nand_select_target(9)

okay so welcome to the nand_select_target(9) page from the Kernel API Manual 💖 this one is short, sweet, and very "pick the right die bestie" energy. let's get into it ✨

✨ NAME ✨

• nand_select_target — Select a NAND target (A.K.A. die) 👑

🫶 SYNOPSIS 🫶

void nand_select_target (struct nand_chip *chip , unsigned int cs );

💖 ARGUMENTS 💖

• chip — NAND chip object 🫶 the little guy we're working with.
• cs — the CS line to select. Quick note, bestie: this CS id is always from the chip PoV, not the controller one 👀

🌸 DESCRIPTION 🌸

Select a NAND target so that further operations executed on chip go to the selected NAND target. That's the whole vibe: choose your target, and the ops on chip go there. slay ✨

🦋 SEE ALSO 🦋

Kernel file ./drivers/mtd/nand/raw/nand_base.c is the home base 🏠 and the whole friend group is:

• nand_extract_bits(9), nand_deselect_target(9), nand_release_device(9), nand_bbm_get_next_page(9), nand_block_bad(9), nand_region_is_secured(9), nand_get_device(9), nand_check_wp(9), nand_fill_oob(9), nand_do_write_oob(9), nand_default_block_markbad(9), nand_markbad_bbm(9), nand_block_markbad_lowlevel(9), nand_block_isreserved(9), nand_block_checkbad(9)
• nand_soft_waitrdy(9), nand_gpio_waitrdy(9), panic_nand_wait(9), nand_reset_interface(9), nand_setup_interface(9), nand_choose_best_sdr_timings(9), nand_choose_best_nvddr_timings(9), nand_choose_best_timings(9), nand_choose_interface_config(9), nand_fill_column_cycles(9), nand_read_page_op(9), nand_read_param_page_op(9), nand_change_read_column_op(9), nand_read_oob_op(9), nand_prog_page_begin_op(9), nand_prog_page_end_op(9)
• nand_prog_page_op(9), nand_change_write_column_op(9), nand_readid_op(9), nand_status_op(9), nand_exit_status_op(9), nand_erase_op(9), nand_set_features_op(9), nand_get_features_op(9), nand_reset_op(9), nand_read_data_op(9), nand_write_data_op(9), struct nand_op_parser_ctx(9), nand_op_parser_must_split_instr(9), nand_op_parser_match_pat(9), nand_op_parser_exec_op(9)
• nand_subop_get_addr_start_off(9), nand_subop_get_num_addr_cyc(9), nand_subop_get_data_start_off(9), nand_subop_get_data_len(9), nand_reset(9), nand_get_features(9), nand_set_features(9), nand_read_page_raw_notsupp(9), nand_read_page_raw(9), nand_monolithic_read_page_raw(9), nand_read_page_raw_syndrome(9), nand_read_page_swecc(9), nand_read_subpage(9), nand_read_page_hwecc(9), nand_read_page_hwecc_oob_first(9)
• nand_read_page_syndrome(9), nand_transfer_oob(9), nand_setup_read_retry(9), nand_do_read_ops(9), nand_read_oob_std(9), nand_read_oob_syndrome(9), nand_write_oob_std(9), nand_write_oob_syndrome(9), nand_do_read_oob(9), nand_read_oob(9), nand_write_page_raw_notsupp(9), nand_write_page_raw(9), nand_monolithic_write_page_raw(9), nand_write_page_raw_syndrome(9)
• nand_write_page_swecc(9), nand_write_page_hwecc(9), nand_write_subpage_hwecc(9), nand_write_page_syndrome(9), nand_write_page(9), nand_do_write_ops(9), panic_nand_write(9), nand_write_oob(9), nand_erase(9), nand_erase_nand(9), nand_sync(9), nand_block_isbad(9), nand_block_markbad(9), nand_suspend(9), nand_resume(9)
• nand_shutdown(9), nand_lock(9), nand_unlock(9), rawnand_dt_parse_gpio_cs(9), nand_scan_ident(9), nand_check_ecc_caps(9), nand_match_ecc_req(9), nand_maximize_ecc(9), nand_ecc_choose_conf(9), nand_scan_tail(9), nand_scan_with_ids(9), nand_cleanup(9)

mwah 💖 this page lives under ./drivers/mtd/nand/raw, it's dated October 2026, and it's literally nand_select_target(9) — bye bestie! 🫶