pm8001_chip_phy_ctl_req(9)

💖 NAME 💖

okay so bestie, welcome to pm8001_chip_phy_ctl_req(9) from the Kernel API Manual — this one is literally all about support the local phy operation. that's the vibe. ✨

✨ SYNOPSIS ✨

int pm8001_chip_phy_ctl_req (struct pm8001_hba_info *pm8001_ha , u32
phyId , u32 phy_op );

🎀 ARGUMENTS 🎀

• pm8001_ha — our hba card information. like, the whole card-info package, no cap 💖
• phyId — the phy id which we wanted to operate. yes, the exact phy you're trying to operate 👑
• phy_op — the phy operation to request. the op itself, periodt ✨

📚 SEE ALSO 📚

Kernel file ./drivers/scsi/pm8001/pm8001_hwi.c

the whole related-calls group chat is here, bestie:

• read_main_config_table(9)
• read_general_status_table(9)
• read_inbnd_queue_table(9)
• read_outbnd_queue_table(9)
• init_default_table_values(9)
• update_main_config_table(9)
• update_inbnd_queue_table(9)
• update_outbnd_queue_table(9)
• pm8001_bar4_shift(9)
• mpi_set_phys_g3_with_ssc(9)
• mpi_set_open_retry_interval_reg(9)
• mpi_init_check(9)
• check_fw_ready(9)
• pm8001_chip_init(9)
• soft_reset_ready_check(9)
• pm8001_chip_soft_rst(9)
• pm8001_chip_iounmap(9)
• pm8001_chip_interrupt_enable(9)
• pm8001_chip_interrupt_disable(9)
• pm8001_mpi_msg_free_get(9)
• pm8001_mpi_build_cmd(9)
• pm8001_mpi_msg_consume(9)
• mpi_ssp_completion(9)
• pm8001_bytes_dmaed(9)
• pm8001_get_attached_sas_addr(9)
• pm8001_hw_event_ack_req(9)
• hw_event_sas_phy_up(9)
• hw_event_sata_phy_up(9)
• hw_event_phy_down(9)
• pm8001_mpi_reg_resp(9)
• pm8001_mpi_fw_flash_update_resp(9)
• mpi_hw_event(9)
• process_one_iomb(9)
• pm8001_chip_smp_req(9)
• pm8001_chip_ssp_io_req(9)
• pm8001_chip_phy_start_req(9)
• pm8001_chip_phy_stop_req(9)
• pm8001_chip_isr(9)
• pm8001_chip_ssp_tm_req(9)
• pm8001_chip_fw_flash_update_build(9)

xoxo, your kernel bestie 💅 — source/version ./drivers/scsi/pm8001, date October 2026, from the Kernel API Manual 🫶✨