pm8001_chip_ssp_io_req(9)

💖 NAME 💖

okay so bestie, welcome to the pm8001_chip_ssp_io_req(9) page from the Kernel API Manual — it's giving send a SSP task to FW. That's the whole vibe. ✨

✨ SYNOPSIS ✨

int pm8001_chip_ssp_io_req (struct pm8001_hba_info *pm8001_ha , struct
pm8001_ccb_info *ccb );

🫶 ARGUMENTS 🫶

• pm8001_ha — our hba card information. literally the HBA card info bag 🫶
• ccb — the ccb information this request used.

🌈 SEE ALSO 🌈

bestie, the kernel file is right here:

• Kernel file ./drivers/scsi/pm8001/pm8001_hwi.c

and these are the little icons you should also go read, no cap:

• read_main_config_table(9)
• read_general_status_table(9)
• read_inbnd_queue_table(9)
• read_outbnd_queue_table(9)
• init_default_table_values(9)
• update_main_config_table(9)
• update_inbnd_queue_table(9)
• update_outbnd_queue_table(9)
• pm8001_bar4_shift(9)
• mpi_set_phys_g3_with_ssc(9)
• mpi_set_open_retry_interval_reg(9)
• mpi_init_check(9)
• check_fw_ready(9)
• pm8001_chip_init(9)
• soft_reset_ready_check(9)
• pm8001_chip_soft_rst(9)
• pm8001_chip_iounmap(9)
• pm8001_chip_interrupt_enable(9)
• pm8001_chip_interrupt_disable(9)
• pm8001_mpi_msg_free_get(9)
• pm8001_mpi_build_cmd(9)
• pm8001_mpi_msg_consume(9)
• mpi_ssp_completion(9)
• pm8001_bytes_dmaed(9)
• pm8001_get_attached_sas_addr(9)
• pm8001_hw_event_ack_req(9)
• hw_event_sas_phy_up(9)
• hw_event_sata_phy_up(9)
• hw_event_phy_down(9)
• pm8001_mpi_reg_resp(9)
• pm8001_mpi_fw_flash_update_resp(9)
• mpi_hw_event(9)
• process_one_iomb(9)
• pm8001_chip_smp_req(9)
• pm8001_chip_phy_start_req(9)
• pm8001_chip_phy_stop_req(9)
• pm8001_chip_phy_ctl_req(9)
• pm8001_chip_isr(9)
• pm8001_chip_ssp_tm_req(9)
• pm8001_chip_fw_flash_update_build(9)

okay that's the whole page, bestie 💜 this cutie comes from source/version ./drivers/scsi/pm8001, dated October 2026, and the footer name is pm8001_chip_ssp_io_req(9). mwah 💋