lpfc_sli4_post_sgl(9)

💅 lpfc_sli4_post_sgl — Kernel API Manual, section 9 🎀

Okay bestie, gather round, because this one is the kernel-side baddie that literally drops a scatter gather list for an XRI onto the HBA. Yes, that's the whole vibe. It's in section 9 of the Kernel API Manual, and it's giving "low-level driver internals, but make it iconic."

---

✨ NAME ✨

lpfc_sli4_post_sgl — Post scatter gather list for an XRI to HBA 🦋

---

🌸 SYNOPSIS 🌸

int lpfc_sli4_post_sgl (struct lpfc_hba *phba , dma_addr_t pdma_phys_addr0 , dma_addr_t pdma_phys_addr1 , uint16_t xritag );

---

💖 ARGUMENTS 💖

• phba — the virtual port that this call is being executed for. Like, whose port are we doing this for, bestie? That one. 🫶
• pdma_phys_addr0 — the physical address of the 1st SGL page. First baddie on the roster. ✨
• pdma_phys_addr1 — the physical address of the 2nd SGL page. Second baddie, optional-ish, more on that below. 🎀
• xritag — the xritag that ties this io to the SGL pages. It's literally the little string that connects them, iykyk. 🧵

---

🔥 DESCRIPTION 🔥

So what this routine does: it posts the sgl pages for the IO that has the xritag that is in the iocbq structure. That tag? Assigned during iocbq creation, and it persists for as long as the driver is loaded. No cap, it sticks around. 👑

Now here's the part you actually need to remember, bestie:

• if the caller has fewer than 256 scatter gather segments to map, then pdma_phys_addr1 should be 0. Yes, zero. Not a real address. Zero. 💀
• If the caller needs to map more than 256 scatter gather segment, then pdma_phys_addr1 should be a valid physical address. Like, an actual one. 🌈
• physical address for SGLs must be 64 byte aligned. This is not a suggestion, this is the vibe check you must pass. 📏
• If you are going to map 2 SGL's, then the first one must have 256 entries, and the second sgl can have between 1 and 256 entries. That's the split, periodt. 💅

Return codes: 0 - Success, -ENXIO, -ENOMEM - Failure. So a zero is your slay moment, and the negative ones are... not. 😭

---

⭐ SEE ALSO ⭐

Kernel file ./drivers/scsi/lpfc/lpfc_sli.c — and honestly, the entire friend group is here:

lpfc_sli4_pcimem_bcopy(9), lpfc_sli4_wq_put(9), lpfc_sli4_wq_release(9), lpfc_sli4_mq_put(9), lpfc_sli4_mq_release(9), lpfc_sli4_eq_get(9), lpfc_sli4_eq_clr_intr(9), lpfc_sli4_if6_eq_clr_intr(9), lpfc_sli4_write_eq_db(9), lpfc_sli4_if6_write_eq_db(9), lpfc_sli4_cq_get(9), lpfc_sli4_write_cq_db(9), lpfc_sli4_if6_write_cq_db(9), lpfc_cmd_iocb(9), lpfc_resp_iocb(9), __lpfc_sli_get_iocbq(9), __lpfc_clear_active_sglq(9), __lpfc_get_active_sglq(9), lpfc_clr_rrq_active(9), lpfc_handle_rrq_active(9), lpfc_get_active_rrq(9), lpfc_cleanup_vports_rrqs(9), lpfc_test_rrq_active(9), lpfc_set_rrq_active(9), __lpfc_sli_get_els_sglq(9), __lpfc_sli_get_nvmet_sglq(9), lpfc_sli_get_iocbq(9), __lpfc_sli_release_iocbq_s4(9), __lpfc_sli_release_iocbq_s3(9), __lpfc_sli_release_iocbq(9), lpfc_sli_release_iocbq(9), lpfc_sli_cancel_iocbs(9), lpfc_sli_iocb_cmd_type(9), lpfc_sli_ring_map(9), lpfc_sli_ringtxcmpl_put(9), lpfc_sli_ringtx_get(9), lpfc_cmf_sync_cmpl(9), lpfc_issue_cmf_sync_wqe(9), lpfc_sli_next_iocb_slot(9), lpfc_sli_next_iotag(9), lpfc_sli_submit_iocb(9), lpfc_sli_update_full_ring(9), lpfc_sli_update_ring(9), lpfc_sli_resume_iocb(9), lpfc_sli_next_hbq_slot(9), lpfc_sli_hbqbuf_free_all(9), lpfc_sli_hbq_to_firmware(9), lpfc_sli_hbq_to_firmware_s3(9), lpfc_sli_hbq_to_firmware_s4(9), lpfc_sli_hbqbuf_fill_hbqs(9), lpfc_sli_hbqbuf_add_hbqs(9), lpfc_sli_hbqbuf_init_hbqs(9), lpfc_sli_rqbuf_get(9), lpfc_sli_hbqbuf_find(9), lpfc_sli_free_hbq(9), lpfc_sli_chk_mbx_command(9), lpfc_sli_wake_mbox_wait(9), lpfc_sli_def_mbox_cmpl(9), lpfc_sli_handle_mb_event(9), lpfc_sli_get_buff(9), lpfc_nvme_unsol_ls_handler(9), lpfc_complete_unsol_iocb(9), lpfc_sli_process_unsol_iocb(9), lpfc_sli_iocbq_lookup(9), lpfc_sli_iocbq_lookup_by_tag(9), lpfc_sli_process_sol_iocb(9), lpfc_sli_rsp_pointers_error(9), lpfc_poll_eratt(9), lpfc_sli_handle_fast_ring_event(9), lpfc_sli_sp_handle_rspiocb(9), lpfc_sli_handle_slow_ring_event(9), lpfc_sli_handle_slow_ring_event_s3(9), lpfc_sli_handle_slow_ring_event_s4(9), lpfc_sli_abort_iocb_ring(9), lpfc_sli_abort_fcp_rings(9), lpfc_sli_flush_io_rings(9), lpfc_sli_brdready_s3(9), lpfc_sli_brdready_s4(9), lpfc_sli_brdready(9), lpfc_reset_barrier(9), lpfc_sli_brdkill(9), lpfc_sli_brdreset(9), lpfc_sli4_brdreset(9), lpfc_sli_brdrestart_s3(9), lpfc_sli_brdrestart_s4(9), lpfc_sli_brdrestart(9), lpfc_sli_chipset_init(9), lpfc_sli_hbq_count(9), lpfc_sli_hbq_entry_count(9), lpfc_sli_hbq_size(9), lpfc_sli_hbq_setup(9), lpfc_sli4_rb_setup(9), lpfc_sli_config_port(9), lpfc_sli_hba_setup(9), lpfc_sli4_read_fcoe_params(9), lpfc_sli4_read_rev(9), lpfc_sli4_get_ctl_attr(9), lpfc_sli4_retrieve_pport_name(9), lpfc_sli4_arm_cqeq_intr(9), lpfc_sli4_get_avail_extnt_rsrc(9), lpfc_sli4_chk_avail_extnt_rsrc(9), lpfc_sli4_cfg_post_extnts(9), lpfc_sli4_alloc_extent(9), lpfc_sli4_dealloc_extent(9), lpfc_ras_stop_fwlog(9), lpfc_sli4_ras_dma_free(9), lpfc_sli4_ras_dma_alloc(9), lpfc_sli4_ras_mbox_cmpl(9), lpfc_sli4_ras_fwlog_init(9), lpfc_sli4_ras_setup(9), lpfc_sli4_alloc_resource_identifiers(9), lpfc_sli4_dealloc_resource_identifiers(9), lpfc_sli4_get_allocated_extnts(9), lpfc_sli4_repost_sgl_list(9), lpfc_sli4_repost_io_sgl_list(9), lpfc_init_idle_stat_hb(9), lpfc_rx_monitor_create_ring(9), lpfc_rx_monitor_destroy_ring(9), lpfc_rx_monitor_record(9), lpfc_rx_monitor_report(9), lpfc_cmf_setup(9), lpfc_get_platform_uuid(9), lpfc_sli4_hba_setup(9), lpfc_mbox_timeout(9), lpfc_sli4_mbox_completions_pending(9), lpfc_sli4_process_missed_mbox_completions(9), lpfc_mbox_timeout_handler(9), lpfc_sli_issue_mbox_s3(9), lpfc_sli4_async_mbox_block(9), lpfc_sli4_async_mbox_unblock(9), lpfc_sli4_wait_bmbx_ready(9), lpfc_sli4_post_sync_mbox(9), lpfc_sli_issue_mbox_s4(9), lpfc_sli4_post_async_mbox(9), lpfc_sli_issue_mbox(9), lpfc_mbox_api_table_setup(9), __lpfc_sli_ringtx_put(9), lpfc_sli_next_iocb(9), __lpfc_sli_issue_iocb_s3(9), __lpfc_sli_issue_fcp_io_s3(9), __lpfc_sli_issue_fcp_io_s4(9), __lpfc_sli_issue_iocb_s4(9), lpfc_sli_api_table_setup(9), lpfc_sli4_calc_ring(9), lpfc_sli_issue_iocb(9), lpfc_extra_ring_setup(9), lpfc_sli_async_event_handler(9), lpfc_sli4_setup(9), lpfc_sli_setup(9), lpfc_sli4_queue_init(9), lpfc_sli_queue_init(9), lpfc_sli_mbox_sys_flush(9), lpfc_sli_host_down(9), lpfc_sli_hba_down(9), lpfc_sli_pcimem_bcopy(9), lpfc_sli_bemem_bcopy(9), lpfc_sli_ringpostbuf_put(9), lpfc_sli_get_buffer_tag(9), lpfc_sli_ring_taggedbuf_get(9), lpfc_sli_ringpostbuf_get(9), lpfc_sli_abort_els_cmpl(9), lpfc_ignore_els_cmpl(9), lpfc_sli_issue_abort_iotag(9), lpfc_sli_hba_iocb_abort(9), lpfc_sli_validate_fcp_iocb_for_abort(9), lpfc_sli_validate_fcp_iocb(9), lpfc_sli_sum_iocb(9), lpfc_sli_abort_fcp_cmpl(9), lpfc_sli_abort_iocb(9), lpfc_sli_abort_taskmgmt(9), lpfc_sli_wake_iocb_wait(9), lpfc_chk_iocb_flg(9), lpfc_sli_issue_iocb_wait(9), lpfc_sli_issue_mbox_wait(9), lpfc_sli_mbox_sys_shutdown(9), lpfc_sli_eratt_read(9), lpfc_sli4_eratt_read(9), lpfc_sli_check_eratt(9), lpfc_intr_state_check(9), lpfc_sli_sp_intr_handler(9), lpfc_sli_fp_intr_handler(9), lpfc_sli_intr_handler(9), lpfc_sli4_els_xri_abort_event_proc(9), lpfc_sli4_els_preprocess_rspiocbq(9), lpfc_sli4_sp_handle_async_event(9), lpfc_sli4_sp_handle_mbox_event(9), lpfc_sli4_sp_handle_mcqe(9), lpfc_sli4_sp_handle_els_wcqe(9), lpfc_sli4_sp_handle_rel_wcqe(9), lpfc_sli4_sp_handle_abort_xri_wcqe(9), lpfc_sli4_sp_handle_rcqe(9), lpfc_sli4_sp_handle_cqe(9), lpfc_sli4_sp_handle_eqe(9), __lpfc_sli4_process_cq(9), __lpfc_sli4_sp_process_cq(9), lpfc_sli4_sp_process_cq(9), lpfc_sli4_dly_sp_process_cq(9), lpfc_sli4_fp_handle_fcp_wcqe(9), lpfc_sli4_fp_handle_rel_wcqe(9), lpfc_sli4_nvmet_handle_rcqe(9), lpfc_sli4_fp_handle_cqe(9), __lpfc_sli4_hba_process_cq(9), lpfc_sli4_hba_process_cq(9), lpfc_sli4_hba_handle_eqe(9), lpfc_sli4_dly_hba_process_cq(9), lpfc_sli4_hba_intr_handler(9), lpfc_sli4_intr_handler(9), lpfc_sli4_queue_free(9), lpfc_sli4_queue_alloc(9), lpfc_dual_chute_pci_bar_map(9), lpfc_modify_hba_eq_delay(9), lpfc_eq_create(9), lpfc_sli4_hba_intr_handler_th(9), lpfc_cq_create(9), lpfc_cq_create_set(9), lpfc_mq_create_fb_init(9), lpfc_mq_create(9), lpfc_wq_create(9), lpfc_rq_create(9), lpfc_mrq_create(9), lpfc_eq_destroy(9), lpfc_cq_destroy(9), lpfc_mq_destroy(9), lpfc_wq_destroy(9), lpfc_rq_destroy(9), lpfc_sli4_alloc_xri(9), __lpfc_sli4_free_xri(9), lpfc_sli4_free_xri(9), lpfc_sli4_next_xritag(9), lpfc_sli4_post_sgl_list(9), lpfc_sli4_post_io_sgl_block(9), lpfc_sli4_post_io_sgl_list(9), lpfc_fc_frame_check(9), lpfc_fc_hdr_get_vfi(9), lpfc_fc_frame_to_vport(9), lpfc_update_rcv_time_stamp(9), lpfc_cleanup_rcv_buffers(9), lpfc_rcv_seq_check_edtov(9), lpfc_fc_frame_add(9), lpfc_sli4_abort_partial_seq(9), lpfc_sli4_abort_ulp_seq(9), lpfc_sli4_seq_abort_rsp_cmpl(9), lpfc_sli4_xri_inrange(9), lpfc_sli4_seq_abort_rsp(9), lpfc_sli4_handle_unsol_abort(9), lpfc_seq_complete(9), lpfc_prep_seq(9), lpfc_sli4_handle_received_buffer(9), lpfc_sli4_post_all_rpi_hdrs(9), lpfc_sli4_post_rpi_hdr(9), lpfc_sli4_alloc_rpi(9), __lpfc_sli4_free_rpi(9), lpfc_sli4_free_rpi(9), lpfc_sli4_remove_rpis(9), lpfc_sli4_resume_rpi(9), lpfc_sli4_init_vpi(9), lpfc_mbx_cmpl_add_fcf_record(9), lpfc_sli4_add_fcf_record(9), lpfc_sli4_build_dflt_fcf_record(9), lpfc_sli4_fcf_scan_read_fcf_rec(9), lpfc_sli4_fcf_rr_read_fcf_rec(9), lpfc_sli4_read_fcf_rec(9), lpfc_check_next_fcf_pri_level(9), lpfc_sli4_fcf_rr_next_index_get(9), lpfc_sli4_fcf_rr_index_set(9), lpfc_sli4_fcf_rr_index_clear(9), lpfc_mbx_cmpl_redisc_fcf_table(9), lpfc_sli4_redisc_fcf_table(9), lpfc_sli4_fcf_dead_failthrough(9), lpfc_sli_get_config_region23(9), lpfc_sli4_get_config_region23(9), lpfc_sli_read_link_ste(9), lpfc_log_fw_write_cmpl(9), lpfc_wr_object(9), lpfc_cleanup_pending_mbox(9), lpfc_drain_txq(9), lpfc_wqe_bpl2sgl(9), lpfc_sli4_issue_wqe(9), lpfc_sli4_issue_abort_iotag(9), lpfc_snapshot_mxp(9), lpfc_adjust_pvt_pool_count(9), lpfc_adjust_high_watermark(9), lpfc_move_xri_pvt_to_pbl(9), _lpfc_move_xri_pbl_to_pvt(9), lpfc_move_xri_pbl_to_pvt(9), lpfc_keep_pvt_pool_above_lowwm(9), lpfc_release_io_buf(9), lpfc_get_io_buf_from_private_pool(9), lpfc_get_io_buf_from_expedite_pool(9), lpfc_get_io_buf_from_multixri_pools(9), lpfc_get_io_buf(9), lpfc_read_object(9), lpfc_get_sgl_per_hdwq(9), lpfc_put_sgl_per_hdwq(9), lpfc_free_sgl_per_hdwq(9), lpfc_get_cmd_rsp_buf_per_hdwq(9), lpfc_put_cmd_rsp_buf_per_hdwq(9), lpfc_free_cmd_rsp_buf_per_hdwq(9), lpfc_sli_prep_wqe(9)

---

Anyway bestie, that's the whole page — go post those SGL pages, keep your addresses 64 byte aligned, and remember: zero is a valid pdma_phys_addr1 when you're under 256 segments, and that is iconic. 🦋✨

Source/version: ./drivers/scsi/lpfc — dated October 2026, from the lpfc_sli4_post_sgl(9) page. Mwah, love u, bye! 💖🎀