilityObject OBJECT-TYPE
SYNTAX BITS {
fcSpZoning(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Capabilities of the Zone Server for the particular Fabric
on the particular Switch, with respect to FC-SP Zoning:
fcSpZoning -- set to 1 to indicate the Switch is
capable of supporting FC-SP Zoning.
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 184."
::= { t11FcSpZsServerEntry 1 }
t11FcSpZsServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the Zone Server for the
particular Fabric on the particular Switch, is operating in
FC-SP Zoning mode."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 185."
::= { t11FcSpZsServerEntry 2 }
t11FcSpZoneSetHashStatus OBJECT-TYPE
SYNTAX T11FcSpHashCalculationStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, the value of this object is either:
correct -- the corresponding instances of both
t11FcSpActiveZoneSetHash and
t11FcSpZoneSetDatabaseHash contain
the correct hash values; or
stale -- the corresponding instances of
t11FcSpActiveZoneSetHash and
t11FcSpZoneSetDatabaseHash contain
stale (possibly incorrect) values;
Writing a value of 'calculate' is a request to re-calculate
and update the values of the corresponding instances of both
t11FcSpActiveZoneSetHash and t11FcSpZoneSetDatabaseHash.
Writing a value of 'correct' or 'stale' to this object
is an error (e.g., 'wrongValue').
When the Active Zone Set and/or the Zone Set Database are
updated, it is common that multiple changes need to be made
at the same time. In such circumstances, the use of this
object allows the hash values to be updated only once after
all changes, rather than repeatedly/after each individual
change.
If and when the corresponding instance of
t11ZsServerDatabaseStorageType has the value 'permanent(4)',
then if write access is supported to any instance of a
read-write object in any row of any table governed by the
'permanent' value of t11ZsServerDatabaseStorageType, then
write access to the corresponding instance of this object
must also be supported."
REFERENCE
"t11ZsServerDatabaseStorageType in
'Fibre Channel Zone Server MIB', RFC 4936, August 2007."
DEFVAL { stale }
::= { t11FcSpZsServerEntry 3 }
t11FcSpActiveZoneSetHashType OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format used for the hash value contained in the
corresponding instance of t11FcSpActiveZoneSetHash."
::= { t11FcSpZsServerEntry 4 }
t11FcSpActiveZoneSetHash OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the hash for the current Active Zone Set.
The format of this value is given by the corresponding
instance of t11FcSpActiveZoneSetHashType."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 187."
::= { t11FcSpZsServerEntry 5 }
t11FcSpZoneSetDatabaseHashType OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format used for the hash value contained in the
corresponding instance of t11FcSpZoneSetDatabaseHash."
::= { t11FcSpZsServerEntry 6 }
t11FcSpZoneSetDatabaseHash OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the hash for the current Zone Set Database.
The format of this value is given by the corresponding
instance of t11FcSpZoneSetDatabaseHashType."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Table 187."
::= { t11FcSpZsServerEntry 7 }
--
-- Additional Statistics for FC-SP Zoning
--
t11FcSpZsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics specific to FC-SP that are
maintained by Zone Servers."
::= { t11FcSpZsStatistics 1 }
t11FcSpZsStatsEntry OBJECT-TYPE
SYNTAX T11FcSpZsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of statistics specific to FC-SP for a particular
Zone Server for a particular Fabric on a particular Switch.
The Fabric and Switch are identified in the same manner as
in t11ZsStatsEntry."
AUGMENTS { t11ZsStatsEntry }
::= { t11FcSpZsStatsTable 1 }
T11FcSpZsStatsEntry ::= SEQUENCE {
t11FcSpZsSPCMITrequestsSent Counter32,
t11FcSpZsSPCMITrequestsAccepted Counter32,
t11FcSpZsSPCMITrequestsRejected Counter32,
t11FcSpZsZcpRequestsSent Counter32,
t11FcSpZsZcpRequestsAccepted Counter32,
t11FcSpZsZcpRequestsRejected Counter32,
t11FcSpZsZirRequestsAccepted Counter32,
t11FcSpZsZirRequestsRejected Counter32
}
t11FcSpZsSPCMITrequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
requests sent by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 1 }
t11FcSpZsSPCMITrequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
requests received and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 2 }
t11FcSpZsSPCMITrequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SP Commit Zone Changes (SPCMIT) operation
requests received but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 3 }okay so the ZCP and ZIR counters are next, and they're giving packet-counting obsession 📊💅 each one just tallies how many requests went out or came in and got accepted or rejected, and they only reset when the counter wraps or sysUpTime hits 0 🦋
t11FcSpZsZcpRequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests sent
by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 4 }
t11FcSpZsZcpRequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests received
and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 5 }
t11FcSpZsZcpRequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Check Protocol (ZCP) requests received
but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 6 }
t11FcSpZsZirRequestsAccepted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Information Request (ZIR) requests
received and accepted by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 7 }
t11FcSpZsZirRequestsRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Zoning Information Request (ZIR) requests
received but rejected by the Zone Server.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
::= { t11FcSpZsStatsEntry 8 }
--
-- Enable/Disable for Notifications
--
t11FcSpZsNotifyControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpZsNotifyControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control information for notifications
generated due to Zone Server events related to
FC-SP Zoning."
::= { t11FcSpZsConfiguration 2 }
t11FcSpZsNotifyControlEntry OBJECT-TYPE
SYNTAX T11FcSpZsNotifyControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry is an augmentation of the notification control
information for a Zone Server for a particular Fabric on a
particular Switch. The Fabric and Switch are identified in
the same manner as in t11ZsNotifyControlEntry."
AUGMENTS { t11ZsNotifyControlEntry }
::= { t11FcSpZsNotifyControlTable 1 }
T11FcSpZsNotifyControlEntry ::= SEQUENCE {
t11FcSpZsNotifyJoinSuccessEnable TruthValue,
t11FcSpZsNotifyJoinFailureEnable TruthValue
}
t11FcSpZsNotifyJoinSuccessEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether
t11FcSpZsFabricJoinFailureNotify notifications should be
generated by the Zone Server for this Fabric."
::= { t11FcSpZsNotifyControlEntry 1 }
t11FcSpZsNotifyJoinFailureEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether
t11FcSpZsFabricJoinSuccessNotify notifications should be
generated by the Zone Server for this Fabric."
::= { t11FcSpZsNotifyControlEntry 2 }
--
-- Notifications
--
t11FcSpZsFabricJoinSuccessNotify NOTIFICATION-TYPE
OBJECTS { ifIndex, t11ZsFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that a Switch that is part
of one Fabric (indicated by the value of t11ZsFabricIndex)
has successfully joined (on the interface indicated by the
value of ifIndex) with a Switch that is part of another
Fabric.
If multiple Virtual Fabrics are configured on an interface,
and all are successfully joined at the same time, and if
the agent so chooses, then it can generate just one
notification in which t11ZsFabricIndex has the value 4096."
::= { t11FcSpZsMIBNotifications 1 }
t11FcSpZsFabricJoinFailureNotify NOTIFICATION-TYPE
OBJECTS { ifIndex, t11ZsFabricIndex }
STATUS current
DESCRIPTION
"This notification indicates that an E_Port on the local
Switch has entered the Isolated state because a join
between two Fabrics failed. The failure occurred on the
local Fabric indicated by the value of t11ZsFabricIndex,
on the interface indicated by the value of ifIndex.
If multiple Virtual Fabrics are configured on an interface,
and all have a failure to join at the same time, and if the
agent so chooses, then it can generate just one notification
in which t11ZsFabricIndex has the value 4096."
::= { t11FcSpZsMIBNotifications 2 }
--
-- Conformance
--
t11FcSpZsMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 1 }
t11FcSpZsMIBGroups OBJECT IDENTIFIER ::= { t11FcSpZsMIBConformance 2 }
t11FcSpZsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
implement the extensions specified in FC-SP for
Fibre Channel's Zone Server."
MODULE -- this module
MANDATORY-GROUPS { t11FcSpZsObjectsGroup,
t11FcSpZsNotificationControlGroup,
t11FcSpZsNotificationGroup }
GROUP t11FcSpZsStatisticsGroup
DESCRIPTION
"These counters, containing Zone Server statistics,
are mandatory only for those systems that count
such events."
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpZsServerEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZoneSetHashStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZsNotifyJoinSuccessEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpZsNotifyJoinFailureEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcSpZsMIBCompliances 1 }
-- Units of Conformance
t11FcSpZsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpZsServerCapabilityObject,
t11FcSpZsServerEnabled,
t11FcSpZoneSetHashStatus,
t11FcSpActiveZoneSetHashType,
t11FcSpActiveZoneSetHash,
t11FcSpZoneSetDatabaseHashType,
t11FcSpZoneSetDatabaseHash
}
STATUS current
DESCRIPTION
"A collection of objects for Zone configuration
information of a Zone Server capable of
operating in FC-SP Zoning mode."
::= { t11FcSpZsMIBGroups 1 }
t11FcSpZsNotificationControlGroup OBJECT-GROUP
OBJECTS { t11FcSpZsNotifyJoinSuccessEnable,
t11FcSpZsNotifyJoinFailureEnable
}
STATUS current
DESCRIPTION
"A collection of notification control objects for
monitoring Zone Server failures specific to FC-SP."
::= { t11FcSpZsMIBGroups 2 }
t11FcSpZsStatisticsGroup OBJECT-GROUP
OBJECTS { t11FcSpZsSPCMITrequestsSent,
t11FcSpZsSPCMITrequestsAccepted,
t11FcSpZsSPCMITrequestsRejected,
t11FcSpZsZcpRequestsSent,
t11FcSpZsZcpRequestsAccepted,
t11FcSpZsZcpRequestsRejected,
t11FcSpZsZirRequestsAccepted,
t11FcSpZsZirRequestsRejected
}
STATUS current
DESCRIPTION
"A collection of objects for collecting Zone Server
statistics which are specific to FC-SP."
::= { t11FcSpZsMIBGroups 3 }
t11FcSpZsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpZsFabricJoinSuccessNotify,
t11FcSpZsFabricJoinFailureNotify
}
STATUS current
DESCRIPTION
"A collection of notification(s) for monitoring
Zone Server events that are specific to FC-SP."
::= { t11FcSpZsMIBGroups 4 }
END6.4. The T11-FC-SP-POLICY-MIB Module ✨
okay bestie, this is where the policy MIB starts 🎀 it opens with a big divider, then the module header, then all the imports it pulls in from other MIBs and TC modules 🧚
--*******************************************************************
-- FC-SP Policy
--
T11-FC-SP-POLICY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
Counter32, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
RowStatus, StorageType, TimeStamp,
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
InetAddress, InetPortNumber,
InetAddressType FROM INET-ADDRESS-MIB -- [RFC4001]
fcmInstanceIndex,
FcNameIdOrZero,
FcDomainIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
T11NsGs4RejectReasonCode
FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpAlphaNumName,
T11FcSpAlphaNumNameOrAbsent,
T11FcSpPolicyName,
T11FcSpPolicyNameType,
T11FcSpPolicyObjectType,
T11FcSpPolicyHashFormat,
T11FcSpPolicyHashValue,
T11FcSpHashCalculationStatus FROM T11-FC-SP-TC-MIB;okay the MIB module itself starts here 🎀 the top-level identity block is all the admin stuff: who wrote it, when, and the big DESCRIPTION that explains the five parts of the module ✨
t11FcSpPolicyMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage Fabric Policies as defined by Fibre
Channel's FC-SP specification.
FC-SP uses the term 'Policy Objects', sometimes abbreviated
to just 'Objects', to refer to containers used to hold the
data by which Fabric Policies are specified/stored. This
obviously has the potential to cause confusion between
'Policy Objects' and 'MIB objects'. The DESCRIPTIONs in
this MIB module attempt to avoid such confusion by the use
of different adjectives and capitalization, even though such
mechanisms are less effective when used in descriptors.
Some types of Policy Objects contain multiple items of
information, each of which are held in the same format
within the Policy Object. In such cases, FC-SP uses the
term 'Entry' to describe each instance of the common format.
For example, FC-SP defines an Attribute Policy Object as
containing one or more 'Attribute Entries'. Again, this MIB
module attempts to avoid confusion by the use of adjectives
and capitalization to distinguish an Entry within a Policy
Object from an entry within a MIB table.
A Fabric's database of Policy Objects consists of a set of
active Objects that are to be enforced by that Fabric, as
well as non-active Objects that are not enforced.
Operations defined (in FC-SP) for Policy Management are:
- Add/Get/Remove operations on individual non-active
Policy Objects,
- Activate/Deactivate operations on a Policy Summary
Object, and
- Get operations on the active Policy Summary Object
and/or on individual active Policy Objects.
This MIB module has five parts:
1) Active Policy Objects - read-only MIB objects
representing the set of active Policy Objects for
each Fabric,
2) Activate/Deactivate Operations
- a read-write MIB object to invoke an Activate
operation of the policies specified via a non-active
Policy Summary Object, and
- a read-write MIB object to invoke a Deactivate
operation.
3) Non-active Policy Objects
- read-create MIB objects to allow the creation of
non-active Policy Summary Objects (which reference
non-active Policy Objects), and
- read-create MIB objects representing non-active
Policy Objects.
4) Statistics
5) Control information and Notifications
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 178 }the DESCRIPTION is basically the module's whole tour guide 🦋 it sorts everything into five parts: active objects, activate/deactivate ops, non-active objects, stats, and control plus notifications 💅
t11FcSpPoMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 0 }
t11FcSpPoMIBObjects OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 1 }
t11FcSpPoMIBConformance OBJECT IDENTIFIER ::= { t11FcSpPolicyMIB 2 }
t11FcSpPoActive OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 1 }
t11FcSpPoOperations OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 2 }
t11FcSpPoNonActive OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 3 }
t11FcSpPoStatistics OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 4 }
t11FcSpPoControl OBJECT IDENTIFIER ::= { t11FcSpPoMIBObjects 5 }
--
-- Part 1 - Active Policy Objects
--
t11FcSpPoTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing top-level information about active
FC-SP policies on various Fabrics."
::= { t11FcSpPoActive 1 }
t11FcSpPoEntry OBJECT-TYPE
SYNTAX T11FcSpPoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about active FC-SP policies
for a particular Fabric, managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoTable 1 }
T11FcSpPoEntry ::= SEQUENCE {
t11FcSpPoFabricIndex T11FabricIndex,
t11FcSpPoPolicySummaryObjName T11FcSpAlphaNumName,
t11FcSpPoAdminFabricName FcNameIdOrZero,
t11FcSpPoActivatedTimeStamp TimeStamp
}
t11FcSpPoFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Fabric."
::= { t11FcSpPoEntry 1 }
t11FcSpPoPolicySummaryObjName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this Fabric's (active) Policy Summary Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
::= { t11FcSpPoEntry 2 }
t11FcSpPoAdminFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administratively-specified name for this Fabric, as
specified in the active Switch Membership List Object.
This value is meaningful only when Static Domain_IDs are
in use in a Fabric (see FC-SW-4). Static Domain_IDs are
administratively enabled by a setting of the Switch Flags
in each Switch Entry in the Switch Membership List Object.
If Static Domain_IDs are not in use, this value might be
'0000000000000000'h.
The t11FamEnable, t11FamFabricName, and
t11FamConfigDomainIdType objects defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module are also concerned with
the use of an administratively-specified name for a Fabric
and Static Domain_IDs. When FC-SP Policy is in use in a
Fabric, the values of t11FamEnable, t11FamFabricName, and
t11FamConfigDomainIdType must be read-only and reflect the
active Policy Objects. For example, the value of
t11FamFabricName must reflect the value of
t11FcSpPoAdminFabricName."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108.
- Fibre Channel - Switch Fabric-4 (FC-SW-4),
ANSI INCITS 418-2006, April 2006, section 7.1.
- Fibre Channel Fabric Address Manager MIB', RFC 4439,
March 2006."
::= { t11FcSpPoEntry 3 }
t11FcSpPoActivatedTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at which this Fabric's Policy
Summary Object was last activated, or zero if the same
Policy Summary Object has been active since the last
restart of the management system."
::= { t11FcSpPoEntry 4 }
--
-- The table of Policy Summary Objects
--
t11FcSpPoSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about active Policy Objects listed
within FC-SP Policy Summary Objects."
::= { t11FcSpPoActive 2 }
t11FcSpPoSummaryEntry OBJECT-TYPE
SYNTAX T11FcSpPoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one of the active
Policy Objects listed within the Policy Summary Object for
the Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified by
fcmInstanceIndex.
How many Policy Objects of a given type can be active at
any one time for a given Fabric depends on the type, as
specified in FC-SP. For some types, it is one per Fabric;
for other types, more than one can be active per Fabric.
In both of these cases, the absence of any entries in this
table for a particular type is equivalent to there being one
Policy Object of that type that is empty, e.g., a Switch
Membership List Object that identifies zero Switches."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSummaryPolicyNameType,
t11FcSpPoSummaryPolicyName }
::= { t11FcSpPoSummaryTable 1 }
T11FcSpPoSummaryEntry ::= SEQUENCE {
t11FcSpPoSummaryPolicyNameType T11FcSpPolicyNameType,
t11FcSpPoSummaryPolicyName T11FcSpPolicyName,
t11FcSpPoSummaryPolicyType T11FcSpPolicyObjectType,
t11FcSpPoSummaryHashFormat T11FcSpPolicyHashFormat,
t11FcSpPoSummaryHashValue T11FcSpPolicyHashValue
}
t11FcSpPoSummaryPolicyNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
alphaNumericName(7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoSummaryPolicyNameType and
t11FcSpPoSummaryPolicyName specify the name of the Policy
Object contained in the Policy Summary Object.
The type of name is 'nodeName' if the value of the
corresponding instance of t11FcSpPoSummaryPolicyType is
'switchConnectivity', or 'alphaNumericName' otherwise."
::= { t11FcSpPoSummaryEntry 1 }
t11FcSpPoSummaryPolicyName OBJECT-TYPE
SYNTAX T11FcSpPolicyName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoSummaryPolicyNameType and
t11FcSpPoSummaryPolicyName specify the name of the Policy
Object contained in the Policy Summary Object."
::= { t11FcSpPoSummaryEntry 2 }
t11FcSpPoSummaryPolicyType OBJECT-TYPE
SYNTAX T11FcSpPolicyObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 'Identifier' that specifies the type of this
Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 104."
::= { t11FcSpPoSummaryEntry 3 }and that's the Active Policy Objects part wrapped up 🌸 the summary table is where the policy names and types finally show up, so the next bit is gonna be iconic 🔥
okay bestie, the hash stuff comes first 💅✨
t11FcSpPoSummaryHashFormat OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format of this Policy Object's hash value as
contained in the corresponding instance of the
t11FcSpPoSummaryHashValue object."
::= { t11FcSpPoSummaryEntry 4 }
t11FcSpPoSummaryHashValue OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash value of this Policy Object, in the format
identified by the corresponding instance of the
t11FcSpPoSummaryHashFormat object."
::= { t11FcSpPoSummaryEntry 5 }next up: the Switch Membership stuff, and it's lowkey the main character of this whole section 🦋
--
-- Switch Entries in Active Switch Membership List Objects
--
t11FcSpPoSwMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Switch Entries in active Switch Membership List
Objects.
One Switch Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoActive 3 }
t11FcSpPoSwMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Switch Entry
within the active Switch Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSwMembSwitchNameType, t11FcSpPoSwMembSwitchName }
::= { t11FcSpPoSwMembTable 1 }
T11FcSpPoSwMembEntry ::= SEQUENCE {
t11FcSpPoSwMembSwitchNameType T11FcSpPolicyNameType,
t11FcSpPoSwMembSwitchName FcNameIdOrZero,
t11FcSpPoSwMembSwitchFlags BITS,
t11FcSpPoSwMembDomainID FcDomainIdOrZero,
t11FcSpPoSwMembPolicyDataRole INTEGER,
t11FcSpPoSwMembAuthBehaviour BITS,
t11FcSpPoSwMembAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoSwMembSwitchNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'nodeName' or
'restrictedNodeName', then the combination of
this object and t11FcSpPoSwMembSwitchName specify the
Switch Name of this Switch Entry.
The membership is restricted or unrestricted based on the
name type. Restricted membership means that the Switch is
not allowed to be part of the Fabric unless allowed by a
specific Switch Connectivity Object. Unrestricted
membership means that the Switch is allowed to be part of
the Fabric unless disallowed by a specific Switch
Connectivity Object.
The values of 'wildcard' and 'restrictedWildcard' provide
the means to specify whether to allow/deny membership for
Switches not explicitly named in the Switch Membership
List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 1 }
t11FcSpPoSwMembSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of t11FcSpPoSwMembSwitchNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoSwMembSwitchNameType
and this object specify the Switch Name of this Switch
Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 2 }
t11FcSpPoSwMembSwitchFlags OBJECT-TYPE
SYNTAX BITS {
staticDomainID(0),
insistentDomainID(1),
serialPortsAccess(2),
physicalPortsAccess(3),
managerRole(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Switch:
'staticDomainID' - if this bit is set, the Switch
uses the 'Static Domain_IDs behavior' (as defined in
FC-SW-4). This bit needs to have the same setting for all
Switches in a Fabric's Switch Membership List Object, or
else the Fabric will partition. If this bit is set, the
Domain_ID for the Switch is given by the corresponding
instance of t11FcSpPoSwMembDomainID.
'insistentDomainID' - if this bit is set, the
Switch uses the 'Insistent Domain_ID behavior' (see
t11FamConfigDomainId of T11-FC-FABRIC-ADDR-MGR-MIB), the
Domain_ID for the Switch is given by the corresponding
instance of t11FcSpPoSwMembDomainID.
'serialPortsAccess' - the Switch allows management
through serial ports when and only when this bit is set.
'physicalPortsAccess' - the Switch allows management
through the physical panel when and only when this bit
is set.
'managerRole' - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, Enhanced Stage Fabric Configuration (ESFC), Enhanced
Update Fabric Configuration (EUFC), ACA, SFC, or UFC
SW_ILSs) if and only if this bit is set.
Whenever a Fabric has Active Policy Objects, the value of
the t11FamConfigDomainIdType object defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
reflect the values of the 'staticDomainID' and
'insistentDomainID' bits of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 112.
- Fibre Channel - Switch Fabric-4 (FC-SW-4),
ANSI INCITS 418-2006, April 2006, section 7.1.
- t11FamConfigDomainIdType, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439."
::= { t11FcSpPoSwMembEntry 3 }
t11FcSpPoSwMembDomainID OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The specified Domain_ID value when either of the
'staticDomainID' or 'insistentDomainID' bits are set in
the corresponding instance of t11FcSpPoSwMembSwitchFlags.
Whenever a Fabric has Active Policy Objects, the value
of the t11FamConfigDomainId object defined in the
T11-FC-FABRIC-ADDR-MGR-MIB module must be read-only and
reflect the value of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and tables 111 and 112.
- t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439."
::= { t11FcSpPoSwMembEntry 4 }
t11FcSpPoSwMembPolicyDataRole OBJECT-TYPE
SYNTAX INTEGER {
client(1),
autonomous(2),
server(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the Switch in terms of which Policy data
it retains/maintains:
'client' - the Switch operates as a Client Switch.
A Client Switch maintains its own Switch Connectivity
Object and all Fabric-wide List Objects. If FC-SP
Zoning is used, a Client Switch maintains only the
subset of the Active Zone Set that it requires to
enforce the current Fabric Zoning configuration.
'autonomous' - the Switch operates as an Autonomous
Switch. An Autonomous Switch maintains its own Switch
Connectivity Object and all Fabric-wide List Objects.
This is the same as 'client' except that if FC-SP Zoning
is used, an Autonomous Switch maintains a complete copy
of the Fabric Zoning Database.
'server' - the Switch operates as a Server Switch.
A Server Switch maintains all Fabric-wide List Objects
and the Switch Connectivity Objects of each Switch in
the Fabric. If FC-SP Zoning is used, a Server Switch
maintains a complete copy of the Fabric Zoning Database."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 113."
::= { t11FcSpPoSwMembEntry 5 }
t11FcSpPoSwMembAuthBehaviour OBJECT-TYPE
SYNTAX BITS {
mustAuthenticate(0),
rejectIsFailure(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication behaviour of the Switch:
'mustAuthenticate' - if this bit is set, all connections
between this Switch and neighbor Switches must be
authenticated.
'rejectIsFailure' - if this bit is set, the rejection of
an AUTH_Negotiate message must be considered as an
authentication failure by this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 114."
::= { t11FcSpPoSwMembEntry 6 }
t11FcSpPoSwMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this Switch, or the zero-length string. The
zero-length string indicates that no Attribute Policy
Object is defined for this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoSwMembEntry 7 }
--
-- Node Entries in Active Node Membership List Objects
--
t11FcSpPoNoMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Node Entries in active Node Membership List
Objects.
One Node Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
::= { t11FcSpPoActive 4 }the Node Membership bits are next, bestie 🧚
Okay bestie, we're deep in the Node Entries era now 🧚 Each Node gets its own little row in the Membership List, and the rows are keyed by name, so it's basically a VIP guest list for the fabric 🎀
t11FcSpPoNoMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Node Entry
within the active Node Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNoMembNodeNameType, t11FcSpPoNoMembNodeName }
::= { t11FcSpPoNoMembTable 1 }
T11FcSpPoNoMembEntry ::= SEQUENCE {
t11FcSpPoNoMembNodeNameType T11FcSpPolicyNameType,
t11FcSpPoNoMembNodeName FcNameIdOrZero,
t11FcSpPoNoMembFlags BITS,
t11FcSpPoNoMembCtAccessIndex Unsigned32,
t11FcSpPoNoMembAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoNoMembNodeNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this Node Entry applies to Nodes not
explicitly named in the Node Membership List Object.
Otherwise, the combination of this object and
t11FcSpPoNoMembNodeName specify the name of this Node Entry
in the active Node Membership List Object. A Node is
identified by its Node Name or by one or more of its Port
Names.
Restricted membership means that a Node is not allowed to be
connected to the Fabric unless allowed by a specific Switch
Connectivity Object. Unrestricted membership means that a
Node is allowed to be connected to the Fabric unless
disallowed by a specific Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNoMembEntry 1 }
t11FcSpPoNoMembNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoNoMembNodeNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoNoMembNodeNameType
and this object specify the name of this Node Entry is the
active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNoMembEntry 2 }
t11FcSpPoNoMembFlags OBJECT-TYPE
SYNTAX BITS {
scsiEnclosureAccess(0),
authenticationRequired(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Node:
'scsiEnclosureAccess' - the Node is allowed to
control any Switch through SCSI Enclosure Services if this
bit is set. If a Switch does not support SCSI Enclosure
Services, this bit is ignored.
'authenticationRequired' - the Node is required to
authenticate itself to any Switch to which it is connected
if and only if this bit is set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 118."
::= { t11FcSpPoNoMembEntry 3 }
t11FcSpPoNoMembCtAccessIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is zero, then access by this
Node to Generic Services is not limited by a Common
Transport Access Specifier.
Otherwise, the limits are specified by the set of Common
Transport Access Descriptors contained in those rows of
the t11FcSpPoCtDescrTable for the same Fabric and for which
the value of t11FcSpPoCtDescrSpecifierIndex is the same as
the value of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.4.1 and tables 118/119/120/121."
::= { t11FcSpPoNoMembEntry 4 }
t11FcSpPoNoMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this Node, or the zero-length string. The
zero-length string indicates that no Attribute Policy
Object is defined for this Node."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNoMembEntry 5 }
--
--
-- Common Transport Access Descriptors
--
t11FcSpPoCtDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Common Transport Access Descriptors being used
within active Policy Objects.
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
An active Common Transport Access Specifier is represented
by all rows of this table that have the same values of
fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoCtDescrSpecifierIndex."
::= { t11FcSpPoActive 5 }
t11FcSpPoCtDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Common
Transport Access Descriptor of an active Common Transport
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoCtDescrSpecifierIndex, t11FcSpPoCtDescrIndex }
::= { t11FcSpPoCtDescrTable 1 }
T11FcSpPoCtDescrEntry ::= SEQUENCE {
t11FcSpPoCtDescrSpecifierIndex Unsigned32,
t11FcSpPoCtDescrIndex Unsigned32,
t11FcSpPoCtDescrFlags BITS,
t11FcSpPoCtDescrGsType OCTET STRING,
t11FcSpPoCtDescrGsSubType OCTET STRING
}
t11FcSpPoCtDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Specifier within a Fabric."
::= { t11FcSpPoCtDescrEntry 1 }
t11FcSpPoCtDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Descriptor within a Common Transport
Access Specifier."
::= { t11FcSpPoCtDescrEntry 2 }
t11FcSpPoCtDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
gsTypeWildcard(1),
gsSubTypeWildcard(2),
readOnly(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Common Transport Access Descriptor:
- allow -- access to the specified Generic Service and
Server is allowed if this bit is set, and is to be denied
if this bit is not set.
- gsTypeWildcard -- if this bit is set, the Generic Service
to be allowed/denied is specified by the value of
t11FcSpPoCtDescrGsType. If this bit is set, then the
gsSubTypeWildcard bit must not be set.
- gsSubTypeWildcard -- if this bit is set, the Generic
Service to be allowed/denied is specified by the value of
t11FcSpPoCtDescrGsSubType. If this bit is set, then the
gsTypeWildcard bit must not be set.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
::= { t11FcSpPoCtDescrEntry 3 }
t11FcSpPoCtDescrGsType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GS_Type of the Generic Service (e.g., the FC-GS-5
Management Service) that is subject to access control.
This value is ignored if the gsTypeWildcard bit is not set
in the corresponding value of t11FcSpPoCtDescrFlags."
REFERENCE
"- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, section 4.3.2.4."
::= { t11FcSpPoCtDescrEntry 4 }
t11FcSpPoCtDescrGsSubType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GS_Subtype of the Generic Server (e.g., the Fabric Zone
Server) that is subject to access control. This value is
ignored if the gsSubTypeWildcard bit is not set in the
corresponding value of t11FcSpPoCtDescrFlags."
REFERENCE
"- Fibre Channel - Generic Services-5 (FC-GS-5),
ANSI INCITS 427-2006, section 4.3.2.5."
::= { t11FcSpPoCtDescrEntry 5 }
--
--
-- Switches/Nodes in Active Switch Connectivity Objects
--
t11FcSpPoSwConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of active Switch Connectivity Objects.
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1, tables 123/124."
::= { t11FcSpPoActive 6 }
t11FcSpPoSwConnEntry OBJECT-TYPE
SYNTAX T11FcSpPoSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the name of either a Switch or a Node
with which any port of a particular Switch, or a particular
port of that Switch, is allowed or not allowed to be
connected.
The particular Switch is on the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoSwConnSwitchName, t11FcSpPoSwConnAllowedType,
t11FcSpPoSwConnPortNameOrAll,
t11FcSpPoSwConnAllowedIndex }
::= { t11FcSpPoSwConnTable 1 }okay the switch connectivity stuff is wrapping up and then we get into IP management, which is giving main character energy 💅✨
T11FcSpPoSwConnEntry ::= SEQUENCE {
t11FcSpPoSwConnSwitchName FcNameIdOrZero,
t11FcSpPoSwConnAllowedType INTEGER,
t11FcSpPoSwConnPortNameOrAll FcNameIdOrZero,
t11FcSpPoSwConnAllowedIndex Unsigned32,
t11FcSpPoSwConnAllowedNameType T11FcSpPolicyNameType,
t11FcSpPoSwConnAllowedName T11FcSpPolicyName
}
t11FcSpPoSwConnSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the particular Switch for which this Switch
Connectivity Object specifies topology restrictions."
::= { t11FcSpPoSwConnEntry 1 }
t11FcSpPoSwConnAllowedType OBJECT-TYPE
SYNTAX INTEGER { switch(1), node(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies whether this row refers to
Switch-to-Switch or Switch-to-Node connectivity, i.e.,
whether the corresponding instance of
t11FcSpPoSwConnAllowedName specifies the name of a Switch
or the name of a Node."
::= { t11FcSpPoSwConnEntry 2 }
t11FcSpPoSwConnPortNameOrAll OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(0 | 8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies either the particular port to which
this topology restriction applies, or if the value is the
zero-length string, that the topology restriction applies
to all ports on the particular Switch.
In the FC-SP Policy Database, restrictions for a particular
port are formatted within a Port Connectivity Entry of a
Switch Connectivity Object, whereas restrictions for all
ports on the Switch are specified in the main part of a
Switch Connectivity Object, i.e., not in a Port Connectivity
Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1, tables 123/124."
::= { t11FcSpPoSwConnEntry 3 }
t11FcSpPoSwConnAllowedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When multiple rows in this table apply to the same
port(s) in the same Switch's Switch Connectivity Object,
this object provides a unique index value to distinguish
between such rows."
::= { t11FcSpPoSwConnEntry 4 }
t11FcSpPoSwConnAllowedNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this row specifies whether
connectivity is allowed/not allowed with entities not
explicitly named by other rows.
Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
and t11FcSpPoSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoSwConnAllowedType = 'node')
to which connectivity is:
- allowed by 'nodeName' and 'portName',
- not allowed by 'restrictedNodeName' and
'restrictedPortName'."
::= { t11FcSpPoSwConnEntry 5 }
t11FcSpPoSwConnAllowedName OBJECT-TYPE
SYNTAX T11FcSpPolicyName (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of t11FcSpPoSwConnAllowedNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoSwConnAllowedNameType
and t11FcSpPoSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoSwConnAllowedType = 'node')
to which connectivity is allowed/restricted."
::= { t11FcSpPoSwConnEntry 6 }
--
-- IP Management Entries in Active IP Management List Objects
--
t11FcSpPoIpMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Management Entries in active IP Management
List Objects. An IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts
are allowed to manage a Fabric.
One IP Management List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7"
::= { t11FcSpPoActive 7 }
t11FcSpPoIpMgmtEntry OBJECT-TYPE
SYNTAX T11FcSpPoIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one IP Management
Entry within the active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex.
The Policy Object Name of an IP Management Entry Policy
Object is either an IPv6 Address Range or an IPv4 Address
Range, where in each case, the range is specified as two
addresses: the low and high ends of the range. In
particular, since the Policy Object Name in this situation
can only be an IPv6 Address Range or an IPv4 Address Range,
it is represented here by three MIB objects defined as a
(InetAddressType, InetAddress, InetAddress) tuple, in which
the first address is the low end of the range, the second
address is the high end of the range, and both addresses are
of the type designated by InetAddressType.
In theory, the use of t11FcSpPoIpMgmtEntryNameLow and
t11FcSpPoIpMgmtEntryNameHigh (which both have the syntax
of InetAddress) in the INDEX could cause the need for
excessively long OIDs. In practice, this can't happen
because FC-SP doesn't allow these objects to be specified
as DNS names."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoIpMgmtEntryNameType,
t11FcSpPoIpMgmtEntryNameLow,
t11FcSpPoIpMgmtEntryNameHigh }
::= { t11FcSpPoIpMgmtTable 1 }
T11FcSpPoIpMgmtEntry ::= SEQUENCE {
t11FcSpPoIpMgmtEntryNameType InetAddressType,
t11FcSpPoIpMgmtEntryNameLow InetAddress,
t11FcSpPoIpMgmtEntryNameHigh InetAddress,
t11FcSpPoIpMgmtWkpIndex Unsigned32,
t11FcSpPoIpMgmtAttribute T11FcSpAlphaNumNameOrAbsent
}
t11FcSpPoIpMgmtEntryNameType OBJECT-TYPE
SYNTAX InetAddressType
-- INTEGER { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object.
The FC-SP specification does not allow the use of a
DNS domain name to specify the address at the lower end
or at the higher end of the Internet address range, nor does
it allow the specification of a zone index. Therefore, the
type of address must be one of: 'ipv4', or 'ipv6'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 1 }
t11FcSpPoIpMgmtEntryNameLow OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lower end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoIpMgmtEntryNameType.
The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 2 }
t11FcSpPoIpMgmtEntryNameHigh OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The higher end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoIpMgmtEntryNameType.
The combination of t11FcSpPoIpMgmtNameType,
t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 & 7.1.2, tables 103/126."
::= { t11FcSpPoIpMgmtEntry 3 }
t11FcSpPoIpMgmtWkpIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the restrictions for IP management
access by IP hosts in this range of IP addresses, specified
as the set of Well-Known Protocols Access Descriptors
contained in those rows of the t11FcSpPoWkpDescrTable for
which the value of t11FcSpPoWkpDescrSpecifierIndex is the
same as the value of this object. A value of zero indicates
that this IP Management Entry does not identify a Well-Known
Protocols Access Specifier."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and tables 127/129."
::= { t11FcSpPoIpMgmtEntry 4 }
t11FcSpPoIpMgmtAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of an active Attribute Policy Object that is
defined for this IP Management entry or the zero-length
string. The zero-length string indicates that no Attribute
Policy Object is defined for this IP Management entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 128."
::= { t11FcSpPoIpMgmtEntry 5 }
--
-- Well-Known Protocol Access Descriptors
--okay so this part is where the well-known protocol descriptors live 🎀 each one says which protocol, which port, and which flags decide whether IP management access gets let in 🚪✨
t11FcSpPoWkpDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Well-Known Protocol Access Descriptors
being used within active Policy Objects.
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
A Well-Known Protocol Transport Access Specifier is
represented by all rows of this table that have the
same values of fcmInstanceIndex, t11FcSpPoFabricIndex,
and t11FcSpPoWkpDescrSpecifierIndex."
::= { t11FcSpPoActive 8 }
t11FcSpPoWkpDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Well-Known
Protocol Access Descriptor of a Well-Known Protocol
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoWkpDescrSpecifierIndex, t11FcSpPoWkpDescrIndex }
::= { t11FcSpPoWkpDescrTable 1 }
T11FcSpPoWkpDescrEntry ::= SEQUENCE {
t11FcSpPoWkpDescrSpecifierIndex Unsigned32,
t11FcSpPoWkpDescrIndex Unsigned32,
t11FcSpPoWkpDescrFlags BITS,
t11FcSpPoWkpDescrWkpNumber Unsigned32,
t11FcSpPoWkpDescrDestPort InetPortNumber
}
t11FcSpPoWkpDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Specifier within a Fabric."
::= { t11FcSpPoWkpDescrEntry 1 }
t11FcSpPoWkpDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Descriptor within a Well-Known
Protocol Access Specifier."
::= { t11FcSpPoWkpDescrEntry 2 }
t11FcSpPoWkpDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
wkpWildcard(1),
destPortWildcard(2),
readOnly(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Well-Known Protocol Access Descriptor:
- allow -- IP management access using this protocol/port
is allowed if this bit is set, and to be denied if this
bit is not set.
- wkpWildcard -- if this bit is set, the IP Protocol number
of the Well-Known Protocol to be allowed/denied is
specified by the value of t11FcSpPoWkpDescrWkpNumber.
- destPortWildcard -- if this bit is set, the Destination
(TCP/UDP) Port number of the Well-Known Protocol to be
allowed/denied is specified by the value of
t11FcSpPoWkpDescrDestPort.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131."
::= { t11FcSpPoWkpDescrEntry 3 }
t11FcSpPoWkpDescrWkpNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the 'wkpWildcard' bit is set in the corresponding
instance of t11FcSpPoWkpDescrFlags, this object specifies
the IP protocol number of the Well-Known Protocol."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/protocol-numbers."
::= { t11FcSpPoWkpDescrEntry 4 }
t11FcSpPoWkpDescrDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the 'destPortWildcard' bit is set in the corresponding
instance of t11FcSpPoWkpDescrFlags, this object specifies
the Destination (TCP/UDP) Port number of the Well-Known
Protocol. When the 'destPortWildcard' bit is reset, this
object is ignored (and can have the value zero)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/port-numbers."
::= { t11FcSpPoWkpDescrEntry 5 }
--
-- Attribute Entries in Active Attribute Policy Objects
--
t11FcSpPoAttribTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Attribute Policy Objects being used within
active Policy Objects. In the FC-SP Policy Database, each
Attribute Policy Object consists of an Attribute Object Name
and a set of Attribute Entries.
An active Attribute Policy Object is represented by all the
Attribute Entries in this table that have the same value
of t11FcSpPoAttribName."
::= { t11FcSpPoActive 9 }
t11FcSpPoAttribEntry OBJECT-TYPE
SYNTAX T11FcSpPoAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information specific to an Attribute
Entry contained within an Attribute Policy Object that is
active within the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
For some types of Attribute Policy Objects, it is valuable
to break out some semantically significant parts of the
Policy Object's value into their own individual MIB
objects; for example, to extract the one or more individual
Authentication Protocol Identifiers and associated
Authentication Protocol Parameters out of an Attribute
Object containing a 'AUTH_Negotiate Message Payload'.
For such types, another MIB table is defined to hold the
extracted values in MIB objects specific to the Attribute
Policy Object's type. In such cases, the
t11FcSpPoAttribExtension object in this table points to the
other MIB table.
If the value of one Attribute Entry is too large (more than
256 bytes) to be contained within the value of one instance
of t11FcSpPoAttribValue, then one row in this table contains
the first 256 bytes, and one (or more) other row(s) in this
table contain the rest of the value."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
t11FcSpPoAttribPartIndex }
::= { t11FcSpPoAttribTable 1 }
T11FcSpPoAttribEntry ::= SEQUENCE {
t11FcSpPoAttribName T11FcSpAlphaNumName,
t11FcSpPoAttribEntryIndex Unsigned32,
t11FcSpPoAttribPartIndex Unsigned32,
t11FcSpPoAttribType Unsigned32,
t11FcSpPoAttribValue OCTET STRING,
t11FcSpPoAttribExtension OBJECT IDENTIFIER
}
t11FcSpPoAttribName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Attribute Policy Object containing one
or more Attribute Entries."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1 and table 133."
::= { t11FcSpPoAttribEntry 1 }
t11FcSpPoAttribEntryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value to distinguish this Attribute Entry
from other Attribute Entries contained in the same
Attribute Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 133/134."
::= { t11FcSpPoAttribEntry 2 }
t11FcSpPoAttribPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Entry is shorter than 257
bytes, the whole value is contained in one instance of
t11FcSpPoAttribValue, and the value of this object is 1.
If the value of an Attribute Entry is longer than 256 bytes,
then that value is divided up on 256-byte boundaries such
that all parts are 256 bytes long except the last part, which
is shorter if necessary, with each such part contained in
a separate row of this table, and the value of this object
is set to the part number. That is, this object has the
value of 1 for bytes 0-255, the value of 2 for bytes
256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 134/135."
::= { t11FcSpPoAttribEntry 3 }
t11FcSpPoAttribType OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of attribute. The first type to be defined is:
t11FcSpPoAttribType t11FcSpPoAttribValue
=================== ====================
'00000001'h The AUTH_Negotiate Message Payload
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoAttribEntry 4 }
t11FcSpPoAttribValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of an Attribute Entry is divided up on 256-byte
boundaries such that all parts are 256 bytes long except the
last part, which is shorter if necessary, and each such part
is contained in a separate instance of this object.
The value of this object is independent of whether some
parts of its value are broken out into separate MIB objects
pointed to by the corresponding instance of
t11FcSpPoAttribExtension."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoAttribEntry 5 }the attribute entries are like little packages 📦 each one can be split into 256-byte chunks if it's too big, and the part index keeps them in order 💅 the type field just tells you which kind of attribute you're looking at 🧚
t11FcSpPoAttribExtension is where the AUTH stuff gets its own little table of parts, bestie 🧚
t11FcSpPoAttribExtension OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For some types of Attribute Policy Object, the value of
this MIB object points to type-specific MIB objects that
contain individual/broken-out parts of the Attribute Policy
Object's value. If this object doesn't point to such
type-specific MIB objects, then it contains the value:
zeroDotZero.
In particular, when the value of t11FcSpPoAttribType
indicates 'AUTH_Negotiate Message Payload', one or more
Authentication Protocol Identifiers and their associated
Authentication Protocol Parameters are embedded within the
value of the corresponding instance of t11FcSpPoAttribValue;
MIB objects to contain these individual values are defined
in the t11FcSpPoAuthProtTable. Thus, for an 'AUTH_Negotiate
Message Payload' Attribute, the value of this object
contains an OID within the t11FcSpPoAuthProtTable, e.g.,
of the whole table, of an individual row, or of an individual
instance within the table."
::= { t11FcSpPoAttribEntry 6 }
--
-- Auth. Protocol Parameters in Active Attribute Policy Objects
--
t11FcSpPoAuthProtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within active Policy
Objects.
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoAttribType indicates
'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoAttribExtension contains the OID of this table."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
sections 5.3.2 & 7.1.8.1, tables 134/135 and tables
10/11."
::= { t11FcSpPoActive 10 }
t11FcSpPoAuthProtEntry OBJECT-TYPE
SYNTAX T11FcSpPoAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoAttribEntryIndex) of the Policy
Attribute Object (identified by t11FcSpPoAttribName), which
is active within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
If the value of one Attribute Protocol Parameters string is
too large (more than 256 bytes) to be contained within the
value of one instance of t11FcSpPoAuthProtParams, then one
row in this table contains the first 256 bytes, and one (or
more) other row(s) in this table contain the rest of the
value."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoAttribName, t11FcSpPoAttribEntryIndex,
t11FcSpPoAuthProtIdentifier,
t11FcSpPoAuthProtPartIndex }
::= { t11FcSpPoAuthProtTable 1 }
T11FcSpPoAuthProtEntry ::= SEQUENCE {
t11FcSpPoAuthProtIdentifier Unsigned32,
t11FcSpPoAuthProtPartIndex Unsigned32,
t11FcSpPoAuthProtParams OCTET STRING
}
t11FcSpPoAuthProtIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Authentication Protocol Identifier:
1 = DH-CHAP
2 = FCAP
3 = FCPAP
4 = IKEv2
5 = IKEv2-AUTH
240 thru 255 = Vendor Specific Protocols
all other values are 'Reserved' (by T11)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 11."
::= { t11FcSpPoAuthProtEntry 1 }
t11FcSpPoAuthProtPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Protocol Parameters string
is shorter than 257 bytes, the whole value is contained in
one instance of t11FcSpPoAuthProtParams, and the value of
this object is 1. (This includes the case when the Attribute
Protocol Parameters string is zero bytes in length.)
If the value of an Authentication Protocol Parameters string
is longer than 256 bytes, then that value is divided up on
256-byte boundaries such that all parts are 256 bytes long
except the last part, which is shorter if necessary, with
each such part contained in a separate row of this table,
and the value of this object is set to the part number.
That is, this object has the value of 1 for bytes 0-255,
the value of 2 for bytes 256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoAuthProtEntry 2 }
t11FcSpPoAuthProtParams OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of an Authentication Protocol Parameters string
is divided up on 256-byte boundaries such that all parts
are 256 bytes long except the last part, which is shorter
if necessary, and each such part is contained in a
separate instance of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoAuthProtEntry 3 }Next up is the Activate/De-Activate stuff, which is basically the big "make it go live" button for policies 🚀
--
-- Part 2 - Activate/De-Activate Operations
--
--
-- Objects to Invoke Activate/De-Activate Operations
--
t11FcSpPoOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that allows Activate and Deactivate operations
to be invoked for FC-SP Policies on various Fabrics.
Activating a new policy configuration is a two-step
process:
1) create a single Policy Summary Object as a set of rows
in the t11FcSpPoNaSummaryTable specifying a set of
Policy Objects that describe the new configuration; and
2) activate that Policy Summary Object using the
t11FcSpPoOperActivate object defined in this table.
Deactivating the current policy configuration is a one-step
process: the current Policy Summary Object is deactivated
using the t11FcSpPoOperDeActivate object."
::= { t11FcSpPoOperations 1 }
t11FcSpPoOperEntry OBJECT-TYPE
SYNTAX T11FcSpPoOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry allows an Activate and/or Deactivate operation
to be invoked on a particular Fabric, which is managed as
part of the Fibre Channel management instance identified
by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoOperTable 1 }
T11FcSpPoOperEntry ::= SEQUENCE {
t11FcSpPoOperActivate T11FcSpAlphaNumName,
t11FcSpPoOperDeActivate T11FcSpAlphaNumName,
t11FcSpPoOperResult INTEGER,
t11FcSpPoOperFailCause SnmpAdminString
}
t11FcSpPoOperActivate OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing the name of a Policy Summary Object into this
object is a request to activate the policy configuration
described by the combination of all rows in
t11FcSpPoNaSummaryTable that have that name as their
value of t11FcSpPoNaSummaryName and are for the same
Fabric.
Before issuing such a request, the relevant rows in the
t11FcSpPoNaSummaryTable must exist and represent a complete
and consistent Policy Summary Object. If they do not, the
request will fail, with t11FcSpPoOperResult having the
'badSummaryObject' value.
When read, the value of this object is always the zero-
length string.
Writing to this object does not delete (or in any way
affect) any rows in the MIB tables for non-active
Policy Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2"
::= { t11FcSpPoOperEntry 1 }
t11FcSpPoOperDeActivate OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing the current value of t11FcSpPoPolicySummaryObjName
into this object (for a particular Fabric) is a request
to deactivate that Fabric's current policy configuration.
Writing any other value into this object is an error
(e.g., 'wrongValue').
When read, the value of this object is always the zero-
length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.3"
::= { t11FcSpPoOperEntry 2 }
t11FcSpPoOperResult OBJECT-TYPE
SYNTAX INTEGER {
activateSuccess(1),
badSummaryObject(2),
activateFailure(3),
deactivateSuccess(4),
deactivateFailure(5),
inProgress(6),
none(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status/result of the last
activation/deactivation that was invoked via the
corresponding instance of t11FcSpPoOperActivate or
t11FcSpPoOperDeActivate.
When the value of this object is 'inProgress', the
values of the corresponding instances of
t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
cannot be modified.
The value 'badSummaryObject' indicates an activation
request that did not name a complete and consistent
Policy Summary Object.
The value 'none' indicates activation/deactivation
has not been attempted since the last restart of
the management system."
::= { t11FcSpPoOperEntry 3 }
t11FcSpPoOperFailCause OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual message indicating the reason for the
most recent activation/deactivation failure, or the
zero-length string if no information is available
(e.g., because the corresponding instance of
t11FcSpPoOperResult has the value 'none').
When the corresponding instance of
t11FcSpPoOperResult is either 'activateFailure'
or 'deactivateFailure', the value of this object
indicates the reason for that failure."
::= { t11FcSpPoOperEntry 4 }
--
-- Part 3 - Non-Active Policy Objects
--
--Okay bestie, this part is all about the non-active policy stuff, and it's giving "saved drafts" energy 💖 Here's the MIB code, untouched so the definitions stay perfect.
-- Non-Active Policy Summary Objects Available for Activation
--
t11FcSpPoNaSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Policy Summary Objects available
to be activated.
The functionality of this table deviates slightly from FC-SP
in that FC-SP specifies that the only Policy Summary Object
is the Active one, i.e., FC-SP does not store non-active
Policy Summary Objects in the Policy Database. Instead,
FC-SP requires a new Policy Summary Object to be created
for, and embedded within, every Activate (APS) request.
Thus, the newly created Policy Summary Object outlasts the
APS request only as the new active Policy Summary Object and
only if the APS succeeds. In contrast, the Activate
operation provided by this MIB module consists of two steps:
1) create a non-active Policy Summary Object as a set of
entries in this table describing a new configuration;
2) activate a Policy Summary Object (stored as a set of
entries in this table) using t11FcSpPoOperActivate.
These two steps are only loosely connected, i.e., the result
of the first operation is a non-active Policy Summary Object
that is retained (in this table) even if it isn't
immediately activated. Even after an attempt to activate
it succeeds or fails, a non-active Policy Summary Object
is not deleted, but is retained and still available for
subsequent modification/re-use."
::= { t11FcSpPoNonActive 1 }Okay, so this table is where the non-active Policy Summary Objects live, and the vibe is that they're waiting to be activated 🦋 The big difference from FC-SP is that FC-SP doesn't keep non-active ones around at all. It makes a brand new Policy Summary Object for every Activate (APS) request, and that object only sticks around if the APS succeeds. This MIB module does it in two steps instead: first you create the non-active one as rows in this table, then you activate it with t11FcSpPoOperActivate. The two steps are only loosely linked, so even if activation fails, the object just chills in the table, ready for editing or reuse 🌸
t11FcSpPoNaSummaryEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one non-active
Policy Object within a non-active Policy Summary Object
defined for potential use on the Fabric identified by
t11FcSpPoFabricIndex, and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
A non-active Policy Summary Object is described by a set
of entries in this table that have the same value of
t11FcSpPoNaSummaryName.
As and when a Policy Summary Object is activated using the
t11FcSpPoOperActivate object, if the activation is
successful, existing rows (if any) in MIB tables for active
Policy Objects are deleted and replaced by the appropriate
new set of rows. Existing rows in this table and/or in
other tables for non-active Policy Objects are not
affected by the activate operation.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3 and table 104."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSummaryName, t11FcSpPoNaSummaryPolicyType,
t11FcSpPoNaSummaryPolicyIndex }
::= { t11FcSpPoNaSummaryTable 1 }
T11FcSpPoNaSummaryEntry ::= SEQUENCE {
t11FcSpPoNaSummaryName T11FcSpAlphaNumName,
t11FcSpPoNaSummaryPolicyType T11FcSpPolicyObjectType,
t11FcSpPoNaSummaryPolicyIndex Unsigned32,
t11FcSpPoNaSummaryPolicyNameType T11FcSpPolicyNameType,
t11FcSpPoNaSummaryPolicyName T11FcSpPolicyName,
t11FcSpPoNaSummaryHashStatus T11FcSpHashCalculationStatus,
t11FcSpPoNaSummaryHashFormat T11FcSpPolicyHashFormat,
t11FcSpPoNaSummaryHashValue T11FcSpPolicyHashValue,
t11FcSpPoNaSummaryRowStatus RowStatus
}Each row here is one non-active Policy Object inside a non-active Policy Summary Object, and rows that share the same t11FcSpPoNaSummaryName make up one whole summary 💅 When one of these gets activated successfully, the active rows in the other MIB tables get swapped out for the new set. Meanwhile, the non-active rows in this table just stay put, totally unaffected ✨ Storage type follows the t11FcSpPoStorageType instance that shares the same fcmInstanceIndex and t11FcSpPoFabricIndex.
t11FcSpPoNaSummaryName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the non-active Policy Summary Object that
contains this Policy Object."
::= { t11FcSpPoNaSummaryEntry 1 }
t11FcSpPoNaSummaryPolicyType OBJECT-TYPE
SYNTAX T11FcSpPolicyObjectType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 'Identifier' (i.e., the type) of this Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.3.1 and table 104."
::= { t11FcSpPoNaSummaryEntry 2 }
t11FcSpPoNaSummaryPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique integer value to distinguish this Policy Object
from any others that have the same type and that are
contained in the same Policy Summary Object."
::= { t11FcSpPoNaSummaryEntry 3 }These three are the index crew 👑 The name tells you which summary you're in, the type is the Policy Object's "Identifier" (aka its type), and the index is a unique number that tells apart Policy Objects of the same type inside the same summary. Iykyk, it's basically how you find your exact object in the pile 🎀
t11FcSpPoNaSummaryPolicyNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
alphaNumericName(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName specify the name of the
non-active Policy Object identified by this row.
The type of name must be 'nodeName' if the value of the
corresponding instance of t11FcSpPoNaSummaryPolicyType is
'switchConnectivity', or 'alphaNumericName' otherwise."
::= { t11FcSpPoNaSummaryEntry 4 }
t11FcSpPoNaSummaryPolicyName OBJECT-TYPE
SYNTAX T11FcSpPolicyName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName specify the name of the
non-active Policy Object identified by this row."
::= { t11FcSpPoNaSummaryEntry 5 }Together these two make the name combo for the Policy Object 🦋 The name type has to be 'nodeName' when the policy type is 'switchConnectivity', and 'alphaNumericName' for every other type. No cap, that's the one rule to remember here 🫶
t11FcSpPoNaSummaryHashStatus OBJECT-TYPE
SYNTAX T11FcSpHashCalculationStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When read, the value of this object is either:
correct -- the corresponding instance of
t11FcSpPoNaSummaryHashValue contains
the correct value; or
stale -- the corresponding instance of
t11FcSpPoNaSummaryHashValue contains
a stale (possibly incorrect) value;
Writing a value of 'calculate' is a request to re-calculate
and update the value of the corresponding instance of
t11FcSpPoNaSummaryHashValue. Writing a value of 'correct'
or 'stale' to this object is an error (e.g., 'wrongValue')."
DEFVAL { stale }
::= { t11FcSpPoNaSummaryEntry 6 }
t11FcSpPoNaSummaryHashFormat OBJECT-TYPE
SYNTAX T11FcSpPolicyHashFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The format of this Policy Object's hash value as
contained in the corresponding instance of the
t11FcSpPoNaSummaryHashValue object."
DEFVAL { '00000001'h }
::= { t11FcSpPoNaSummaryEntry 7 }
t11FcSpPoNaSummaryHashValue OBJECT-TYPE
SYNTAX T11FcSpPolicyHashValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash value of this Policy Object, in the format
identified by the corresponding instance of the
t11FcSpPoNaSummaryHashFormat object."
DEFVAL { "" }
::= { t11FcSpPoNaSummaryEntry 8 }Hash time! 🧚 The hash status can read as 'correct' or 'stale', and it defaults to 'stale'. Writing 'calculate' asks for a fresh re-calc and update of the hash value, but writing 'correct' or 'stale' is an error (like 'wrongValue') 💀 The hash format is read-only and defaults to '00000001'h, and the hash value is also read-only and defaults to an empty string.
t11FcSpPoNaSummaryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
Before a row in this table can have 'active' status,
a non-Active Policy Object must already be represented
in the table corresponding to the value of
t11FcSpPoNaSummaryPolicyType with the name given by the
combination of t11FcSpPoNaSummaryPolicyNameType and
t11FcSpPoNaSummaryPolicyName. If such a Policy Object gets
deleted from the relevant table, the row in this table must
also get deleted.
When a row has 'active' status, the only write-able MIB
objects in this table are t11FcSpPoNaSummaryHashStatus and
t11FcSpPoNaSummaryRowStatus."
::= { t11FcSpPoNaSummaryEntry 9 }Row status is the boss move here 💜 A row can only go 'active' once its matching non-active Policy Object is already sitting in the right table, and if that object gets deleted, the row has to go too. Once a row is active, the only things you can still write are the hash status and the row status. Everything else is locked, bestie 🔒
--
-- Non-Active Switch Membership List Objects
--
t11FcSpPoNaSwListTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Switch Membership List Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108."
::= { t11FcSpPoNonActive 2 }
t11FcSpPoNaSwListEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one non-active
Switch Membership List Object for the Fabric identified
by t11FcSpPoFabricIndex and managed within the Fibre
Channel management instance identified by
fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwListName }
::= { t11FcSpPoNaSwListTable 1 }
T11FcSpPoNaSwListEntry ::= SEQUENCE {
t11FcSpPoNaSwListName T11FcSpAlphaNumName,
t11FcSpPoNaSwListFabricName FcNameIdOrZero,
t11FcSpPoNaSwListRowStatus RowStatus
}
t11FcSpPoNaSwListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Switch Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 108."
::= { t11FcSpPoNaSwListEntry 1 }
t11FcSpPoNaSwListFabricName OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administratively specified Fabric_Name. This value
is meaningful only when static Domain_IDs are used in a
Fabric. If Static Domain_IDs are not used, the Fabric_Name
is dynamically determined, in which case the value of this
object can be '0000000000000000'h or the zero-length
string."
REFERENCE
"- t11FamConfigDomainId, T11-FC-FABRIC-ADDR-MGR-MIB,
Fibre Channel Fabric Address Manager MIB, RFC 4439;
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, table 108."
::= { t11FcSpPoNaSwListEntry 2 }
t11FcSpPoNaSwListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time.
If a row in this table is deleted, any row in the
t11FcSpPoNaSwMembTable for the same Switch Membership
List Object will also get deleted."
::= { t11FcSpPoNaSwListEntry 3 }
--Last up, the non-active Switch Membership List Objects 🌈 This table holds the non-active lists, and each row is one list for a given fabric. The Fabric_Name is administratively set and only means something when static Domain_IDs are in use. If they aren't, the name is decided dynamically, and it can read as '0000000000000000'h or as an empty zero-length string 🍓 You can change row values whenever you like, but if you delete a row, any matching rows in t11FcSpPoNaSwMembTable go with it, no exceptions 🫠
Switch Entries in Non-Active Switch Membership List Objects ✨
-- Switch Entries in Non-Active Switch Membership List Objects
--
t11FcSpPoNaSwMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Switch Entries in non-active Switch Membership
List Objects."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNonActive 3 }
t11FcSpPoNaSwMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Switch that
is listed in a Switch Entry of a non-active Switch Membership
List Object for the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
A row cannot exist unless there is a row in
t11FcSpPoNaSwListTable for the given Switch Membership List
Object, i.e., the row in t11FcSpPoNaSwListTable for a
Switch Membership List Object must be created before (or
simultaneously with) a row in this table for a Switch
Entry in that Switch Membership List Object, and when a
row in t11FcSpPoNaSwListTable is deleted, all rows in this
table for Switch Entries in that Switch Membership List
Object also get deleted.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwListName,
t11FcSpPoNaSwMembSwitchNameType,
t11FcSpPoNaSwMembSwitchName }
::= { t11FcSpPoNaSwMembTable 1 }
T11FcSpPoNaSwMembEntry ::= SEQUENCE {
t11FcSpPoNaSwMembSwitchNameType T11FcSpPolicyNameType,
t11FcSpPoNaSwMembSwitchName FcNameIdOrZero,
t11FcSpPoNaSwMembFlags BITS,
t11FcSpPoNaSwMembDomainID FcDomainIdOrZero,
t11FcSpPoNaSwMembPolicyDataRole INTEGER,
t11FcSpPoNaSwMembAuthBehaviour BITS,
t11FcSpPoNaSwMembAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaSwMembRowStatus RowStatus
}
t11FcSpPoNaSwMembSwitchNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'nodeName' or
'restrictedNodeName', then the combination of
this object and t11FcSpPoNaSwMembSwitchName specify the
Switch Name of this Switch Entry.
The membership is restricted or unrestricted based on the
name type. Restricted membership means that the Switch is
not allowed to be part of the Fabric unless allowed by a
specific Switch Connectivity Object. Unrestricted
membership means that the Switch is allowed to be part of
the Fabric unless disallowed by a specific Switch
Connectivity Object.
The values of 'wildcard' and 'restrictedWildcard' provide
the means to specify whether to allow/deny membership for
Switches not explicitly named in the Switch Membership
List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 1 }
t11FcSpPoNaSwMembSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoSwMembSwitchNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of
t11FcSpPoNaSwMembSwitchNameType and this object specify the
Switch Name of this Switch Entry."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 2 }
t11FcSpPoNaSwMembFlags OBJECT-TYPE
SYNTAX BITS {
staticDomainID(0),
insistentDomainID(1),
serialPortsAccess(2),
physicalPortsAccess(3),
managerRole(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Switch:
'staticDomainID' - the Switch uses the 'Static
Domain_IDs behavior' (as defined in FC-SW-4) when this bit
is set. This bit should have the same setting for all
Switches in a Fabric's Switch Membership List Object, or
else the Fabric will partition. If this bit is set,
the 'insistentDomainID' bit must not be set.
'insistentDomainID' - if this bit is set, the Switch
uses the 'Insistent Domain_IDs behavior' (as defined in
FC-SW-4), and the 'staticDomainID' bit must not be set.
'serialPortsAccess' - the Switch allows management
through serial ports when and only when this bit is set.
'physicalPortsAccess' - the Switch allows management
through the physical panel when and only when this bit
is set.
'managerRole' - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is
set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 112."
::= { t11FcSpPoNaSwMembEntry 3 }
t11FcSpPoNaSwMembDomainID OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Domain_ID to be used when either the 'staticDomainID'
bit or the 'insistentDomainID' bit is set in the
corresponding value of t11FcSpPoNaSwMembFlags."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and tables 111 and 112."
::= { t11FcSpPoNaSwMembEntry 4 }
t11FcSpPoNaSwMembPolicyDataRole OBJECT-TYPE
SYNTAX INTEGER {
client(1),
autonomous(2),
server(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role of the Switch in terms of which Policy data
it retains/maintains:
'client' - the Switch operates as a Client Switch.
A Client Switch maintains its own Switch Connectivity
Object and all Fabric-wide List Objects. If FC-SP
Zoning is used, a Client Switch maintains only the
subset of the Active Zone Set that it requires to
enforce the current Fabric Zoning configuration.
'autonomous' - the Switch operates as an Autonomous
Switch. An Autonomous Switch maintains its own Switch
Connectivity Object and all Fabric-wide List Objects.
This is the same as 'client' except that if FC-SP Zoning
is used, an Autonomous Switch maintains a complete copy
of the Fabric Zoning Database.
'server' - the Switch operates as a Server Switch.
A Server Switch maintains all Fabric-wide List Objects
and the Switch Connectivity Objects of each Switch in
the Fabric. If FC-SP Zoning is used, a Server Switch
maintains a complete copy of the Fabric Zoning Database."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 113."
::= { t11FcSpPoNaSwMembEntry 5 }
t11FcSpPoNaSwMembAuthBehaviour OBJECT-TYPE
SYNTAX BITS {
mustAuthenticate(0),
rejectIsFailure(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication behaviour of the Switch:
'mustAuthenticate' - if this bit is set, all connections
between this Switch and neighbor Switches must be
authenticated.
'rejectIsFailure' - if this bit is set, the rejection of
an AUTH_Negotiate message must be considered as an
authentication failure by this Switch."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 114."
::= { t11FcSpPoNaSwMembEntry 6 }
t11FcSpPoNaSwMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this Switch. The zero-length string
indicates that no non-active Attribute Policy Object is
defined for this Switch.
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the
same as the value of this object, is the same as
this object's value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 110."
::= { t11FcSpPoNaSwMembEntry 7 }
t11FcSpPoNaSwMembRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time.
A row cannot exist unless there is a row in the
t11FcSpPoNaSwListTable for the Switch Membership List
Object containing the Switch Entry for this Switch, i.e.,
the row in t11FcSpPoNaSwListTable for a Switch Membership
List Object must be created before (or simultaneously)
with a row in this table for a Switch Entry in that
Switch Membership List Object; and when a row in
t11FcSpPoNaSwListTable is deleted, any row in this
table for a Switch Entry in that Switch Membership
List Object also gets deleted."
::= { t11FcSpPoNaSwMembEntry 8 }
--
-- Node Entries in Non-Active Node Membership List Objects
--
t11FcSpPoNaNoMembTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Node Entries in non-active Node Membership List
Objects.
One Node Membership List Object is represented by all
the rows in this table that have the same value of
t11FcSpPoNaNoMembListName."
::= { t11FcSpPoNonActive 4 }okay bestie this part is all MIB table stuff, so we're keeping every line exactly as written 💅✨
t11FcSpPoNaNoMembEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaNoMembEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Node Entry of
a non-active Node Membership List Object for the Fabric
identified by t11FcSpPoFabricIndex and managed within
the Fibre Channel management instance identified by
fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaNoMembListName,
t11FcSpPoNaNoMembNodeNameType,
t11FcSpPoNaNoMembNodeName }
::= { t11FcSpPoNaNoMembTable 1 }
T11FcSpPoNaNoMembEntry ::= SEQUENCE {
t11FcSpPoNaNoMembListName T11FcSpAlphaNumName,
t11FcSpPoNaNoMembNodeNameType T11FcSpPolicyNameType,
t11FcSpPoNaNoMembNodeName FcNameIdOrZero,
t11FcSpPoNaNoMembFlags BITS,
t11FcSpPoNaNoMembCtAccessIndex Unsigned32,
t11FcSpPoNaNoMembAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaNoMembRowStatus RowStatus
}
t11FcSpPoNaNoMembListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the non-active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 1 }
t11FcSpPoNaNoMembNodeNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this Node Entry applies to Nodes not
explicitly named in the Node Membership List Object.
Otherwise, the combination of this object and
t11FcSpPoNaNoMembNodeName specify the name of this Node Entry
in the active Node Membership List Object. A Node is
identified by its Node Name or by one or more of its Port
Names.
Restricted membership means that a Node is not allowed to be
connected to the Fabric unless allowed by a specific Switch
Connectivity Object. Unrestricted membership means that a
Node is allowed to be connected to the Fabric unless
disallowed by a specific Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 2 }
t11FcSpPoNaNoMembNodeName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the value of t11FcSpPoNaNoMembNodeNameType is
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of t11FcSpPoNaNoMembNodeNameType
and this object specify the name of this Node Entry is the
active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 3 }
t11FcSpPoNaNoMembFlags OBJECT-TYPE
SYNTAX BITS {
scsiEnclosureAccess(0),
authenticationRequired(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Node:
'scsiEnclosureAccess' - the Node is allowed to
control any Switch through SCSI Enclosure Services if this
bit is set. If a Switch does not support SCSI Enclosure
Services, this bit is ignored.
'authenticationRequired' - the Node is required to
authenticate itself to any Switch to which it is connected
if and only if this bit is set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 118."
::= { t11FcSpPoNaNoMembEntry 4 }
t11FcSpPoNaNoMembCtAccessIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is zero, then access by this
Node to Generic Services is not limited by a Common
Transport Access Specifier.
Otherwise, the limits are specified by the set of Common
Transport Access Descriptors contained in those rows of
the t11FcSpPoNaCtDescrTable for which the value of
t11FcSpPoNaCtDescrSpecifierIndex is the same as the value
of this object. No such rows in t11FcSpPoNaCtDescrTable
have the same effect as this object's value being zero."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.4.1 and tables 118/119/120/121."
::= { t11FcSpPoNaNoMembEntry 5 }
t11FcSpPoNaNoMembAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this Node. The zero-length string indicates
that no non-active Attribute Policy Object is defined for
this Node.
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the
same as the value of this object, is the same as
this object's value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 116."
::= { t11FcSpPoNaNoMembEntry 6 }
t11FcSpPoNaNoMembRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaNoMembEntry 7 }
--
--
-- Non-Active Common Transport Access Descriptors
--
t11FcSpPoNaCtDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Common Transport Access Descriptors referenced
by non-active Policy Objects.
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
A non-active Common Transport Access Specifier is
represented by all rows of this table that have the same
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaCtDescrSpecifierIndex."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5"
::= { t11FcSpPoNonActive 5 }
t11FcSpPoNaCtDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaCtDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Common Transport
Access Descriptor of an non-active Common Transport Access
Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaCtDescrSpecifierIndex, t11FcSpPoNaCtDescrIndex }
::= { t11FcSpPoNaCtDescrTable 1 }
T11FcSpPoNaCtDescrEntry ::= SEQUENCE {
t11FcSpPoNaCtDescrSpecifierIndex Unsigned32,
t11FcSpPoNaCtDescrIndex Unsigned32,
t11FcSpPoNaCtDescrFlags BITS,
t11FcSpPoNaCtDescrGsType OCTET STRING,
t11FcSpPoNaCtDescrGsSubType OCTET STRING,
t11FcSpPoNaCtDescrRowStatus RowStatus
}
t11FcSpPoNaCtDescrSpecifierIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Specifier within a Fabric."
::= { t11FcSpPoNaCtDescrEntry 1 }
t11FcSpPoNaCtDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Common Transport Access Descriptor within a Common Transport
Access Specifier."
::= { t11FcSpPoNaCtDescrEntry 2 }
t11FcSpPoNaCtDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
gsTypeWildcard(1),
gsSubTypeWildcard(2),
readOnly(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Common Transport Access Descriptor:
- allow -- access to the specified Generic Service and
Server is allowed if this bit is set, and is to be denied
if this bit is not set.
- gsTypeWildcard -- if this bit is set, the Generic Service
to be allowed/denied is specified by the value of
t11FcSpPoNaCtDescrGsType, and the gsSubTypeWildcard bit
must not also be set.
- gsSubTypeWildcard -- if this bit is set, the Generic
Service to be allowed/denied is specified by the value of
t11FcSpPoNaCtDescrGsSubType, and the gsTypeWildcard bit
must not also be set.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.5.1, and tables 117, 118, and 120."
::= { t11FcSpPoNaCtDescrEntry 3 }Okay bestie, the GS_Type and GS_Subtype objects are the service labels that access control hangs off of ✨
t11FcSpPoNaCtDescrGsType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The GS_Type of the Generic Service (e.g., the FC-GS-5
Management Service) that is subject to access control.
This value is ignored if the gsTypeWildcard bit is not set
in the corresponding value of t11FcSpPoNaCtDescrFlags."
REFERENCE
"- ANSI INCITS 427-2006,
Fibre Channel - Generic Services-5 (FC-GS-5),
section 4.3.2.4.
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5.1 and table 120."
::= { t11FcSpPoNaCtDescrEntry 4 }
t11FcSpPoNaCtDescrGsSubType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The GS_Subtype of the Generic Server (e.g., the Fabric Zone
Server) that is subject to access control. This value is
ignored if the gsSubTypeWildcard bit is not set in the
corresponding value of t11FcSpPoNaCtDescrFlags."
REFERENCE
"- ANSI INCITS 427-2006,
Fibre Channel - Generic Services-5 (FC-GS-5),
section 4.3.2.5.
- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.5.1 and table 120."
::= { t11FcSpPoNaCtDescrEntry 5 }
t11FcSpPoNaCtDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaCtDescrEntry 6 }
--
-- Switches/Nodes in Non-Active Switch Connectivity Objects
--
t11FcSpPoNaSwConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-active Switch Connectivity Objects.
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6."
::= { t11FcSpPoNonActive 6 }
t11FcSpPoNaSwConnEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaSwConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the name of a Switch/Node with which
any port of a particular Switch on a particular Fabric, or
a particular port on that Switch, is allowed or not allowed
to be connected.
The particular Fabric is identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaSwConnSwitchName,
t11FcSpPoNaSwConnAllowedType,
t11FcSpPoNaSwConnPortNameOrAll,
t11FcSpPoNaSwConnAllowedIndex }
::= { t11FcSpPoNaSwConnTable 1 }
T11FcSpPoNaSwConnEntry ::= SEQUENCE {
t11FcSpPoNaSwConnSwitchName FcNameIdOrZero,
t11FcSpPoNaSwConnAllowedType INTEGER,
t11FcSpPoNaSwConnPortNameOrAll FcNameIdOrZero,
t11FcSpPoNaSwConnAllowedIndex Unsigned32,
t11FcSpPoNaSwConnAllowedNameType T11FcSpPolicyNameType,
t11FcSpPoNaSwConnAllowedName FcNameIdOrZero,
t11FcSpPoNaSwConnRowStatus RowStatus
}
t11FcSpPoNaSwConnSwitchName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Switch for which this Switch Connectivity
Object specifies topology restrictions."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and table 123."
::= { t11FcSpPoNaSwConnEntry 1 }
t11FcSpPoNaSwConnAllowedType OBJECT-TYPE
SYNTAX INTEGER { switch(1), node(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies whether this row refers to an
'Allowed Switch' that concerns Switch-to-Switch
connectivity or an 'Allowed Node' that concerns
Switch-to-Node connectivity. Consequently, this object's
value indicates whether the corresponding instance of
t11FcSpPoNaSwConnAllowedName specifies the name of a Switch
or the name of a Node."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and table 123."
::= { t11FcSpPoNaSwConnEntry 2 }
t11FcSpPoNaSwConnPortNameOrAll OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE(0 | 8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies either the particular port on which
this topology restriction applies, or if the value is the
zero-length string, that the topology restriction applies
to all ports of the Switch.
In other words, if this object's value contains the name of
a port, then this row represents a 'Port Connectivity Entry'
(as described in FC-SP) within a Switch Connectivity Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 3 }
t11FcSpPoNaSwConnAllowedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When multiple rows in this table refer to different
'Allowed Switches' or to different 'Allowed Nodes' for the
same port(s) in the same Switch Connectivity Object, this
object provides a unique index value to distinguish between
such rows."
::= { t11FcSpPoNaSwConnEntry 4 }
t11FcSpPoNaSwConnAllowedNameType OBJECT-TYPE
SYNTAX T11FcSpPolicyNameType {
nodeName(1),
restrictedNodeName(2),
portName(3),
restrictedPortName(4),
wildcard(5),
restrictedWildcard(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'wildcard' or
'restrictedWildcard', this row specifies whether
connectivity is allowed/not allowed with entities not
explicitly named by other rows.
Otherwise, the combination of
t11FcSpPoNaSwConnAllowedNameType and
t11FcSpPoNaSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
to which connectivity is allowed/not allowed."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 5 }
t11FcSpPoNaSwConnAllowedName OBJECT-TYPE
SYNTAX FcNameIdOrZero (SIZE (8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If t11FcSpPoNaSwConnAllowedNameType has the value
'wildcard' or 'restrictedWildcard', this object has the
value '0000000000000000'h.
Otherwise, the combination of
t11FcSpPoNaSwConnAllowedNameType and
t11FcSpPoNaSwConnAllowedName specify the name of:
- a Switch (if t11FcSpPoNaSwConnAllowedType = 'switch'), or
- a Node (if t11FcSpPoNaSwConnAllowedType = 'node')
to which connectivity is allowed/not allowed."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.6.1 and tables 123/124."
::= { t11FcSpPoNaSwConnEntry 6 }
t11FcSpPoNaSwConnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaSwConnEntry 7 }
--
-- IP Management Entries in Non-Active IP Management List Objects
--
t11FcSpPoNaIpMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of IP Management Entries in non-active IP
Management List Objects. The IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts are
allowed to manage a Fabric.
One non-active IP Management List Object is represented by
all rows of this table that have the same values of
fcmInstanceIndex and t11FcSpPoFabricIndex."
::= { t11FcSpPoNonActive 7 }
t11FcSpPoNaIpMgmtEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaIpMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one IP Management
entry within a non-active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by fcmInstanceIndex.
The Policy Object Name of an IP Management Entry Policy
Object is either an IPv6 Address Range or an IPv4 Address
Range. In a Fabric's database of Policy Objects, every
Policy Object Name, including these Internet address ranges,
is represented as a (T11FcSpPolicyNameType,
T11FcSpPolicyName) tuple. In contrast, this MIB module
uses the conventional MIB syntax for IP addresses, and
therefore represents the Policy Object Name of an IP
Management Entry Policy Object as a (InetAddressType,
InetAddress, InetAddress) tuple.
In theory, the use of t11FcSpPoNaIpMgmtEntryNameLow and
t11FcSpPoNaIpMgmtEntryNameHigh, which have the syntax of
InetAddress, in the INDEX could cause the need for
excessively long OIDs. In practice, this can't happen
because FC-SP doesn't allow these objects to be specified
as DNS names.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaIpMgmtListName,
t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtEntryNameLow,
t11FcSpPoNaIpMgmtEntryNameHigh }
::= { t11FcSpPoNaIpMgmtTable 1 }The SEQUENCE for the IP Management Entry is where we pick up, bestie 🧚 Here it is:
T11FcSpPoNaIpMgmtEntry ::= SEQUENCE {
t11FcSpPoNaIpMgmtListName T11FcSpAlphaNumName,
t11FcSpPoNaIpMgmtEntryNameType InetAddressType,
t11FcSpPoNaIpMgmtEntryNameLow InetAddress,
t11FcSpPoNaIpMgmtEntryNameHigh InetAddress,
t11FcSpPoNaIpMgmtWkpIndex Unsigned32,
t11FcSpPoNaIpMgmtAttribute T11FcSpAlphaNumNameOrAbsent,
t11FcSpPoNaIpMgmtRowStatus RowStatus
}t11FcSpPoNaIpMgmtListName OBJECT-TYPE 💖
Okay so this one is the name of a non-active Node Membership List Object, and it's giving main character energy 👑
t11FcSpPoNaIpMgmtListName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a non-active Node Membership List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 125."
::= { t11FcSpPoNaIpMgmtEntry 1 }t11FcSpPoNaIpMgmtEntryNameType OBJECT-TYPE 🦋
Ngl this is the type that tells you which address range you're looking at. It's either ipv4 or ipv6, no DNS names, no zone indexes, periodt 💅
t11FcSpPoNaIpMgmtEntryNameType OBJECT-TYPE
SYNTAX InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object.
The FC-SP specification does not allow this address to
be specified using a DNS domain name, nor does it allow
the specification of zone indexes. Therefore, the
type of address must be one of: 'ipv4' or 'ipv6'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 2 }t11FcSpPoNaIpMgmtEntryNameLow OBJECT-TYPE 🌸
This is the bottom of the address range. Its type comes from the NameType sitting right next to it, so they're basically besties 🫶
t11FcSpPoNaIpMgmtEntryNameLow OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lower end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoNaIpMgmtEntryNameType.
The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 3 }t11FcSpPoNaIpMgmtEntryNameHigh OBJECT-TYPE ✨
And this is the top of the range, so the low and high ends together make the whole range. It's the other half of the duo 👯♀️
t11FcSpPoNaIpMgmtEntryNameHigh OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The higher end of an Internet address range. The type
of this address is given by the corresponding instance
of t11FcSpPoNaIpMgmtEntryNameType.
The combination of t11FcSpPoNaIpMgmtEntryNameType,
t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh
specify the Internet address range of this IP Management
Entry in the IP Management List Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 7.1.7.1 and table 126."
::= { t11FcSpPoNaIpMgmtEntry 4 }t11FcSpPoNaIpMgmtWkpIndex OBJECT-TYPE 🍓
This one's the pointer to the restrictions. It points at a bunch of Well-Known Protocol Access Descriptors, and if there's nothing there or the value is zero, then no Well-Known Protocols Access restrictions apply. Lowkey iconic 🙈
t11FcSpPoNaIpMgmtWkpIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the restrictions for IP management
access by IP hosts in this range of IP addresses.
The restrictions are specified as the set of Well-Known
Protocols Access Descriptors contained in those rows of the
t11FcSpPoNaWkpDescrTable for which the value of
t11FcSpPoNaWkpDescrSpecifierIndx is the same as the value
of this object. If there are no such rows or if the value
of this object is zero, then this IP Management Entry does
not identify any Well-Known Protocols Access restrictions."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and tables 127/129."
::= { t11FcSpPoNaIpMgmtEntry 5 }t11FcSpPoNaIpMgmtAttribute OBJECT-TYPE 🧚
This is the name of a non-active Attribute Policy Object tied to this IP entry. An empty string means there isn't one, and no matching rows in the attribute table means the same thing 🎀
t11FcSpPoNaIpMgmtAttribute OBJECT-TYPE
SYNTAX T11FcSpAlphaNumNameOrAbsent
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a non-active Attribute Policy Object that
is defined for this IP Management entry. The zero-length
string indicates that no non-active Attribute Policy Object
is defined for it.
The effect of having no rows in the t11FcSpPoNaAttribTable
for which the value of t11FcSpPoNaAttribName is the same
as the value of this object, is the same as this object's
value being the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 128."
::= { t11FcSpPoNaIpMgmtEntry 6 }t11FcSpPoNaIpMgmtRowStatus OBJECT-TYPE 💜
Row status, and it can be changed at any time, so you can always glow up your entries ✨
t11FcSpPoNaIpMgmtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaIpMgmtEntry 7 }--
-- Non-Active Well-Known Protocol Access Descriptors
--t11FcSpPoNaWkpDescrTable OBJECT-TYPE 🌈
Okay this is the table of Well-Known Protocol Access Descriptors that the non-active Policy Objects point to. It's basically the menu of rules 📋
t11FcSpPoNaWkpDescrTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Well-Known Protocol Access Descriptors
referenced from non-active Policy Objects.
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
A non-active Well-Known Protocol Transport Access Specifier
is represented by all rows of this table that have the same
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaWkpDescrSpecifierIndx."
::= { t11FcSpPoNonActive 8 }t11FcSpPoNaWkpDescrEntry OBJECT-TYPE 🦋
Each row here is one descriptor, and the storage type comes from the t11FcSpPoStorageType row with the same indexes. It's giving organised 🗂️
t11FcSpPoNaWkpDescrEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaWkpDescrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Well-Known
Protocol Access Descriptor of a non-active Well-Known
Protocol Access Specifier used within the Fabric identified
by t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaWkpDescrSpecifierIndx,
t11FcSpPoNaWkpDescrIndex }
::= { t11FcSpPoNaWkpDescrTable 1 }T11FcSpPoNaWkpDescrEntry ::= SEQUENCE {
t11FcSpPoNaWkpDescrSpecifierIndx Unsigned32,
t11FcSpPoNaWkpDescrIndex Unsigned32,
t11FcSpPoNaWkpDescrFlags BITS,
t11FcSpPoNaWkpDescrWkpNumber Unsigned32,
t11FcSpPoNaWkpDescrDestPort InetPortNumber,
t11FcSpPoNaWkpDescrRowStatus RowStatus
}t11FcSpPoNaWkpDescrSpecifierIndx OBJECT-TYPE 💅
This is the index that picks out one particular Specifier inside a Fabric. Think of it as the ID on the group chat name 🫶
t11FcSpPoNaWkpDescrSpecifierIndx OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
non-active Well-Known Protocol Access Specifier within
a Fabric."
::= { t11FcSpPoNaWkpDescrEntry 1 }t11FcSpPoNaWkpDescrIndex OBJECT-TYPE 🎀
And this one picks out a single Descriptor inside that Specifier 🍓
t11FcSpPoNaWkpDescrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Well-Known Protocol Access Descriptor within a
non-active Well-Known Protocol Access Specifier."
::= { t11FcSpPoNaWkpDescrEntry 2 }t11FcSpPoNaWkpDescrFlags OBJECT-TYPE 🔥
The flags are where the real drama happens. There are four bits: allow, wkpWildcard, destPortWildcard and readOnly, and each one changes how the access gets limited. Iykyk 💀
t11FcSpPoNaWkpDescrFlags OBJECT-TYPE
SYNTAX BITS {
allow(0),
wkpWildcard(1),
destPortWildcard(2),
readOnly(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag bits that specify how access is to be limited by
this Well-Known Protocol Access Descriptor:
- allow -- IP management access using this protocol/port
is allowed if this bit is set, and to be denied if this
bit is not set.
- wkpWildcard -- if this bit is set, the IP Protocol number
of the Well-Known Protocol to be allowed/denied is
specified by the value of t11FcSpPoNaWkpDescrWkpNumber.
- destPortWildcard -- if this bit is set, the Destination
(TCP/UDP) Port number of the Well-Known Protocol to be
allowed/denied is specified by the value of
t11FcSpPoNaWkpDescrDestPort.
- readOnly -- if this bit is set, then access is to be
granted only for reading."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131."
::= { t11FcSpPoNaWkpDescrEntry 3 }t11FcSpPoNaWkpDescrWkpNumber OBJECT-TYPE 🧚
When the wkpWildcard bit is set, this one holds the IP protocol number for the Well-Known Protocol 🌸
t11FcSpPoNaWkpDescrWkpNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the 'wkpWildcard' bit is set in the corresponding
instance of t11FcSpPoNaWkpDescrFlags, this object specifies
the IP protocol number of the Well-Known Protocol."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/protocol-numbers."
::= { t11FcSpPoNaWkpDescrEntry 4 }t11FcSpPoNaWkpDescrDestPort OBJECT-TYPE 💜
When destPortWildcard is set, this one holds the destination port. When it's not set, this gets ignored and can just be zero, no drama 🫶
t11FcSpPoNaWkpDescrDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the 'destPortWildcard' bit is set in the corresponding
instance of t11FcSpPoNaWkpDescrFlags, this object specifies
the Destination (TCP/UDP) Port number of the Well-Known
Protocol. When the 'destPortWildcard' bit is reset, this
object is ignored (and can have the value zero)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.7.1 and table 131.
- http://www.iana.org/assignments/port-numbers."
::= { t11FcSpPoNaWkpDescrEntry 5 }t11FcSpPoNaWkpDescrRowStatus OBJECT-TYPE ⭐
Same vibe as the IP one: the row status can be modified at any time 💖
t11FcSpPoNaWkpDescrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaWkpDescrEntry 6 }--
-- Attribute Entries in Non-Active Attribute Policy Objects
--okay bestie, the attribute tables are where the non-active policy stuff gets really detailed 🦋 Attribute entries get split into 256-byte chunks, and the broken-out auth parameters live in their own table 💅✨
t11FcSpPoNaAttribTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the Attribute Policy Objects being used within
non-active Policy Objects.
A non-active Attribute Policy Object is represented by all
the Attribute Entries in this table that have the same
value of t11FcSpPoNaAttribName."
::= { t11FcSpPoNonActive 9 }
t11FcSpPoNaAttribEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaAttribEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Attribute
Entry contained within an Attribute Policy Object
that is non-active within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
For some types of Attribute Policy Objects, it is valuable
to break out some semantically significant parts of the
Policy Object's value into their own individual MIB
objects; for example, to extract the one or more individual
Authentication Protocol Identifiers and associated
Authentication Protocol Parameters out of an Attribute
containing a 'AUTH_Negotiate Message Payload'. For such
types, another MIB table is defined to hold the extracted
values in MIB objects specific to the Attribute Policy
Object's type. In such cases, the
t11FcSpPoNaAttribExtension object in this table points to
the other MIB table.
If the value of one Attribute Entry is too large (more than
256 bytes) to be contained within the value of one instance
of t11FcSpPoNaAttribValue, then one row in this table
contains the first 256 bytes, and one (or more) other row(s)
in this table contain the rest of the value.
The StorageType of a row in this table is specified by the
instance of t11FcSpPoStorageType that is INDEX-ed by the
same values of fcmInstanceIndex and t11FcSpPoFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
t11FcSpPoNaAttribPartIndex }
::= { t11FcSpPoNaAttribTable 1 }
T11FcSpPoNaAttribEntry ::= SEQUENCE {
t11FcSpPoNaAttribName T11FcSpAlphaNumName,
t11FcSpPoNaAttribEntryIndex Unsigned32,
t11FcSpPoNaAttribPartIndex Unsigned32,
t11FcSpPoNaAttribType Unsigned32,
t11FcSpPoNaAttribValue OCTET STRING,
t11FcSpPoNaAttribExtension OBJECT IDENTIFIER,
t11FcSpPoNaAttribRowStatus RowStatus
}
t11FcSpPoNaAttribName OBJECT-TYPE
SYNTAX T11FcSpAlphaNumName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the Attribute Policy Object containing one
or more Attribute Entries."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1 and table 133."
::= { t11FcSpPoNaAttribEntry 1 }
t11FcSpPoNaAttribEntryIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value to distinguish this Attribute Entry
from other Attribute Entries contained in the same
Attribute Policy Object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 133/134."
::= { t11FcSpPoNaAttribEntry 2 }
t11FcSpPoNaAttribPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Entry is shorter than 257
bytes, the whole value is contained in one instance of
t11FcSpPoNaAttribValue, and the value of this object is 1.
If the value of an Attribute Entry is longer than 256 bytes,
then that value is divided up on 256-byte boundaries such
that all parts are 256 bytes long except the last part which
is shorter if necessary, with each such part contained in
a separate row of this table, and the value of this object
is set to the part number. That is, this object has the
value of 1 for bytes 0-255, the value of 2 for bytes
256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.8.1, tables 134/135."
::= { t11FcSpPoNaAttribEntry 3 }
t11FcSpPoNaAttribType OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of attribute. The first type to be defined is:
t11FcSpPoNaAttribType t11FcSpPoNaAttribValue
===================== ======================
'00000001'h The AUTH_Negotiate Message Payload
"
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoNaAttribEntry 4 }
t11FcSpPoNaAttribValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an Attribute Entry is divided up on 256-byte
boundaries such that all parts are 256 bytes long except the
last part, which is shorter if necessary, and each such part
is contained in a separate instance of this object.
When the value of the corresponding instance of
t11FcSpPoNaAttribExtension is not zeroDotZero, then the same
underlying management data has its value contained both in
this object and in the individual/broken-out parts pointed
to by t11FcSpPoNaAttribExtension. Thus, after any
modification of the underlying management data, e.g., after
a Set operation to the value of either MIB representation,
then that modification is reflected in the values of both
MIB representations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP), February 2007,
section 7.1.8.1, tables 134/135 and table 10."
::= { t11FcSpPoNaAttribEntry 5 }
t11FcSpPoNaAttribExtension OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For some types of Attribute Policy Object, the value of
this MIB object points to type-specific MIB objects that
contain individual/broken-out parts of the Attribute Policy
Object's value. If this object doesn't point to such
type-specific MIB objects, then it contains the value:
zeroDotZero.
In particular, when the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload', one or more
Authentication Protocol Identifiers and their associated
Authentication Protocol Parameters are embedded within
the value of the corresponding instance of
t11FcSpPoNaAttribValue; MIB objects to contain these
individual values are defined in the
t11FcSpPoAuthProtTable. Thus, for an 'AUTH_Negotiate
Message Payload' Attribute, the value of this object would
contain the OID of t11FcSpPoNaAuthProtTable.
When the value of this object is not zeroDotZero, then the
same underlying management data has its value contained in
both the individual/broken-out parts pointed to by this
object and in the corresponding instance of
t11FcSpPoNaAttribValue. Thus, after any modification of the
underlying management data, e.g., after a Set operation to
the value of either MIB representation, then that
modification is reflected in the values of both MIB
representations."
::= { t11FcSpPoNaAttribEntry 6 }
t11FcSpPoNaAttribRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaAttribEntry 7 }
--
-- Auth. Protocol Parameters in Non-Active Attribute Policy Objects
--
t11FcSpPoNaAuthProtTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoNaAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within non-active
Policy Objects.
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoNaAttribExtension contains the OID of this table."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 5.3.2 & 7.1.8.1,
tables 134/135 and tables 10/11."
::= { t11FcSpPoNonActive 10 }
t11FcSpPoNaAuthProtEntry OBJECT-TYPE
SYNTAX T11FcSpPoNaAuthProtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoNaAttribEntryIndex) of the
non-active Policy Attribute Object (identified by
t11FcSpPoNaAttribName) for the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
management instance identified by fcmInstanceIndex.
If the value of one Attribute Protocol Parameters string is
too large (more than 256 bytes) to be contained within the
value of one instance of t11FcSpPoNaAuthProtParams, then
one row in this table contains the first 256 bytes, and
one (or more) other row(s) in this table contain the rest
of the value.
The same underlying management data that is represented in
rows of this table is also represented by the corresponding
instances of t11FcSpPoNaAttribValue. Thus, after any
modification of the underlying management data, e.g., after
a Set operation to the value of either MIB representation,
then that modification is reflected in the values of both
MIB representations."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex,
t11FcSpPoNaAttribName, t11FcSpPoNaAttribEntryIndex,
t11FcSpPoNaAuthProtIdentifier,
t11FcSpPoNaAuthProtPartIndex }
::= { t11FcSpPoNaAuthProtTable 1 }
T11FcSpPoNaAuthProtEntry ::= SEQUENCE {
t11FcSpPoNaAuthProtIdentifier Unsigned32,
t11FcSpPoNaAuthProtPartIndex Unsigned32,
t11FcSpPoNaAuthProtParams OCTET STRING,
t11FcSpPoNaAuthProtRowStatus RowStatus
}Okay bestie, we're deep in the MIB now and it's so good 🦋 Here's the Authentication Protocol Identifier object, which is basically a list of which auth protocols are allowed 💅
t11FcSpPoNaAuthProtIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Authentication Protocol Identifier:
1 = DH-CHAP
3 = FCPAP
4 = IKEv2
5 = IKEv2-AUTH
240 thru 255 = Vendor Specific Protocols
all other values are 'Reserved' (by T11)."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 11."
::= { t11FcSpPoNaAuthProtEntry 1 }
t11FcSpPoNaAuthProtPartIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the value of an Attribute Protocol Parameters string
is shorter than 257 bytes, the whole value is contained in
one instance of t11FcSpPoNaAuthProtParams, and the value of
this object is 1. (This includes the case when the Attribute
Protocol Parameters string is zero bytes in length.)
If the value of an Authentication Protocol Parameters string
is longer than 256 bytes, then that value is divided up on
256-byte boundaries such that all parts are 256 bytes long
except the last part, which is shorter if necessary, with
each such part contained in a separate row of this table,
and the value of this object is set to the part number.
That is, this object has the value of 1 for bytes 0-255,
the value of 2 for bytes 256-511, etc."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoNaAuthProtEntry 2 }
t11FcSpPoNaAuthProtParams OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an Authentication Protocol Parameters string
is divided up on 256-byte boundaries such that all parts
are 256 bytes long except the last part, which is shorter
if necessary, and each such part is contained in a
separate instance of this object."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 5.3.2, table 10."
::= { t11FcSpPoNaAuthProtEntry 3 }
t11FcSpPoNaAuthProtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpPoNaAuthProtEntry 4 }Okay so the params string gets chopped into 256-byte chunks, one chunk per row, and the PartIndex is how you keep track of which chunk is which 🧚 Super neat, ngl.
Next up is the statistics part, where the policy server counts how many requests it got and how it responded 📊✨
--
-- Part 4 - Statistics
--
t11FcSpPoStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of statistics maintained by FC-SP Security
Policy Servers."
::= { t11FcSpPoStatistics 1 }
t11FcSpPoStatsEntry OBJECT-TYPE
SYNTAX T11FcSpPoStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of statistics for the FC-SP Security Policy Server on
the Fabric identified by the value of t11FcSpPoFabricIndex,
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoStatsTable 1 }
T11FcSpPoStatsEntry ::= SEQUENCE {
t11FcSpPoInRequests Counter32,
t11FcSpPoInAccepts Counter32,
t11FcSpPoInRejects Counter32
}
t11FcSpPoInRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FC-SP Policy Management Requests
(e.g., GPS, APS, etc.) received by this FC-SP
Security Policy Server on this Fabric.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 1 }
t11FcSpPoInAccepts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this FC-SP Security Policy Server
sent an Accept CT_IU on this Fabric in response to a
received FC-SP Policy Management Request (e.g., GPS, APS,
etc.).
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 2 }
t11FcSpPoInRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that this FC-SP Security Policy Server
sent a Reject CT_IU on this Fabric in response to a
received FC-SP Policy Management Request (e.g., GPS, APS,
etc.).
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3."
::= { t11FcSpPoStatsEntry 3 }Now we're in Part 5, which is all about control info and notifications 🔔 The control table is where the policy database gets its memory realization, and it's also where notifications get set up 💜
--
-- Part 5 - Control Information & Notifications
--
--
-- Control Information
--
t11FcSpPoServerAddress OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The WWN of the FC-SP Security Policy Server that
received a request that is referenced in a
notification."
::= { t11FcSpPoControl 1 }
t11FcSpPoControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpPoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control information, including the memory
realization of FC-SP Policy Databases, and concerning
the generation of notifications due to FC-SP
Policy-related events."
::= { t11FcSpPoControl 2 }
t11FcSpPoControlEntry OBJECT-TYPE
SYNTAX T11FcSpPoControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains control information specific to FC-SP
Policy and Policy-related events for the Fabric identified
by the value of t11FcSpPoFabricIndex, and managed within
the Fibre Channel management instance identified by
fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpPoFabricIndex }
::= { t11FcSpPoControlTable 1 }
T11FcSpPoControlEntry ::= SEQUENCE {
t11FcSpPoStorageType StorageType,
t11FcSpPoNotificationEnable TruthValue,
t11FcSpPoLastNotifyType INTEGER,
t11FcSpPoRequestSource FcNameIdOrZero,
t11FcSpPoReasonCode T11NsGs4RejectReasonCode,
t11FcSpPoCtCommandString OCTET STRING,
t11FcSpPoReasonCodeExp Unsigned32,
t11FcSpPoReasonVendorCode OCTET STRING
}
t11FcSpPoStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the memory realization of FC-SP
Policy Objects and related information for a particular
Fabric; specifically, for:
- rows created and/or modified for the particular
Fabric in these tables:
t11FcSpPoNaSummaryTable
t11FcSpPoNaSwListTable
t11FcSpPoNaSwMembTable
t11FcSpPoNaNoMembTable
t11FcSpPoNaCtDescrTable
t11FcSpPoNaSwConnTable
t11FcSpPoNaIpMgmtTable
t11FcSpPoNaWkpDescrTable
t11FcSpPoNaAttribTable
- the activate and deactivate actions invoked through
the t11FcSpPoOperActivate and t11FcSpPoOperDeActivate
objects for the particular Fabric; and
- modified information contained in the same row
as an instance of this object.
Even if an instance of this object has the value
'permanent(4)', none of the information defined in
this MIB module for the given Fabric needs to be
writable."
::= { t11FcSpPoControlEntry 1 }
t11FcSpPoNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the following types of
notifications:
t11FcSpPoNotifyActivation,
t11FcSpPoNotifyActivateFail,
t11FcSpPoNotifyDeactivation and
t11FcSpPoNotifyDeactivateFail
should be generated for this Fabric."
::= { t11FcSpPoControlEntry 2 }
t11FcSpPoLastNotifyType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
activation(2),
activateFail(3),
deactivation(4),
deactivateFail(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of which of the following types of
notification is currently being/was most recently
generated for the Fabric:
'activation' -- t11FcSpPoNotifyActivation
'activateFail' -- t11FcSpPoNotifyActivateFail
'deactivation' -- t11FcSpPoNotifyDeactivation
'deactivateFail' -- t11FcSpPoNotifyDeactivateFail
The value 'none' indicates that none of these types of
notifications have been generated since the last restart
of the network management system, and therefore that the
corresponding instances of: t11FcSpPoRequestSource,
t11FcSpPoReasonCode, t11FcSpPoCtCommandString,
t11FcSpPoReasonCodeExp, and
t11FcSpPoReasonVendorCode are irrelevant."
::= { t11FcSpPoControlEntry 3 }
t11FcSpPoRequestSource OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WWN of the source of the (Activate Policy Summary
or Deactivate Policy Summary) request for which the
current/most recent notification of the type indicated by
the corresponding instance of t11FcSpPoLastNotifyType
is being/was generated.
If no source is available, the value of this object is
the zero-length string."
DEFVAL { "" }
::= { t11FcSpPoControlEntry 4 }
t11FcSpPoReasonCode OBJECT-TYPE
SYNTAX T11NsGs4RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code associated with the failure that is
indicated when the value of the corresponding instance
of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, the value
of this object is 'none(1)'."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 5 }okay so the next object is t11FcSpPoCtCommandString, and it's the one that carries the actual rejected request 📦✨
t11FcSpPoCtCommandString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the failed request that is
indicated when the value of the corresponding instance of
t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'. The content of the request is formatted
as an octet string (in network byte order) containing the
CT_IU, as described in Table 2 of [FC-GS-5] (including the
preamble).
For other values of t11FcSpPoLastNotifyType, or if the
CT_IU's content is unavailable, the value of this object
is the zero-length string.
When the length of this object is 255 octets, it
contains the first 255 octets of the CT_IU (in
network-byte order)."
::= { t11FcSpPoControlEntry 6 }so basically this is the receipt 🧾 of the failed request. It's only filled in when t11FcSpPoLastNotifyType says 'activateFail' or 'deactivateFail'. For every other value, or if the CT_IU isn't available, it's just an empty zero-length string 🫧 And if it's exactly 255 octets long, that means you're only getting the first 255 octets of the CT_IU, which is a whole vibe on its own 💀
Next up is t11FcSpPoReasonCodeExp, which is the explanation behind the failure 🙈
t11FcSpPoReasonCodeExp OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code explanation associated with the failure
that is indicated when the value of the corresponding
instance of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, the value
of this object is zero."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 7 }It only matters for the two fail types. For anything else it's zero 🌸 It points back to sections 7.3.6.2 & 7.3.6.3 of [FC-SP], which I'm not gonna re-explain because it's giving "go read the source" 📚
Then there's t11FcSpPoReasonVendorCode, the vendor-specific bit 🦋
t11FcSpPoReasonVendorCode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0 | 1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor-specific reason code associated with the failure
that is indicated when the value of the corresponding
instance of t11FcSpPoLastNotifyType is 'activateFail' or
'deactivateFail'.
For other values of t11FcSpPoLastNotifyType, or if no
vendor-specific reason code is available, the value
of this object is the zero-length string."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2 & 7.3.6.3"
::= { t11FcSpPoControlEntry 8 }It's either zero or one octet long, and it's empty when there's no vendor code to show 💅 Same reference vibes as the one before it.
Now the notifications section, which is where the alerts live 🔔
--
-- Notification definitions
--
t11FcSpPoNotifyActivation NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoPolicySummaryObjName,
t11FcSpPoRequestSource }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security
Policy Server (indicated by the value of
t11FcSpPoServerAddress) successfully completes the
execution of an Activate Policy Summary request.
The value of t11FcSpPoRequestSource indicates
the source of the APS request. The value of
t11FcSpPoPolicySummaryObjName indicates the name of
the activated Policy Summary Object."
::= { t11FcSpPoMIBNotifications 1 }So t11FcSpPoNotifyActivation is the happy one 🎉 It goes off when a Security Policy Server finishes an Activate Policy Summary request successfully. It tells you which server did it, who sent the request, and the name of the Policy Summary Object that got activated. Iconic ✨
t11FcSpPoNotifyActivateFail NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security Policy
Server (indicated by the value of t11FcSpPoServerAddress)
fails to complete the execution of an Activate Policy
Summary request.
The value of t11FcSpPoCtCommandString indicates the
rejected request, and the values of t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
indicate the reason for the rejection. The value of
t11FcSpPoRequestSource indicates the source of the
request."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.2."
::= { t11FcSpPoMIBNotifications 2 }And this is the sad twin 😭 t11FcSpPoNotifyActivateFail fires when that same server fails to finish an Activate Policy Summary request. It packs in the rejected request, the reason code, its explanation, the vendor code, and who asked. The whole crime scene, basically 🔍
t11FcSpPoNotifyDeactivation NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security
Policy Server (indicated by the value of
t11FcSpPoServerAddress) successfully completes the
execution of a Deactivate Policy Summary request.
The value of t11FcSpPoRequestSource indicates
the source of the DPS request."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.3.6.3."
::= { t11FcSpPoMIBNotifications 3 }t11FcSpPoNotifyDeactivation is the successful-deactivation ping 🌈 It goes off when a server completes a Deactivate Policy Summary request, and it tells you who sent that DPS request. Simple and clean 🧚
t11FcSpPoNotifyDeactivateFail NOTIFICATION-TYPE
OBJECTS { t11FcSpPoServerAddress,
t11FcSpPoRequestSource,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode }
STATUS current
DESCRIPTION
"This notification is generated whenever a Security Policy
Server (indicated by the value of t11FcSpPoServerAddress)
fails to complete the execution of a Deactivate Policy
Summary request.
The value of t11FcSpPoCtCommandString indicates the
rejected request, and the values of t11FcSpPoReasonCode,
t11FcSpPoReasonCodeExp, and t11FcSpPoReasonVendorCode
indicate the reason for the rejection. The value of
t11FcSpPoRequestSource indicates the source of the
request."
::= { t11FcSpPoMIBNotifications 4 }Same energy as the activation failure, just for deactivation 💜 Same objects, same explanation of what each one tells you, and this one doesn't have a REFERENCE clause at all.
Last up is conformance, which is basically the checklist for who has to implement what 📋
--
-- Conformance
--
t11FcSpPoMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 1 }
t11FcSpPoMIBGroups OBJECT IDENTIFIER ::= { t11FcSpPoMIBConformance 2 }
t11FcSpPoMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
support the Fabric Policies defined in FC-SP,"
MODULE -- this module
MANDATORY-GROUPS { t11FcSpPoActiveObjectsGroup }
GROUP t11FcSpPoNonActiveObjectsGroup
DESCRIPTION
"These objects are mandatory for FC-SP Security Policy
Servers."
GROUP t11FcSpPoNotifyObjectsGroup
DESCRIPTION
"These objects are mandatory for FC-SP Security Policy
Servers."
GROUP t11FcSpPoNotificationGroup
DESCRIPTION
"These notifications are mandatory for FC-SP Security
Policy Servers."
GROUP t11FcSpPoOperationsObjectsGroup
DESCRIPTION
"These objects are mandatory only for FC-SP Security
Policy Servers that support the activation/deactivation
of policies via SNMP."
GROUP t11FcSpPoStatsObjectsGroup
DESCRIPTION
"These objects are optional."The compliance block is where the MANDATORY-GROUPS live 👑 t11FcSpPoActiveObjectsGroup is the one that's required across the board. The non-active objects, notify objects, and notification group are also mandatory, but only for FC-SP Security Policy Servers. The operations objects are only mandatory for servers that do activation and deactivation over SNMP, and the stats objects are optional 🫶
okay so this part is where the compliance rules get super strict about write access 💅 every single object in this MIB is read-only, bestie, no exceptions 🔒
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpPoOperActivate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoOperDeActivate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNotificationEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryPolicyNameType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryPolicyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryHashStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSummaryRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwListFabricName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwListRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembDomainID
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembPolicyDataRole
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembAuthBehaviour
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwMembRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembCtAccessIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaNoMembRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrGsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrGsSubType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaCtDescrRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwConnAllowedNameType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwConnAllowedName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaSwConnRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtWkpIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtAttribute
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaIpMgmtRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrFlags
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrWkpNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrDestPort
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaWkpDescrRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribValue
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAttribRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAuthProtParams
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT t11FcSpPoNaAuthProtRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { t11FcSpPoMIBCompliances 1 }next up are the units of conformance, which are basically the bundles of objects and notifications that you can implement as a group 🎀 the groups are where the real main character energy is, so let's go 🦋
-- Units of Conformance
t11FcSpPoActiveObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoPolicySummaryObjName,
t11FcSpPoAdminFabricName,
t11FcSpPoActivatedTimeStamp,
t11FcSpPoSummaryPolicyType,
t11FcSpPoSummaryHashFormat,
t11FcSpPoSummaryHashValue,
t11FcSpPoSwMembSwitchFlags,
t11FcSpPoSwMembDomainID,
t11FcSpPoSwMembPolicyDataRole,
t11FcSpPoSwMembAuthBehaviour,
t11FcSpPoSwMembAttribute,
t11FcSpPoNoMembFlags,
t11FcSpPoNoMembCtAccessIndex,
t11FcSpPoNoMembAttribute,
t11FcSpPoCtDescrFlags,
t11FcSpPoCtDescrGsType,
t11FcSpPoCtDescrGsSubType,
t11FcSpPoSwConnAllowedNameType,
t11FcSpPoSwConnAllowedName,
t11FcSpPoIpMgmtWkpIndex,
t11FcSpPoIpMgmtAttribute,
t11FcSpPoWkpDescrFlags,
t11FcSpPoWkpDescrWkpNumber,
t11FcSpPoWkpDescrDestPort,
t11FcSpPoAttribType,
t11FcSpPoAttribValue,
t11FcSpPoAttribExtension,
t11FcSpPoAuthProtParams
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain information
about active Policy Objects that express Fibre Channel
Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 1 }
t11FcSpPoOperationsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoOperActivate,
t11FcSpPoOperDeActivate,
t11FcSpPoOperResult,
t11FcSpPoOperFailCause
}
STATUS current
DESCRIPTION
"A collection of MIB objects that allow a new set of
Fibre Channel Security (FC-SP) policies to be activated
or an existing set to be deactivated."
::= { t11FcSpPoMIBGroups 2 }
t11FcSpPoNonActiveObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoStorageType,
t11FcSpPoNaSummaryPolicyNameType,
t11FcSpPoNaSummaryPolicyName,
t11FcSpPoNaSummaryHashStatus,
t11FcSpPoNaSummaryHashFormat,
t11FcSpPoNaSummaryHashValue,
t11FcSpPoNaSummaryRowStatus,
t11FcSpPoNaSwListFabricName,
t11FcSpPoNaSwListRowStatus,
t11FcSpPoNaSwMembFlags,
t11FcSpPoNaSwMembDomainID,
t11FcSpPoNaSwMembPolicyDataRole,
t11FcSpPoNaSwMembAuthBehaviour,
t11FcSpPoNaSwMembAttribute,
t11FcSpPoNaSwMembRowStatus,
t11FcSpPoNaNoMembFlags,
t11FcSpPoNaNoMembCtAccessIndex,
t11FcSpPoNaNoMembAttribute,
t11FcSpPoNaNoMembRowStatus,
t11FcSpPoNaCtDescrFlags,
t11FcSpPoNaCtDescrGsType,
t11FcSpPoNaCtDescrGsSubType,
t11FcSpPoNaCtDescrRowStatus,
t11FcSpPoNaSwConnAllowedNameType,
t11FcSpPoNaSwConnAllowedName,
t11FcSpPoNaSwConnRowStatus,
t11FcSpPoNaIpMgmtWkpIndex,
t11FcSpPoNaIpMgmtAttribute,
t11FcSpPoNaIpMgmtRowStatus,
t11FcSpPoNaWkpDescrFlags,
t11FcSpPoNaWkpDescrWkpNumber,
t11FcSpPoNaWkpDescrDestPort,
t11FcSpPoNaWkpDescrRowStatus,
t11FcSpPoNaAttribType,
t11FcSpPoNaAttribValue,
t11FcSpPoNaAttribExtension,
t11FcSpPoNaAttribRowStatus,
t11FcSpPoNaAuthProtParams,
t11FcSpPoNaAuthProtRowStatus
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain information
about non-active Policy Objects available for activation
in order to change Fibre Channel Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 3 }
t11FcSpPoStatsObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoInRequests,
t11FcSpPoInAccepts,
t11FcSpPoInRejects
}
STATUS current
DESCRIPTION
"A collection of MIB objects that contain statistics
that can be maintained by FC-SP Security Policy Servers."
::= { t11FcSpPoMIBGroups 4 }
t11FcSpPoNotifyObjectsGroup OBJECT-GROUP
OBJECTS { t11FcSpPoNotificationEnable,
t11FcSpPoServerAddress,
t11FcSpPoLastNotifyType,
t11FcSpPoRequestSource,
t11FcSpPoReasonCode,
t11FcSpPoCtCommandString,
t11FcSpPoReasonCodeExp,
t11FcSpPoReasonVendorCode
}
STATUS current
DESCRIPTION
"A collection of MIB objects to control the generation of
notifications concerning Fibre Channel Security (FC-SP)
policy, and to hold information contained in such
notifications."
::= { t11FcSpPoMIBGroups 5 }
t11FcSpPoNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpPoNotifyActivation,
t11FcSpPoNotifyActivateFail,
t11FcSpPoNotifyDeactivation,
t11FcSpPoNotifyDeactivateFail
}
STATUS current
DESCRIPTION
"A collection of notifications of events concerning
Fibre Channel Security (FC-SP) policy."
::= { t11FcSpPoMIBGroups 6 }
END6.5. The T11-FC-SP-SA-MIB Module 🧚
and now we're starting a whole new MIB module, the T11-FC-SP-SA-MIB, which is all about the security associations 🔐 it kicks off with a little header block, so here it is:
--*******************************************************************
-- FC-SP Security Associations
--
T11-FC-SP-SA-MIB DEFINITIONS ::= BEGINokay bestie, the import list comes first 🧚 it's where the module borrows everything it needs from other MIBs, so every name here is a little reference to another spec 💅
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, Counter32, Counter64, TimeTicks, Gauge32,
mib-2 FROM SNMPv2-SMI -- [RFC2578]
RowStatus, StorageType, AutonomousType, TimeStamp,
TruthValue FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
InterfaceIndex,
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
fcmInstanceIndex,
FcAddressIdOrZero FROM FC-MGMT-MIB -- [RFC4044]
T11FabricIndex FROM T11-TC-MIB -- [RFC4439]
T11FcSpType,
T11FcSpiIndex,
T11FcSpLifetimeLeft,
T11FcSpLifetimeLeftUnits,
T11FcSpSecurityProtocolId,
T11FcRoutingControl,
T11FcSaDirection,
T11FcSpPrecedence,
T11FcSpTransforms FROM T11-FC-SP-TC-MIB;the identity block is next, and it's giving full credits list energy ✨ The LAST-UPDATED date, the organisation story, and the contacts all live in here, and the DESCRIPTION is a full menu of the six parts of the module 🎀
t11FcSpSaMIB MODULE-IDENTITY
LAST-UPDATED "200808200000Z"
ORGANIZATION "This MIB module was developed through the
coordinated effort of two organizations:
T11 began the development and the IETF (in
the IMSS Working Group) finished it."
CONTACT-INFO
" Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
EMail: cds@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Email: kzm@cisco.com"
DESCRIPTION
"This MIB module specifies the management information
required to manage Security Associations established via
Fibre Channel's FC-SP specification.
The MIB module consists of six parts:
- a per-Fabric table, t11FcSpSaIfTable, of capabilities,
parameters, status information, and counters; the counters
include non-transient aggregates of per-SA transient
counters;
- three tables, t11FcSpSaPropTable, t11FcSpSaTSelPropTable,
and t11FcSpSaTransTable, specifying the proposals for an
FC-SP entity acting as an SA_Initiator to present to the
SA_Responder during the negotiation of Security
Associations. The same information is also used by an
FC-SP entity acting as an SA_Responder to decide what to
accept during the negotiation of Security Associations.
One of these tables, t11FcSpSaTransTable, is used not only
for information about security transforms to propose and
to accept, but also as agreed upon during the negotiation
of Security Associations;
- a table, t11FcSpSaTSelDrByTable, of Traffic Selectors
having the security action of 'drop' or 'bypass' to be
applied either to ingress traffic that is unprotected by
FC-SP, or to all egress traffic;
- four tables, t11FcSpSaPairTable, t11FcSpSaTSelNegInTable,
t11FcSpSaTSelNegOutTable, and t11FcSpSaTSelSpiTable,
containing information about active bidirectional pairs of
Security Associations; in particular, t11FcSpSaPairTable
has one row per active bidirectional SA pair,
t11FcSpSaTSelNegInTable and t11FcSpSaTSelNegOutTable
contain information on the Traffic Selectors negotiated on
the SAs, and the t11FcSpSaTSelSpiTable is an alternate
lookup table such that the Traffic Selector(s) in use on a
particular Security Association can be quickly determined
based on the (ingress) SPI value;
- a table, t11FcSpSaControlTable, of control and other
information concerning the generation of notifications for
events related to FC-SP Security Associations;
- one notification, t11FcSpSaNotifyAuthFailure, generated on
the occurrence of an Authentication failure for a received
FC-2 or CT_IU frame.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5324; see the RFC
itself for full legal notices."
REVISION "200808200000Z"
DESCRIPTION
"Initial version of this MIB module, published as RFC 5324."
::= { mib-2 179 }
t11FcSpSaMIBNotifications OBJECT IDENTIFIER ::= { t11FcSpSaMIB 0 }
t11FcSpSaMIBObjects OBJECT IDENTIFIER ::= { t11FcSpSaMIB 1 }
t11FcSpSaMIBConformance OBJECT IDENTIFIER ::= { t11FcSpSaMIB 2 }
t11FcSpSaBase OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 1 }
t11FcSpSaConfig OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 2 }
t11FcSpSaActive OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 3 }
t11FcSpSaControl OBJECT IDENTIFIER ::= { t11FcSpSaMIBObjects 4 }
--
-- Base-level Per-Fabric Information
--the base-level table is where the per-Fabric info lives, and the entry's INDEX is a whole trio: fcmInstanceIndex, t11FcSpSaIfIndex, and t11FcSpSaIfFabricIndex 🦋
t11FcSpSaIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per-Fabric information related to
FC-SP Security Associations."
::= { t11FcSpSaBase 1 }
t11FcSpSaIfEntry OBJECT-TYPE
SYNTAX T11FcSpSaIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information related to Security
Associations on a particular Fabric, and managed as part
of the Fibre Channel management instance identified by
fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex }
::= { t11FcSpSaIfTable 1 }
T11FcSpSaIfEntry ::= SEQUENCE {
t11FcSpSaIfIndex InterfaceIndexOrZero,
t11FcSpSaIfFabricIndex T11FabricIndex,
-- capabilities
t11FcSpSaIfEspHeaderCapab T11FcSpTransforms,
t11FcSpSaIfCTAuthCapab T11FcSpTransforms,
t11FcSpSaIfIKEv2Capab T11FcSpTransforms,
t11FcSpSaIfIkev2AuthCapab TruthValue,
-- parameters and status
t11FcSpSaIfStorageType StorageType,
t11FcSpSaIfReplayPrevention TruthValue,
t11FcSpSaIfReplayWindowSize Unsigned32,
t11FcSpSaIfDeadPeerDetections Counter32,
t11FcSpSaIfTerminateAllSas INTEGER,
-- summary frame counters
t11FcSpSaIfOutDrops Counter64,
t11FcSpSaIfOutBypasses Counter64,
t11FcSpSaIfOutProcesses Counter64,
t11FcSpSaIfOutUnMatcheds Counter64,
t11FcSpSaIfInUnprotUnmtchDrops Counter64,
-- aggregates of per-SA transient counters
t11FcSpSaIfInDetReplays Counter64,
t11FcSpSaIfInUnprotMtchDrops Counter64,
t11FcSpSaIfInBadXforms Counter64,
t11FcSpSaIfInGoodXforms Counter64,
t11FcSpSaIfInProtUnmtchs Counter64
}
t11FcSpSaIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object has a non-zero value to identify a particular
interface, or the value zero to indicate that the
information in this row applies to all (of the management
instance's) interfaces to the particular Fabric.
If any row has a non-zero value of t11FcSpSaIfIndex, then
all rows for the same Fibre Channel management instance must
also have a non-zero value of t11FcSpSaIfIndex and thereby
be specific to a particular interface.
As and when zero values of t11FcSpSaIfIndex are used in
this table, then they must also be used in each other
table that has t11FcSpSaIfIndex in its INDEX clause."
::= { t11FcSpSaIfEntry 1 }
t11FcSpSaIfFabricIndex OBJECT-TYPE
SYNTAX T11FabricIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
Fabric."
::= { t11FcSpSaIfEntry 2 }
t11FcSpSaIfEspHeaderCapab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface for ESP_Header protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.25."
::= { t11FcSpSaIfEntry 3 }
t11FcSpSaIfCTAuthCapab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface for CT_Authentication protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.25."
::= { t11FcSpSaIfEntry 4 }
t11FcSpSaIfIKEv2Capab OBJECT-TYPE
SYNTAX T11FcSpTransforms
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A list of the standardized transforms supported by this
entity on this interface with IKEv2 protection."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, Appendix A.3.1, tables A.23, A.24,
A.25, A.26."
::= { t11FcSpSaIfEntry 5 }
t11FcSpSaIfIkev2AuthCapab OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the entity is capable of
supporting the IKEv2-AUTH protocol on this interface, i.e.,
concatenation of Authentication and SA Management
Transactions, such that an SA Management Transaction is
used to perform both the authentication function and
SA management."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.7.2, and table A.27."
::= { t11FcSpSaIfEntry 6 }
t11FcSpSaIfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the memory realization of
information related to FC-SP Security Associations
for interface(s) to a particular Fabric; specifically,
for rows created and/or modified in these tables:
t11FcSpSaPropTable
t11FcSpSaTSelDrByTable
t11FcSpSaControlTable
and, for modified information contained in the same
row as an instance of this object.
Even if an instance of this object has the value
'permanent(4)', none of the information defined in
this MIB module for interface(s) to the given Fabric
need to be writable."
::= { t11FcSpSaIfEntry 7 }
t11FcSpSaIfReplayPrevention OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether anti-replay protection is
enabled for frame reception on this interface.
Note that the replay-protection mechanism in FC-SP is
conceptually similar to the corresponding mechanism in
IPsec ESP."
REFERENCE
"- IP Encapsulating Security Payload (ESP),
RFC 4303, December 2005, section 3.3.3."
::= { t11FcSpSaIfEntry 8 }and that's the whole vibe of this chunk: capabilities, status, counters, and a little nod to IPsec ESP replay protection 💅🔥 🌸
okay so this part is all about the Security Association interface counters and the proposal table, and the MIB text is very particular, so I'm keeping every line exactly as written 🦋
t11FcSpSaIfReplayWindowSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the replay window to be used when
anti-replay protection is enabled for frame reception
on this interface.
Note that the replay-protection mechanism in FC-SP is
conceptually similar to the corresponding mechanism in
IPsec ESP."
REFERENCE
"- IP Encapsulating Security Payload (ESP),
RFC 4303, December 2005, section 3.4.3."
::= { t11FcSpSaIfEntry 9 }
t11FcSpSaIfDeadPeerDetections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a dead peer condition has been
detected on this interface.
This counter has no discontinuities other than those
that all Counter32's have when sysUpTime=0."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 8.5.3.3."
::= { t11FcSpSaIfEntry 10 }
t11FcSpSaIfTerminateAllSas OBJECT-TYPE
SYNTAX INTEGER { noop(1), terminate(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'terminate' is a request to
terminate all outstanding Security Associations on this
interface.
When read, the value of this object is always 'noop'.
Setting this object to 'noop' has no effect."
::= { t11FcSpSaIfEntry 11 }
t11FcSpSaIfOutDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were dropped, instead
of being transmitted on this interface, because they matched
an active (at that time) Traffic Selector with an action of
'Drop'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 12 }
t11FcSpSaIfOutBypasses OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were transmitted
unchanged by FC-SP on this interface because they matched
an active (at that time) Traffic Selector with an action
of 'Bypass'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 13 }
t11FcSpSaIfOutProcesses OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output frames that were protected by FC-SP
before being transmitted on this interface because they
matched an active (at that time) Traffic Selector with an
action of 'Process'.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 14 }
t11FcSpSaIfOutUnMatcheds OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that were transmitted unchanged by
FC-SP on this interface because they did not match any
Traffic Selector active at that time.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 15 }
t11FcSpSaIfInUnprotUnmtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface that
were dropped because they were unprotected and did not
match any Traffic Selector active at that time.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 16 }
t11FcSpSaIfInDetReplays OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a replay has been detected on
a Security Association that is currently active or was
previously active on this interface. Note that a frame
that is discarded because it is 'behind' the window,
i.e., too old, is counted as a replay.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 17 }
t11FcSpSaIfInUnprotMtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a frame received on this
interface was dropped because it matched with a Traffic
Selector for a Security Association that was active at
the time of receipt but the frame was not protected as
negotiated for that Security Association.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 18 }
t11FcSpSaIfInBadXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a frame received on this
interface was dropped because of a failure of one of the
transforms negotiated for the Security Association on
which it was received.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 19 }
t11FcSpSaIfInGoodXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface on a
Security Association for which the transforms negotiated
for that Security Association were successfully applied,
and that matched a Traffic Selector for that Security
Association.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 20 }
t11FcSpSaIfInProtUnmtchs OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this interface that
were dropped because they did not match any of the Traffic
Selectors negotiated for the Security Association on which
they were received, even though the Security Association's
transforms were successfully applied.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaIfEntry 21 }
--
-- Proposals to present in Security Association negotiation
--
t11FcSpSaPropTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of proposals for an FC-SP entity acting as an
SA_Initiator to present to the SA_Responder during the
negotiation of Security Associations. This information
is also used by an FC-SP entity acting as an SA_Responder
to decide what to accept during the negotiation of
Security Associations."
::= { t11FcSpSaConfig 1 }
t11FcSpSaPropEntry OBJECT-TYPE
SYNTAX T11FcSpSaPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one proposal for
the FC-SP entity to present, or what to accept, during
the negotiation of Security Associations on one or more
interfaces (identified by t11FcSpSaIfIndex) to a
particular Fabric (identified by t11FcSpSaIfFabricIndex),
and managed as part of the Fibre Channel management
instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex,
t11FcSpSaPropIndex }
::= { t11FcSpSaPropTable 1 }
T11FcSpSaPropEntry ::= SEQUENCE {
t11FcSpSaPropIndex Unsigned32,
t11FcSpSaPropSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaPropTSelListIndex Unsigned32,
t11FcSpSaPropTransListIndex Unsigned32,
t11FcSpSaPropAcceptAlgorithm INTEGER,
t11FcSpSaPropOutMatchSucceeds Counter64,
t11FcSpSaPropRowStatus RowStatus
}
t11FcSpSaPropIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
proposal for use on one or more interfaces to a Fabric."
::= { t11FcSpSaPropEntry 1 }
t11FcSpSaPropSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Protocol identifier for this proposal, i.e.,
whether the proposal is for traffic to be protected using
ESP_Header or CT_Authentication."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
::= { t11FcSpSaPropEntry 2 }
t11FcSpSaPropTSelListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it points
to the proposal's list of Traffic Selectors. The value
must be non-zero in an active row of this table.
The identified list is represented by all rows in the
t11FcSpSaTSelPropTable for which t11FcSpSaTSelPropListIndex
has the same value as this object (and with corresponding
values of t11FcSpSaIfIndex and fcmInstanceIndex)."
::= { t11FcSpSaPropEntry 3 }
t11FcSpSaPropTransListIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is non-zero, it points to
the proposal's list of Transforms. The value must be
non-zero in an active row of this table.
The identified list is represented by all rows in the
t11FcSpSaTransTable for which t11FcSpSaTransListIndex
has the same value as this object (and with corresponding
values of t11FcSpSaIfIndex and fcmInstanceIndex)."
::= { t11FcSpSaPropEntry 4 }Okay bestie, the AcceptAlgorithm object is where the responder picks how to answer the initiator's traffic selectors 🦋
t11FcSpSaPropAcceptAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
intersection(1),
union(2),
other(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The algorithm by which an SA_Responder in an SA negotiation
decides on which Traffic Selectors to specify in a response
to an IKE_Create_Child_SA request. This algorithm is used
when the Traffic Selectors specified by an SA_Initiator in
an IKE_Create_Child_SA request overlap with this proposal's
list of Traffic Selectors:
intersection(1) - the SA_Responder specifies the largest
subset of what the SA_Initiator proposed,
which is also a subset of this proposal's
Traffic Selectors.
union(2) - the SA_Responder specifies the smallest
superset of what the SA_Initiator proposed,
which is also a superset of this proposal's
Traffic Selectors.
other(3) - the SA_Responder uses some other algorithm.
"
::= { t11FcSpSaPropEntry 5 }
t11FcSpSaPropOutMatchSucceeds OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of egress frames that have matched a Traffic
Selector that was negotiated to select traffic for an
SA based on this proposal being accepted.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPropEntry 6 }
t11FcSpSaPropRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row. Values of object instances
within an active row can be modified at any time.
The status cannot be set to 'active' unless and
until the instances of t11FcSpSaPropTSelListIndex
and t11FcSpSaPropTransListIndex in the row have
been set to point to active rows in the
t11FcSpSaTSelPropTable and t11FcSpSaTransTable
tables, respectively. A row in this table is
deleted if the active rows it points to are deleted."
::= { t11FcSpSaPropEntry 7 }Next up is the Traffic Selector Proposals bit, and this is where the good stuff lives ✨ The table is where you define which frames get matched, using source and destination IDs, R_CTL values and types 💅
--
-- Traffic Selector Proposals
--
t11FcSpSaTSelPropTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about Traffic Selectors
to propose and/or to accept during the negotiation of
Security Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaConfig 2 }
t11FcSpSaTSelPropEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelPropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one Traffic
Selector within a list of Traffic Selectors to propose,
or for use in determining what to accept during Security
Association negotiation.
One such list is configured for use on a Fabric by
configuring the list's value of t11FcSpSaTSelPropListIndex
as the value of an instance of t11FcSpSaPropTSelListIndex,
for corresponding values of t11FcSpSaIfIndex and
fcmInstanceIndex. Further, the proposing and accepting
of Traffic Selectors is only done as a part of a proposal
specified by a row of the t11FcSpSaPropTable, i.e.,
in combination with the proposing and accepting of security
transforms as specified by the combination of
t11FcSpSaPropTSelListIndex and t11FcSpSaPropTransListIndex
in one row of the t11FcSpSaPropTable.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaTSelPropStorageType in that row."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaTSelPropListIndex, t11FcSpSaTSelPropPrecedence }
::= { t11FcSpSaTSelPropTable 1 }
T11FcSpSaTSelPropEntry ::= SEQUENCE {
t11FcSpSaTSelPropListIndex Unsigned32,
t11FcSpSaTSelPropPrecedence T11FcSpPrecedence,
t11FcSpSaTSelPropDirection T11FcSaDirection,
t11FcSpSaTSelPropStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelPropEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelPropStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelPropEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelPropStartRCtl T11FcRoutingControl,
t11FcSpSaTSelPropEndRCtl T11FcRoutingControl,
t11FcSpSaTSelPropStartType T11FcSpType,
t11FcSpSaTSelPropEndType T11FcSpType,
t11FcSpSaTSelPropStorageType StorageType,
t11FcSpSaTSelPropRowStatus RowStatus
}
t11FcSpSaTSelPropListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that identifies a particular list of
Traffic Selectors."
::= { t11FcSpSaTSelPropEntry 1 }
t11FcSpSaTSelPropPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. Each
Traffic Selector within a particular list of
Traffic Selectors must have a different precedence.
If an egress frame matches multiple Traffic Selectors,
it should be transmitted on the SA associated with the
Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelPropEntry 2 }
t11FcSpSaTSelPropDirection OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of whether this Traffic Selector is
to be proposed for ingress or egress traffic."
DEFVAL { egress }
::= { t11FcSpSaTSelPropEntry 3 }
t11FcSpSaTSelPropStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelPropEntry 4 }
t11FcSpSaTSelPropEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelPropEntry 5 }
t11FcSpSaTSelPropStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelPropEntry 6 }
t11FcSpSaTSelPropEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelPropEntry 7 }
t11FcSpSaTSelPropStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '00'h }
::= { t11FcSpSaTSelPropEntry 8 }
t11FcSpSaTSelPropEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FF'h }
::= { t11FcSpSaTSelPropEntry 9 }
t11FcSpSaTSelPropStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { '0000'h }
::= { t11FcSpSaTSelPropEntry 10 }
t11FcSpSaTSelPropEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.4.5."
DEFVAL { 'FFFF'h }
::= { t11FcSpSaTSelPropEntry 11 }
t11FcSpSaTSelPropStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the memory realization of
the information in this row.
Even if an instance of this object has the value
'permanent(4)', none of the information in its row
needs to be writable."
::= { t11FcSpSaTSelPropEntry 12 }
t11FcSpSaTSelPropRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpSaTSelPropEntry 13 }Last bit of this part: the Transform Proposals section kicks off with the transform table, and the rest of it continues next time 🌸
--
-- Transform Proposals
--
t11FcSpSaTransTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about security transforms
to propose, to accept and/or agreed upon during the
negotiation of Security Associations."
::= { t11FcSpSaConfig 3 }okay bestie, the transform table is where the actual security recipes live 🎀 each row is one proposal, and the whole table only comes into play when a proposal from a Traffic Selector and transform list pair gets used 💅
t11FcSpSaTransEntry OBJECT-TYPE
SYNTAX T11FcSpSaTransEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one proposal within a
list of security transforms to be proposed, to be accepted,
or already agreed upon, for use on a pair of Security
Associations on one or more interfaces (identified by
t11FcSpSaIfIndex), managed as part of the Fibre Channel
management instance identified by fcmInstanceIndex.
One such list is configured to be proposed or accepted for
use on a Fabric, by having the list's value of
t11FcSpSaTransListIndex be the value of an instance of
t11FcSpSaPropTransListIndex for that Fabric. Further,
the proposing and accepting of security transforms is only
done as a part of a proposal specified by a row of the
t11FcSpSaPropTable, i.e., in combination with the proposing
and accepting of Traffic Selectors as specified by the
combination of t11FcSpSaPropTSelListIndex and
t11FcSpSaPropTransListIndex in one row of the
t11FcSpSaPropTable.
The security (encryption and integrity) transform in use on
an SA pair is indicated by having the pair's values of
t11FcSpSaPairTransListIndex and t11FcSpSaPairTransIndex
contain the values of t11FcSpSaTransListIndex and
t11FcSpSaTransIndex for the transform's row in this table.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaTransStorageType in that row."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaTransListIndex, t11FcSpSaTransIndex }
::= { t11FcSpSaTransTable 1 }
T11FcSpSaTransEntry ::= SEQUENCE {
t11FcSpSaTransListIndex Unsigned32,
t11FcSpSaTransIndex Unsigned32,
t11FcSpSaTransSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaTransEncryptAlg AutonomousType,
t11FcSpSaTransEncryptKeyLen Unsigned32,
t11FcSpSaTransIntegrityAlg AutonomousType,
t11FcSpSaTransStorageType StorageType,
t11FcSpSaTransRowStatus RowStatus
}Each row is one transform in a list, and it's indexed by the Fibre Channel management instance, the interface, the list index and the transform index 🦋 A transform list gets attached to a Fabric through the proposal table, and an SA pair points back to a transform by using its list index and transform index ✨
t11FcSpSaTransListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies a particular
list of security transforms to be proposed, to be accepted,
or already agreed upon."
::= { t11FcSpSaTransEntry 1 }
t11FcSpSaTransIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies one security
transform within a list identified by
t11FcSpSaTransListIndex."
::= { t11FcSpSaTransEntry 2 }
t11FcSpSaTransSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Security Protocol identifier that indicates
whether this transform is for traffic to be protected
using ESP_Header or using CT_Authentication."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.2 and table 67."
::= { t11FcSpSaTransEntry 3 }
t11FcSpSaTransEncryptAlg OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Encryption Algorithm for this transform."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.3 and tables 69 & 70."
::= { t11FcSpSaTransEntry 4 }
t11FcSpSaTransEncryptKeyLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The key length in bits to be used with an encryption
algorithm that has a variable length key. This object
is ignored when the corresponding instance of
t11FcSpSaTransEncryptAlg specifies an algorithm with a
fixed length key."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.5 and table 77."
::= { t11FcSpSaTransEntry 5 }
t11FcSpSaTransIntegrityAlg OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Integrity Algorithm for this transform."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 6.3.2.3 and tables 69 & 72."
::= { t11FcSpSaTransEntry 6 }
t11FcSpSaTransStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the memory realization of
the information in this row.
Even if an instance of this object has the value
'permanent(4)', none of the information in its row
needs to be writable."
::= { t11FcSpSaTransEntry 7 }
t11FcSpSaTransRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
When an instance of t11FcSpSaPairTransListIndex points to
a row in this table, values of object instances in the row
cannot be modified nor can the row be deleted. Otherwise,
a row can be modified or deleted at any time."
::= { t11FcSpSaTransEntry 8 }The objects in this row are the protocol ID (ESP_Header or CT_Authentication), the encryption algorithm, the key length, and the integrity algorithm 🔥 The key length only matters for variable length keys, so it gets ignored for fixed ones, which is very on brand for it 🙈 The row status is the lock: once an SA pair is pointing at a row, that row is frozen and can't be edited or deleted 🔒
-- -- Traffic Selectors for Drop & Bypass --
t11FcSpSaTSelDrByTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelDrByEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Traffic Selectors to select which
traffic is to be dropped or is to bypass further
security processing."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaConfig 4 }
t11FcSpSaTSelDrByEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelDrByEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents one Traffic Selector having the
security action of 'drop' or 'bypass', which is applied
based on a precedence value, either to ingress traffic
that is unprotected by FC-SP, or to all egress
traffic on one or more interfaces (identified by
t11FcSpSaIfIndex) to a particular Fabric (identified
by t11FcSpSaIfFabricIndex), and managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex, t11FcSpSaIfFabricIndex,
t11FcSpSaTSelDrByDirection, t11FcSpSaTSelDrByPrecedence }
::= { t11FcSpSaTSelDrByTable 1 }
T11FcSpSaTSelDrByEntry ::= SEQUENCE {
t11FcSpSaTSelDrByDirection T11FcSaDirection,
t11FcSpSaTSelDrByPrecedence T11FcSpPrecedence,
t11FcSpSaTSelDrByAction INTEGER,
t11FcSpSaTSelDrByStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelDrByStartRCtl T11FcRoutingControl,
t11FcSpSaTSelDrByEndRCtl T11FcRoutingControl,
t11FcSpSaTSelDrByStartType T11FcSpType,
t11FcSpSaTSelDrByEndType T11FcSpType,
t11FcSpSaTSelDrByMatches Counter64,
t11FcSpSaTSelDrByRowStatus RowStatus
}
t11FcSpSaTSelDrByDirection OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of whether this Traffic Selector is
for ingress or egress traffic."
::= { t11FcSpSaTSelDrByEntry 1 }
t11FcSpSaTSelDrByPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. If and when a
frame is compared against multiple Traffic Selectors, and
multiple of them have a match with the frame, the security
action to be taken for the frame is that specified for the
matching Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelDrByEntry 2 }
t11FcSpSaTSelDrByAction OBJECT-TYPE
SYNTAX INTEGER { drop(1), bypass(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The security action to be taken for a frame that
matches this Traffic Selector."
DEFVAL { drop }
::= { t11FcSpSaTSelDrByEntry 3 }
t11FcSpSaTSelDrByStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelDrByEntry 4 }
t11FcSpSaTSelDrByEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelDrByEntry 5 }
t11FcSpSaTSelDrByStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
DEFVAL { '000000'h }
::= { t11FcSpSaTSelDrByEntry 6 }
t11FcSpSaTSelDrByEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
DEFVAL { 'FFFFFF'h }
::= { t11FcSpSaTSelDrByEntry 7 }
t11FcSpSaTSelDrByStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
DEFVAL { '00'h }
::= { t11FcSpSaTSelDrByEntry 8 }
t11FcSpSaTSelDrByEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
DEFVAL { 'FF'h }
::= { t11FcSpSaTSelDrByEntry 9 }Okay bestie, the Traffic Selector drop rules are giving us the first set of type ranges ✨ these define which frame types a selector matches, from the smallest value up to the largest 💅
t11FcSpSaTSelDrByStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
DEFVAL { '0000'h }
::= { t11FcSpSaTSelDrByEntry 10 }
t11FcSpSaTSelDrByEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
DEFVAL { 'FFFF'h }
::= { t11FcSpSaTSelDrByEntry 11 }
t11FcSpSaTSelDrByMatches OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames for which the action specified by
the corresponding instance of t11FcSpSaTSelDrByAction was
taken because of a match with this Traffic Selector.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaTSelDrByEntry 12 }
t11FcSpSaTSelDrByRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. Values of object instances
within the row can be modified at any time."
::= { t11FcSpSaTSelDrByEntry 13 }
--
-- Active Security Associations
--
t11FcSpSaPairTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about active
bidirectional pairs of Security Associations."
::= { t11FcSpSaActive 1 }
t11FcSpSaPairEntry OBJECT-TYPE
SYNTAX T11FcSpSaPairEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one active
bidirectional pair of Security Associations on an
interface to a particular Fabric (identified by
t11FcSpSaIfFabricIndex), managed as part of the Fibre
Channel management instance identified by
fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaPairInboundSpi }
::= { t11FcSpSaPairTable 1 }
T11FcSpSaPairEntry ::= SEQUENCE {
t11FcSpSaPairIfIndex InterfaceIndex,
t11FcSpSaPairInboundSpi T11FcSpiIndex,
t11FcSpSaPairSecurityProt T11FcSpSecurityProtocolId,
t11FcSpSaPairTransListIndex Unsigned32,
t11FcSpSaPairTransIndex Unsigned32,
t11FcSpSaPairLifetimeLeft T11FcSpLifetimeLeft,
t11FcSpSaPairLifetimeLeftUnits T11FcSpLifetimeLeftUnits,
t11FcSpSaPairTerminate INTEGER,
t11FcSpSaPairInProtUnMatchs Counter64,
t11FcSpSaPairInDetReplays Counter64,
t11FcSpSaPairInBadXforms Counter64,
t11FcSpSaPairInGoodXforms Counter64
}
t11FcSpSaPairIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the interface to the particular
Fabric on which this SA pair is active."
::= { t11FcSpSaPairEntry 1 }
t11FcSpSaPairInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SPI value that is used to indicate that an incoming
frame was received on the ingress SA of this SA pair."
::= { t11FcSpSaPairEntry 2 }
t11FcSpSaPairSecurityProt OBJECT-TYPE
SYNTAX T11FcSpSecurityProtocolId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether this SA uses ESP_Header to
protect FC-2 frames, or CT_Authentication to protect Common
Transport Information Units (CT_IUs)."
::= { t11FcSpSaPairEntry 3 }
t11FcSpSaPairTransListIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of this value and the value of the
corresponding instance of t11FcSpSaPairTransIndex
identify the row in the t11FcSpSaTransTable that
contains the transforms that are in use on this SA pair."
::= { t11FcSpSaPairEntry 4 }
t11FcSpSaPairTransIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The combination of this value and the value of the
corresponding instance of t11FcSpSaPairTransListIndex
identify the row in the t11FcSpSaTransTable that
contains the transforms that are in use on this SA pair."
::= { t11FcSpSaPairEntry 5 }
t11FcSpSaPairLifetimeLeft OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeft
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining lifetime of this SA pair, given in the
units specified by the value of the corresponding
instance of t11FcSpSaPairLifetimeLeft."
::= { t11FcSpSaPairEntry 6 }
t11FcSpSaPairLifetimeLeftUnits OBJECT-TYPE
SYNTAX T11FcSpLifetimeLeftUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The units in which the value of the corresponding
instance of t11FcSpSaPairLifetimeLeft specifies the
remaining lifetime of this SA pair."
::= { t11FcSpSaPairEntry 7 }
t11FcSpSaPairTerminate OBJECT-TYPE
SYNTAX INTEGER { noop(1), terminate(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'terminate' is a request
to terminate this pair of Security Associations.
When read, the value of this object is always 'noop'.
Setting this object to 'noop' has no effect."
::= { t11FcSpSaPairEntry 8 }
t11FcSpSaPairInProtUnMatchs OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this SA for which the
SA's transforms were successfully applied to the frame,
but the frame was still dropped because it did not match
any of the SA's ingress Traffic Selectors.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 9 }
t11FcSpSaPairInDetReplays OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a replay has been detected on
this Security Association. Note that a frame that is
discarded because it is 'behind' the window, i.e., too old,
is counted as a replay.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 10 }
t11FcSpSaPairInBadXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a received frame was dropped
because one of the transforms negotiated for this Security
Association failed.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 11 }
t11FcSpSaPairInGoodXforms OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames for which the transforms
negotiated for this Security Association, were
successfully applied.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaPairEntry 12 }
--
-- Negotiated Ingress Traffic Selectors
--
t11FcSpSaTSelNegInTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelNegInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about ingress Traffic
Selectors that are in use on active Security
Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaActive 2 }
t11FcSpSaTSelNegInEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelNegInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one ingress Traffic
Selector that is in use on an active Security Association
on an interface (identified by t11FcSpSaPairIfIndex) to
a particular Fabric (identified by t11FcSpSaIfFabricIndex),
managed as part of the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegInIndex }
::= { t11FcSpSaTSelNegInTable 1 }
T11FcSpSaTSelNegInEntry ::= SEQUENCE {
t11FcSpSaTSelNegInIndex Unsigned32,
t11FcSpSaTSelNegInInboundSpi T11FcSpiIndex,
t11FcSpSaTSelNegInStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegInStartRCtl T11FcRoutingControl,
t11FcSpSaTSelNegInEndRCtl T11FcRoutingControl,
t11FcSpSaTSelNegInStartType T11FcSpType,
t11FcSpSaTSelNegInEndType T11FcSpType,
t11FcSpSaTSelNegInUnpMtchDrops Counter64
}
t11FcSpSaTSelNegInIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value to distinguish an ingress Traffic Selector
from all others currently in use by Security Associations
on the same interface to a particular Fabric."
::= { t11FcSpSaTSelNegInEntry 1 }
t11FcSpSaTSelNegInInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the ingress SA on which this Traffic Selector
is in use.
This value can be used to find the SA pair's row in the
t11FcSpSaPairTable."
::= { t11FcSpSaTSelNegInEntry 2 }
t11FcSpSaTSelNegInStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 3 }
t11FcSpSaTSelNegInEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 4 }
t11FcSpSaTSelNegInStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 5 }okay bestie, the ingress selector ranges keep going and the egress ones are literally the main character now 💅✨
t11FcSpSaTSelNegInEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 6 }
t11FcSpSaTSelNegInStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 7 }
t11FcSpSaTSelNegInEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegInEntry 8 }
t11FcSpSaTSelNegInStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 9 }
t11FcSpSaTSelNegInEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegInEntry 10 }
t11FcSpSaTSelNegInUnpMtchDrops OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that a received frame was dropped
because it matched with this Traffic Selector but the
frame was not protected as negotiated for the Security
Association identified by t11FcSpSaTSelNegInInboundSpi.
This counter has no discontinuities other than those
that all Counter64's have when sysUpTime=0."
::= { t11FcSpSaTSelNegInEntry 11 }
--
-- Negotiated Egress Traffic Selectors
--
t11FcSpSaTSelNegOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelNegOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about egress Traffic
Selectors that are in use on active Security
Associations."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, sections 4.6, 4.7, and 6.4.5.
- Use of IKEv2 in FC-SP, RFC 4595,
July 2006, section 4.4."
::= { t11FcSpSaActive 3 }
t11FcSpSaTSelNegOutEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelNegOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about one egress Traffic
Selector that is in use on an active Security Association
on an interface (identified by t11FcSpSaPairIfIndex) to
a particular Fabric (identified by t11FcSpSaIfFabricIndex),
managed as part of the Fibre Channel management instance
identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex, t11FcSpSaTSelNegOutPrecedence }
::= { t11FcSpSaTSelNegOutTable 1 }
T11FcSpSaTSelNegOutEntry ::= SEQUENCE {
t11FcSpSaTSelNegOutPrecedence T11FcSpPrecedence,
t11FcSpSaTSelNegOutInboundSpi T11FcSpiIndex,
t11FcSpSaTSelNegOutStartSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutEndSrcAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutStartDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutEndDstAddr FcAddressIdOrZero,
t11FcSpSaTSelNegOutStartRCtl T11FcRoutingControl,
t11FcSpSaTSelNegOutEndRCtl T11FcRoutingControl,
t11FcSpSaTSelNegOutStartType T11FcSpType,
t11FcSpSaTSelNegOutEndType T11FcSpType
}
t11FcSpSaTSelNegOutPrecedence OBJECT-TYPE
SYNTAX T11FcSpPrecedence
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The precedence of this Traffic Selector. If and when a
frame is compared against multiple Traffic Selectors, and
multiple of them have a match with the frame, the security
action to be taken for the frame is that specified for the
matching Traffic Selector having the numerically smallest
precedence value."
::= { t11FcSpSaTSelNegOutEntry 1 }
t11FcSpSaTSelNegOutInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the ingress SA of the SA pair for which this
Traffic Selector is in use on the egress SA.
This value can be used to find the SA pair's row in the
t11FcSpSaPairTable."
::= { t11FcSpSaTSelNegOutEntry 2 }
t11FcSpSaTSelNegOutStartSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 3 }
t11FcSpSaTSelNegOutEndSrcAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a source address
(S_ID) of a frame that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 4 }
t11FcSpSaTSelNegOutStartDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 5 }
t11FcSpSaTSelNegOutEndDstAddr OBJECT-TYPE
SYNTAX FcAddressIdOrZero (SIZE (3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 24-bit value of a destination
address (D_ID) of a frame that will match with this
Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 6 }
t11FcSpSaTSelNegOutStartRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 7 }
t11FcSpSaTSelNegOutEndRCtl OBJECT-TYPE
SYNTAX T11FcRoutingControl
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest 8-bit value contained within a
Routing Control (R_CTL) field of a frame that will match
with this Traffic Selector."
::= { t11FcSpSaTSelNegOutEntry 8 }
t11FcSpSaTSelNegOutStartType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically smallest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 9 }
t11FcSpSaTSelNegOutEndType OBJECT-TYPE
SYNTAX T11FcSpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The numerically largest of a range of possible 'type'
values of frames that will match with this Traffic
Selector."
::= { t11FcSpSaTSelNegOutEntry 10 }
--
-- Traffic Selectors index-ed by SPI
--
t11FcSpSaTSelSpiTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaTSelSpiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table identifying the Traffic Selectors in use on
particular Security Associations, INDEX-ed by their
(ingress) SPI values."
::= { t11FcSpSaActive 4 }
t11FcSpSaTSelSpiEntry OBJECT-TYPE
SYNTAX T11FcSpSaTSelSpiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry identifies one Traffic Selector in use on an SA
pair on the interface (identified by t11FcSpSaPairIfIndex)
to a particular Fabric (identified by
t11FcSpSaIfFabricIndex), and managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex."
INDEX { fcmInstanceIndex, t11FcSpSaPairIfIndex,
t11FcSpSaIfFabricIndex,
t11FcSpSaTSelSpiInboundSpi, t11FcSpSaTSelSpiTrafSelIndex }
::= { t11FcSpSaTSelSpiTable 1 }
T11FcSpSaTSelSpiEntry ::= SEQUENCE {
t11FcSpSaTSelSpiInboundSpi T11FcSpiIndex,
t11FcSpSaTSelSpiTrafSelIndex Unsigned32,
t11FcSpSaTSelSpiDirection T11FcSaDirection,
t11FcSpSaTSelSpiTrafSelPtr Unsigned32
}
t11FcSpSaTSelSpiInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An SPI value that identifies the ingress Security
Association of a particular SA pair."
::= { t11FcSpSaTSelSpiEntry 1 }
t11FcSpSaTSelSpiTrafSelIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that distinguishes between the
(potentially multiple) Traffic Selectors in use on
this Security Association pair."
::= { t11FcSpSaTSelSpiEntry 2 }
t11FcSpSaTSelSpiDirection OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this Traffic Selector
is being used for ingress or for egress traffic."
::= { t11FcSpSaTSelSpiEntry 3 }
t11FcSpSaTSelSpiTrafSelPtr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a pointer into another table that
can be used to obtain more information about this Traffic
Selector.
If the corresponding instance of t11FcSpSaTSelSpiDirection
has the value 'egress', then this object contains the
value of t11FcSpSaTSelNegOutPrecedence in the row of
t11FcSpSaTSelNegOutTable, which contains more information.
If the corresponding instance of t11FcSpSaTSelSpiDirection
has the value 'ingress', then this object contains the
value of t11FcSpSaTSelNegInIndex that identifies the row
in t11FcSpSaTSelNegInTable containing more information."
::= { t11FcSpSaTSelSpiEntry 4 }
--
-- Notification information & control
--
t11FcSpSaControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF T11FcSpSaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of control and other information concerning
the generation of notifications for events related
to FC-SP Security Associations."
::= { t11FcSpSaControl 1 }more of the MIB is coming, so stay tuned, bestie 🎀💖
Okay bestie, the control entry is where it gets spicy 🌶️💅 The table row is keyed by fcmInstanceIndex, t11FcSpSaIfIndex, and t11FcSpSaIfFabricIndex, and its storage type comes from t11FcSpSaIfStorageType. 🦋
t11FcSpSaControlEntry OBJECT-TYPE
SYNTAX T11FcSpSaControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry identifies information for the one or more
interfaces (identified by t11FcSpSaIfIndex) to a
particular Fabric (identified by t11FcSpSaIfFabricIndex),
and managed as part of the Fibre Channel management
instance identified by fcmInstanceIndex.
The StorageType of a row in this table is specified by
the instance of t11FcSpSaIfStorageType that is INDEX-ed
by the same values of fcmInstanceIndex, t11FcSpSaIfIndex,
and t11FcSpSaIfFabricIndex."
INDEX { fcmInstanceIndex, t11FcSpSaIfIndex,
t11FcSpSaIfFabricIndex }
::= { t11FcSpSaControlTable 1 }
T11FcSpSaControlEntry ::= SEQUENCE {
t11FcSpSaControlAuthFailEnable TruthValue,
t11FcSpSaControlInboundSpi T11FcSpiIndex,
t11FcSpSaControlSource FcAddressIdOrZero,
t11FcSpSaControlDestination FcAddressIdOrZero,
t11FcSpSaControlFrame OCTET STRING,
t11FcSpSaControlElapsed TimeTicks,
t11FcSpSaControlSuppressed Gauge32,
t11FcSpSaControlWindow Unsigned32,
t11FcSpSaControlMaxNotifs Unsigned32,
t11FcSpSaControlLifeExcdEnable TruthValue,
t11FcSpSaControlLifeExcdSpi T11FcSpiIndex,
t11FcSpSaControlLifeExcdDir T11FcSaDirection,
t11FcSpSaControlLifeExcdTime TimeStamp
}Now the auth-fail knobs 🔐✨ This one is a read-write switch that decides whether a t11FcSpSaNotifyAuthFailure gets generated for the first auth failure in a time window on a Fabric. Main character energy 👑
t11FcSpSaControlAuthFailEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a t11FcSpSaNotifyAuthFailure
notification should be generated for the first occurrence
of an Authentication failure within a time window for this
Fabric."
::= { t11FcSpSaControlEntry 1 }
t11FcSpSaControlInboundSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI value of the ingress Security Association on
which was received the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is zero."
::= { t11FcSpSaControlEntry 2 }
t11FcSpSaControlSource OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The S_ID contained in the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 3 }
t11FcSpSaControlDestination OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The D_ID contained in the last frame for which a
t11FcSpSaNotifyAuthFailure was generated.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 4 }
t11FcSpSaControlFrame OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binary content of the last frame for which a
t11FcSpSaNotifyAuthFailure was generated. If more than
256 bytes of the frame are available, then this object
contains the first 256 bytes. If less than 256 bytes of
the frame are available, then this object contains the
first N bytes, where N is greater or equal to zero.
If no t11FcSpSaNotifyAuthFailure notifications have
been generated, the value of this object is the
zero-length string."
::= { t11FcSpSaControlEntry 5 }
t11FcSpSaControlElapsed OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time since the last generation of a
t11FcSpSaNotifyAuthFailure notification on the same
Fabric, or the value of sysUpTime if no
t11FcSpSaNotifyAuthFailure notifications have been
generated since the last restart."
::= { t11FcSpSaControlEntry 6 }
t11FcSpSaControlSuppressed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences of an Authentication failure
on a Fabric that were suppressed because they occurred
on the same Fabric within the same time window as a
previous Authentication failure for which a
t11FcSpSaNotifyAuthFailure notification was generated.
The value of this object is reset to zero on a restart
of the network management subsystem, and whenever a
t11FcSpSaNotifyAuthFailure notification is generated.
In the event that the value of this object reaches its
maximum value, it remains at that value until it is
reset on the generation of the next
t11FcSpSaNotifyAuthFailure notification."
::= { t11FcSpSaControlEntry 7 }
t11FcSpSaControlWindow OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of a time window that begins when a
t11FcSpSaNotifyAuthFailure notification is generated for
any Security Association on a particular Fabric. For the
duration of the time window, further Authentication failures
occurring for the same Security Association are counted but
no t11FcSpSaNotifyAuthFailure notification is generated.
When this object is modified before the end of a time
window, that time window is immediately terminated, i.e.,
the next Authentication failure on the relevant Fabric
after the modification will cause a new time window to
begin with the new length."
DEFVAL { 300 }
::= { t11FcSpSaControlEntry 8 }
t11FcSpSaControlMaxNotifs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of t11FcSpSaNotifyAuthFailure
notifications to be generated per Fabric within a
t11FcSpSaControlWindow time window. Subsequent
Authentication failures occurring on the same Fabric
in the same time window are counted, but no
t11FcSpSaNotifyAuthFailure notification is generated.
When this object is modified before the end of a time
window, that time window is immediately terminated, i.e.,
the next Authentication failure on the relevant Fabric
after the modification will cause a new time window to
begin with the new length."
DEFVAL { 16 }
::= { t11FcSpSaControlEntry 9 }
t11FcSpSaControlLifeExcdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether t11FcSpSaNotifyLifeExceeded
notifications should be generated for this Fabric."
DEFVAL { true }
::= { t11FcSpSaControlEntry 10 }
t11FcSpSaControlLifeExcdSpi OBJECT-TYPE
SYNTAX T11FcSpiIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the SA that was most recently terminated
because its lifetime (in seconds or in passed bytes) was
exceeded. Such terminations include those due to
a failed attempt to renew an SA after its lifetime was
exceeded."
::= { t11FcSpSaControlEntry 11 }
t11FcSpSaControlLifeExcdDir OBJECT-TYPE
SYNTAX T11FcSaDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of frame transmission on the SA that was
most recently terminated because its lifetime (in seconds
or in passed bytes) was exceeded."
::= { t11FcSpSaControlEntry 12 }
t11FcSpSaControlLifeExcdTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the most recent termination of an SA
due to its lifetime (in seconds or in passed bytes)
being exceeded. Such terminations include those
due to a failed attempt to renew an SA after its
lifetime was exceeded."
::= { t11FcSpSaControlEntry 13 }Next up are the notifications 🔔💖 These are the actual alarms the agent raises. The auth-failure one is rate-limited per Fabric, so you don't get spammed to death 🙈
--
-- Notification definitions
--
t11FcSpSaNotifyAuthFailure NOTIFICATION-TYPE
OBJECTS { t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource,
t11FcSpSaControlDestination,
t11FcSpSaControlFrame,
t11FcSpSaControlElapsed,
t11FcSpSaControlSuppressed }
STATUS current
DESCRIPTION
"When this notification is generated, it indicates the
occurrence of an Authentication failure for a received
FC-2 or CT_IU frame. The t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource, and t11FcSpSaControlDestination
objects in the varbindlist are the frame's SPI, source and
destination addresses, respectively. t11FcSpSaControlFrame
provides the (beginning of the) frame's content if such is
available.
This notification is generated only for the first
occurrence of an Authentication failure on a Fabric within
a time window. Subsequent occurrences of an Authentication
Failure on the same Fabric within the same time window
are counted but suppressed.
The value of t11FcSpSaControlElapsed contains (a lower bound
on) the elapsed time since the last generation of this
notification for the same Fabric. The value of
t11FcSpSaControlSuppressed contains the number of
generations which were suppressed in the time window after
that last generation, or zero if unknown."
::= { t11FcSpSaMIBNotifications 1 }
t11FcSpSaNotifyLifeExceeded NOTIFICATION-TYPE
OBJECTS { t11FcSpSaControlLifeExcdSpi,
t11FcSpSaControlLifeExcdDir }
STATUS current
DESCRIPTION
"This notification is generated when the lifetime (in
seconds or in passed bytes) of an SA is exceeded, and the
SA is either immediately terminated or is terminated
because an attempt to renew the SA fails. The values of
t11FcSpSaControlLifeExcdSpi and t11FcSpSaControlLifeExcdDir
contain the SPI and direction of the terminated SA."
::= { t11FcSpSaMIBNotifications 2 }Last bit of this chunk is the conformance section 🎀 It's just the anchor points for the compliance and group OIDs, so the table of rules is coming next ✨
--
-- Conformance
--
t11FcSpSaMIBCompliances
OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 1 }
t11FcSpSaMIBGroups OBJECT IDENTIFIER ::= { t11FcSpSaMIBConformance 2 }Okay bestie, picking up right where we left off with the compliance statement and the conformance groups 💅🎀
t11FcSpSaMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
FC-SP Security Associations."
MODULE -- this module
MANDATORY-GROUPS
{ t11FcSpSaCapabilityGroup,
t11FcSpSaParamStatusGroup,
t11FcSpSaSummaryCountGroup,
t11FcSpSaProposalGroup,
t11FcSpSaDropBypassGroup,
t11FcSpSaActiveGroup,
t11FcSpSaNotifInfoGroup,
t11FcSpSaNotificationGroup
}
-- The following is an auxiliary (listed in an INDEX clause)
-- object for which the SMIv2 does not allow an OBJECT clause
-- to be specified, but for which this MIB has the following
-- compliance requirement:
-- OBJECT t11FcSpSaIfIndex
-- DESCRIPTION
-- Compliance requires support for either one of:
-- - individual interfaces using ifIndex values, or
-- - the use of the zero value.
-- Write access is not required for any objects in this MIB module:
OBJECT t11FcSpSaIfStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfReplayPrevention
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfReplayWindowSize
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaIfTerminateAllSas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropSecurityProt
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropTSelListIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropTransListIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropAcceptAlgorithm
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPropRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropDirection
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropStartType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropEndType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelPropRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransSecurityProt
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransEncryptAlg
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransEncryptKeyLen
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransIntegrityAlg
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTransRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndRCtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByStartType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByEndType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaTSelDrByRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaPairTerminate
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlAuthFailEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlWindow
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlMaxNotifs
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT t11FcSpSaControlLifeExcdEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { t11FcSpSaMIBCompliances 1 }
-- Units of Conformance
t11FcSpSaCapabilityGroup OBJECT-GROUP
OBJECTS { t11FcSpSaIfEspHeaderCapab,
t11FcSpSaIfCTAuthCapab,
t11FcSpSaIfIKEv2Capab,
t11FcSpSaIfIkev2AuthCapab
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to capabilities of FC-SP entities."
::= { t11FcSpSaMIBGroups 1 }
t11FcSpSaParamStatusGroup OBJECT-GROUP
OBJECTS { t11FcSpSaIfStorageType,
t11FcSpSaIfReplayPrevention,
t11FcSpSaIfReplayWindowSize,
t11FcSpSaIfDeadPeerDetections,
t11FcSpSaIfTerminateAllSas
}
STATUS current
DESCRIPTION
"A collection of objects containing parameters
and status information related to FC-SP entities."
::= { t11FcSpSaMIBGroups 2 }
t11FcSpSaSummaryCountGroup OBJECT-GROUP
OBJECTS { t11FcSpSaIfOutDrops,
t11FcSpSaIfOutBypasses,
t11FcSpSaIfOutProcesses,
t11FcSpSaIfOutUnMatcheds,
t11FcSpSaIfInUnprotUnmtchDrops,
t11FcSpSaIfInDetReplays,
t11FcSpSaIfInUnprotMtchDrops,
t11FcSpSaIfInBadXforms,
t11FcSpSaIfInGoodXforms,
t11FcSpSaIfInProtUnmtchs
}
STATUS current
DESCRIPTION
"A collection of objects containing summary
counters for FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 3 }
t11FcSpSaProposalGroup OBJECT-GROUP
OBJECTS { t11FcSpSaPropSecurityProt,
t11FcSpSaPropTSelListIndex,
t11FcSpSaPropTransListIndex,
t11FcSpSaPropAcceptAlgorithm,
t11FcSpSaPropOutMatchSucceeds,
t11FcSpSaPropRowStatus,
t11FcSpSaTSelPropDirection,
t11FcSpSaTSelPropStartSrcAddr,
t11FcSpSaTSelPropEndSrcAddr,
t11FcSpSaTSelPropStartDstAddr,
t11FcSpSaTSelPropEndDstAddr,
t11FcSpSaTSelPropStartRCtl,
t11FcSpSaTSelPropEndRCtl,
t11FcSpSaTSelPropStartType,
t11FcSpSaTSelPropEndType,
t11FcSpSaTSelPropStorageType,
t11FcSpSaTSelPropRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to making and accepting proposals for
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 4 }
t11FcSpSaDropBypassGroup OBJECT-GROUP
OBJECTS { t11FcSpSaTSelDrByAction,
t11FcSpSaTSelDrByStartSrcAddr,
t11FcSpSaTSelDrByEndSrcAddr,
t11FcSpSaTSelDrByStartDstAddr,
t11FcSpSaTSelDrByEndDstAddr,
t11FcSpSaTSelDrByStartRCtl,
t11FcSpSaTSelDrByEndRCtl,
t11FcSpSaTSelDrByStartType,
t11FcSpSaTSelDrByEndType,
t11FcSpSaTSelDrByMatches,
t11FcSpSaTSelDrByRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects containing information
about Traffic Selectors of traffic to drop or bypass
for FC-SP Security."
::= { t11FcSpSaMIBGroups 5 }
t11FcSpSaActiveGroup OBJECT-GROUP
OBJECTS { t11FcSpSaPairSecurityProt,
t11FcSpSaPairTransListIndex,
t11FcSpSaPairTransIndex,
t11FcSpSaPairLifetimeLeft,
t11FcSpSaPairLifetimeLeftUnits,
t11FcSpSaPairTerminate,
t11FcSpSaPairInProtUnMatchs,
t11FcSpSaPairInDetReplays,
t11FcSpSaPairInBadXforms,
t11FcSpSaPairInGoodXforms,
t11FcSpSaTransSecurityProt,
t11FcSpSaTransEncryptAlg,
t11FcSpSaTransEncryptKeyLen,
t11FcSpSaTransIntegrityAlg,
t11FcSpSaTransStorageType,
t11FcSpSaTransRowStatus,
t11FcSpSaTSelNegInInboundSpi,
t11FcSpSaTSelNegInStartSrcAddr,
t11FcSpSaTSelNegInEndSrcAddr,
t11FcSpSaTSelNegInStartDstAddr,
t11FcSpSaTSelNegInEndDstAddr,
t11FcSpSaTSelNegInStartRCtl,
t11FcSpSaTSelNegInEndRCtl,
t11FcSpSaTSelNegInStartType,
t11FcSpSaTSelNegInEndType,
t11FcSpSaTSelNegInUnpMtchDrops,
t11FcSpSaTSelNegOutInboundSpi,
t11FcSpSaTSelNegOutStartSrcAddr,
t11FcSpSaTSelNegOutEndSrcAddr,
t11FcSpSaTSelNegOutStartDstAddr,
t11FcSpSaTSelNegOutEndDstAddr,
t11FcSpSaTSelNegOutStartRCtl,
t11FcSpSaTSelNegOutEndRCtl,
t11FcSpSaTSelNegOutStartType,
t11FcSpSaTSelNegOutEndType,
t11FcSpSaTSelSpiDirection,
t11FcSpSaTSelSpiTrafSelPtr
}
STATUS current
DESCRIPTION
"A collection of objects containing information related
to currently active FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 6 }t11FcSpSaNotifInfoGroup OBJECT-GROUP
OBJECTS { t11FcSpSaControlAuthFailEnable,
t11FcSpSaControlInboundSpi,
t11FcSpSaControlSource,
t11FcSpSaControlDestination,
t11FcSpSaControlFrame,
t11FcSpSaControlElapsed,
t11FcSpSaControlSuppressed,
t11FcSpSaControlWindow,
t11FcSpSaControlMaxNotifs,
t11FcSpSaControlLifeExcdEnable,
t11FcSpSaControlLifeExcdSpi,
t11FcSpSaControlLifeExcdDir,
t11FcSpSaControlLifeExcdTime
}
STATUS current
DESCRIPTION
"A collection of objects containing information
related to notifications of events concerning
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 7 }
t11FcSpSaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { t11FcSpSaNotifyAuthFailure,
t11FcSpSaNotifyLifeExceeded
}
STATUS current
DESCRIPTION
"A collection of notifications of events concerning
FC-SP Security Associations."
::= { t11FcSpSaMIBGroups 8 }
END7. IANA Considerations 🦋
Okay so IANA made one MIB OID assignment, under the appropriate subtree, for each of the five MIB modules defined in this document. 🌸
8. Security Considerations 💀
Bestie, this is the dramatic one, so pay attention 👀 In this section, the first sub-section explains why this document does not define MIB objects for particular items of (management) information. After that comes one sub-section for each of the MIB modules defined in section 6, listing their individual Security Considerations. The section wraps up with Security Considerations common to all of these MIB modules. ✨
Quick note: the key word "RECOMMENDED" in this section is a BCP 14 key word, so read it the way BCP 14 [RFC2119] describes. 🫶
8.1. Information Not Defined in This Document 🙈
So this document doesn't define any MIB objects for the secrets that FC-SP entities need to know or figure out in order to use DH-CHAP to authenticate each other. These secrets are "highly sensitive" and need to be "strong secrets" (e.g., randomly generated and/or from an external source, see section 5.4.8 of [FC-SP]) rather than just passwords. Which means those secrets have to be managed by mechanisms other than the MIB modules defined here. 🔐
8.2. The T11-FC-SP-TC-MIB Module 🌸
This MIB module defines some data types and assigns some Object Identifiers, for use as the syntax and as values of MIB objects, respectively, but it itself defines no MIB objects. So there's no direct read or write access via a management protocol, such as SNMP, to these definitions. Still, it does include the assignment of enumerations and OIDs to represent cryptographic algorithms/transforms, and it's totally appropriate for those assignments to get new additions as and when new algorithms/transforms are available. 🧚
8.3. The T11-FC-SP-AUTHENTICATION-MIB Module 💅
There are several management objects defined in this MIB module with a MAX-ACCESS clause of read-write. Those objects can be sensitive or vulnerable in some network environments, and SET operations in a non-secure environment without proper protection can really mess with network operations. 😭 Here are the objects and their sensitivity/vulnerability:
t11FcSpAuStorageType- could cause config changes to be kept or not kept over restarts, even when management didn't want that.
t11FcSpAuSendRejNotifyEnablet11FcSpAuRcvRejNotifyEnable- could suppress SNMP notifications (e.g., of authentication failures or protocol failures), or disrupt network operations by generating unwanted notifications.
t11FcSpAuDefaultLifetimet11FcSpAuDefaultLifetimeUnits- could extend the lifetimes of Security Associations longer than might be secure, or shorten them so that using security costs more overhead.
t11FcSpAuRejectMaxRows- could make the audit trail of Authentication rejects smaller, which hides an attacker's tracks, or bigger, which wastes resources. 🕵️
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. So it's important to control even GET and/or NOTIFY access to these objects, and possibly even encrypt their values when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
t11FcSpAuEntityTable- the capabilities of FC-SP Authentication entities in terms of which cryptographic algorithms they support, plus various configuration parameters of FC-SP Authentication entities.
t11FcSpAuIfStatTable- the mapping of which FC-SP Authentication entities operate on which interfaces.
t11FcSpAuRejectTable- an audit trail of authentication failures and other Authentication Protocol failures.
8.4. The T11-FC-SP-ZONING-MIB Module 🦋
There are several management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. These can be sensitive or vulnerable in some network environments, and SET operations in a non-secure environment without proper protection can have a negative effect on network operations. Here's the tea ☕
t11FcSpZsServerEnabled- could enable or disable FC-SP Zoning mode, against the wishes of management.
t11FcSpZoneSetHashStatus- could make an FC-SP implementation recalculate the Active Zone Set Hash and the Zone Set Database Hash more often than management actually needs.
t11FcSpZsNotifyJoinSuccessEnablet11FcSpZsNotifyJoinFailureEnable- could suppress SNMP notifications that a Switch in one Fabric has successfully joined or failed to join with a Switch in another Fabric, or disrupt network operations by generating unwanted notifications.
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. So it's important to control even GET and/or NOTIFY access to these objects, and possibly even encrypt their values when sending them over SNMP. These are the objects and their sensitivity/vulnerability:
t11FcSpZsServerCapabilityObjectt11FcSpZsServerEnabled- the FC-SP Zoning capabilities and status of the FC-SP implementation.
t11FcSpZoneSetHashStatust11FcSpActiveZoneSetHashTypet11FcSpActiveZoneSetHasht11FcSpZoneSetDatabaseHashTypet11FcSpZoneSetDatabaseHash- the current values of the Active Zone Set Hash and the Zone Set Database Hash. 🔑
8.5. The T11-FC-SP-POLICY-MIB Module 🌈
There are many management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Those can be sensitive or vulnerable in some network environments, and SET operations in a non-secure environment without proper protection can have a negative effect on network operations. The objects and tables and their sensitivity/vulnerability are:
t11FcSpPoNaSummaryTablet11FcSpPoNaSwListTablet11FcSpPoNaSwMembTablet11FcSpPoNaNoMembTablet11FcSpPoNaCtDescrTablet11FcSpPoNaSwConnTablet11FcSpPoNaIpMgmtTable- could change the currently inactive FC-SP Fabric Policies, so as to allow unauthorized connectivity of Switches and/or Nodes to the network, or between Switches in the network, or to prohibit such connectivity even when it's authorized. 🚫
t11FcSpPoNaIpMgmtTablet11FcSpPoNaWkpDescrTable- could change the currently inactive FC-SP Fabric Policies, so as to allow unauthorized management access to Switches, or prohibit authorized management access to Switches.
t11FcSpPoNaSummaryTablet11FcSpPoNaSwMembTablet11FcSpPoNaNoMembTablet11FcSpPoNaAttribTablet11FcSpPoNaAuthProtTable- could change the currently inactive FC-SP Fabric Policies, so as to allow Security Associations with reduced security, or require Security Associations that are unnecessarily secure.
t11FcSpPoOperActivatet11FcSpPoOperDeActivate- could deactivate the currently active FC-SP Fabric Policies and activate the currently inactive ones instead (e.g., those modified as above). 😱
t11FcSpPoStorageType- could cause changes in the configuration and/or in FC-SP Fabric Policies to be retained or not retained over restarts, against the wishes of management.
t11FcSpPoNotificationEnable- could suppress SNMP notifications about successful or unsuccessful activation/deactivation of Fabric Policies, which hides successful or failed attempts to make unauthorized changes, or disrupt network operations by generating unwanted notifications.
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. So it's important to control even GET and/or NOTIFY access to these objects, and possibly even encrypt their values when sending them over SNMP. These are the tables and their sensitivity/vulnerability:
t11FcSpPoTablet11FcSpPoSummaryTablet11FcSpPoSwMembTablet11FcSpPoNoMembTablet11FcSpPoCtDescrTablet11FcSpPoSwConnTablet11FcSpPoIpMgmtTablet11FcSpPoWkpDescrTablet11FcSpPoAttribTablet11FcSpPoAuthProtTable- the currently active FC-SP Fabric Policies, which an attacker could examine while looking for possible security vulnerabilities in the active policies. 👀
8.6. The T11-FC-SP-SA-MIB Module ✨
Okay bestie, this one is serious 🥺. A bunch of the objects in this MIB module are read-write or read-create, which means someone can change them with SET operations. In a non-secure environment, that can really mess things up for the network, so you have to be careful with them 💅. Here's the list of what could go wrong:
t11FcSpSaIfStorageType,t11FcSpSaTSelPropStorageType,t11FcSpSaTransStorageType: changing these could make FC-SP Security Association config get saved or not saved across restarts, even when the admin didn't want that 😭.t11FcSpSaIfReplayPrevention,t11FcSpSaIfReplayWindowSize: this is the anti-replay protection. Mess with it and an attacker could pull off replay attacks 💀, or the FC-SP devices could end up doing pointless extra replay protection 🙄.t11FcSpSaIfTerminateAllSas,t11FcSpSaPairTerminate: these could abort FC-SP Security Associations that didn't need to die 🥀.t11FcSpSaControlAuthFailEnable: this one could turn off the SNMP notifications for Authentication failures on received FC-2 or CT_IU frames 🙈. That means someone trying to break the security stuff could go totally unnoticed, or you could get flooded with notifications you don't want 📢.t11FcSpSaControlLifeExcdEnable: this could stop the SNMP notifications for when a Security Association goes past its lifetime. That delays finding the problem and fixing it, which can mess with network usage 😤.t11FcSpSaControlWindow: this could hide the second and later SNMP notifications for Authentication failures, so repeated attacks get masked 👀. Or it could spam you with notifications you don't need.t11FcSpSaControlMaxNotifs: this could suppress all SNMP notifications for those Authentication failures, which hides attempts to break security. It could also flood the network with unwanted notifications 🌪️.t11FcSpSaPropTable,t11FcSpSaTSelPropTable,t11FcSpSaTransTable: these could make an FC-SP entity propose Security Associations that cover different traffic and/or use different security transforms. Some traffic might end up with weaker protection, which makes it easier for an attacker to win 😈. Or it might get more protection than it needs, which wastes processing. It could also make negotiation fail to find parameters both sides accept, so no Security Associations get set up at all 🚫.t11FcSpSaTSelDrByTable: this could make an FC-SP entity pick different sets of traffic that either a) get sent or received without FC-SP protection, which gives an attacker a way to read authentic traffic or slip in fake traffic, or b) get dropped instead of being sent or after being received, which messes with network usage 💔.
Some of the readable objects in this MIB module (the ones whose MAX-ACCESS is anything other than not-accessible) can also be sensitive or vulnerable in some environments. So it's really important to control even GET and/or NOTIFY access to them, and maybe even encrypt their values when they travel over the network via SNMP 🔐. Here are the tables and objects, and why they're sensitive:
t11FcSpSaIfTable: info about the capabilities, parameters, and status of an FC-SP entity's support for Security Associations 📋.t11FcSpSaPropTable,t11FcSpSaTSelPropTable,t11FcSpSaTransTable: info on the proposals an FC-SP entity uses to negotiate Security Associations 🤝.t11FcSpSaTSelDrByTable: info on which subsets of traffic an FC-SP entity sends or receives without FC-SP protection, or drops before sending or after receiving 🕵️.t11FcSpSaPairTable,t11FcSpSaTSelNegInTable,t11FcSpSaTSelNegOutTable,t11FcSpSaTSelSpiTable: info on which Security Associations are active right now, what traffic they carry, and what security protection they're getting 👑.
8.7. Recommendations Common to All MIB Modules 🌸
Let's talk about SNMP security, because it's a whole thing 🫶. SNMP versions before SNMPv3 just didn't have adequate security. Even if the network itself is secure (say, by using IPsec), there's still no control over who on that secure network can GET and SET (read, change, create, or delete) the objects in this MIB module 🙃.
It is RECOMMENDED that implementors look at the security features the SNMPv3 framework provides (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms for authentication and privacy 🔑.
Also, deploying SNMP versions before SNMPv3 is NOT RECOMMENDED 🚫. Instead, it is RECOMMENDED to deploy SNMPv3 and turn on the cryptographic security. Then it's on the customer or operator to make sure that the SNMP entity giving access to this MIB module is set up so only the principals (users) with legit rights can GET or SET (change, create, or delete) the objects 💼.
Here's another thing to know. The two algorithms currently specified for T11FcSpPolicyHashFormat are SHA-1 and SHA-256. Because of that, the definition of T11FcSpHashCalculationStatus raises a concern about not recomputing the hashes incrementally after each change when you're making a bunch of related changes in a row 🧮. This trick is meant to make things responsive (cooperating SNMP managers and agents can get stuff done faster). It is not meant as a Denial-of-Service (DoS) countermeasure ⚠️. Even so, implementations should still think about DoS risks in these situations. Some possible countermeasures are requiring authentication for SETs and rate-limiting SET operations if they can cause significant computation 🛡️.
9. Normative References 📚
Here are the normative references, all the details included:
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
and M. Rose, S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.(Wait, let me make sure I copy each entry exactly, so here's the full block 💖.)
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044,
May 2005.
[RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)", RFC
4303, December 2005.
[RFC4306] Kaufman, C., Ed., "Internet Key Exchange (IKEv2)
Protocol", RFC 4306, December 2005.
[RFC4438] DeSanti, C., Gaonkar, V., Vivek, H., McCloghrie, K., and
S. Gai, "Fibre-Channel Name Server MIB", RFC 4438, April
2006.
[RFC4439] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai,
"Fibre Channel Fabric Address Manager MIB", RFC 4439,
March 2006.
[RFC4936] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Zone Server MIB", RFC 4936, August 2007.
[FC-FS-2] "Fibre Channel - Framing and Signaling-2 (FC-FS-2)",
ANSI INCITS 424-2007, February 2007.
[FC-GS-5] "Fibre Channel - Generic Services-5 (FC-GS-5)",
ANSI INCITS 427-2006, December 2006.
[FC-SP] "Fibre Channel - Security Protocols (FC-SP)",
ANSI INCITS 426-2007, T11/Project 1570-D, February 2007.
[FC-SW-4] "Fibre Channel - Switch Fabric-4 (FC-SW-4)",
ANSI INCITS 418-2006, April 2006.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.10. Informative References 🦋
And here are the informative references, all in one spot 🧚:
[RFC1492] Finseth, C., "An Access Control Protocol, Sometimes Called
TACACS", RFC 1492, July 1993.
[RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco,
"Agent Extensibility (AgentX) Protocol Version 1", RFC
2741, January 2000.
[RFC2837] Teow, K., "Definitions of Managed Objects for the Fabric
Element in Fibre Channel Standard", RFC 2837, May 2000.
[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson,
"Remote Authentication Dial In User Service (RADIUS)", RFC
2865, June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J.
Arkko, "Diameter Base Protocol", RFC 3588, September 2003.
[RFC4595] Maino, F. and D. Black, "Use of IKEv2 in the Fibre Channel
Security Association Management Protocol", RFC 4595, July
2006.
[RFC4625] DeSanti, C., McCloghrie, K., Kode, S., and S. Gai, "Fibre
Channel Routing Information MIB", RFC 4625, September
2006.
[RFC4626] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "MIB
for Fibre Channel's Fabric Shortest Path First (FSPF)
Protocol", RFC 4626, September 2006.
[RFC4668] Nelson, D., "RADIUS Authentication Client MIB for IPv6",
RFC 4668, August 2006.
[RFC4747] Kipp, S., Ramkumar, G., and K. McCloghrie, "The Virtual
Fabrics MIB", RFC 4747, November 2006.
[RFC4935] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Fabric Configuration Server MIB", RFC 4935, August
2007.
[RFC4983] DeSanti, C., Vivek, H., McCloghrie, K., and S. Gai, "Fibre
Channel Registered State Change Notification (RSCN) MIB",
RFC 4983, August 2007.11. Acknowledgements 💖
okay bestie, this is the thank-you section and it's giving gratitude 🫶 This document was first developed and approved by the INCITS Task Group T11.5 (http://www.t11.org) as the SM-FSM project. They wanted to shout out the contributions and comments from the INCITS Technical Committee T11, including:
- T11 Chair: Robert Snively, Brocade
- T11 Vice Chair: Claudio DeSanti, Cisco Systems
- T11.5 Chair: Roger Cummings, Symantec
- T11.5 members:
- David Black, EMC
- Don Fraser, HP
- Larry Hofer, Brocade
- Scott Kipp, Brocade
- Ralph Weber, ENDL
Later it became a work item of the IMSS Working Group (of the IETF), chaired by David Black (EMC Corporation) ✨ Bert Wijnen (Alcatel-Lucent) deserves so many thanks for his thorough review of all five MIB modules in this (large!) document 😭 They also wanted to thank Dan Romascanu (Avaya), the IETF Area Director, for his comments and assistance 🙌
Authors' Addresses 🎀
Here's who wrote it, with their contact details, all exactly as they appear in the original:
Claudio DeSanti
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Phone: +1 408 853-9172
EMail: cds@cisco.com
Fabio Maino
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134 USA
Phone: +1 408 853-7530
EMail: fmaino@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA USA 95134
Phone: +1 408-526-5260
EMail: kzm@cisco.comFull Copyright Statement 🌈
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property 🦋
The IETF takes no position on the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document, or on whether any license under those rights might or might not be available. It also doesn't say it has made any independent effort to identify any such rights ✨ If you want the procedures for rights in RFC documents, check BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat, any assurances of licenses to be made available, or the result of an attempt to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be found in the IETF on-line IPR repository at http://www.ietf.org/ipr 💅
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology required to implement this standard. Send that information to the IETF at ietf-ipr@ietf.org 🫶
📦 where this page comes from
- ietf: rfc5324 2008-09
- 💖 girlified by claude-haiku-5-5 on : a language model's rewrite of the original, under its terms