zynqmp_pm_bootmode_write(9)

💅 zynqmp_pm_bootmode_write(9) — Kernel API Manual

okay bestie, welcome to the Kernel API Manual corner where we talk about one very specific little bootpin config call. This page is all about zynqmp_pm_bootmode_write(9), and no cap, it's giving “small function, important boot energy” 💖

---

🎀 NAME 🎀

zynqmp_pm_bootmode_write — PM Config API for Configure bootpin.

🌸 SYNOPSIS 🌸

int zynqmp_pm_bootmode_write (u32 ps_mode );

🦋 ARGUMENTS 🦋

• ps_mode — Value to be written to the bootpin ctrl register. That's the value, bestie — literally the thing going into the bootpin ctrl register ✨

🔥 DESCRIPTION 🔥

This API function is to be used for notify the power management controller to configure bootpin.

It's the call that tells the power management controller “hey, bootpin config needs doing” — that's the whole vibe of this function 🫶

⭐ RETURN ⭐

Returns status, either success or error+reason.

bestie note: the return is a status, and it can be either success or error+reason. No mysterious extra return lore here 💅

👑 SEE ALSO 👑

The kernel file is ./drivers/firmware/xilinx/zynqmp.c — and okay, the SEE ALSO cinematic universe is huge, so here is every single icon, no skips, no cap:

• struct zynqmp_devinfo(9)
• struct pm_api_feature_data(9)
• zynqmp_pm_ret_code(9)
• do_fw_call_smc(9)
• do_fw_call_hvc(9)
• zynqmp_pm_feature(9)
• zynqmp_pm_is_function_supported(9)
• zynqmp_pm_invoke_fw_fn(9)
• zynqmp_pm_invoke_fn(9)
• zynqmp_pm_get_api_version(9)
• zynqmp_pm_get_chipid(9)
• zynqmp_pm_get_family_info(9)
• zynqmp_pm_get_sip_svc_version(9)
• zynqmp_pm_get_trustzone_version(9)
• get_set_conduit_method(9)
• zynqmp_pm_query_data(9)
• zynqmp_pm_clock_enable(9)
• zynqmp_pm_clock_disable(9)
• zynqmp_pm_clock_getstate(9)
• zynqmp_pm_clock_setdivider(9)
• zynqmp_pm_clock_getdivider(9)
• zynqmp_pm_clock_setparent(9)
• zynqmp_pm_clock_getparent(9)
• zynqmp_pm_set_pll_frac_mode(9)
• zynqmp_pm_get_pll_frac_mode(9)
• zynqmp_pm_set_pll_frac_data(9)
• zynqmp_pm_get_pll_frac_data(9)
• zynqmp_pm_set_sd_tapdelay(9)
• zynqmp_pm_sd_dll_reset(9)
• zynqmp_pm_ospi_mux_select(9)
• zynqmp_pm_write_ggs(9)
• zynqmp_pm_read_ggs(9)
• zynqmp_pm_write_pggs(9)
• zynqmp_pm_read_pggs(9)
• zynqmp_pm_set_boot_health_status(9)
• zynqmp_pm_reset_assert(9)
• zynqmp_pm_reset_get_status(9)
• zynqmp_pm_fpga_load(9)
• zynqmp_pm_fpga_get_status(9)
• zynqmp_pm_fpga_get_config_status(9)
• zynqmp_pm_pinctrl_request(9)
• zynqmp_pm_pinctrl_release(9)
• zynqmp_pm_pinctrl_set_function(9)
• zynqmp_pm_pinctrl_get_config(9)
• zynqmp_pm_pinctrl_set_config(9)
• zynqmp_pm_bootmode_read(9)
• zynqmp_pm_init_finalize(9)
• zynqmp_pm_set_suspend_mode(9)
• zynqmp_pm_request_node(9)
• zynqmp_pm_release_node(9)
• zynqmp_pm_get_rpu_mode(9)
• zynqmp_pm_set_rpu_mode(9)
• zynqmp_pm_set_tcm_config(9)
• zynqmp_pm_get_node_status(9)
• zynqmp_pm_get_rpu_node_status(9)
• zynqmp_pm_force_pwrdwn(9)
• zynqmp_pm_request_wake(9)
• zynqmp_pm_start_rpu(9)
• zynqmp_pm_stop_rpu(9)
• zynqmp_pm_set_requirement(9)
• zynqmp_pm_load_pdi(9)
• zynqmp_pm_efuse_access(9)
• zynqmp_pm_register_notifier(9)
• zynqmp_pm_system_shutdown(9)
• zynqmp_pm_set_feature_config(9)
• zynqmp_pm_get_feature_config(9)
• zynqmp_pm_sec_read_reg(9)
• zynqmp_pm_sec_mask_write_reg(9)
• zynqmp_pm_set_sd_config(9)
• zynqmp_pm_set_gem_config(9)
• struct zynqmp_pm_shutdown_scope(9)
• zynqmp_pm_is_shutdown_scope_valid(9)
• zynqmp_clear_pm_state(9)

---

That's the whole page, bestie — sourced from ./drivers/firmware/xilinx, dated October 2026, and it's zynqmp_pm_bootmode_write(9) in the Kernel API Manual. Mwah 💋✨