zynqmp_pm_get_pll_frac_data(9)

zynqmp_pm_get_pll_frac_data(9) 💅✨

okay so bestie, this page is from the Kernel API Manual, and it’s literally the PM API for getting pll fraction data. lowkey tiny, highkey useful, and yes the vibes are immaculate. 🎀

🌸 NAME 🌸

zynqmp_pm_get_pll_frac_data — PM API for getting pll fraction data 💖

✨ SYNOPSIS ✨

int zynqmp_pm_get_pll_frac_data (u32 clk_id , u32 *data );

🎀 ARGUMENTS 🎀

• clk_id — PLL clock ID. that’s the clock bestie you’re asking about ⭐
• data — fraction data. yep, that’s the whole label, and it’s serving exactly what it says 🦋

🔥 DESCRIPTION 🔥

So the description is giving: this function returns fraction data value. that’s it, that’s the whole vibe. no extra lore, no hidden side quest, just fraction data value. ✨

💜 RETURN 💜

Returns status, either success or error+reason. so you get a status back: success, or an error with the reason attached. no cap. 💅

🌈 SEE ALSO 🌈

the see-also section is long and iconic, so here’s every single ref, no skips, fr fr:

• Kernel file: ./drivers/firmware/xilinx/zynqmp.c
• struct zynqmp_devinfo(9)
• struct pm_api_feature_data(9)
• zynqmp_pm_ret_code(9)
• do_fw_call_smc(9)
• do_fw_call_hvc(9)
• zynqmp_pm_feature(9)
• zynqmp_pm_is_function_supported(9)
• zynqmp_pm_invoke_fw_fn(9)
• zynqmp_pm_invoke_fn(9)
• zynqmp_pm_get_api_version(9)
• zynqmp_pm_get_chipid(9)
• zynqmp_pm_get_family_info(9)
• zynqmp_pm_get_sip_svc_version(9)
• zynqmp_pm_get_trustzone_version(9)
• get_set_conduit_method(9)
• zynqmp_pm_query_data(9)
• zynqmp_pm_clock_enable(9)
• zynqmp_pm_clock_disable(9)
• zynqmp_pm_clock_getstate(9)
• zynqmp_pm_clock_setdivider(9)
• zynqmp_pm_clock_getdivider(9)
• zynqmp_pm_clock_setparent(9)
• zynqmp_pm_clock_getparent(9)
• zynqmp_pm_set_pll_frac_mode(9)
• zynqmp_pm_get_pll_frac_mode(9)
• zynqmp_pm_set_pll_frac_data(9)
• zynqmp_pm_set_sd_tapdelay(9)
• zynqmp_pm_sd_dll_reset(9)
• zynqmp_pm_ospi_mux_select(9)
• zynqmp_pm_write_ggs(9)
• zynqmp_pm_read_ggs(9)
• zynqmp_pm_write_pggs(9)
• zynqmp_pm_read_pggs(9)
• zynqmp_pm_set_boot_health_status(9)
• zynqmp_pm_reset_assert(9)
• zynqmp_pm_reset_get_status(9)
• zynqmp_pm_fpga_load(9)
• zynqmp_pm_fpga_get_status(9)
• zynqmp_pm_fpga_get_config_status(9)
• zynqmp_pm_pinctrl_request(9)
• zynqmp_pm_pinctrl_release(9)
• zynqmp_pm_pinctrl_set_function(9)
• zynqmp_pm_pinctrl_get_config(9)
• zynqmp_pm_pinctrl_set_config(9)
• zynqmp_pm_bootmode_read(9)
• zynqmp_pm_bootmode_write(9)
• zynqmp_pm_init_finalize(9)
• zynqmp_pm_set_suspend_mode(9)
• zynqmp_pm_request_node(9)
• zynqmp_pm_release_node(9)
• zynqmp_pm_get_rpu_mode(9)
• zynqmp_pm_set_rpu_mode(9)
• zynqmp_pm_set_tcm_config(9)
• zynqmp_pm_get_node_status(9)
• zynqmp_pm_get_rpu_node_status(9)
• zynqmp_pm_force_pwrdwn(9)
• zynqmp_pm_request_wake(9)
• zynqmp_pm_start_rpu(9)
• zynqmp_pm_stop_rpu(9)
• zynqmp_pm_set_requirement(9)
• zynqmp_pm_load_pdi(9)
• zynqmp_pm_efuse_access(9)
• zynqmp_pm_register_notifier(9)
• zynqmp_pm_system_shutdown(9)
• zynqmp_pm_set_feature_config(9)
• zynqmp_pm_get_feature_config(9)
• zynqmp_pm_sec_read_reg(9)
• zynqmp_pm_sec_mask_write_reg(9)
• zynqmp_pm_set_sd_config(9)
• zynqmp_pm_set_gem_config(9)
• struct zynqmp_pm_shutdown_scope(9)
• zynqmp_pm_is_shutdown_scope_valid(9)
• zynqmp_clear_pm_state(9)

okay byeeee 🫶💖 this page came from source ./drivers/firmware/xilinx, dated October 2026, and yep, it’s your zynqmp_pm_get_pll_frac_data(9) bestie signing off. mwah 💋✨